SSL40 Series: Single Output
SSL40 Series: Single Output
SSL40 Series: Single Output
The SSL40 series is a 40 W universal input ac-dc external power supply in a 4.21 x 1.77 x
0.98 inch plastic enclosure. The SSL40 is a low cost series with six single output models in a
very small package providing a pre-approved external power solution for a host of
worldwide low power portable and desktop applications. The SSL40 provides 40 W of output
power with free air convection cooling. Standard features include universal input,
overvoltage, short circuit protection and EN55022 conducted emissions level B. The series,
with full international safety approval and the CE mark, provides pre-approved SELV outputs
without the need for further safety approval or mechanical integration into the application
system. The SSL40 series is designed for use in low power, portable and desktop data
networking, computer and industrial applications requiring low cost external power adapters
in a small package. 2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated SPECIFICATIONS
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
Notes Notes
1 Peak output current lasting less than 60 seconds with duty cycle less than 5 Output voltage protected by Zener diode.
5.0%. During peak loading, output voltage may exceed total regulation 6 Three orthogonal axes random vibration, 10 minute test for each axis.
limits. 7 IEC320/C8 type input connector.
2 20 MHz bandwidth, peak to peak, measured using a 12 inch twisted pair 8 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
terminated with a 47 µF electrolytic capacitor. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
3 Total regulation is defined as the static output regulation at 25 °C, including special request, please contact your local sales representative for details.
initial tolerance, line voltage within stated limits, load currents within stated 9 NOTICE: Some models do not support all options. Please contact your
limits, and output voltages adjusted to their factory settings. local Artesyn representative or use the on-line model number search tool at
4 To help maintain the power supply safety approvals, the IEC320/C7 input http://www.artesyn.com/powergroup/products.htm to find a suitable
connector cable must be rated minimum 3.0 A and approved by an alternative.
applicable safety agency for the intended country of use. National and
international variations on mains plugs, adapters and customer preference PIN CONNECTIONS 2.5 MM JACK PLUG
to lead length prevents Artesyn from supplying an IEC320/C7 (or
compatible) input connector cable. The IEC320/C7 input (or compatible) Inner VA SWITCHCRAFT Power
connector cable can be sourced locally, e.g. Newark, Qual Electronics,
Radio Shack, etc. or other non affiliated distributors. Outer Return Jack, P/N 712A or equiv.
4.21
(107.00) 0.47
2.09 0.98
(53.00) (12.00) (25.00)
0.55
(14.00)
0.83
(21.00)
36.00 ± 0.79
(914.00 ± 20)
1.77
(45.00)
20)
PHONE JACK
0.098
(2.500)
www.artesyn.com
File Name: ssl40.pdf Rev (02): 07 Nov 2005