Polytron 2 XP Tox Pi 9044328 en

Dräger Polytron 2 XP Tox
Fixed Gas Detector
The Dräger Polytron 2 XP Tox is an explosion proof gas detector

for continuous monitoring of toxic gases and oxygen in ambient
air. The transmitter converts the signal from an electrochemical
sensor to a 4 to 20 mA analog or HART® or RS 485 digital
signal output. The unit is designed for one-man calibration, and
ST-1413-2006
offers a variety of diagnostics and self test features.
The configuration and calibration of the DRÄGERSENSOR TECHNOLOGY

transmitter is menu guided and easy to High sensitivity, long term stability and no
perform, using either the infrared remote false alarms are the hallmark of the new
control, the built-in push buttons, or a and improved third generation of sensors.
HART® hand held terminal. With the Sensors are the keystones of any gas
optional relays, Dräger Polytron 2 XP Tox detection system. Fastest response to
can be operated as ‘stand alone’ unit. the target gas combined with minimal
interference by other gases or environ-
ST-1392-2006
EASY TO INSTALL mental influences (no false alarms) as well as

The enclosure provides two mounting the sensor life-time determine the reliability
holes. For easy wiring, the electronics is and the operating cost of a system. Dräger Polytron 2 XP Tox
Electrochemical sensor to
enclosed in a ‘bucket’, and can be pulled
detect toxic gases and oxygen.
out as one unit, held by a tether. The three STAND ALONE SYSTEM
wire cable, fed through a sealed conduit, With the three built-in relays, Dräger
is terminated in a pluggable connector at Polytron 2 XP Tox can be used as
the printed circuit board. an independent stand alone unit. Two
adjustable gas alarm levels and a fault
ONE MAN CALIBRATION alarm make it convenient to switch
All setup and maintenance can be warning devices on-site, without having to
performed without opening the transmitter run cables back and forth to a central
or declassifying the hazardous area. An controller. The sensor signal can still
infrared remote control, beaming through be transmitted using either the 4 to
the window, gives full access to the menu 20 mA, HART® or RS 485 signal output.
and calibration procedure. The menu can
also be accessed using the built-in push FEATURES/BENEFITS
buttons or a HART® hand held terminal. – DrägerSensor® technology
All menu items and messages are – Fast, accurate response
displayed in plain English. Other, user – Non-intrusive calibration
selectable languages are French, Spanish – Backlit LC-Display
and German. – 4 to 20mA, HART®, RS 485 interface
– Multidrop capability, reduced wiring costs
– Optional relays on board
– ATEX, UL and CSA approved
02 | DRÄGER POLYTRON 2 XP TOX
TECHNICAL DATA
90 44 328 | 06.10-1 | Marketing Communications | GM | PR | Printed in Germany | Chlorine-free – environmentally compatible | Subject to modifications | © 2010 Dräger Safety AG & Co. KGaA
Type Explosion proof transmitter
Gases and Ranges Toxic gases and oxygen in user selectable ranges (see sensor data sheet)
Display Backlit LCD; 2 lines, 20 characters Menu structure and messages in real text
Signal Output Analog Normal operation 4 to 20 mA
Warning, configurable fault signal every 10 s for 1 s, or off; user programmable
Maintenance 4 ± 1 mA 1 Hz modulation, or steady; user programmable
Fault < 1.2 mA
Digital HART®, RS 485
Relays (optional) Two alarm relays, one fault relay SPDT; user programmable
Rating: 5A 230 VAC, 5A 30 VDC
Supply Voltage 10 to 32 VDC, 3-wire
Ambient Conditions Temperature – 40 to + 150 °F / – 40 to + 65 °C
Pressure 20.7 to 38.4 inch Hg / 700 to 1300 mbar
Humidity 0 to 100 %RH (see sensor data sheet)
Enclosure NEMA 4X & 7, IP 66; 3/4" NPT female conduit entry
Size (h x w x d, approx.) 10 3/4" x 5" x 5" / 275 x 130 x 130 mm
Weight (approx.) 5.3 lbs / 2.4 kg
Approvals UL, CSA Class I, Div 1, Group B, C, D
ATEX II 2G EEx d [ia] IIC T6/T4, II 3D IP66 T85°C; – 40 ≤ Tamb ≤ + 40 / + 65 °C
CE-mark electromagnetic compatibility (directive 89/336/EEC)
HART® is registered trademark of HCF, Austin, TX
ORDER INFORMATION
Dräger Polytron 2 XP Tox without sensor and relays; UL, CSA, ATEX version 45 43 070
Dräger Polytron 2 XP Tox without sensor, with relays; UL, CSA, ATEX version 45 43 200
HEADQUARTERS:
Dräger Safety AG & Co. KGaA
Revalstrasse 1
23560 Lübeck, Germany
www.draeger.com
SYSTEM CENTERS: GERMANY SINGAPORE USA

Dräger Safety AG & Co. KGaA Draeger Safety Asia Pte Ltd Draeger Safety, Inc.
P. R. CHINA Revalstrasse 1 67 Ayer Rajah Crescent #06-03 505 Julie Rivers, Suite 150
Beijing Fortune Draeger Safety 23560 Lübeck Singapore 139950 Sugar Land, TX 77478
Equipment Co., Ltd. Tel +49 451 882-2794 Tel +65 68 72 92 88 Tel +1 281 498 10 82
A22 Yu An Rd, B Area, Fax +49 451 882-4991 Fax +65 65 12 19 08 Fax +1 281 498 51 90
Tianzhu Airport Industrial Zone,
Shunyi District, FRANCE UNITED KINGDOM
Beijing 101300 Dräger Safety France SAS Draeger Safety UK Ltd.
Tel +86 10 80 49 80 00 3c route de la Fédération, BP 80141 Blyth Riverside Business Park
Fax +86 10 80 49 80 05 67025 Strasbourg Cedex 1 Blyth, Northumberland NE24 4RG
Tel +33 3 88 40 59 29 Tel +44 1670 352 891
Fax +33 3 88 40 76 67 Fax +44 1670 544 475

Polytron 2 XP Tox Pi 9044328 en

Uploaded by

Copyright:

Available Formats

Polytron 2 XP Tox Pi 9044328 en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Polytron 2 XP Tox Pi 9044328 en

Uploaded by

Copyright:

Available Formats

Dräger Polytron 2 XP Tox

Fixed Gas Detector

The Dräger Polytron 2 XP Tox is an explosion proof gas detector

The configuration and calibration of the DRÄGERSENSOR TECHNOLOGY

EASY TO INSTALL mental influences (no false alarms) as well as

SYSTEM CENTERS: GERMANY SINGAPORE USA

You might also like