VPI Series Technical Manual DN15-50
VPI Series Technical Manual DN15-50
APPLICATION
SPECIAL FEATURES Honeywell threaded pressure independent control valves are
• Compact one-unit PICV, including modulating control valve, used in heating and cooling systems such as Air Handling
dynamic flow limiter and differential pressure control valve Units, Fan Coil Units, and other central plant applications.
in one body. Honeywell VPI series provides modulating control with full
authority regardless of pressure fluctuations in the system.
• Available in DN female threaded (ISO) sizes varying from Honeywell VPI series combines an externally adjustable
DN15-50. automatic balancing valve, a differential pressure control valve
• Easy setting and Field adjustable – flow setting is stepless and a full authority modulating control valve in single unit.
and can easily be set to any design flow in the flow range.
Setting can be done before or after installation and flow may Honeywell VPI series makes it simple to achieve 100% control
be changed on demand without removing the valve from the of the water flow in the building, while creating high comfort
installation. and energy savings at the same time. An additional benefit is
that no balancing is required if further stages are added to the
• “Sealed” setting - actuator will cover the setting and protect system, or if the dimensioned capacity is changed. Energy
against tampering. saving due to optimal control, lower flow and pump pressure.
• Standard or failsafe actuator; always incl. feedback signal - Maximized ΔT due to faster response and increased system
an easy solution for designers, installers and end-users. stability.
Shut-Off Leakage: ANSI / FCI 70-2 206 / IEC 60534-4 - Class IV/ 0.01% leakage of full open valve capacity
Rangeability: 100:1
CONSTRUCTION
Table 2. Construction details of DN15-DN50 PICVs.
Materials
Components
DN15-DN32 DN40-DN50
Valve Housing: DZR Brass ASTM CuZn36Pb2As Ductile iron ASTM A395 Grade 60-40-18
31-00381-01 2
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
H2 H3 H4 H5
31-00381-01 4
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Honeywell offers the impressive MLP, MLE, and thermoelectrical actuators, which have been designed for use with the threaded
VPI PICV series. They enable a new dimension of benefits to HVAC control, offering designers, system integrators, and building
owners.
MLP71MAA Actuators
Technical Specifications
5 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Wiring Connections
MLP71MAA
0(2)-10V Modulating
31-00381-01 6
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
The valve functions are adjusted with the DIP switches under the connection cover.
7 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
MLP71MNA Actuators
Technical Specifications
Failsafe Function: No
Feedback: No
CE Conformity: EN 60730
Protection Rating: IP54 incl. upside-down, class III, indoor use only
31-00381-01 8
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Wiring Connections
MLP71MNA
0(2)-10V Modulating
9 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
MLP41MNA Actuators
Technical Specifications
Feedback: No
Wire Connection: Fixed, 3 wires x 0.30 mm2 halogen free, 1 meter cable
Protection Rating: IP54, class II
31-00381-01 10
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Wiring Connections
11 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
MLP75MAB Actuators
Technical Specifications
Failsafe Function: No
Control Signal: Analog 0(2)-10V DC, <0.5mA or digital 3-point floating and ON/OFF
Feedback: Yes, control signal (analog) or 0-10V DC (digital ON/OFF)
Stroke: 7 mm / 0.276 in
CE Conformity: EN 60730
Protection Rating: IP54 incl. upside-down, class III, indoor use only
Override: Manual
31-00381-01 12
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Wiring Connections
13 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Actuator Function
Switch 6 Re-calibration
Setting is in different but flipping the switch will start re-calibration. After re- Off
calibration the actuator will automatically go into normal operation.
31-00381-01 14
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Technical Specifications
15 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Wiring Connections
31-00381-01 16
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Actuator Function
The valve functions are adjusted with the DIP switches under the connection cover.
17 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
MLE75MAB Actuators
Technical Specifications
Control Signal: Analog 0(2)-10V DC or digital 2-position with constant power supply
Feedback: Yes, control signal (analog) or 0-10V DC (digital)
Stroke: 7 mm / 0.276 in
Power Consumption: 24V AC: 7.9VA operating (9VA maximum) 24V DC: 3.7W operating (4.5W maximum)
Ambient Temperature: 0°C to +50°C / +32°F to +122°F
Protection Rating: IP54 incl. upside-down, class III, indoor use only
Override: Electrical
31-00381-01 18
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Wiring Connections
Actuator Function
The valve functions are adjusted with the DIP switches under the connection cover.
31-00381-01 20
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Note 3: To ensure that the valve is in an open position during commissioning of the system, the actuator will be delivered in open position and
remain in this position until it is electrically operated first time.
Note 4: Closing time is approximately the double dependent on ambient temperature.
21 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
MLP41TNA 48.4 (1.91) 38.0 (1.50) 44.1 (1.74) 61.0 (2.40) 69.3 (2.73) 0.11 (0.24)
Wiring Connections
31-00381-01 22
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
MLP71TNA Actuator
Technical Specifications
Note 5: To ensure that the valve is in an open position during commissioning of the system, the actuator will be delivered in open position and
remain in this position until it is electrically operated first time.
Note 6: Closing time is approximately the double dependent on ambient temperature.
23 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
MLP71TNA (FT.0.2) 63.5 (2.5) 38.0 (1.50) 44.1 (1.74) 63.5 (2.5) 71.8 (2.83) 0.12 (0.27)
Wiring Connections
31-00381-01 24
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
FLOW-RATE SETTINGS
Table 25. Flow rates for DN15-DN50.
Valve Maximum Flow Rate Close-Off Differential
Model No. diameter Pressure Pressure PN Rating End Connection
mm lph m3/h gpm kPa kPaD
VPI015TWL2 DN15 1110 1.11 4.89 800 800 PN25 Fixed female threaded ISO
VPI015TWL2 DN15 1110 1.11 4.89 800 800 PN25 Fixed female threaded ISO
VPI015TWH2 DN15 2650 2.7 11.7 800 800 PN25 Fixed female threaded ISO
VPI015TPH2 DN15 2650 2.7 11.7 800 800 PN25 Fixed female threaded ISO
VPI020TWL2 DN20 1110 1.11 4.89 800 800 PN25 Fixed female threaded ISO
VPI020TPL2 DN20 1110 1.11 4.89 800 800 PN25 Fixed female threaded ISO
VPI020TWH2 DN20 2650 2.7 11.7 800 800 PN25 Fixed female threaded ISO
VPI020TPH2 DN20 2650 2.7 11.7 800 800 PN25 Fixed female threaded ISO
VPI025TWH2 DN25 2650 2.7 11.7 800 800 PN25 Fixed female threaded ISO
VPI025TPH2 DN25 2650 2.7 11.7 800 800 PN25 Fixed female threaded ISO
VPI032TWH2 DN32 4630 4.6 20.4 800 800 PN25 Fixed female threaded ISO
VPI032TPH2 DN32 4630 4.6 20.4 800 800 PN25 Fixed female threaded ISO
VPI040TPH2 DN40 13647 13.6 60.1 800 600 PN25 Fixed female threaded ISO
VPI050TPL2 DN50 13647 13.6 60.1 800 600 PN25 Fixed female threaded ISO
31-00381-01 26
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
DN40-DN50
Setting
l/sec l/hr GPM
0.528 1900 8.36 1.0
0.633 2278 10.0 1.1
0.738 2655 11.7 1.2
0.843 3033 13.3 1.3
0.947 3410 15.0 1.4
1.05 3787 16.7 1.5
1.16 4163 18.3 1.6
1.26 4537 20.0 1.7
1.36 4909 21.6 1.8
1.47 5279 23.2 1.9
1.57 5646 24.8 2.0
1.67 6011 26.4 2.1
1.77 6372 28.0 2.2
1.87 6730 29.6 2.3
1.97 7083 31.2 2.4
2.06 7432 32.7 2.5
2.16 7776 34.2 2.6
2.25 8115 35.7 2.7
2.35 8449 37.2 2.8
2.44 8777 38.6 2.9
2.53 9098 40.0 3.0
2.61 9413 41.4 3.1
2.70 9721 42.8 3.2
2.78 10021 44.1 3.3
2.86 10314 45.4 3.4
2.94 10599 46.6 3.5
3.02 10875 47.8 3.6
3.10 11142 49.0 3.7
3.17 11400 50.2 3.8
3.24 11649 51.3 3.9
3.30 11888 52.3 4.0
3.37 12116 53.3 4.1
3.43 12334 54.3 4.2
3.48 12540 55.2 4.3
3.54 12735 56.0 4.4
3.59 12919 56.8 4.5
3.64 13090 57.6 4.6
3.68 13249 58.3 4.7
3.72 13395 58.9 4.8
3.76 13527 59.5 4.9
3.79 13647 60.0 5.0
27 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
T - Threaded DN Size
2 - PN25
VPI 015 T P H 2
Example: VPI015TPH2
- without Pressure Test Port models are available only for DN15-DN32
- Low Flow (LF) models are available only for DN15 and DN20.
ML - Motor Linear
E - Electronic Fail-Safe
41 - On/Off 230Vac
71 - Modulating (0)2-10Vdc
T - Thermo-Electric Actuator
M - Electric Actuator
A - Analog feedback
N - No feedback
A - DN15-DN32 (Threaded)
B - DN40-DN50 (Threaded)
ML P 71 M N A
Example: MLP71MNA
31-00381-01 28
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Note 7: DN32 valves when used with MLP41TNA or MLP71TNA might exceed specified leakage rate.
Note 8: Thermal Actuators closing time is approximately double dependent on ambient temperature.
29 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
Accessories
Table 28. List of available accessories.
Part Code Part Name
VPI-PP-TP VPI Series Pressure Ports - Test Plugs
31-00381-01 30
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
31 31-00381-01
VPI SERIES PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS
ORDERING INFORMATION
UNITED ARAB EMIRATES INDIA PACIFIC
Honeywell Building Technologies Honeywell HBT India Buildings Honeywell
Building Management Systems Unitech Trade Center, 5th Floor, Sector-43, 2 Richardson Pl, North Ryde NSW 2113,
Emaar Business Park, Sheikh Zayed Road, Block C, Sushant Lok Phase - I, Australia.
Building No. 2, 2nd floor, 201 Gurgaon - 122 002, India. Call: 1300 363 936
Post Office Box 232362, Call: 1-800-103-0339 Email: pacificustomercare@honeywell.com
Dubai, United Arab Emirates. Email: HBTIndiabuildings@honeywell.com
Call: +971 44541704
By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or
modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against
any liability, cost, or damages, including attorneys’ fees, arising out of, or resulting from, any modification to the literature
by you.
31-00381-01
August 2020
© 2020 Honeywell International Inc.