Professional Documents
Culture Documents
RT Duroid 6006 6010 Laminate Data Sheet
RT Duroid 6006 6010 Laminate Data Sheet
com
Data Sheet
1.6000
Features
High dielectric constant for circuit size reduction. Low loss. Ideal for operating at X-band or below. Low Z-axis expansion for RT/duroid 6010LM. Provides reliable plated through holes in multilayer boards. Low moisture absorption for RT/duroid 6010LM. Reduces effects of moisture on electrical loss. Tight r and thickness control for repeatable circuit performance. Space Saving Circuitry Patch Antennas Satellite Communications Systems Power Ampliers Aircraft Collision Avoidance Systems Ground Radar Warning Systems
RT/duroid 6006/6010LM microwave laminates are ceramic-PTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6006 laminate is available with a dielectric constant value of 6.15 and RT/duroid 6010LM laminate has a dielectric constant of 10.2. RT/duroid 6006/6010LM microwave laminates feature ease of fabrication and stability in use. They have tight dielectric constant and thickness control, low moisture absorption, and good thermal mechanical stability. RT/duroid 6006 laminates are supplied clad both sides with oz. to 2 oz./ft2 (9 to 70 m) electrodeposited copper foil. RT/duroid 6010 laminates are supplied clad both sides with 5 micron (0.025 (0.625mm) dielectric thickness only) to 2 oz./ft.2 ( 5 to 70 m) electrodeposited (ED) copper foil. Cladding with rolled copper foil is also available. Thick aluminum, brass, or copper plate on one side may be specied. Standard tolerance dielectric thicknesses of 0.010, 0.025, 0.050, 0.075, and 0.100 (0.254, 0.635, 1.270, 1.905, 2.54 mm) are available. When ordering RT/duroid 6006 and RT/duroid 6010LM laminates, it is important to specify dielectric thickness, electrodeposited or rolled, and weight of copper foil required.
Typical Values
Typical Value [2] Property
[3]Dielectric Constant r Dissipation Factor, tan Thermal Coefcient of r Surface Resistivity Volume Resistivity Youngs Modulus under tension ultimate stress ultimate strain Youngs Modulus under compression ultimate stress ultimate strain Flexural Modulus ultimate stress Deformation under load Moisture Absorption Density Thermal Conductivity Thermal Expansion Td Specic Heat Copper Peel Flammability Rating Lead-Free Process Compatible 1069 (155) 54 (7.9) 33 2634 (382) 1951 (283) 38 (5.5) 0.33 2.10 0.05 2.7 0.49 47 34, 117 500 0.97 (0.231) 14.3 (2.5) 94V-0 Yes 2144 (311) 47 (6.9) 25 4364 (633) 3751 (544) 36 (5.2) 32 (4.4) 0.26 1.37 0.05 3.1 0.78 24 24,47 500 1.00 (0.239) 12.3 (2.1) 94V-0 Yes X Y,Z Z Z Z X X Y Z Z 627 (91) 517 (75) 20 (2.8) 17 (2.5) 12 to 13 4 to 6 931 (135) 559 (81) 17 (2.4) 13 (1.9) 9 to 15 7 to 14 X Y X Y X Y RT/duroid 6006 6.15 0.15 0.0027 -410 7X10
7
Direction
Z Z Z
Units [1]
Condition
10 GHz/A 10 GHz/A
Test Method
IPC-TM-650 2.5.5.5 IPC-TM-650 2.5.5.5 IPC-TM-650 2.5.5.5 IPC 2.5.17.1 IPC 2.5.17.1
-50 to 170C A A
2X107
5X105
A A
A ASTM D790 A 24 hr/ 50C/7MPa 24 hr/150C/7MPa 24 hr/23C, 0.050( 1.27mm) thick ASTM D621 IPC-TM-650, 2.6.2.1 ASTM D792
23 to 100C 0 to 100C
IPC-TM-650 2.4.8 UL
[1] SI unit given rst with other frequently used units in parentheses. [2] References: APR4022.33 DJS 4019.27-32, Internal TR 2610. Tests were at 23C unless otherwise noted. Typical values should not be used for specication limits. [3] Dielectric constant is based on .025 dielectric thickness, one ounce electrodeposited copper on two sides. Typical values are a representation of an average value for the population of the property. For specication values contact Rogers Corporation.
STANDARD THICKNESS:
0.005 (0.127mm) 0.010 (0.254mm) 0.025 (0.635mm) 0.050 (1.27mm) 0.075 (1.90mm) 0.100 (2.50mm)
CONTACT INFORMATION:
USA: Belgium: Japan: Taiwan: Korea: Singapore: China:
Rogers Advanced Circuit Materials Rogers BVBA - Gent Rogers Japan Inc. Rogers Taiwan Inc. Rogers Korea Inc. Rogers Technologies Singapore Inc. Rogers (Shanghai) International Trading Co., Ltd
Tel: 480-961-1382 Tel: 32-9-2353611 Tel: 81-3-5200-2700 Tel: 886-2-86609056 Tel: 82-31-716-6112 Tel: 65-747-3521 Tel: 86 21 62175599
Fax: 480-961-4533 Fax: 32-9-2353658 Fax: 81-3-5200-0571 Fax: 886-2-86609057 Fax: 82-31-716-6208 Fax: 65-747-7425 Fax: 86 21 62677913
The information in this data sheet is intended to assist you in designing with Rogers circuit material laminates. It is not intended to and does not create any warranties express or implied, including any warranty of merchantability or tness for a particular purpose or that the results shown on this data sheet will be achieved by a user for a particular purpose. The user should determine the suitability of Rogers circuit material laminates for each application. These commodities, technology and software are exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law prohibited. RT/duroid, The world runs better with Rogers. and the Rogers logo are licensed trademarks for Rogers Corporation. 1991, 1992, 1994, 1995, 1998, 2002, 2005, 2006, 2007, 2008, 2009 Rogers Corporation, Printed in U.S.A. All rights reserved. Revised 12/2009 0890-1209-.5CC Publication: #92-105