Innovation

Starts HERE!
Engine Rebuilding Equipment

RMC ETS-100
ENGINE TEST SYSTEM
The RMC-ETS100 is an accurate and dependable solution to systematically test and
identify most common mechanical malfunctions encountered by engine builders,
assuring your products will exceed your customers’ expectations.

This new innovative design offers complete freedom to customize the operator digital
control panel with manual and fully automated testing programs, utilizing the latest
electronics, sensors and controls to collect pertinent data for input to the onboard
computer and output to the screen, USB or Network locations for analysis or printing.

Dedicated to serving your engine rebuilding equipment needs, since 1957

 INSTRUMENTATION WITH GRAPHICAL
GAUGES AND BUTTONS
• Full 15” LCD Digital touch screen for ease of set up for
monitoring testing functions.
• Temperature, filter condition and flow monitored on screen.
• Crankshaft rotation angle graph displayed on screen.
• Movable Control panel allows operation of the machine
from the right or left hand side.

FULL 15" DIGITAL TOUCH SCREEN

SAFETY & VISIBILITY

• Extremely fast loading with adjustable block cradles and
four-point clamping.
• Two 30” x 20” removable Lexan safety guards provide safe
operation during all testing cycles.

TESTING CAPABILITIES (In Suggested Order)

• Vacuum Test of coolant system for potential leak down.
(No Crankshaft Rotation)
• Pre-Torque Test for pre-lubing and checking oil flows to all
components, unbalanced noises, loose components.
• Torque Test for crankshaft loads looking for improper fit
of most moving components.
• Run-In Test for checking oil pressure (PSI) and flow (GPM)
utilizing heated filtered oil also excessive leakage and
missing plugs.
EASY ACCESS WORK AREA • Compression Test-reads all cylinders (PSI) to the screen
as Pass/Fail with a Retest option on each cylinder.

POWER DRIVE SYSTEM

• Infinitely variable speed, reversible, constancy torque drive
motor system. Digital motor drive delivers accurate linear
torque/load reporting for all rpm ranges.
• A heavy duty telescoping drive shaft with quick connect
coupler to the universal crankshaft adaptor provides easy
setup.

QUICK ATTACH DRIVE SYSTEM

 AVAILABLE OPTIONS

8 (Opt. 10) COMPRESSION

CONNECTIONS Quickly connect and test up to
10 cylinders at the same time for efficient, automated
and accurate compression test results.

BAR CODE SCANNER

Allows you to scan and keep the most accurate
information about the engines you are rebuilding.

ACTIVE FUEL MANAGEMENT

TESTING (DoD, MDS, AFM) (5.7L Hemi
shown) is an effective way to test whether the
cylinders are deactivating properly.

REMOTE OIL PAN

Works great for testing the engines actual oil pump to detect
improper functioning oil system.

NEED TO TEST DIESEL ENGINES?

RMC has your total diesel testing solution...
Diesel build equipped with 15HP motor.

Remote oil pressure

sensor is used in
conjunction with the
remote oil pan to
verify the actual oil
pressure being pro-
duced at set RPM.
 Test Results Run In Screen

Torque Test Screen Compression Test Screen

RMC ETS-100 SPECIFICATIONS

BASIC MACHINE SPECIFICATIONS BASIC MACHINE SPECIFICATIONS
Model number ETS-100 (54 Inch)
Model number ETS-100 (65 Inch)
Machine Weight Machine1500 Lbs/659 Kg
Weight 1780 Lbs/807 Kg
Main Drive Motor 7.5 HP
Main Drive Motor 7.5 HP
Voltage Voltage208 – 240 VAC 208 – 240 VAC
Phase Phase 3 Phase, 3-wire 3 Phase, 3-wire
Cycle Cycle 60 Hz 60 Hz
Amps Amps 45 FLA 45 FLA
Oil Capacity 10 Gallons/37.8 Liter
Oil Capacity 13 Gallons/49.2 Liter
Air Pressure 110 PSI @ 5 CFM
Air Pressure 110 PSI @ 5 CFM
Floor Space Recommended 150” xRecommended
Floor Space 90”/3810 mm x 2286 mm 160” x 90”/4064 mm x 2286 mm
Shipping Weight Shipping1900 Lbs/862 Kg
Weight 2180 Lbs/989 Kg
Shipping Size Shipping96” L x 54” W x 52” H
Size 111” L x 54” W x 53” H
PERFORMANCE PERFORMANCE
Test Engine Max weight 1,200Max
Test Engine Lbsweight 1,200 Lbs
Test Engine Max Length 45 Inches
Test Engine Max Length 53 Inches
Test Engine Max Width 30 Inches
Test Engine Max Width 30 Inches
Test Engine Max Height 40 Inches
Test Engine Max Height 40 Inches
Max Test RPM Max Test300 RPM
RPM 300 RPM
Max Compression Level 500 Lbs Level
Max Compression 500 Lbs
Max Vacuum 20 Hg
Max Vacuum 20 Hg
Oil Tank Temperature Oil Tank100-110 F
Temperature 100-110 F
Max Oil Flow Max Oil6Flow
GPM 6 GPM
Max Oil Pressure Max Oil60 Lbs
Pressure 60 Lbs

US & Canada 800.248.5062

5775 Bridgeview Center | Saginaw, MI 48604
Phone: 989.754.3611 | Fax: 989.754.1696
Engine Rebuilding Equipment www.rmcengine.com
In order to bring you the most advanced features as soon as possible, all features, descriptions and technical specifications are subject to change