InteliGen 200

Order code: IG3200XXBAA

Parallel gen-set controller
Datasheet
Product description
Comprehensive paralleling gen-set controller Up to 5 languages in the controller
Parallel operation for up to 32 gen-sets Configurable MODBUS
Direct communication with ECU Support of MODBUS RTU/TCP* or SNMP* v1/v2c
Remote control and monitoring Detailed history with up to 350 events
Flexible, extendable, yet user friendly Load shedding, dummy load capability
Tier 4 Final support
Key features Automatic temperature based cooling/heating
Multiple Island or Single Parallel to Mains applications
Comprehensive gen-set protections
both in one controller
Multipurpose flexible timers with full calendar
PLC support with PLC editor and monitor
True RMS measurement
Perfect solution for rental applications:
Low temperature version available (IG3200XXBLA)
Rental timers
*Available with extension module
Geofencing and tracking via WebSupervisor*

Alternative configuration
Application overview
Droop and Emergency droop
Load sharing and VAr sharing via CAN
Wide communication capabilities including

Integrated USB for configuration

Isolated RS485 port on board for MODBUS

Integrated USB Host for uploading/downloading

FW/Configuration with USB key
High accuracy of voltage and current measurement
Cloud-based monitoring and control
Active SMS and emails in different languages*

| InteliGen 200 Datasheet | Related HW ver: 1.0.0 | Related SW ver: 1.1.0 | Date of issue: 5/20/2019
 Dimensions, terminals and mounting

Note: The final depth of the controller depends on the selected extension module – it can vary between 41 and
56 smm. Mind also a size of connector and cables (e.g. in case of RS232 connector add about another 60 mm
for standard RS232 connector and cable).

InteliGen 200 Datasheet 2

 Technical data
Power supply Binary inputs
Power supply range 8-36 V DC Number 8, non-isolated
320 mA / 8 V DC Close/Open 0-2 V DC close contact
indication 6-36 V DC open contact
Power consumption 210 mA / 12 V DC
(without modules) 120 mA / 24 V DC Binary outputs
90 mA / 36 V DC
8, non-isolated
RTC battery Replaceable Number
(2 high current + 6 low current)
4 A w/o BOUT
Fusing power BO 1, 2 = 4 A
consumption Max. current
BO 3-8 = 0.5 A
Fusing ESTOP 12 A Switching to Positive supply terminal
Max. Power Dissipation 9W
Analog inputs
D+
Number 4, Resistive
Max. excitation current 250 mA Resolution 0.1 Ω
Charging fail threshold 80 % of Usupply Range 0-2500 Ω
Input
Operating conditions 170 Ω
impedance
Standard version: -20 ˚C to +70 ˚C ±2 % from value in range 0-2500 Ω
Operation temperature
LT version: -40 ˚C to +70 ˚C
Accuracy ±1.5 % for full temperature range (1 %
Storage temperature -30 ˚C to +80 ˚C
from 0 ˚C to 50 ˚C)
Operating humidity 95 % w/o condensation
Protection degree Voltage regulator output
IP 65
(front p.)
Protection Isolated
5-25 Hz, ± 1.6 mm
Vibration Type max ± 10 V DC
25-100 Hz, a = 4 g
Shocks a = 500 m/s 2 Speed governor output
Surrounding air temperature rating 70 °C. ± 10 VDC or 5 V @ 500 Hz
Output type
Suitable for pollution degree 2. PWM selectable by jumper
Protection Non-isolated
Voltage measurement
Measurement inputs 3 ph-n Gen voltage , 3 ph-n Mains Magnetic pick-up
277 V / 480 V AC (EU) Minimum input 4 Vpk-pk to 50 Vpk-pk in range
Measurement range
346 V / 600 V AC (US/Canada) voltage 4 Hz to 1 kHz
Linear measurement 6 Vpk-pk to 50 Vpk-pk in range 1 kHz
381 V / 660 V
and protection range Working voltage to 5 kHz
Accuracy 1% range 10 Vpk-pk to 50 Vpk-pk in range 4 Hz
Frequency range 40-70 Hz (accuracy 0.1 Hz) to 10 kHz

Input impedance 0.72 MΩ ph-ph , 0.36 MΩ ph-n Frequency input

4 Hz to 10 kHz
range
Current measurement Frequency
measurement 0.2 % from range 10 kHz
Measurement inputs 3ph Gen current, 1ph Mains current
tolerance
Measurement range 5A
Max. allowed current 10 A Communications
±1.5 % for full temperature range (1 % USB device Non-isolated type B connector
Accuracy
from 0 ˚C to 50 ˚C)
USB host Non-isolated type A connector
Input impedance <0.1 Ω
RS 485 Isolated

Display CAN 1 + CAN 2

Isolated, 250 / 50 kbps
Nominal impedance 120 Ω
Type Build-in monochromatic 3.2"
Resolution 132 × 64 px

E-Stop
Dedicated terminal for safe Emergency Stop input.
Physically disconnects BO 1 & BO 2 from power supply.

InteliGen 200 Datasheet 3

 Available extension plug-in modules
Product Description Order code

CM-4G-GPS GSM modem / 4G wireless internet and GPS locator CM14GGPSXBX

CM-Ethernet Ethernet interface CM2ETHERXBX

CM-GPRS GSM modem / GPRS wireless internet CM2GPRSXXBX

CM-RS232-485 Dual port interface CM223248XBX

EM-BIO8-EFCP 8 additional binary inputs/outputs; current measurement EM2BIO8EXBX

Note: Maximally 2 plug-in modules can be connected in the same time.

Available extension CAN modules

Product Description Order code

Inteli AIN8 8 Analog Input Channels and 1 RPM/Impulse Input Module I-AIN8

Inteli AIN8TC 8 Analog Input Channels for termocouples measurement I-AIN8TC

Inteli IO8/8 16 Configurable Binary Inputs/Outputs and Analog Outputs Module I-IO8/8

IGL-RA15 Remote Annunciator w/ 15 programmable LEDs EM2IGLRABAA

IGS-PTM Up to 12 additional Analog/Binary Input/Output Module IGS-PTM

Note: Maximally 5 CAN modules can be connected in the same time.

Functions and protections

The described product fully supports the following functions and protections as defined by ANSI (American
National Standards Institute):
Description ANSI code Description ANSI code
Synchronism check 25 Earth fault current* 50N + 64
Under voltage 27 Overcurrent (IDMT) 51
Overload 32 Power factor 55
Load shedding 32P Over voltage 59
Reserve power 32R Gas (fuel) level 71
Excitation loss 40 Vector shift 78
Current unbalance 46 Over frequency 81H
Voltage asymmetry and Phase rotation 47 Under frequency 81L
Temperature 49T ROCOF 81R
Generator overcurrent 50

Note: *An additional module is required

EN 61000-6-2
EN 61000-6-4
EN 61010-1
EN 60068-2-1 (-20 °C/16 h for std version)
EN 60068-2-2 (70 °C/16 h)
EN 60068-2-6 (2÷25 Hz / ±1,6 mm; 25÷100 Hz / 4,0 g)
EN 60068-2-27 (a=500 m/s2; T=6 ms)
EN 60068-2-30:2005 25/55°C, RH 95%, 48hours
EN 60529 (front panel IP65, back side IP20)

Manufacturer:
ComAp a.s.
Czech Republic E-mail: info@comap-control.com
Phone: +420 246 012 111 Web: www.comap-control.com

© ComAp. Features and specification are subject to change without prior notice.