Model DL
Model DL
+ Features
! Non-clog operation
Non-clog semi-open impeller prevents clogging by fibrous matter.
! Large range of models
Models up to 300mm discharge size and 22 kW available.
! Robust construction
Rugged cast iron construction, all fasteners of stainless steel and a 4 pole motor.
! Double mechanical seal in oil chamber
An oil lubricated double mechanical seal with lower faces of hard silicon carbide provides
strong and reliable shaft sealing
! In built motor protection
Quick acting dual response overloads provides protection against overload, lock or open
phase for sizes up to 7.5 kW. Models 11 kW and above have miniature thermal protectors.
! Automatic operation
All models up to 1.5 kW are available as automatic (A' type) or parallel alternating (J' type)
pumps with inbuilt controls and float switches. No need for separate control panels, simply
connect to power source.
+ Applications
! Sewage
! Waste water
! Storm water drainage
Standard Optional
Scope Discharge 65, 80, 200 – 300 mm
Motor Power 1.5, 5.5 – 22 kW (3phase)
Performance Capacity : 0.07 – 12 m³/min
Head : 3 – 39 m.
Liquid Type Sewage
Maximum 40° C (Manual and A Type)
temperature 32° C (J’ Type)
Max. solids refer to table below
Submergence Maximum 8m
Minimum Refer to low water level (L.W.L.) in dimensions.
Construction Impeller Non-clog semi-open
Mechanical Oil lubricated, double mechanical seal
Seal (single spring 1.5 kW)
(tandem spring 5.5 to 22 kW)
Materials Casing Cast Iron
Impeller Cast Iron
Suction Cover Cast Iron
Shaft 403 Stainless Steel
Motor Frame Cast Iron
Fasteners 304 Stainless Steel
Mechanical Upper Faces : Carbon / Ceramic
Seal Lower Faces : Silicon Carbide / Silicon Carbide
Lubricating Oil: Turbine Oil VG32 (SAE10W/20W)
Motor Type Air filled dry submersible, IP68, Class F insulation
Nominal 4 pole 1450 rpm
Speed
Applicable 380/400/415 volts 3 phase 50 Hz
Voltages
Starting DOL (up to 7.5 kW) Star-Delta (11 to 22 kW)
Protection In built overload protection (up to 7.5 kW)
Miniature thermal protector (11 to 22 kW)
Bearings Pre lubricated sealed ball bearings
Cable Length 10m
Accessories Flange Discharge elbow with screwed companion flange
Quick Discharge
Connector (QDC)
Solids Handling
Model - discharge 65 Ø 80 Ø 200 Ø 250 Ø 300 Ø
- motor kW 1.5 1.5 All All All
Max. Diameter of Solids 40 mm 46 mm 75~76 mm 79 mm 88 mm
Max. Length of Fibers 195 mm 240 mm 500 mm 550 mm 600 mm
60 -1
DL - 50 Hz - 1450 min
50
40
30
DML
20
20
0D
52
L
Total Head (m)
2
51
15
8
51
5
25 2
65 DDL
0D
LA
52
DLJ 51.5
L
51
1
10
51
8
30
9
0D
51
8
L
52
5
2
7
57
80
51
.5
DD
D LAL
1
6 LJ
51
51
8
.5
51
5
5
57
55
.5
.5
51
1
4
2
0.05 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 4.0 5.0 6.0 8.0 10 15
Capacity (m³/min)
Model code
80 DLA 5 1.5
A
C D
E
J
B
DA
H
Note:
L1
1/. L.W.L (Low Water Level) Is limited to 10
minutes operation at low water level.
2/. Is limited to 30 minutes operation
with water level below top of motor.
Size Output
DA Model KW A B C D E F H J L1 CL Weight
65 65 DL 51.5 1.5 497 291 353 144 265 200 576 200 140 10 m 52 kg
80 80 DL 51.5 1.5 524 292 378 146 285 220 597 210 165 10 m 55 kg
200 DL 55.5 5.5 832 430 615 217 450 414 826 300 285 10 m 160 kg
200 DL 57.5 7.5 863 453 635 228 470 410 809 320 285 10 m 176 kg
200 DL 511 11 863 453 635 228 470 410 908 320 285 10 m 212 kg
200
200 DL 515 15 896 479 655 241 490 411 995 340 285 10 m 260 kg
200 DL 518 18.5 932 512 675 257 510 415 1001 360 285 10 m 305 kg
200 DL 522 22 932 512 675 257 510 415 1001 360 285 10 m 330 kg
250 DL 57.5 7.5 969 525 700 269 500 622 904 370 400 10 m 260 kg
250 DL 511 11 993 541 720 273 520 634 1000 390 400 10 m 320 kg
250 250 DL 515 15 1007 549 730 277 530 646 1086 400 400 10 m 380 kg
250 DL 518 18.5 1007 549 730 277 530 646 1089 400 400 10 m 420 kg
250 DL 522 22 1007 549 730 277 530 646 1089 400 400 10 m 440 kg
300 DL 511 11 1100 588 798 302 575 671 1050 420 450 10 m 365 kg
300 DL 515 15 1100 588 798 302 575 671 1131 420 450 10 m 395 kg
300
300 DL 518 18.5 1135 618 818 317 595 668 1131 440 450 10 m 440 kg
300 DL 522 22 1135 618 818 317 595 668 1131 440 450 10 m 465 kg
Units: mm unless otherwise specified
DT
B
L2
DA
H
Note: DA DE DF DG DT DN DD
1/. L.W.L (Low Water Level) Is limited to
F
L1
10 minutes operation at low water level. 65 150 175 116 18 4 15
2/. Is limited to 30 minutes operation 80 150 185 126 18 8 15
with water level below top of motor.
Size Output
DA Model KW A B C D E F H J K1 L1 L2 CL Weight
65 65 DLA 51.5 1.5 497 291 353 144 265 200 662 200 840 320 860 10 m 55 kg
80 80 DLA 51.5 1.5 524 292 378 146 285 220 683 210 840 320 860 10 m 58 kg
Units: mm unless otherwise specified
B
K1
DA
L4
H
Submersible cable
L.W.L. Length CL
Stop Level
Note: DA DE DF DG DT DN DD
1/. L.W.L (Low Water Level) Is limited to
F
Size Output
DA Model KW A B C D E F H J K1 L3 L4 L5 CL Weight
65 65 DLJ 51.5 1.5 497 291 353 144 265 200 662 200 950 290 780 970 10 m 55 kg
80 80 DLJ 51.5 1.5 524 292 378 146 285 220 683 210 950 290 780 970 10 m 58 kg
Units: mm unless otherwise specified
700
pump are used with the QDC.
Bolt 3/. The weight in dimension tables
2-M12x30 refers only to the weight of the
QDC.
140
60 4/. Standard accessories supplied
40 with QDC include:-
20
50
70
Guide Pipe Length
Discharge Flange
(JIS 10kgf/cm²)
DF
L-H3
L
DE
G2 G1 DG
DT
DA
4- ØD1 140 P2 P1
E1 L.W.L.
No.DN - ØDD
Holes - Off Center
L1
H2
F
40
H1
DA DE DF DG DT DN DD
L6
63 100
QDC
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 D1 E1 Model Weight
65 DL 51.5 464 75 95 120 160 250 145 190 240 140 50 75 95 12 140 LM65 14 kg
80 DL 51.5 481 75 90 125 165 285 175 230 280 165 65 75 90 15 155 LM80 17 kg
Units: mm unless otherwise specified
700
pump are used with the QDC.
Bolt 3/. The weight in dimension tables
2-M12x30 refers only to the weight of the
QDC.
140
60 4/. Standard accessories supplied
40 with QDC include:-
20
50
70
Guide Pipe Length
Discharge Flange
(JIS 10kgf/cm²)
DF
L-H3
L
DE
G2 G1 DG
DT
DA
L2
4- ØD1 140 P2 P1
L.W.L.
E1 Stop Level
No.DN - ØDD
Holes - Off Center
L1
H2
F
40
H1
DA DE DF DG DT DN DD
L6
63 100
QDC
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L2 L6 BN1 BN2 D1 E1 Model Weight
65 DLA 51.5 464 75 95 120 160 250 145 190 240 320 860 50 75 95 12 140 LM65 14 kg
80 DLA 51.5 481 75 90 125 165 285 175 230 280 320 860 65 75 90 15 155 LM80 17 kg
Units: mm unless otherwise specified
700
pump are used with the QDC.
Bolt 3/. The weight in dimension tables
2-M12x30 refers only to the weight of the
QDC.
140
60 4/. Standard accessories supplied
40 with QDC include:-
20
50
Starting
Discharge Flange
(JIS 10kgf/cm²)
DF
L-H3
L
DE
L5
G2 G1 DG
DT
L4
DA
4- ØD1 140 P2 P1
E1 L.W.L.
Stop Level No.DN - ØDD
Holes - Off Center
L3
H2
F
40
H1
DA DE DF DG DT DN DD
L6
63 100
QDC
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L3 L4 L5 L6 BN1 BN2 D1 E1 Model Weight
65 DLJ 51.5 464 75 95 120 160 250 145 190 240 290 780 970 50 75 95 12 140 LM65 14 kg
80 DLJ 51.5 481 75 90 125 165 285 175 230 280 290 780 970 65 75 90 15 155 LM80 17 kg
Units: mm unless otherwise specified
Minimum manhole DM
Note:
dimensions in floor
frame installation 90 A
1/. For detailed dimensions of the
pumps, refer to separate dimension
data sheets.
I
Bolt 3/. The weight in dimension tables
2-M16x30 refers only to the weight of the
QDC.
268
150 4/. Standard accessories supplied
with QDC include:-
30
70
160
Guide Pipe Length
Discharge Flange
(JIS 10kgf/cm²)
DF
L-H3
L
DE
G DG
DT
DA
BW P2 P1
4- ØD1
E1 L.W.L.
No.DN - ØDD
Holes - Off Center
L1
H2
F
H1
40
DA DE DF DG DT DN DD
L6
4-M16
Anchor bolt
BN2 BM BN1
63 BY1
QDC
Pump Model A P1 P2 G F H1 H2 H3 L1 L6 BN1 BN2 BM BP BY1 BW DM I D1 E1 Model Weight
200 DL 55.5 672 155 205 355 495 320 405 475 285 81 60 60 390 170 300 350 1100 800 16 250 LL150 80 kg
200 DL 57.5 703 155 205 355 495 320 405 475 285 85 60 60 390 170 300 350 1100 800 16 250 LL150 80 kg
200 DL 511 703 155 205 355 495 320 405 475 285 85 60 60 390 170 300 350 1100 800 16 250 LL150 80 kg
200 DL 515 736 155 205 355 495 320 405 475 285 84 60 60 390 170 300 350 1100 800 16 250 LL150 80 kg
200 DL 518 772 155 205 355 495 320 405 475 285 80 60 60 390 170 300 350 1100 800 16 250 LL150 80 kg
200 DL 522 772 155 205 355 495 320 405 475 285 80 60 60 390 170 300 350 1100 800 16 250 LL150 80 kg
Units: mm unless otherwise specified
Minimum manhole DM
Note:
dimensions in floor
frame installation 120 A
1/. For detailed dimensions of the
pumps, refer to separate dimension
data sheets.
I
Bolt 3/. The weight in dimension tables
2-M20x40 refers only to the weight of the
QDC.
440
200 4/. Standard accessories supplied
with QDC include:-
30
70
240
Guide Pipe Length
Discharge Flange
(JIS 10kgf/cm²)
DF
L-H3
L
DE
P2 P1 DG
DT
DA
BW
L.W.L.
No.DN - ØDD
Holes - Off Center
L1
F
H2
80
H1
DA DE DF DG DT DN DD
L6
QDC
Pump Model A P1 P2 F H1 H2 H3 L1 L6 BN1 BN2 BM BP BY1 BW DM I Model Weight
250 DL 57.5 834 195 435 700 350 440 510 400 58 70 70 650 215 500 560 1200 900 LL250 150 kg
250 DL 511 858 195 435 700 350 440 510 400 46 70 70 650 215 500 560 1200 900 LL250 150 kg
250 DL 515 872 195 435 700 350 440 510 400 34 70 70 650 215 500 560 1200 900 LL250 150 kg
250 DL 518 872 195 435 700 350 440 510 400 34 70 70 650 215 500 560 1200 900 LL250 150 kg
250 DL 522 872 195 435 700 350 440 510 400 34 70 70 650 215 500 560 1200 900 LL250 150 kg
300 DL 511 917 195 465 800 430 550 620 450 109 70 70 680 215 580 640 1200 900 LL300 200 kg
300 DL 515 917 195 465 800 430 550 620 450 109 70 70 680 215 580 640 1200 900 LL300 200 kg
300 DL 518 952 195 465 800 430 550 620 450 112 70 70 680 215 580 640 1200 900 LL300 200 kg
300 DL 522 952 195 465 800 430 550 620 450 112 70 70 680 215 580 640 1200 900 LL300 200 kg
Units: mm unless otherwise specified
001 Pump Casing FC200 Cast iron 1 814 Motor Frame FC150 Cast Iron 1
012 Suction Cover FC200 1 816 Power Side FC150 Cast Iron
Cast Iron Bracket 1
016 Mechanical FC200 Cast iron 1
Seal Cover 830 Shaft SUS403 Stainless Steel 1
021 Impeller FC200 Cast iron 1 842 Motor Cover FC150 Cast Iron 1
080 Bushing SS Steel 1 849-1 Ball Bearing 1
111 Mechanical 1 849-2 Ball Bearing 1
Seal
871 Intermediate FC150 Cast Iron 1
174 Discharge Bend FC200 Cast iron 1 Bracket
193 C3604 or Brass or 1 1
Oil Plug SUS304 Stainless Steel 876 Protector
211 Airvent Valve C3604 Brass 1 902 Control Device 1
275 Impeller Bolt SUS304 Stainless Steel 1 904 Lifting Hanger SS Steel 1
801 Rotor 1 909-1 Float Switch 1
802 Stator 1 909-2 Float Switch 1
Submersible 1
811 Cable 910 Float Pole Plastics 1
001 Pump Casing FC200 Cast iron 1 814 Motor Frame FC150 Cast Iron 1
012 Suction Cover FC200 1 816 Power Side FC150 Cast Iron
Cast Iron Bracket 1
016 Mechanical FC200 Cast iron 1
Seal Cover 830 Shaft SUS403 Stainless Steel 1
021 Impeller FC200 Cast iron 1 842 Motor Cover FC150 Cast Iron 1
080 Bushing SS Steel 1 849-1 Ball Bearing 1
111 Mechanical 1 849-2 Ball Bearing 1
Seal
871 Intermediate FC150 Cast Iron 1
174 Discharge Bend FC200 Cast iron 1 Bracket
193 C3604 or Brass or 1 1
Oil Plug SUS304 Stainless Steel 876 Protector
211 Airvent Valve C3604 Brass 1 902 Control Device 1
275 Impeller Bolt SUS304 Stainless Steel 1 904 Lifting Hanger SS Steel 1
801 Rotor 1 909-1 Float Switch 1
802 Stator 1 909-2 Float Switch 1
Submersible 1
811 Cable 909-3 Float Switch 1
910 Float Pole Plastics 1