Republic of the Philippines

Misamis University
College of Engineering & Technology
Department of Civil Engineering
5R2R+386, H.T. Feliciano St, Ozamiz City, 7200 Misamis Occidental

CE 321C: Principles of Steel Design

S.Y. 2022-2023, 2nd Semester

Republic of the Philippines

Mindanao State University - Iligan Institute of Technology
College of Engineering & Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351E-mail:fbalagao@yahoo.com
Homepage: http://www.msuiit.edu.ph/coe

CE A161: Design of Concrete Structures I

S.Y. 2016-2017 Second Semester

Activity # 4
Analysis of Doubly Reinforced Beam

Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.

Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa

Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:

a. Depth of compression block

b. Ultimate moment capacity of the beam
c. Minimum and maximum tension steel areas permitted by the code

Problem 3: A reinforcedActivity No.:

concrete 2 has a width of 375 mm and effective depth of 650
beam .

mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement

contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
Shear and
Determine Tension Bolted Connection
the following:
(Sample Problems)
a. Depth of compression block
b. Ultimate moment capacity of the beam
Example 1:
ID NO.: c. Minimum and maximum tension steel
NAME: area permitted by the SHEET:
DATE: code

Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
 Republic of the Philippines
Misamis University
College of Engineering & Technology
Department of Civil Engineering
5R2R+386, H.T. Feliciano St, Ozamiz City, 7200 Misamis Occidental

CE 321C: Principles of Steel Design

S.Y. 2022-2023, 2nd Semester

Republic of the Philippines

Mindanao State University - Iligan Institute of Technology
College of Engineering & Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351E-mail:fbalagao@yahoo.com
Homepage: http://www.msuiit.edu.ph/coe

CE A161: Design of Concrete Structures I

S.Y. 2016-2017 Second Semester

Activity # 4
Analysis of Doubly Reinforced Beam

Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.

Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa

Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:

a. Depth of compression block

b. Ultimate moment capacity of the beam
c. Minimum and maximum tension steel areas permitted by the code

A W 16 xProblem
58 is connected to W 18 concrete
3: A reinforced x 31. Usebeam
A-36has a width of 375 mm and effective depth of 650
steel Fy = 248 MPa.mm.Allowable, shearing stress Fv
Tension reinforcement consists= 0.40of 6 – 28 mm Ø while compression reinforcement
Fy. contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
A 502 gradeDetermine
hot driventherivets has an allowable
following:
shearing stress of 152 MPa and allowable bearing stress of
1.2 Fu (NSCP). Thea.support
Depthisoftocompression
be designed using the
block
full strength of W 16b.
x 58Ultimate
beam based
momenton the gross section.
capacity of the beam
Fu
ID NO.:= 400 MPa. c.
NAME:Minimum and maximum tension steel area permitted by the SHEET:
DATE: code

Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
 Republic of the Philippines
Misamis University
College of Engineering & Technology
Department of Civil Engineering
5R2R+386, H.T. Feliciano St, Ozamiz City, 7200 Misamis Occidental

CE 321C: Principles of Steel Design

S.Y. 2022-2023, 2nd Semester

Republic of the Philippines

Mindanao State University - Iligan Institute of Technology
College of Engineering & Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351E-mail:fbalagao@yahoo.com
Homepage: http://www.msuiit.edu.ph/coe

CE A161: Design of Concrete Structures I

S.Y. 2016-2017 Second Semester

Activity # 4
Analysis of Doubly Reinforced Beam

Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.

Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa

Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:

a. Depth of compression block

b. Ultimate moment capacity of the beam
c. Minimum and maximum tension steel areas permitted by the code
Properties of sections:
WProblem W 18 x 31
16 x 58 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
d=403mm.mm Tension reinforcement Flangeconsists
thickness
of 6= –1128
mmmm Ø while compression reinforcement
Web thickness
contains 2= –1025mm
mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
a. Compute the minimum
Determinediameter of rivets not to exceed allowable shear stress.
the following:
b. Compute the minimum diameter of rivets not to exceed allowable bearing stress.
c. Compute the minimum
a. Depth diameter of rivets.
of compression block
b. Ultimate moment capacity of the beam
ID NO.: c. Minimum and maximum tension steel
NAME: area permitted by the SHEET:
DATE: code
SOLUTION:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
 Republic of the Philippines
Misamis University
College of Engineering & Technology
Department of Civil Engineering
5R2R+386, H.T. Feliciano St, Ozamiz City, 7200 Misamis Occidental

CE 321C: Principles of Steel Design

S.Y. 2022-2023, 2nd Semester

Republic of the Philippines

Mindanao State University - Iligan Institute of Technology
College of Engineering & Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351E-mail:fbalagao@yahoo.com
Homepage: http://www.msuiit.edu.ph/coe

CE A161: Design of Concrete Structures I

S.Y. 2016-2017 Second Semester

Activity # 4
Analysis of Doubly Reinforced Beam

Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.

Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa

Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:

a. Depth of compression block

b. Ultimate moment capacity of the beam
a. Min. diameterc.of Minimum and
rivets not to maximum
exceed tension
allowable steel
shear areas permitted by the code
stress.
V=0.40FyProblem
(d) tw 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
V=0.40(248) contains
(403) (10)
2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
V = 399,776 Nfor both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
Determine the following:

a. Depth of compression block

b. Ultimate moment capacity of the beam
ID NO.: c. Minimum and maximum tension steel
NAME: area permitted by the SHEET:
DATE: code

Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
 Republic of the Philippines
Misamis University
College of Engineering & Technology
Department of Civil Engineering
5R2R+386, H.T. Feliciano St, Ozamiz City, 7200 Misamis Occidental

CE 321C: Principles of Steel Design

S.Y. 2022-2023, 2nd Semester

Republic of the Philippines

Mindanao State University - Iligan Institute of Technology
College of Engineering & Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351E-mail:fbalagao@yahoo.com
Homepage: http://www.msuiit.edu.ph/coe

CE A161: Design of Concrete Structures I

S.Y. 2016-2017 Second Semester

Activity # 4
Analysis of Doubly Reinforced Beam

Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.

Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa

Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:

a. Depth of compression block

b. Ultimate moment capacity of the beam
b. By shearing ofc.rivets
Minimum
on the and
W 16maximum tension
x 58 (double steel areas permitted by the code
shear)
2
π d 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
Problem
R = Ss (4)(2)
mm.4 Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains
399,776 = 152 ¿)(4)(2)2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both
d = 20.46 compression
say 22 mm∅ and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
Determine the following:

c. Min. diametera.of Depth

rivets not to exceed allowable
of compression block bearing stress.
b. Ultimate moment capacity of the beam
ID NO.: c.FuMinimum
NAME:
= 400 MPa
and maximum tension steel area permitted by the SHEET:
DATE: code

Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
 Republic of the Philippines
Misamis University
College of Engineering & Technology
Department of Civil Engineering
5R2R+386, H.T. Feliciano St, Ozamiz City, 7200 Misamis Occidental

CE 321C: Principles of Steel Design

S.Y. 2022-2023, 2nd Semester

Republic of the Philippines

Mindanao State University - Iligan Institute of Technology
College of Engineering & Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351E-mail:fbalagao@yahoo.com
Homepage: http://www.msuiit.edu.ph/coe

CE A161: Design of Concrete Structures I

S.Y. 2016-2017 Second Semester

Activity # 4
Analysis of Doubly Reinforced Beam

Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.

Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa

Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:

a. Depth of compression block

b. Ultimate moment capacity of the beam
c.Sb Minimum
= 1.2 Fu and maximum tension steel areas permitted by the code
Sb = 3:
Problem 1.2A(400)
reinforced concrete beam has a width of 375 mm and effective depth of 650
mm.
Sb =Tension
480 reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
399,776N = 480(d)(10)(4)
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
Determine the following:
d= 20.8 say 22 mm∅
a. Depth of compression block
Min. diameter of rivets.
b. Ultimate moment capacity of the beam
ID NO.: c. Minimum and maximum tension steel
NAME: area permitted by the SHEET:
DATE: code

Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
 Republic of the Philippines
Misamis University
College of Engineering & Technology
Department of Civil Engineering
5R2R+386, H.T. Feliciano St, Ozamiz City, 7200 Misamis Occidental

CE 321C: Principles of Steel Design

S.Y. 2022-2023, 2nd Semester

Republic of the Philippines

Mindanao State University - Iligan Institute of Technology
College of Engineering & Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351E-mail:fbalagao@yahoo.com
Homepage: http://www.msuiit.edu.ph/coe

CE A161: Design of Concrete Structures I

S.Y. 2016-2017 Second Semester

Activity # 4
Analysis of Doubly Reinforced Beam

Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.

Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa

Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:

a. Depth of compression block

b. Ultimate moment capacity of the beam
Use 22 mm∅ c. Minimum and maximum tension steel areas permitted by the code

Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
Determine the following:

a. Depth of compression block

b. Ultimate moment capacity of the beam
ID NO.: c. Minimum and maximum tension steel
NAME: area permitted by the SHEET:
DATE: code

Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following: