74 C 85

MM74C85 4-Bit Magnitude Comparator
October 1987 Revised May 2002

General Description
The MM74C85 is a four-bit magnitude comparator which will perform comparison of straight binary or BCD codes. The circuit consists of eight comparing inputs (A0, A1, A2, A3, B0, B1, B2, B3), three cascading inputs (A > B, A < B and A = B), and three outputs (A > B, A < B and A = B). This device compares two four-bit words (A and B) and determines whether they are greater than, less than, or equal to each other by a high level on the appropriate output. For words greater than four-bits, units can be cascaded by connecting the outputs (A > B, A < B, and A = B) of the least significant stage to the cascade inputs (A > B, A < B and A = B) of the next-significant stage. In addition the least significant stage must have a high level voltage (VIN(1)) applied to the A = B input and low level voltage (VIN(0)) applied to A > B and A < B inputs.
Features
s Wide supply voltage range: 3.0V to 15V s Guaranteed noise margin: 1.0V s High noise immunity: 0.4 VCC (typ.) s Low power: TTL compatibility: fan out of 2 driving 74L s Expandable to 'N' stages s Applicable to binary or BCD s Low power pinout: 74L85
Ordering Code:
Order Number MM74C85N Package Number N16E Package Description 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Connection Diagram
Top View
2002 Fairchild Semiconductor Corporation
DS005886
www.fairchildsemi.com
MM74C85
Truth Table
Comparing Inputs A3, B3 A3 > B3 A3 < B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A3 = B3 A2, B2 X X A2 > B2 A2 < B2 A2 = B2 A2 = B2 A2 = B2 A2 = B2 A2 = B2 A2 = B2 A2 = B2 A2 = B2 A2 = B2 A2 = B2 A2 = B2 A2 = B2 A1, B1 X X X X A1 > B1 A1 < B1 A1 = B1 A1 = B1 A1 = B1 A1 = B1 A1 = B1 A1 = B1 A1 = B1 A1 = B1 A1 = B1 A1 = B1 A0, B0 X X X X X X A0 > B0 A0 < B0 A0 = B0 A0 = B0 A0 = B0 A0 = B0 A0 = B0 A0 = B0 A0 = B0 A0 = B0 X X X X X X X X H L L L H H H L Cascading Inputs A>B A<B X X X X X X X X L H L H L H H L A=B X X X X X X X X L L H H H H L L A>B H L H L H L H L H L L L H H H L Outputs A<B L H L H L H L H L H L H L H H L A=B L L L L L L L L L L H H H H L L
H = HIGH Level, L = LOW Level, X = Irrelevant
Logic Diagram
MM74C85
Absolute Maximum Ratings(Note 1)

Voltage at Any Pin Operating Temperature Range Storage Temperature Range Power Dissipation (PD) Dual-In-Line Small Outline Operating VCC Range 700 mW 500 mW 3.0V to 15V
VCC Lead Temperature (Soldering, 10 seconds)
18V 260C
0.3V to VCC + 0.3V 55C to +125C 65C to +150C
Note 1: Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. Except for Operating Temperature Range they are not meant to imply that the devices should be operated at these limits. The table of Electrical Characteristics provides conditions for actual device operation.
DC Electrical Characteristics
Min/Max limits apply across temperature range unless otherwise noted Symbol Parameter Conditions CMOS TO CMOS VIN(1) VIN(0) VOUT(1) VOUT(0) IIN(1) IIN(0) ICC VIN(1) VIN(0) VOUT(1) VOUT(0) ISOURCE ISOURCE ISINK ISINK Logical 1 Input Voltage Logical 0 Input Voltage Logical 1 Output Voltage Logical 0 Output Voltage Logical 1 Input Current Logical 0 Input Current Supply Current Logical 1 Input Voltage Logical 0 Input Voltage Logical 1 Output Voltage Logical 0 Output Voltage Output Source Current (P-Channel) Output Source Current (P-Channel) Output Sink Current (N-Channel) Output Sink Current (N-Channel) VCC = 5.0V VCC = 10V VCC = 5.0V VCC = 10V VCC = 5.0V, IO = 10 A VCC = 10V, IO = 10 A VCC = 5.0V, IO = +10 A VCC = 10V, IO = +10 A VCC = 15V, VIN = 15V VCC = 15V, VIN = 0V VCC = 15V VCC = 4.75V VCC = 4.75V VCC = 4.75V, IO = 360 A VCC = 4.75V, IO = 360 A VCC = 5.0V, VOUT = 0V TA = 25C VCC = 10V, VOUT = 0V TA = 25C VCC = 5.0V, VOUT = VCC TA = 25C VCC = 10V, VOUT = VCC TA = 25C 2.4 0.4 VCC 1.5 0.8 1.0 0.005 0.005 0.05 300 4.5 9.0 0.5 1.0 1.0 3.5 8.0 1.5 2.0 V V V V A A A V V V V Min Typ Max Units
CMOS/LPTTL INTERFACE
OUTPUT DRIVE (See Family Characteristics Data Sheet) (Short Circuit Current) 1.75 8.0 1.75 8.0 3.3 15 3.6 16 mA mA mA mA
AC Electrical Characteristics
TA = 25C, CL = 50 pF, unless otherwise specified Symbol Parameter tpd tpd CIN CPD Propagation Delay from any A or B Data Input to any Data Output Propagation Delay Time from any Cascade Input to any Output Input Capacitance Power Dissipation Capacitance
(Note 2)
Conditions Min Typ 250 100 200 100 5.0 45 Max 600 300 500 250 Units ns ns pF pF
VCC = 50V VCC = 10V VCC = 50V VCC = 10V Any Input Per Package (Note 4)
Note 2: AC Parameters are guaranteed by DC correlated testing. Note 3: Capacitance is guaranteed by periodic testing. Note 4: CPD determines the no load AC power consumption of any CMOS device. For complete explanation see Family Characteristics application note, AN-90.
MM74C85
Typical Applications
Four Digit Comparator
Switching Time Waveforms
Unused inputs must be tied to an appropriate logic level.
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N16E
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 5 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.

74 C 85

Uploaded by

Copyright:

Available Formats

74 C 85

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

74 C 85

Uploaded by

Copyright:

Available Formats

MM74C85 4-Bit Magnitude Comparator

October 1987 Revised May 2002

MM74C85 4-Bit Magnitude Comparator

2002 Fairchild Semiconductor Corporation

H = HIGH Level, L = LOW Level, X = Irrelevant

Absolute Maximum Ratings(Note 1)

VCC Lead Temperature (Soldering, 10 seconds)

0.3V to VCC + 0.3V 55C to +125C 65C to +150C

Switching Time Waveforms

Unused inputs must be tied to an appropriate logic level.

MM74C85 4-Bit Magnitude Comparator

Physical Dimensions inches (millimeters) unless otherwise noted

You might also like