r i s o ur l if e

Wate
Close-Coupled Pump in SS - DZA
Close-coupled type pumps according to EN 733 and DIN 24255, for medium
duty industrial applications. Light weight pump casing in stamped
stainless steel.

Technical Data
Flow Rate : up to 130 m3/h
Total Head : up to 57 m
Discharge : 32 - 65 mm
Water Temperature : max. 80 oC
(special design up to 110 oC)
Max. Operating Pressure : up to 10 bar
Speed : 1450, 2900 rpm Advantages
Please contact us if you have a requirement outside this range,
 Energy saving, close-coupled end-
as this range is under development. suction type centrifugal pump
 Stub-shaft connection to the motor. No
Application alignment required.
A wide range of applications for transporting
clean fluids in domestic and light industrial  According to DIN 24255 and EN 733
applications. standards ensures compatibility

DZA pumps are widely found in water supply  Standard IEC-motor

and water pressure boosting systems, water  Simplified maintenance
boiler feeding, pure water treatment systems,
washing and sprinkler, food refining, etc.  Available in SUS 304 and SUS 316L,
enables use with all chemically light-
aggressive fluids
DZA CLOSE-COUPLED STAINLESS STEEL END-SUCTION CENTRIFUGAL PUMP

Sectional View and Material Components

Part No. Description Material Material Code

AISI / ASTM
1 Motor Manufacturer’s standard
2 Motor Bracket Cast Iron ASTM 25B
3 Guard Plate Stainless Steel AISI 304
4 Stub Shaft Stainless Steel AISI 420 / AISI 304
 5 Rubber Parts Rubber EPDM
 6 Lining of Pump Head Stainless Steel AISI 304
 7 Mechanical Seal Carbon / SiC
 8 Impeller Stainless Steel AISI 304
9 Casing Stainless Steel AISI 304
 10 Wear Ring PTEF PTEF
 11 Impeller Nut Stainless Steel AISI 304
 12 Impeller Key Stainless Steel AISI 304
13 Base Plate Carbon Steel ASTM A570

 Recommended Spare Parts

316L Stainless Steel pump parts on request
CLOSE-COUPLED STAINLESS STEEL END-SUCTION CENTRIFUGAL PUMP DZA

Design Pump Identification

Hydraulic Parts DZA 65 x 40 - 125 / 0.75 - 4
All Stainless Steel, horizontal single-stage,
not self-priming centrifugal pump. Suitable
Pump Series*
for various media, including water or industrial
Suction (in mm)
Fluids.
Discharge (in mm)
Standard material: stainless steel AISI 304,
Impeller Diameter (in mm)
optionally available in AISI 316L
Motor Rating (in kW)
Performance and dimensions are in com-
Motor Poles
Pliance with EN 733 and DIN 24255.
(2 poles not shown)
The assembly dimensions of the mechanical
seal are in compliance with DIN 24960 /
ISO 3069.

Electric Motor
The motor is a standard TEFC-type, squirrel cage meeting IEC-standards.
Enclosure: IP 55
Insulation Class: F
Speed: 1450 or 2900 rpm (1750 or 3500 rpm on request)
Standard Voltage: 220 – 240 V, 1~, 50 Hz
380 – 415 V, 3~, 50 Hz

Pre-Selection Chart
CLOSE-COUPLED STAINLESS STEEL END-SUCTION CENTRIFUGAL PUMP DZA

Operating Table DZA

Power (l/min) 0 100 150 200 300 333

Model FlowQ
(kW) (m3/h) 0 6 9 12 18 20
DZA 50x32-125 /1.1 1.1 24 21 21 19.5 17 15
DZA 50x32-160 /1.5 1.5 29.5 26 25 24 20 18
DZA 50x32-160 /2.2 2.2 Head (m) 37 34 33 32 29 27
DZA 50x32-200 /3.0 3.0 45 41 40 38 34 32
DZA 50x32-200 /4.0 4.0 55 50 49 49 46 45

Power (l/min) 0 200 300 333 360 400 450 500 600 700
Model FlowQ
(kW) (m3/h) 0 12 18 20 22 24 27 30 36 42
DZA 65x40-125 /1.5 1.5 20 18.5 17 17 16.5 15 14 12 10 7
DZA 65x40-125 /2.2 2.2 26 23.5 22.5 22 21.5 21 20.5 19.5 16.5 13
DZA 65x40-160 /3.0 3.0 31 29 27.5 27 26.5 25 25 24 22 19
Head (m)
DZA 65x40-160 /4.0 4.0 39 36 34.5 34 33.5 32.5 32 31 29 26
DZA 65x40-200 /5.5 5.5 47 43 42 41.5 41 41 40 39 37 33
DZA 65x40-200 /7.5 7.5 57 53 52.5 52 51 50 49 48 46.5 44.5

Power (l/min) 0 400 450 500 550 600 650 700 800 1000 1200
Model FlowQ
(kW) (m3/h) 0 24 27 30 33 36 39 42 48 60 72
DZA 65x50-125 /3.0 3.0 22.5 20 19.5 19 18.5 18.5 18 17.5 16 13 9
DZA 65x50-125 /4.0 4.0 25.5 23 22.5 22 21.5 21 21 20.5 20 17 13.5
DZA 65x50-160 /5.5 5.5 33 29.5 29 28.5 28 28 27.5 27 26 24 20
Head (m)
DZA 65x50-160 /7.5 7.5 39 36 35 34.5 34 34 33.5 33 32.5 29 24
DZA 65x50-200 /9.2 9.2 53 47 46.5 46 45.5 45 43.5 39 32
DZ A65x50-200 /11 11 58 52 51.5 51 51 50.5 50 47 41

Performance Test according to ISO 2548 Class C

CLOSE-COUPLED STAINLESS STEEL END-SUCTION CENTRIFUGAL PUMP DZA

Operating Table DZA

Power (l/min) 600 650 700 800 1000 1200 1500 1800 1900 2000 2100 2200
Model FlowQ
(kW) (m3/h) 36 39 42 48 60 72 90 108 114 120 126 132
DZA 80x65-125 /4.0 4.0 17.5 17.3 17 16 14 11.5 8 4.5
DZA 80x65-125 /5.5 5.5 22 21.8 21.5 20.5 18.5 16 12.5 8.5 7
DZA 80x65-125 /7.5 7.5 27.5 27 26.5 26 24 21.5 18 14 12 10.5
DZA 80x65-160 /9.2 9.2 31 30 28 26 23 18 16 14.5 13
Head (m)
DZA 80x65-160 /11 11 36 35 33 31 28 23 21 19.5 18 16.5
DZ A80x65-200 /15 15 44 43 41 39 36 32 30 28 26 23
DZ A80x65-200 /18.5 18,5 51 50 49 48 45 41 39 37 35 33
DZ A80x65-200 /22 22 57 56 55 54 51 47 45.5 44 42 40

Power (l/min) 50 100 150 200 250 300 350 400 500 600
Model FlowQ
(kW) (m3/h) 3 6 9 12 15 18 21 24 30 36
DZA 50x32-125 /0.37-4 0.37 5.2 4.8 4.2 2.8
DZA 50x32-160 /0.55-4 0.55 8.5 8 7.5 6.8
DZA 50x32-200 /0.75-4 0.75 12.4 12 11.9 11
DZA 65x40-125 /0.55-4 0.55 5.5 5.3 5.2 4.9 4 3.2
DZA 65x40-160 /0.75-4 0.75 Head (m) 9 8.6 8.3 7.9 7.6 7.3
DZA 65x40-200 /1.5-4 1.5 13.5 13 12.8 12.5 12.3 11.5
DZA 65x50-125 /0.75-4 0.75 6.5 6.2 6 5.8 5.3 4.8 3.5
DZA 65x50-160 /1.5-4 1.5 9.5 9 8.6 8.4 8 7.5 6.9
DZA 65x50-200 /2.2-4 2.2 14 13.8 13.5 13.3 12.8 11.8 10

Performance Test according to ISO 2548 Class C.

2 pole data standardised to 2900 rpm, 4-pole standardised to 1450 rpm
CLOSE-COUPLED STAINLESS STEEL END-SUCTION CENTRIFUGAL PUMP DZA

Model Overview DZA

Model Power BEP (Best Efficiency Point) Speed NPSH

3
(kW) (HP) Flow (m /h) Head (m) Eff (%) (rpm) (m)
DZA 50x32-125 /1.1 1.1 1.5 12.5 20 61
DZA 50x32-160 /1.5 1.5 2 10 25 56
DZA 50x32-160 /2.2 2.2 3 12.5 32 62 2900 2
DZA 50x32-200 /3.0 3.0 4 10 40 48
DZA 50x32-200 /4.0 4.0 5.5 12.5 50 55
DZA 65x40-125 /1.5 1.5 2 20 15 68
DZA 65x40-125 /2.2 2.2 3 25 20 74
DZA 65x40-160 /3 3 4 20 27 66
2900 2
DZA 65x40-160 /4 4 5.5 25 32 66
DZA 65x40-200 /5.5 5.5 7.5 20 42 57
DZA 65x40-200 /7.5 7.5 10 25 50 62
DZA 65x50-125 /3 3 4 40 18 70
DZA 65x50-125 /4 4 5.5 50 20 72
DZA 65x50-160 /5.5 5.5 7.5 40 28 70
2900 2.5
DZA 65x50-160 /7.5 7.5 10 50 32 71
DZA 65x50-200 /9.2 9.2 12.5 40 47 73
DZA 65x50-200 /11 11 15 50 50 72
DZA 80x65-125 /4 4 5.5 75 11 72
DZA 80x65-125 /5.5 5.5 7.5 75 15 74 3.5
DZA 80x65-125 /7.5 7.5 10 75 21 74
DZA 80x65-160 /9.2 9.2 12.5 100 21 74
2900 4
DZA 80x65-160 /11 11 15 100 26 74
DZA 80x65-200 /15 15 20 100 34 75
DZA 80x65-200 /18.5 18.5 25 100 43 75 4.5
DZA 80x65-200 /22 22 30 100 50 75

Model Power BEP (Best Efficiency Point) Speed NPSH

3
(kW) (HP) Flow (m /h) Head (m) Eff (%) (rpm) (m)
DZA 50x32-125 /0.37-4 0.37 0.5 6 4.8 61
DZA 50x32-160 /0.55-4 0.55 0.8 6 8 62
DZA 50x32-200 /0.75-4 0.75 1 6 12 55
2
DZA 65x40-125 /0.55-4 0.55 0.8 12.5 5.1 74
DZA 65x40-160 /0.75-4 0.75 1 12.5 8.1 66 1450
DZA 65x40-200 /1.5-4 1.5 2 12.5 12.7 62
DZA 65x50-125 /0.75-4 0.75 1 20 5.9 72
DZA 65x50-160 /1.5-4 1.5 2 20 8.5 71 2.5
DZA 65x50-200 /2.2-4 2.2 3 20 13.4 72