It's A Mushroom Lamp

It’s a Mushroom Lamp
3D MODEL DESCRIPTION
The perfect lamp for fans of mushrooms and videogames. This not bio but very luminescent fungi needs
little assembly and it’s completely support free. It’s also not that big, so you won’t need mush-room to store
it. Get it? Nevermind, it’ll grow on you.
Electrical Installation Instructions
What you’ll need:
All “It’s a Mushroom Lamp” printed parts
LED Module
(https://www.amazon.com/dp/B07DNV3ZSN/ref=sxin_16_pa_sp_search_thematic_sspa?__mk_pt_BR=Å
MÅŽÕÑ&content-id=amzn1.sym.1c86ab1a-a73c-4131-85f1-15bd92ae152d%3Aamzn1.sym.1c86ab1a-a7
3c-4131-85f1-15bd92ae152d&crid=2S2503F5XTYNP&cv_ct_cx=led%2Bmodule&keywords=led%2Bmodu
le&pd_rd_i=B07DNV3ZSN&pd_rd_r=67ee97f0-93d4-422a-a3e9-609c8dfae6d3&pd_rd_w=fT5vb&pd_rd_w
g=JBhfP&pf_rd_p=1c86ab1a-a73c-4131-85f1-15bd92ae152d&pf_rd_r=JMA2F3AN1P7NJKQ05NTS&qid=
1690546151&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=led%2Bmodule%2B%2Caps
%2C228&sr=1-4-364cf978-ce2a-480a-9bb0-bdb96faa0f61-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFy
Y2hfdGhlbWF0aWM&th=1 )
© 2023 STLFLIX Help Center

Electrical Plug (2.1mm DC Jack 12V)
(https://www.amazon.com/ThreeBulls-Pieces-5-5mmx2-1mm-Female-Connector/dp/B01N8VV78D/ref=sr_
1_4?crid=2QAZLBJ20272W&keywords=dc+jack+12v&qid=1690546041&sprefix=dc+jack+12%2Caps%2C
221&sr=8-4 )
On-off Switch (15mm x 10mm 12V)
(https://www.amazon.com/Endlessparts-Pieces-Black-Rocker-switch/dp/B09885NWGC/ref=sr_1_3?crid=2
6CUL3Y5FPNQE&keywords=switch+12v+15mm&qid=1690546495&sprefix=switch+12v+15mm%2Caps%
2C200&sr=8-3)
Power Supply (12V 1A)
(https://www.amazon.com/dp/B074HQ722Z/ref=sr_1_2_sspa?__mk_pt_BR=ÅMÅŽÕÑ&crid=2PN4CF2K2
SAMB&keywords=power%2Bsupply%2B12v&qid=1690546251&sprefix=power%2Bsupply12v%2Caps%2
C197&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1 )

Solder
Soldering Iron
20cm wire (3x)
(https://www.amazon.com/TYUMEN-Electrical-Extension-Flexible-Lighting/dp/B07SG23DT1/ref=sr_1_14_
sspa?keywords=led+wire&qid=1690517964&sr=8-14-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&psc=1
)
Electrical Tape
Instructions:
● Take two 20cm wires (if you used our recommendations, that’d be one black and one red) and strip
10mm on each end.

● Use solder to attach one end of the black wire to one of the pins of the 12v Power Jack and one
end of the red wire to the other pin.

● Thread the wires through the round hole on the It’s a Mushroom Lamp_Stand in a way that the plug
faces the outside of the lamp.
● Thread only the red wire through the rectangle hole on the It’s a Mushroom Lamp_Stand from the
inside to the outside, then solder it to the On-Off Switch on the pin aligned to the "0" (off).

● Take another 20cm length black wire and solder one of its ends to the remaining pin of the On-Off
Switch.
● Thread the other end of the new black wire through the rectangle hole on the It’s a Mushroom
Lamp_Stand from the outside to the inside, pulling it to the top.

● Gently knot one of the black wires so you can identify which is linked to the On-Off Switch and
which is linked to the Power Jack.

● Place the It’s a Mushroom Lamp_Led_Cover on top of the mushroom body and thread both black
wires through one of the lateral holes.

● Cut a stripe of 4 led modules from the rest, and separate them by cutting the double sided tape that
links them together. Do not cut the wires between them.

● Remove the double sided tape protection from the last module of the stripe and attach it to the It’s
a Mushroom Lamp_Led_Cover.

● In order, go around the It’s a Mushroom Lamp_Led_Cover gluing the modules. Once you reach the
last one, make the wire connection between gluing it to the Led Cover.

● Take the wire you identified from the On-Off Switch and connect it to the positive wire from the led
module. Use the wire coming from the Power Jack to connect the negative wire from the led
module. Wrap the links in electrical tape to avoid short circuits. After all that, glue the module to the
It’s a Mushroom Lamp_Led_Cover.

● Place the already assembled mushroom hat on the circle on top of the It’s a Mushroom
Lamp_Led_Cover.

● Plug your power supply onto the outlet and connect it to the power jack. You can now turn your
mushroom light on!

● This STL file is recommended for FDM Printers!

● 3D Printing Time:
● Approximately Height : 21 cm
●
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
● Line Width/ Nozzle: 0.4 mm

● First Layer Line Width: 0.48 mm / 120%
● Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First
Layer) / 500 mm/s (All the other layers on Bambu Lab)
● Recommended Initial Layer Height: 0.16 mm
● Recommended Layer Height: 0.16 mm
● Recommended Perimeters/ Walls: 3.
● Recommended Infill (%): 10% (Gyroid)
● Needs Support: No.
● Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer,
you can adapt them according to your preferences.
Happy Printing!

It's A Mushroom Lamp

Uploaded by

Copyright:

Available Formats

It's A Mushroom Lamp

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

It's A Mushroom Lamp

Uploaded by

Copyright:

Available Formats

It’s a Mushroom Lamp

Electrical Installation Instructions

What you’ll need:

All “It’s a Mushroom Lamp” printed parts

© 2023 STLFLIX Help Center

Electrical Plug (2.1mm DC Jack 12V)

On-off Switch (15mm x 10mm 12V)

Power Supply (12V 1A)

© 2023 STLFLIX Help Center

20cm wire (3x)

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

© 2023 STLFLIX Help Center

● This STL file is recommended for FDM Printers!

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

● Line Width/ Nozzle: 0.4 mm

© 2023 STLFLIX Help Center

You might also like