Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Experiment No - Measurement of Resistance

    Uploaded by

    Appu Paroor
    The document describes an experiment to measure the armature resistance, series field resistance, and shunt field resistance of a DC compound generator using the voltmeter-ammeter method. Connections are made according to diagrams and readings are taken from voltmeters and ammeters with varying loads. Resistance values are calculated using Ohm's Law and the mean values are determined for the armature, series field, and shunt field resistances. The results of these resistance measurements are reported.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Experiment No - Measurement of Resistance

    Uploaded by

    Appu Paroor
    34 views5 pages
    The document describes an experiment to measure the armature resistance, series field resistance, and shunt field resistance of a DC compound generator using the voltmeter-ammeter method. Connections are made according to diagrams and readings are taken from voltmeters and ammeters with varying loads. Resistance values are calculated using Ohm's Law and the mean values are determined for the armature, series field, and shunt field resistances. The results of these resistance measurements are reported.

    Original Description:

    Measurement of resistance

    Original Title

    Experiment No--measurement of resistance

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes an experiment to measure the armature resistance, series field resistance, and shunt field resistance of a DC compound generator using the voltmeter-ammeter method. Connections are made according to diagrams and readings are taken from voltmeters and ammeters with varying loads. Resistance values are calculated using Ohm's Law and the mean values are determined for the armature, series field, and shunt field resistances. The results of these resistance measurements are reported.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views5 pages

    Experiment No - Measurement of Resistance

    Uploaded by

    Appu Paroor
    The document describes an experiment to measure the armature resistance, series field resistance, and shunt field resistance of a DC compound generator using the voltmeter-ammeter method. Connections are made according to diagrams and readings are taken from voltmeters and ammeters with varying loads. Resistance values are calculated using Ohm's Law and the mean values are determined for the armature, series field, and shunt field resistances. The results of these resistance measurements are reported.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Experiment No :

    Date :

    MEASUREMENT OF RESISTANCE

    AIM:- To determine the value of Armature resistance, Series field resistance and
    Shunt field resistance of the given DC compound generator by Voltmeter-Ammeter
    method.

    MACHINE DETAILS:

    DC COMPOUND GENERATOR

    Rated Voltage :

    Rated Current :

    Rated Power :

    Rated Speed :

    APPARATUS REQUIRED:

    SL:NO Item with specification Quantity Remarks


    1 Moving coil type Ammeter 0 – 10A 1
    2 Moving coil type Ammeter 0 – 2.5A 1
    3 Moving coil type Voltmeter 0 – 50V 1
    4 Moving coil type Voltmeter 0 – 300V 1
    5 Rheostat 230 Ω ,2 A 1
    6 Rheostat 6 Ω ,20 A 1
    7 DC Low volt supply unit (Rectifier) ( 0 – 50 v) 1
    8 230 volt DC supply unit 1
    9 Connecting wires ….

    THEORY: Ohm’s law states that ,the temperature remains constant, when the
    current flowing through a conductor is direcly proportional to the potential
    difference between the two ends and inversely proportional to the resistance of the
    conductor.

    Ie., V =IR, Where R is a constant called resistance of the circuit.

    I = V/R , R = V/I.
    Sl;No. V I Ra = V/I

    Sample calculation of Sl no:3

    Volt meter reading V =

    Ammeter reading I =

    Resistance Ra = V/I =

    Mean Ra =
    Sl;No. V I Ra = V/I

    Sample calculation of Sl no:3

    Volt meter reading V =

    Ammeter reading I =

    Resistance Rse = V/I =

    Mean Rse =
    Sl;No. V I Ra = V/I

    Sample calculation of Sl no:3

    Volt meter reading V =

    Ammeter reading I =

    Resistance Ra = V/I =

    Mean Rsh =
    PROCEDURE:

    (a) For the Measurement of Armature Resistance:

    Connections are made as per the connection diagram (1).A low volt DC
    supply is applied ,by varying the rheostat different readings are taken, from
    the volt meter and Ammeter and are tabulated.Repeat more set of readings
    by adjusting the rheostat.From this Armature resistance can be calculated
    by using the equation.

    R = V/I , Mean value of Ra is calculated.

    (b) For the Measurement of Series field Resistance:

    Connections are made as per the connection diagram (2).A low volt DC
    supply is applied ,by varying the rheostat different readings are taken, from
    the volt meter and Ammeter and are tabulated. Repeat more set of readings
    by adjusting the rheostat. From this Series field resistance can be calculated
    by using the equation.

    R = V/I , Mean value of Rse is calculated.

    (c ) For the Measurement of Shunt field Resistance:

    Connections are made as per the connection diagram (3).A 230 volt DC
    supply is applied ,by varying the rheostat different readings are taken, from
    the volt meter and Ammeter and are tabulated. Repeat more set of readings
    by adjusting the rheostat. From this Shunt field resistance can be calculated
    by using the equation.

    R = V/I , Mean value of Rsh is calculated.

    RESULT:

    Armature resistance of the DC machine =

    Series field resistance of the DC machine =

    Shunt field resistance of the DC machine =

    You might also like