SIPROTEC 7KE85 Profile
SIPROTEC 7KE85 Profile
SIPROTEC 7KE85 Profile
Fault Recorder
www.siemens.com/siprotec
Description
Powerful fault recorders with integrated measurement of
synchrophasors (PMU) according to IEEE C37.118 and
power quality measurement according to IEC 61000-4-30.
Due to the great flexibility of trigger functions, the
SIPROTEC 7KE85 is ideally suited for monitoring the entire
energy value added chain, from generation to distribution.
The powerful automation and flexible configuration with
DIGSI 5 complements the range of functions.
• Usable as Phasor Measurement Unit (PMU) according • Trigger functions via a combination of single-point,
to IEEE C37.118 protocol doublepoint indications, analog values, binary signals,
Boolean signals and GOOSE messages
• Transmission of the records and triggering via
IEC 61850 GOOSE messages • Consistent monitoring concept
• Variable sampling frequencies parameterizable • Auxiliary functions for easy tests and commissioning
between 1 kHz and 16 kHz • Special test mode for commissioning
• Distribution of the mass storage of 16 GB to the • Integrated electrical Ethernet RJ45 for DIGSI 5 and
various recorders by the user as desired IEC 61850 (reporting and GOOSE)
• Intelligent monitoring routines of the storage medium • Redundancy protocols PRP and HSR
ensure a high level of availability and completeness • Cyber security to NERC CIP and BDWE Whitepaper
for the archived data requirements
• Lossless data compression
• Up to 4 pluggable communication modules usable for
• Time synchronization via Precision Time Protocol (PTP) different and redundant protocols
IEEE 1588 protocol, IRIG-B, DCF77, and SNTP
• Intelligent terminal technology enables prewiring and
• Routing of the measured values to the individual a simple device replacement
recorders as desired
Benefits
• Combination of the measuring groups for the power
calculation as desired • Clearly organized documentation and focused analysis
of power system processes and failures
• Quality attributes for representing the instantaneous
signal quality in the time signal view • Data security and transparency over the entire
lifecycle of the plant save time and money
• Trigger functions of a function block are fundamental
component value, RMS value, zero-sequence, positive- • Purposeful and simple operation of the devices and
sequence, negative-sequence system power, frequen- software thanks to user-friendly design
cy power, Σ activepower and Σ reactive power • Increased reliability and quality of the engineering
• Level trigger and gradient trigger for every trigger process
function • Powerful communication components ensure safe and
• Flexible cross trigger and system trigger, manual effective solutions
trigger • Full compatibility between IEC 61850 Editions 1
• Creation of independent trigger functions with the and 2
graphic automation editor CFC (continuous function • Highly available Ethernet communication due to inte-
chart) grated Ethernet redundancy protocols PRP and HSR