Conversor DC-DC 15v
Conversor DC-DC 15v
Conversor DC-DC 15v
MI-200
Military DC-DC Converters 50 to 100W
Features
Inputs: Current limit
28Vdc per MIL-STD-704D/E OVP and thermal shutdown
155Vdc per MIL-STD-1399A
270Vdc per MIL-STD-704D/E Power boosters for
Single output: 2 – 48Vdc higher power outputs
Up to 23W/in3 ZVS/ZCS power architecture
MIL-STD-810 environments Low noise FM control
Product Highlights Up to 90% efficiency Size: 4.6" x 2.4" x 0.5"
The MI-Series is designed for Remote sense (116,8 x 61,0 x 12,7mm)
military applications and is based
on Vicor’s 1st Generation family of
zero-current/zero-voltage switching, Converter/Booster Specifications
component level DC-DC converters. (At TBP = 25°C, nominal line and 75% load, unless otherwise specified)
Operating at frequencies in excess PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
of 1MHz, the MI-Series offers
Input Characteristics
state-of-the-art performance in Input voltage range See input voltage chart
terms of power density, efficiency, No load power dissipation 1.35 2.0 Watts
noise, ease of use, and reliability. Output Characteristics
Set point accuracy 0.5 1.0 % Vnom
All units are manufactured in ISO Load/line regulation 0.05 0.2 % Vnom LL to HL, 10% to FL
9001-registered facilities. Full 0.2 0.5 % Vnom LL to HL, NL to 10%
epoxy encapsulation in Vicor’s Output temperature drift 0.01 0.02 %/°C
Output noise - pp 1.0 1.5 % Vnom Whichever is greater
industry standard package
100 150 mV } 20MHz BW
enables the MI-Series to meet Output voltage trimming (1) 50 110 % Vnom
MIL-STD-810 environmental Remote sense compensation 0.5 Vdc
requirements for humidity, OVP set point (2) 115 125 135 % Vnom Latching
Current limit 105 125 % Inom Auto restart
fungus, salt, fog, explosive Short circuit current (3) 20 130 % Inom
atmosphere, acceleration,
Control Pin Characteristics
vibration, and shock. (See page 32.) Gate-in high threshold 6 Vdc
Gate-in low threshold 0.65 Vdc
Standard features such as wide Gate-in low current 6 mA
output trimming/programming, Power sharing accuracy 0.95 1.05
current limiting, remote sense, Isolation Characteristics
output inhibit, and latching Isolation (input to output) 3,000 Vrms
OVP and OTP combine to offer Isolation (output to baseplate) 500 Vrms
Isolation (input to baseplate) 1,500 Vrms
a high degree of protection,
Input/output capacitance 50 75 pF
versatility, and reliability for
Environmental (MIL-STD-810)
military power systems. Altitude - method 500.2 70,000 feet Procedure II
Humidity - method 507.2 86 / 240 % / hours Procedure 1, cycle 1
Acceleration - method 513.3 9 g's Procedure 2
Vibration - method 514.3 20 g's Procedure 1, category 6
Shock - method 516.3 40 g's Procedure 1
Reliability (MIL-HDBK-217F)
25°C Ground Benign: G.B. 2,478,477 hours
50°C Naval Sheltered: N.S. 584,920 hours
65°C Airborne Inhabited Cargo: A.I.C. 483,303 hours
Thermal Characteristics
Efficiency 80-90 %
Baseplate to sink 0.07 °C/W With thermal pads
Thermal shutdown 90 95 105 °C Latching
Baseplate operating temperature +85 °C See product grade
Storage temperature +100 °C See product grade
Mechanical Specifications
Weight 6.0 (170) ounces (grams)
(1) 10V, 12V, and 15V outputs, standard trim range ±10%. Consult factory for wider trim range.
(2) No over temperature or voltage protection in booster modules.
(3) Output voltages of 5V or less incorporate foldback current limiting; outputs of 10V and above provide
Mechanical Drawing
2.40
(61,0)
4.20 0.30
0.22 (7,6)Min 1.75
(106,7)
(5,6) MIN (44,5)
MI-200 10/02 2 of 2
This datasheet has been downloaded from:
www.DatasheetCatalog.com