8 Ee

Scheme & Syllabus of
III & IV Semesters (2021 Scheme)

(AS PER NEP-2020 GUIDELINES)
BACHELOR OF ENGINEERING (B.E)

IN
ELECTRICAL AND ELECTRONICS ENGINEERING
(ACADEMIC YEAR 2022-2023)

i
Department Vision
Attain technical excellence in Electrical and Electronics Engineering through
graduate programs and interdisciplinary research related to sustainability in
power, energy and allied fields.
Department Mission
1. To provide technical education that combines rigorous academic study and the
excitement of innovation enabling the students to engage in lifelong learning.
2. To establish Center of Excellence in sustainable electrical energy, smart grids
and systems.
3. To establish tie-ups with industries and institutions of repute and to foster
building up of a wide knowledge base to keep in tune with upcoming
technologies.
4. To motivate commitment of faculty and students to collate, generate,
disseminate, preserve knowledge and to work for the benefit of society.
5. To develop simple, appropriate and cost effective inclusive technologies which
are instrumental in the up-liftment of rural society.
PROGRAM EDUCATIONAL OBJECTIVES (PEOs)

PEO1. To provide a strong foundation in Mathematics, Science and Engineering
fundamentals as well as comprehend, analyze, design, innovate and develop
products for real life applications.
PEO2. To inculcate ethical attitude, effective communication skills, leadership qualities
and team spirit for a successful professional career with concern for society.
PEO3.To provide a holistic academic environment to foster excellence,
entrepreneurship and multidisciplinary approach to inculcate an aptitude for
research and lifelong learning.
PROGRAM SPECIFIC OUTCOMES (PEOs)

PSO Description
PSO1 The B.E EEE Program must demonstrate knowledge and competence in the
application of circuit analysis, control systems, field theory, analog and digital
electronics, Power Electronics, microcontrollers , microprocessors, Signal
processing and conditioning, computer hardware and software to the design,
building , testing, protection and operation of electrical machines, power
systems, electrical and electronic systems.
PS02 The B.E. EEE Program must demonstrate knowledge and competence in the
application of basic sciences, rigorous mathematics and project management
techniques in the design of complex electrical and electronic systems.
PSO3 The B.E. EEE Program must demonstrate the ability to effectively work in a
team, communicate correctly and develop an ethical attitude and concern for
society and environment.
ii
ABBREVIATIONS
Sl. No. Abbreviation Meaning

1. VTU Visvesvaraya Technological University
2. BS Basic Sciences
3. CIE Continuous Internal Evaluation
4. SEE Semester End Examination
5. PE Professional Core Elective
6. GE Global Elective
7. HSS Humanities and Social Sciences
8. PY Physics
9. CY Chemistry
10. MA Mathematics
11. AS Aerospace Engineering
12. AI & ML Artificial Intelligence & Machine Learning
13. BT Biotechnology
14. CH Chemical Engineering
15. CS Computer Science & Engineering
16. CV Civil Engineering
17. EC Electronics & Communication Engineering
18. EE Electrical & Electronics Engineering
19. EI Electronics & Instrumentation Engineering
20. ET Electronics & Telecommunication Engineering
21. IM Industrial Engineering & Management
22. IS Information Science & Engineering
23. ME Mechanical Engineering
INDEX
SECOND YEAR COURSES
Sl. No. Course Code Name of the Course Page No.
1. 21MA31A* Engineering Maths- III 1
2. 21BT32A** Environmental Technology 3
3. 21EE33 Linear Integrated Circuits (Common to EE, EI, ET) 6
4. 21EC34 Analysis and Design of Digital Circuits (Common to EC, EE, EI, ET) 9
5. 21EE35 Network Analysis 12
6. 21EE36 Measurement and Transducers 14
7. 21DCS37*** Bridge Course: Mathematics 16
21HS38A /
8. Kannada Course: Aadalitha Kannada (18HS38A) / Vyavaharika Kannada (18HS38V)
21HS38V
9. 21HS39 Ability Enhancement course - I 18
10. 21EE310 Summer Internship- I 34
11. 21MA41* Statistics and Probability for Data Science 36
12. 21EC42** Materials for Electronics Engineering 38
13. 21EI43 Microcontrollers & Programming (Common to EE, EI, ET) 40
14. 21EE44 Power Electronics 43
15. 21ET45 Principles of Electromagnetics (Common to EE, EI and ET) 46
16. 21EE4AX Professional Elective – Group A (MOOC Courses) 48
17. 21EE47 Design Thinking Lab 53
18. 21DMA48*** Bridge Course: C Programming 55
19. 21HSS49 Universal Human Values and Professional Ethics 57
iii
Bachelor of Engineering in
III SEMESTER
CIE Max Marks SEE Max Marks
Sl. Credit Allocation
Course Code Course Title BoS Category Duration CIE Duration SEE
No.
L T P Total (H) Theory Lab (H) Theory Lab
Linear algebra, Integral transforms and
21MA31B* 3 1 MA
1 Fourier series 0 4 Theory 1.5 100 **** 3 100 ****
2 21BT32A Environmental Technology 2 0 0 2 BT Theory 1 50 **** 2 50 ****
Linear Integrated Circuits (common
21EE33
with EE / ET/ EI)
3 3 0 1 4 EE Theory+Lab 1.5 100 50 3 100 50
Analysis and Design of Digital Circuits

21EC34
(Common with EC/EE/ EI/TE)
4 3 0 1 4 EC Theory+Lab 1.5 100 50 3 100 50
21EE35 Network Analysis 3 1 0
5 4 EE Theory 1.5 100 **** 3 100 ****
6 21EE36 Measurement and Transducers 2 0 0 2 EE Theory 1 50 **** 2 50 ****

21DMA37*** Bridge Course: Mathematics
2(A) 0 0 AUDIT MA
7 Theory 1.5 50 **** **** **** ****
Kannada Course:
AADALITHA KANNADA (21HS38A) /
21HS38A / VYAVAHARIKA KANNADA (21HS38V) 1 0 0 1 HSS
21HS38V
8 Theory 1 50 **** 2 50 ****
Ability Enhancement course
21HSAE39A/
0 0 1 1 HSS
B/C/D/E ***
Lab 1 **** 50 2 **** 50
10 21EEI310 Summer Internship- I 0 0 1 1 EE Internship 1 **** 50 2 **** 50
23
iv
*ENGINEERING MATHEMATICS - III
Sl.No COURSE TITLE COURSE CODE BRANCHES
1 Linear algebra, Integral transforms and Number 21MA31A CS & IS
Theory
2 Linear algebra, Integral transforms and Fourier AS, EC,EE,EI & ET
21MA31B
series
3 Integral transforms and Advanced Numerical BT,CH,CV,IM & ME
21MA31C
Methods
4 Mathematical Fundamentals 21MA31D AI & ML
** MANDATORY COURSES
1 Environmental Technology 21BT32A All circuit Branches
2 Biology for Engineers 21BT32B BT & AS
3 Engineering Materials 21ME32 AS, CH & ME
*** Bridge Course: Audit course for lateral entry diploma students
1 Bridge Course Mathematics 21DMA37 AS,BT,CH,CV,EC,EE,EI,
IM,ME & TE
2 Bridge Course C Programming 21DCS37 CS,IS & AI & ML
ABILITY ENHANCEMENT COURSE

Sl. No. Course Code Course Title
1. 21HSAE39A National Service Scheme (NSS)
2. 21HSAE39B National Cadet Corps (NCC)
3. 21HSAE39C Physical Education
4. 21HSAE39D Music/Dance/Theatre
5. 21HSAE39E Art work/ Painting/ Photography & Film making
v
Bachelor of Engineering in
IV SEMESTER
CIE SEE Max Marks
Sl. Course Credit Allocation Max Marks CIE
Course Title BoS Category Duration Duration SEE
No. Code
L T P Total (H) Theory Lab (H) Theory Lab
21MA41 Statistics and Probability for Theory
2 1 0 3 MA 1.5 100 **** 3 100
1 Data Science ****
Materials for Electronics
Engineering
2 21EC42 2 0 0 2 EC Theory 1 50 **** 2 50
(Common with EC/EE/
EI/TE) ****
Microcontroller &
21EI43 Programming (Common 3 0 1 4 EI Theory+Lab 1.5 100 50 3 100
3 with EC/EE/ EI/TE) 50
21EE44 Power Electronics 2 1 1 4 EE Theory+Lab 1.5 100 50 3 100
4 50
Principles of Electromagnetic 3 1 0 4 ET Theory 1.5 100 **** 3 100 ****

5 21ET45 Fields (Common to EE/ET)
Professional Core Elective –
6 21EE4AX 2 0 0 2 EE MOOC 1.5 50 **** 2 50
Group A
****
7 21EE46 Design Thinking Lab 0 0 2 2 EE Lab 1 **** 50 2 **** 50
Bridge Course: C
21DCS47** 2 (A) 1 0 AUDIT CS Theory 1.5 50 **** **** ****
9 Programming ****
21HSU48 Universal Human Values 2 0 0 2 HSS Theory 1 50 **** 2 50 ****

10 and Professional Ethics
23
vi
*ENGINEERING MATHEMATICS - IV
1 Statistics and Probability for 21MA41 AS, AI & ML, CH, CV, CS,
Data Science EC, EE, ET, EI, IS, ME
2 Biostatistics 21MA41 BT
3 Statistics for Data Analytics 21MA41 IM
** MANDATORY COURSES
1 Engineering Materials 21EC42 EC,EE,EI,TE
2 Bio-Inspired Engineering 21BT42 AI&ML, CS, IS & BT
3 Civil Engineering Materials 21CV42 CV
4 Engineering Materials 21ME42 AS, CH, IM & ME
*** Bridge Course: Audit course for lateral entry diploma students
1 Bridge Course Mathematics 21DMA48 CS,IS & AI&ML
2 Bridge Course C Programming 21DCS48 AS,BT,CH,CV,EC,EE,EI,IM,
ME & TE
GROUP A: PROFESSIONAL ELECTIVES (MOOC COURSES)

Sl. No. Course Course Title Duration
Code
1. 21EE4A1 Analog Circuits 8 Weeks
2. 21EE4A2 Programming, Data Structures and Algorithms 8 Weeks
Using Python
3. 21EE4A3 Business Analytics & Text Mining Modeling 8 Weeks
Using Python
4. 21EE4A4 Introduction to Operating Systems 8 Weeks
5. 21EE4A5 Multi-Core Computer Architecture - Storage and 8 Weeks
Interconnects
vii
Semester: III
LINEAR ALGEBRA, INTEGRAL TRANSFORMS AND FOURIER SERIES
(Theory)
(Common to AS, EC, EE, EI, ET)
Course Code : 21MA31B CIE : 100 Marks
Credits: L:T:P : 3:1:0 SEE : 100 Marks
Total Hours : 45L+15T SEE Duration : 3.00 Hours
Unit - I 09 Hrs
Linear Algebra - I:
Vector spaces, subspaces, linear dependence and independence, basis and dimension, four
fundamental subspaces. Rank and nullity theorem (without proof). Linear transformations -
matrix representation, kernel and image of a linear transformation, dilation, reflection,
projection and rotation matrices.
Unit - II 09 Hrs
Linear Algebra - II:
Inner Products, orthogonal matrices, orthogonal and orthonormal bases, Gram-Schmidt
process, QR-factorization. Eigen values and Eigen vectors, diagonalization of a matrix
(symmetric matrices) and singular value decomposition.
Unit - III 09 Hrs
Laplace Transform:
Existence and uniqueness of Laplace transform (LT), transform of elementary functions, region
of convergence. Properties - linearity, scaling, s - domain shift, differentiation in the s - domain,
division by t, differentiation and integration in the time domain. LT of special functions -
Periodic functions (square wave, saw-tooth wave, triangular wave, full & half wave rectifier),
Heaviside unit step function, unit impulse function.
Unit - IV 09 Hrs
Inverse Laplace Transform:
Definition, properties, evaluation using different methods. Convolution theorem (without
proof) - problems. Application to solve ordinary linear differential equations.
Unit - V 09 Hrs
Fourier series and Fourier Transforms:
Periodic function, even and odd functions. Dirichlet’s conditions, Euler’s formulae for Fourier
series, problems on time periodic signals (square wave, half wave rectifier, saw-tooth wave
and triangular wave), Fourier sine series, Fourier cosine series.
Fourier integral theorem, complex Fourier and inverse Fourier transform, Fourier sine
transform, Fourier cosine transform, properties - linearity, scaling, time-shift and modulation -
problems.
Course Outcomes: After completing the course, the students will be able to
CO1: Illustrate the fundamental concepts of linear algebra, Laplace and inverse Laplace
transforms, Fourier series and Fourier transforms.
CO2: Apply the acquired knowledge of linear algebra, Laplace and inverse Laplace
transforms, Fourier series and Fourier transforms to solve the problems of engineering
applications.
1
CO3: Analyze the solution of the problems using appropriate techniques of linear algebra,
integral transforms and Fourier series to the real world problems arising in many
practical situations.
CO4: Interpret the overall knowledge of linear algebra, integral transforms and Fourier series
gained to engage in life-long learning.
Reference Books
Linear Algebra and its Applications, Gilbert Strang, 4th Edition, 2014, Cengage
1
Learning India Edition, ISBN: 9788131501726, 8131501728.
A Textbook of Engineering Mathematics, N.P. Bali & Manish Goyal, 7th Edition, 2010,
2
Lakshmi Publications, ISBN: 978-81-7008-992-6.
Higher Engineering Mathematics, B.S. Grewal, 44th Edition, 2015, Khanna Publishers,
3
ISBN: 978- 81-933284-9-1.
Linear Algebra and its Applications, David C. Lay, 4th Edition, 2012, Pearson
4
Education India, ISBN-13: 970321385178, ISBN-10: 0321385171.
ASSESSMENT AND EVALUATION PATTERN

CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
Quiz-I Each quiz is evaluated for 10
Quiz-II marks adding up to 20 MARKS
THEORY COURSE
(Bloom’s Taxonomy Levels: Remembering, Understanding, Applying, Analyzing,
Evaluating, and Creating)
Test – I Each test will be conducted for 50
Marks adding upto 100 marks.
Test – II Final test marks will be reduced
to 40 MARKS
EXPERIENTIAL LEARNING 40
MATLAB 20
Model presentation/ case study/ video
20
preparation
100
MAXIMUM MARKS FOR THE THEORY 100 MARKS
MARKS
2
Semester III
ENVIRONMENTAL TECHNOLOGY
Course Code : 21BT32A/21BT42A CIE : 50 Marks
Credits: L: T:P : 2:0:0:0 SEE : 50 Marks
Total Hours : 26 L SEE Duration : 90 min
Course Learning Objectives: The students will be able to
1 Explain the various components of environment and the significance of the sustainability of
healthy environment.
2 Identify the implications of different types of the wastes produced by natural and
anthropogenic activity.
3 Develop critical thinking for shaping strategies (scientific, social, economic and legal) for
environmental protection and conservation of biodiversity, social equity and sustainable
development.
4 Design the models that help mitigate or prevent the negative impact of proposed activity on
the environment in line with Sustainable Developmental Goals.
Unit I 08 hrs
Introduction: Climate action – Paris convention, Sustainable Developmental Goals in
relation to environment, Components of environment, Ecosystem. Environmental
education, Environmental acts & regulations, role of non-governmental organizations
(NGOs), EMS: ISO 14000, Environmental Impact Assessment. Environmental auditing.
Unit II 09 hrs
Pollution and its remedies: Air pollution – point and non-point sources of air pollution
and their controlling measures (particulate and gaseous contaminants). Noise pollution,
Land pollution (sources, impacts and remedial measures),
Water management: Advanced water treatment techniques, water conservation
methods.
Waste management: Solid waste, e-waste & biomedical waste – sources, characteristics
& disposal methods. Concepts of Reduce, Reuse and Recycling of the wastes.
Waste to Energy: Different types of Energy, Conventional sources & Non-conventional
sources of energy: Solar, Hydro Electric, Wind, Nuclear, Biomass & Biogas Fossil Fuels
and Hydrogen.
Unit III 09 hrs
Environmental design: Green buildings, green materials, Leadership in Energy and
Environmental Design (LEED), Hydroponics, Organic Farming, Biofuels, IC engine to
E mobility transition and its impacts, Carbon Credits, Carbon Foot Prints, Opportunities
for Green Technology Markets, Carbon Sequestration.
Resource recovery system: Processing techniques, Materials recovery systems,
Biological conversion (composting and anaerobic digestion). Thermal conversion
products (Combustion, Incineration, Gasification, Pyrolysis, use of Refuse Derived
Fuels). Case studies.
3
Reference Books
1. Shashi Chawla, A Textbook of Environmental Studies, McGraw Hill Education, 2017,
ISBN: 1259006387,
2. Richard A Schneider and Jerry A Nathanson, Basic Environmental Technology,
Pearson, 6th Edition, 2022. ISBN: 9789332575134,
3. G. Tyler Miller (Author), Scott Spoolman (Author), (2020) Environmental Science –
15th edition, Publisher: Brooks Cole, ISBN-13: 978-1305090446 ISBN-10: 130509044
4. Howard S. Peavy, Donald R. Rowe and George Tchobanoglous. 2000. Environmental
Engineering, McGraw Hill Education, First edition (1 July 2017). ISBN-10:
9351340260, ISBN-13: 978-9351340263
CO1: Identify the components of environment and exemplify the detrimental impact of
anthropogenic activities on the environment.
CO2: Differentiate the various types of wastes and suggest appropriate safe technological
methods to manage the waste.
CO3: Apply different renewable energy resources and can analyse the nature of waste and
propose methods to extract clean energy.
CO4: Adopt the appropriate recovering methods to recover the essential resources from the
wastes for reuse or recycling.
Experiential learning topics

Assessment of the environment of certain big campuses/areas/industries etc, a case study
1 Development of data sheet
2 Survey and its record
3 Identifying the problems associated
4 Provide a solution for the identified problem
Experiments to be performed
1 Data development
2 Working model (in silico or demo model)
3 Preparing a report
4 Brainstorming of the work carried out.
4
CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
Quiz-I Each quiz is evaluated for 5 marks
Quiz-II adding up to 10 MARKS.
THEORY COURSE
(Bloom’s Taxonomy Levels: Remembering, Understanding, Applying,
Analyzing, Evaluating, and Creating)

Test – II Final test marks will be reduced to
20 MARKS
Case Study-based Teaching-Learning 10
Experiments performed 10
MAXIMUM MARKS FOR THE 50
50 MARKS
THEORY MARKS
TOTAL MARKS FOR THE COURSE 50 100
Experiential learning evaluation will be evaluated based on the experiments and the preparation,
presentation of the topics, equal weightage is given for experiments and theory.
5
Semester: III
LINEAR INTEGRATED CIRCUITS
(Theory and Practice)
Course Code : 21EE33 CIE : 150 Marks
Total Hours : 42L+0+30P SEE Duration : 3Hours + 3Hours
Unit-I 08 Hrs
Operational Amplifier Characteristics: Operational Amplifier characteristics, DC performance
characteristics of Op-Amp, AC performance characteristics of Op-Amp, Frequency Compensation,
Noise, Open-loop op-amp Configurations, Closed-loop Op-Amp Configurations, Differential Amplifier,
General description, Manufacturer’s Specifications and Electrical Characteristics of the Op-Amp, Power
supply Connections.
Unit – II 08Hrs
Applications of Operational Amplifiers: Sign Changer, Scale Changer, Phase Shift Circuits, Voltage
Follower, Voltage-Controlled Voltage Source, Current Sources, Inverting current Amplifier, Current-
Controlled Current Source, Voltage to current converter, Current to Voltage Converter, Adder,
Subtractor, Adder-Subtractor, Instrumentation Amplifier, AC amplifier, Integrator, Differentiator.
Waveform Generator: Sine-wave Generators, Multivibrators, Triangular Wave Generators, Sawtooth
Wave Generators, Timer IC 555.
Unit –III 09 Hrs
Voltage Regulators: Basics of Voltage Regulator, Linear Voltage Regulators Using Op-amps, IC
Voltage Regulators, three terminal Adjustable Voltage Regulator, General Purpose Regulator, Switched
Mode Power Supplies, Voltage Controlled Oscillators.
Operational Amplifier-Non-linear Circuits: Op-Amp Comparators, Schmitt Trigger, Precision
Rectifier, Analog Switches, Peak Detectors, Sample and Hold circuits.
Unit –IV 09Hrs
Active Filters: Introduction, Comparison Between Passive and Active Networks, Active Network
Design, Filter Approximations, General Second Order Filter with Unity Gain and Variable Gain, Design
of Low-pass Filters. Types: High-pass Filters, Bandpass Filters, Band-reject filters, All-pass Filters,
State-variable Filters, Impedance Converter, Impedance Gyration, Switched Capacitor Filters,
Chebyshev Filters, Butterworth Filters.
Unit –V 08Hrs
D/A and A/D Converters: Analog and Digital Data Conversions, Specifications of D/A Converter,
Basic D/A Conversion Techniques, Switches for D/A Converters, Multiplying D/A Converters,
Monolithic D/A Converter, Microprocessor Compatible D/A Converter, Sampling Process, High Speed
Sample and Hold Circuit, A/D Converters, Specifications of A/D Converter, Classification of A/D
Converter, Over-Sampling A/D Converters.
Special Function Integrated Circuits: Voltage-to-frequency and Frequency to voltage Converters,
Series Voltage-to-frequency and Frequency-to-Voltage Converters, Function Generator, Integrated
Circuit Tuned Amplifier, Audio Power Amplifier,
Course Outcomes: After completing the course, the students will be able to:-
CO 1 Understand the basics of operational amplifiers
CO 2 Analyze the performance of OPAMP and build simple circuits using OPAMP
CO 3 Apply the concepts to design various applications of OPAMP
CO 4 Design a system using various ICs for a specific application.
6
Reference Books
Linear integrated circuits, S Shalivahanan, V S Kanchana Bhaskaran, Mc.Grawhill Publications,
1. 2018, ISBN: 10:0-07-064818-2
Electronic Devices and Circuit Theory, Robert L.Boylestad, Louis Nashelsky, 8th Edition, 2010,
2.
Pantice-Hall India,.ISBN:81-203-2064-6
Microelectronics circuits Analysis and Design, M.H Rashid,2nd Edition, 2011, Thomson Publication,
3.
ISBN:0-534-95174-0
Microelectronics circuits, Sedra & Smith, 5th edition, Oxford Publication, ISBN-13: 978-
4.
0195338836
5. Microelectronics, Millman & Grabel, TMH 2nd Edition, And ISBN13:9780074637364.
Laboratory Component
Hardware design and simulation of the following to be carried out
1. Input and output characteristics of transistor in CE configuration
2. Frequency response of RC coupled amplifier
3. Experimental verification of simple applications of OPAMP 741 such as inverting amplifier,
non-inverting amplifier, adder/subtractor, integrator and differentiator circuits
4. Design and implementation of peak detector, half wave and full wave precision rectifiers
using operational amplifier IC741
5. Design and implementation of a Schmitt trigger circuit for given UTP & LTP using op-amp
6. Design and implementation of active 2 nd order low pass and high pass filters and to obtain
the frequency response of the filters
7. Realization of 4 bit DAC using R-2R ladder network and asynchronous decade counter IC
7490
8. Realization of 2 bit flash type ADC
9. Design and implementation of RC phase shift oscillator by simulation and experiment
PART B
Innovative Experiments (IE)
A. Design and implementation of astable and monostable multivibrators using 555 timer
B. Analysis of function generator using operational amplifier (sine, triangular, and square
wave)
C. Analysis of voltage comparator
D. Design of voltage regulator using IC 7900
E. Generation of ramp wave for a given frequency using NE 555 timer
7
CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
Quiz-II marks adding up to 20 MARKS.
THEORY COURSE
40 MARKS
Applications of Linear Integrated Circuits 20
Video based seminar (4-5 minutes per student) 10
100
MARKS
PRACTICALS 50 50
8
Semester: III
ANALYSIS AND DESIGN OF DIGITAL CIRCUITS
(Theory & Practice)
(Common to EC, EE, EI & ET)
Course Code : 21EC34 CIE : 100+50 Marks
Credits: L:T:P : 3:0:1 SEE : 100+50 Marks
Total Hours : 42 L+30P SEE Duration : 3Hours + 3 Hours
Unit-I 08 Hrs
Number System: Decimal, Binary, Octal, Hexadecimal, 1‘s and 2‘s complements, Codes – Binary,
BCD, Excess 3, Gray Codes and Conversion.
Sum of products and Product of sums, Minterm and Maxterm, Karnaugh map Minimization. (Up to 4
Variables). Quine-McCluskey method of minimization.
Digital Integrated Circuits: Digital IC Logic Families: TTL family, Propagation delay, Power
Dissipation, noise margin,fan-out, and fan-in.
Unit – II 08 Hrs
Combinational Logic Design:
Design of Half and Full Adders, Half and Full Subtractors using Universal gates., Binary Parallel
Adder /Subtractor– Carry look ahead Adder, BCD Adder, Multiplier, Magnitude Comparator,
Multiplexer, Demultiplexer, Decoder, Encoder, Priority Encoder, Parity Bit Generator/Checker.
Unit –III 09 Hrs
Introduction, Latches and Flip Flops: Triggering of Flip Flops, Characteristics Equation Flip Flop
Excitation Tables, Flip-Flop conversions. Propagation delay, setup and hold time.
Synchronous Sequential Circuits Design:
Introduction to FSM (Mealy and Moore), Analysis of Clocked Sequential Circuits, State table and
Reduction, State Diagram, Design of synchronous Counter (mod-n counter), Integrated Circuit
Synchronous Counter.
Unit –IV 09 Hrs
Asynchronous Sequential Circuit Design:
Design of Ripple/Asynchronous Counter (mod-n counter), Effects of Propagation delay in Ripple
Counter, Integrated Circuit Ripple Counter.
Registers:
Registers, Shift Registers and Various Operations, Ring counters, Johnson counters, Design of Sequence
Detector and Sequence Generators (PRBS), Serial Adder/Subtractor Design.
Unit –V 08 Hrs
ALU design:
Processor Organization, Design of Arithmetic Unit, Design of Logic unit, Design of Arithmetic and
Logic unit, Status Register, Design of Shifter, The Complete Processor unit and op-code generation.
9
CO1: Analyse and implement different types of digital circuits for area, delay and power
constraints.
CO2: Comprehend the knowledge of digital circuits to construct combinational and sequential sub-
systems useful for digital system designs.
CO3: Design of digital circuits for a particular application using simulation and hardware
implementation.
CO4: Evaluate the performance of different digital circuits to apply in real world applications.
Reference Books
Digital Logic and Computer Design, M. Morris Mano, Pearson Education Inc., 13th
1 Impression, 2011, ISBN: 978-81-7758-409-7.
Fundamentals of Logic Design, Charles H. Roth (Jr.), West publications, 4th Edition, 1992,
2 ISBN-13: 978-0-314-92218-2.
Digital Fundamentals, Thomas Floyd, 11th Edition, Pearson Education India, ISBN 13: 978-
3 1- 292-07598-3, 2015.
Digital Principle and Design, Donald D. Givone, Mc Graw-Hill, ISBN: 0-07-119520-3
4 (ISE),2003.
Digital Principles and Applications, Albert Paul Malvino and Donald P Leach, 7th Edition,
5 Tata McGraw Hill Education Private Limited, 2011, ISBN (13 digit): 978-0-07-014170-4
and ISBN (10 digit): 0-07-014170-3.
Practical’s:
1. Truth Table verification of NOT, AND, OR, XOR, XNOR, NAND, NOR gates using IC trainer
kit. Realization of Binary Adder and Subtractor IC-7483.
2. Realization of Boolean Function using MUX/DEMUX (IC-74153, IC-74139.)
3. Design of synchronous 3-bit up/down counter using IC-7476/IC-74112 on IC trainer kit.
4. Realization of Binary Adder and Subtractor using Verilog
5. Realization of Multiplexer/Decoders/Encoder in Verilog.
6. Realization of D, T, JK flip flop in Verilog using behavioral modelling on FPGA board.
7. Design of synchronous (up/down/BCD counter in Verilog using behavioral modelling.
8. Design of Shift register, ring counter, Johnson counter using Verilog
9. Design of Sequence generator and detector.
10. Open ended experiment
Innovative Experiment:
1. Multiplier Designs (Booth, Wallace)
2. Basic Processor Design
10
CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
THEORY COURSE
40 MARKS
Applications of Linear Integrated Circuits 20
100
MARKS
PRACTICALS 50 50
11
Semester: III
NETWORK ANALYSIS

Unit-I 05 Hrs
Fundamental Concepts:
Introduction, voltage and current sources, classification of sources, source transformation, source
shifting, Mesh and Node analysis with linear dependent and independent sources for DC and AC
networks. Principle of duality.
Unit – II 07 Hrs
Network Theorems:
Superposition, Reciprocity, Thevenin’s, Norton’s, Maximum Power transfer and Millman’s theorems for
AC and DC excited networks.
Unit –III 06 Hrs
Poly phase Circuits:
Analysis of unbalanced loads connected to balanced Star connected three-phase supply
Resonance in Networks: Analysis of Series and parallel resonant circuits, Frequency response by
varying f, L, C.
Unit –IV 05 Hrs
Laplace Transformation and Applications:
Behaviour of circuit elements under switching conditions and their representation. Application of
Laplace transforms for circuit analysis, Evaluation of initial and final conditions in R-L, R-C and R-
L-C Circuits for DC and AC excitations. Waveform synthesis, Network functions of single port & two
port networks-Driving point & transfer functions.
Unit –V 05 Hrs
Two port networks:
Impedance (Z), Admittance (Y), Transmission (ABCD) and Hybrid parameters, their inter relationship.
Analysis Series and parallel connection of networks.
Coupled Circuits:
Introduction, Dot convention, series and parallel circuits, Analysis of coupled circuits.
CO 1 Understand the basic concepts of circuits, theorems, coupled circuits, resonant circuits, three
phase unbalanced circuits Laplace transform.
CO 2 Analyse DC and AC circuits, coupled circuits, resonant circuits, poly-phase circuits and two
port networks.
CO 3 Evaluate the performance of networks in the steady state and transient state of AC and DC
circuits.
CO 4 Apply Laplace Transform and Design the Electric Circuit.
Reference Books
Engineering Circuit Analysis, Hayt, Kemmerly and Durbin, 8th Edition, 2002,TMH, ISBN-10:
1.
0071122273.
2. Network Analysis, M.E Van Valkenberg, , 3rd Edition, Reprint 2002, PHI, ISBN81-7808-729-42.
12
Circuit Analysis, A NAgoor Kani, 1st Edition, McGraw Hill Education, 2018, ISBN-13 : 978-
3.
9387572720.
Network Theory, K Channa Venkatesh , D Ganesh Rao, 1st Edition, Pearson Education,2012, ISBN-
4.
13- 9788131732311

CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
THEORY COURSE
40 MARKS
Circuit Analysis using VI labs 20
100
MARKS
13
Semester: III
MEASUREMENT AND TRANSDUCERS

Total Hours : 28L SEE Duration : 2.00 Hours
Unit-I 9 Hrs
Introduction to measuring Instruments:
Measurement systems, characteristics and error, Definitions, Types of errors, performance characteristics,
Limiting errors, probability of Errors, Standards of measurements.
Measuring Instruments & Range Extension:
Multi range DC ammeters, requirements of shunt, extending ammeter ranges, multi range DC voltmeter,
extending voltmeter range. Micro voltmeter, AC voltmeter using Rectifiers –Peak responding and True
RMS voltmeters, Instrument transformer (Theory and basic definitions)
Digital Instruments (Block diagram and theory):
Electronic counter, Gate generator, Logic circuits, Digital Tachometer, Digital pH meter, Universal
counter, Universal counter, Digital Voltmeter, Digital Multi Meter, Digital LCR meter, Digital Energy
meter.
Unit – II 9 Hrs
Signal Generators and Analyzers:
Sine wave generator, Frequency synthesised signal generator, Function generator, Pulse and square
wave generator, Audio Frequency function generator, wave analyzers, spectrum analyzers and harmonic
distortion analyzers.
Display Devices:
Digital display system, classification, LEDs & LCD.
Sensors – Principle of working & limitations:
Types – Temperature Sensors, Proximity Sensor, Accelerometer, IR-Sensor (Infrared Sensor),Pressure
Sensor, Light Sensor, Ultrasonic Sensor, Smoke , Gas and Alcohol Sensor
Unit –III 10 Hrs
Digital Acquisition Systems: Objectives of DAS, Digital Loggers.
Transducers- Basic Principle, applications & limitations:
Introduction, Electrical transducers, Selecting a transducer ,Resistive transducer, Resistance pressure
transducer ,Resistive position Transducer, Explanation of basic strain gauge, strain gauges(gauge factor
derivation), semiconductor strain gauge, Resistance Thermometer, Thermistor.
Inductive Transducer, Variable Reluctance type transducer ,Differential output Transducer, LVDT,
pressure inductive Thermo couple transducer,
Capacitive transducer, photo electric Transducers, RTD, capacitive transducer, Photoelectric
transducer, Photovoltaic transducer, Temperature transducers-RTD, Thermocouple, Piezo electric
transducer.
14
CO 1 Understand the measuring techniques in analog and digital systems.
CO 2 Analyze the different methods of implementation in the working of measuring instruments and
compare the end results.
CO 3 Evaluate and asses the performance of different measuring instruments.
CO 4 Plan and design various measuring instruments for their innovation.
Reference Books
1 Electronic Instrumentation, H. S. Kalsi, 4th Edition 25 March2019 , TMH, ISBN-9780074621868
Modern electronic instrumentation and measuring techniques, Cooper D & A D Helfrick, 2016
2
PHI,.ISBN-8120307526
Electronics & electrical measurements , A K Sawhney , 19th edition, 2016, Dhanpat Rai &
3
sons,.ISBN-10: 8177001000
nd
Electronic Instrumentation and Measurements , David A Bell, 2 Edition, 20013, PHI,, ISBN 10:
4
0132499541

CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
Quiz-I Each quiz is evaluated for 5 marks
Quiz-II adding up to 10 MARKS.
THEORY COURSE
20 MARKS
Applications of Measurement and Transducers 10
MAXIMUM MARKS FOR THE THEORY 50 MARKS 50MARKS
15
Semester: III
Bridge Course: MATHEMATICS
(AS, BT, CH, CV, EC, EE, EI, IM, ME, TE)
Course Code : 21DMA37 CIE : 50 Marks
Credits: L:T:P : 2:0:0
Audit Course
Unit-I 05 Hrs
Differential Calculus:
Partial derivatives – Introduction, simple problems. Total derivative, composite functions. Jacobians
– simple problems.
Unit – II 05 Hrs
Vector Differentiation:
Introduction, simple problems in terms of velocity and acceleration. Concepts of gradient,
divergence – solenoidal vector function, curl – irrotational vector function and Laplacian, simple
problems.
Unit –III 06 Hrs
Differential Equations:
Higher order linear differential equations with constant coefficients, solution of homogeneous
equations-Complementary functions. Non-homogeneous equations –Inverse differential operator
method of finding particular integral based on input function (force function).
Unit –IV 05 Hrs
Numerical Methods:
Solution of algebraic and transcendental equations – Intermediate value property, Newton-Raphson
method. Solution of first order ordinary differential equations – Taylor series and 4th order Runge-
Kutta methods. Numerical integration – Simpson’s 1/3rd, 3/8th and Weddle’s rules. (All methods
without proof).
Unit –V 05 Hrs
Multiple Integrals:
Evaluation of double integrals, change of order of integration. Evaluation of triple integrals.
Applications – Area, volume and mass – simple problems.
CO1: Illustrate the fundamental concepts of partial differentiation, double integrals, vector
differentiation, solutions of higher order linear differential equations and numerical methods.
CO2: Derive the solution by applying the acquired knowledge of total derivatives of implicit
functions, Jacobians, homogeneous linear differential equations, velocity and acceleration
vectors to the problems of engineering applications.
CO3: Evaluate the solution of the problems using appropriate techniques of differential and
integral calculus, vector differentiation, differential equations and numerical methods to the
real-world problems arising in many practical situations.
16
CO4: Compile the overall knowledge of differential and integral calculus, vector differentiation,
differential equations and numerical methods gained to engage in life – long learning.
Reference Books
B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 44th Edition, 2015,
1
ISBN: 978-81-933284-9-1.
Higher Engineering Mathematics, B.V. Ramana, 11th Edition, 2010, Tata McGraw-Hill,
2
ISBN: 978-0-07-063419-0.
N.P. Bali & Manish Goyal, A Text Book of Engineering Mathematics, Lakshmi
3
Publications, 7th Edition, 2010, ISBN: 978-81-31808320.
Advanced Engineering Mathematics, E. Kreyszig, 10th Edition (Reprint), 2016. John Wiley
4
& Sons, ISBN: 978-0470458365.
Continuous Internal Evaluation (CIE); Theory (50 Marks)
CIE is executed by way of quizzes (Q) and tests (T). A minimum of two quizzes are conducted and each
quiz is evaluated for 10 marks adding up to 20 marks. The two tests are conducted for 30 marks each and
the sum of the marks scored from two tests is reduced to 30. Total CIE is 20(Q) +30(T)=50 Marks.
17
Course Title: National Service Scheme
(Practical)
Course Code : 21HSAE39A CIE : 50 Marks
Total Hours : L + T + 13 P SEE Duration : 2 Hours
Prerequisites:
1. Students should have service-oriented mindset and social concern.
2. Students should have dedication to work at any remote place, any time with available resources
and proper timemanagement for the other works.
3. Students should be ready to sacrifice some of the timely will and wishes to achieve service-
oriented targets on time.
Content 13 Hours
Students must take up any one activity on below mentioned topics and has to prepare contents
for awareness and technical contents for implementation of the projects and has to present
strategies for implementation of the same. Compulsorily must attend one camp.
CIE will be evaluated based on their presentation, approach, and implementation strategies.
(Any one of the below mentioned activity)
1. Helping local schools to achieve good result and enhance their enrolment in Higher/technical/
vocational education.
2. Preparing an actionable business proposal for enhancing the village/ farmer income and
approach for implementation.
3. Developing Sustainable Water management system for rural/ urban areas and implementation
approaches.
4. Setting of the information imparting club for women leading to contribution in social and
economic issues.
5. Spreading public awareness/ government schemes under rural outreach program. (Minimum
5 programs)
6. Contribution to any national level initiative of Government of India. For eg. Digital India,
Skill India, Swachh Bharat, Atmanirbhar Bharath, Make in India, Mudra scheme, Skill
development programs etc..
7. Social connect and responsibilities
8. Plantation and adoption of plants. Know your plants
9. Organic farming, Indian Agriculture (Past, Present and Future) Connectivity for marketing
10. Waste management – Public, Private and Govt organization, 5 R’s
11. Water conservation techniques – Role of different stakeholders - Implementation
12. Govt. School Rejuvenation and assistance to achieve good infrastructure.
13. Organize National integration and social harmony events/ workshops / seminars. (Minimum
2 programs)
AND ONE NSS-CAMP
18
CO1: Understand the importance of his/her responsibilities towards society.
CO2: Analyze the environmental and societal problems/ issues and will be able to design solutions
for the same.
CO3: Evaluate the existing system and to propose practical solutions for the same for sustainable
development.
CO4: Implement government or self-driven projects effectively in the field.

WEIGHTAGE 50% 50%
CIE SEE
Presentation 1- Selection of topic- (phase 1)
Justification for Importance, need of the 10 *****
hour with surveyed data.
EXPERIENTIAL LEARNING
Presentation 2 (phase 2) 10 *****
Content development, strategies for
implementation methodologies.
Case Study-based Teaching-Learning 10 Implementation
Sector wise study & consolidation 10 strategies of the
project with
report
TOTAL MARKS FOR THE COURSE 50 MARKS 50 MARKS
19
Semester: III
Course Title: National Cadet Corps
(Practical)
Course Code : 21HSAE39B CIE : 50 Marks
Credits: L: T:P : 0:0:1 SEE : 50 Marks
Total Hours : 15 P SEE Duration : 2 Hrs
Unit I 7 Hrs
Drill (Contact Hrs. 12). Foot Drill- Drill ki Aam Hidayaten, Word ki Command, Savdhan, Vishram,
Aram Se, Murdna, Kadvar Sizing, Teen Line Banana, Khuli Line, Nikat Line, Khade Khade Salute
Karna
Unit II 3 Hrs
Weapon Training (WT): Introduction & Characteristics of 7.62 Self Loading rifle, Identification of
rifle parts
Unit III 3 Hrs
Adventure activities: Trekking and obstacle course
Unit IV 2 Hrs
Social Service and Community Development (SSCD): Students will participate in various activities
throughout the semester e.g., Blood donation Camp, Swachhata Abhiyan, Constitution Day, All
National Festival
Course Outcomes: Cadets will be able to: -

CO1 Understand that drill as the foundation for discipline and to command a group for common goal.
CO2 Understand the importance of a weapon its detailed safety precautions necessary for
prevention of accidents and identifying the parts of weapon
CO3 Understand that trekking will connect human with nature and cross the obstacles toexperience
army way of life.
CO4 Understand the various social issues and their impact on social life, Develop the sense of self-
less social service for better social & community life.
Reference Books
NCC Cadet Hand Book by R K Gupta, Ramesh Publishing House, New Delhi, Book code:R-
1
1991, ISBN: 978-93-87918-57-3, HSN Code: 49011010
2 nccindia.ac.in
20
WEIGHTAGE 50% 50%
CIE SEE
Drill Skill Test 20 *****
Weapon Training 10 *****

Adventure activities 10 Report on
adventure and
Social service activities 10 social service
activities
21
Semester: III
PHYSICAL EDUCATION (SPORTS & ATHLETICS)
(Practical)
Course Code : 21HSAE39C CIE : 50 Marks
Total Hours : L + T + 13 P SEE Duration : 2 Hours
Introduction of Physical Education and Sports

General & Specific warm up exercises
Conditioning exercises
Any 2 Major Games
Intramural Competitions
Choose any one according to serial no
1. Kho-Kho Giving Kho, Single chain, Pole 6. Kabaddi Hand touch, Chain hold, Ankle
dive, Pole turning, 3-6 Up hold, Thigh hold, Getting bonus
2. Throwball Service, Receive, Spin pass, 7. Volleyball Attack, Block, Service, Upper hand
Simple pass, Jump throw pass, Lower hand pass
3. Netball Step with ball, Shooting, 8. Handball Step with ball, Shooting,
Passing, Blocking Passing, Blocking, Dribbling
4. Softball Catching, Pitching, Slugging, 9. Football Dribbling, Chest Drop, Ball
Base Running, Stealing Control, Thigh Drop, Shooting
5. Ball Service, Fore hand receive, Back 10. Table Service, Fore hand receive, Back
badminton hand receive, Spin smash, Rally Tennis hand receive, Smash, Rally
CO1 Understand the basic principles and practices of Physical Education and Sports.
CO2 Instruct the Physical Activities and Sports practices for Healthy Living
To develop professionalism among students to conduct, organize & Officiate Physical Education
CO3
and Sports events at schools and community level
Topics for Viva:
1. On rules and regulations pertaining to the games / sports
2. On dimensions of the court, size / weight of the ball and standards pertaining to that sports / game
3. Popular players and legends at state level / National level/ International level
4. Recent events happened and winner / runners in that particular sport / game
5. General awareness about sport / game, sports happenings in the college campus
Reference Books
1 Muller, J. P. (2000). Health, Exercise and Fitness. Delhi: Sports.
2 Vanaik.A (2005) Play Field Manual, Friends Publication New Delhi
22
3 IAAF Manual
M.J Vishwanath, (2002) Track and Field Marking and Athletics Officiating Manual, Silver
4
Star Publication, Shimoga
5 Steve Oldenburg (2015) Complete Conditioning for Volleyball, Human Kinestics.
Note: Skills of Sports and Games (Game Specific books) may be referred

CIE-50 MARKS
Activity book- 10 marks
QUIZZES
marks adding up to 20 MARKS.
Quiz-II
Test – I Demonstration of skills is evaluated
for10 marks adding up to 20
Test – II
MARKS.
SEE-50 MARKS
Practical 30 marks
Viva voce 20 marks
Total 50 marks
Rubric for CIE (2022 Scheme) Rubric for SEE (2022 Scheme)
Sl. No. Content Marks Sl. No. Content Marks
1 Attendance 10 1 Performing Skills 30
2 Performing Skills 20 (Any Two)
(Any Two)
3 Court measurement 20 2 Viva 20
(Markings)
Total: 50 Total: 50
23
Semester: III
Course Title: Music
(Practical)
Course Code : 21HSAE39D1 CIE : 50 Marks
Credits: L:T:P 0:0:1 SEE : 50 Marks
Total Hours : 13P SEE Duration : 2 Hours
Prerequisites:
1. Students should know basics of music.
2. Students should have dedication to learn and improve on their musical skills.
3. Students should have participated in musical events and have basic knowledge on how to present
their music.
Content 13 Hours
1. Introduction to different genres of music
2. Evolution of genres in India: Inspiration from the world
3. Ragas, time and their moods in Indian Classical Music
4. Identification of ragas and application into contemporary songs
5. Adding your touch to a composition
6. Maths and Music: A demonstration
7. Harmonies in music
8. Chords: Basics and application into any song
9. Music Production-I
10. Music Production-II
Students have to form groups of 2-4 and present a musical performance/ a musical task which
shall be given bythe experts. The experts shall judge the groups and award marks for the same.
CIE will be evaluated based on their presentation, approach and implementation strategies.
Students need to submit their certificates of any event they participated or bagged prizes in. This
shall also be considered for CIE evaluation.
CO1 Understand basics of Music and improve their skills
CO2 Appreciate the impacts on health and well being
CO3 Perform and present music in a presentable manner
CO4 Develop skills like team building and collaboration
24
Reference Books
1. Music Cognition: The Basics by Henkjan Honing
2. Basic Rudiments Answer Book - Ultimate Music Theory: Basic Music Theory Answer Book by
Glory St Germain
3. Elements Of Hindustani Classical Music by Shruti Jauhari
4. Music in North India: Experiencing Music, Expressing Culture (Global Music Series) by George
E. Ruckert

WEIGHTAGE 50% 50%
CIE SEE
Presentation 1- Selection of topic- (phase 1) 10 *****
EXPERIENTIAL LEARNING 10 *****
Presentation 2 (phase 2)
project with report
Video based seminar (4-5 minutes per 10
student)
25
Semester: III
Course Title: Dance
(Practical)
Prerequisites:
1. Students should have the will and interest to learn dancing.
2. Students should have a positive mindset.
3. Students should be willing to interact and cooperate in group activities.
Content 13 Hours
1. Introduction to Dance
2. Preparing the body for dancing by learning different ways to warm up.
3. Basics of different dance forms i.e. classical, eastern, and western.
4. Assessing the interest of students and dividing them into different styles based on interaction.
5. Advancing more into the styles of interest.
6. Understanding of music i.e. beats, rhythm, and other components.
7. Expert sessions in the respective dance forms.
8. Activities such as cypher, showcase to gauge learning.
9. Components of performance through demonstration.
10. Introduction to choreographies and routines.
11. Learning to choreograph.
12. Choreograph and perform either solo or in groups.
CO1: Understand the fundamentals of dancing.
CO2: Adapt to impromptu dancing.
CO3: Ability to pick choreography and understand musicality.
CO4: To be able to do choreographies and perform in front of a live audience.
Reference Books
1 Dance Composition: A practical guide to creative success in dance making by Jacqueline M.
Smith-Autard
26
WEIGHTAGE 50% 50%
CIE SEE
project with
Video based seminar (4-5 minutes per student) 10 report
27
Semester: III
Course Title: Lights Camera Drama
(Practical)
Prerequisites:
1. Students should have creative oriented mindset and social concern.
2. Students should have dedication to work with their classmates for long hours until a collective
goal is reached.
3. Students should be ready to sacrifice some of the timely will and wishes to achieve targets on
time.
Content 13 Hours
1. Break the ICE
2. Introduction to freedom Talk to each and every single person for a period of 5 complete
minutes. This is aimed at to make everyone in the room comfortable with each other. This
helps everyone get over social anxiety, Shyness and Nervousness.
3. Ura
4. Rhythm Voice Projection, Voice Modulation, Weeping & Coughing Voice projection is
the strength of speaking or singing whereby the voice is used powerfully and clearly. It is a
technique employed to command respect and attention, as when a teacher talks to a class, or
simply to be heard clearly, as used by an actor in a theatre.
5. It’s Leviosa, Not Leviosaaa!
6. Speech work: Diction, Intonation, Emphasis, Pauses, Pitch and Volume Tempo
Dialogues delivery. The artof dialogue delivery plays a vital role in in ensuring the efficacy
of communication especially from the dramatic aspect of it, this unit discusses some tips to
help the young actors improve their dialogue delivery skills:
7. Elementary, My dear Watson.
8. Responsibilities of an actor tools of an actor character analysis Observations aspects,
Stage presence, concentration, conviction, confidence, energy and directionality.
9. Show time
10. Pick a genre: COMEDY, THRILLER, HORROR, and TRAGEDY: Showcase a
performance. Stylized acting with reference to historical and mythological plays. Mime:
conventional, occupational and pantomime Mono acting: different types of characters
CO1: Develop a range of Theatrical Skills and apply them to create a performance.
CO2: Work collaboratively to generate, develop and communicate ideas.
CO3: Develop as creative, effective, independent and reflective students who are able to make
inform edchoices in process and performance.
28
CO4: Develop an awareness and understanding of the roles and processes undertaken in
contemporary professional theatre practice.
CIE’s will be evaluated through mono-acting or dialogue. The students need to use whatever they’ve
learnt through the course of the drama class. Judges/Teachers can award the marks accordingly.
Certificates wonoutside of college, can be submitted for evaluation as well. For SEE’s. Students need
to form groups of 4-6. They need to pick a genre and enact a play of at least 20 minslong. The venue will
be IEM auditorium. No mics should be used. They will be given 2 weeks to prepare.
Reference Books
1 The Empty Space by Peter Brook
2 The Viewpoints Book: A Practical Guide to Viewpoints and Composition by Anne Bogart and Tina
Landau

WEIGHTAGE 50% 50%
CIE SEE
Presentation 1- Selection of Script (phase 1)
10 *****
EXPERIENTIAL LEARNING
10 *****
Interpretation of Script 10 strategies of the
Performance based seminar (20 mins long) 10 project with report
29
Semester: III
Course Title: Art
(Practical)
Prerequisites:
Although there are no prerequisite qualifications for this subject, students must have a basic
understanding of and interest in the fields of art and design in order to enroll in it.
Content 13 Hours
1. Use points, line and curves to create various shapes and forms
2. Use of shapes and forms to create various objects and structures
3. Recognizing distinctions in objects when viewed from various perspectives and grasping
basic notions of perspective
4. Students will be introduced to the significance of color in art, as well as the principles of
color theory and application.
5. Applied the concepts of unity, harmony, balance, rhythm, emphasis and proportion,
abstraction and stylization to create a composition.
6. Learn how to use which materials and for what types of art and textures.
7. Use of the above concepts to create art through the medium of collage, mosaic, painting,
mural, batik, tie and dye.
8. Real world application of the above concepts in the form of book cover design and
illustration, cartoon, poster, advertisements, magazine, computer graphics and animation
9. Familiarization with the many art forms and techniques of expression found throughout
India.
AND
ONE EDUCATIONAL VISIT TO AN ART MUSEUM / INSTITUTE / GALLERY
Students must turn in assignments for each of the above said topics on a weekly basis and
have to compulsorily take part in the museum visit. CIE will be evaluated based on a still life
piece, a composition using any one of the media of composition and a presentation on Indian
art styles and creation of a piece pertaining to the presented art style.
Reference Books
1. Catching the Big Fish: Meditation, Consciousness, and Creativity by David Lynch
2. Art & Fear: Observations on the Perils (and Rewards) of Artmaking by David Bayles & Ted
Orland
30
CO1: To use lines, shapes, and colors to depict the various sentiments and moods of life and nature.
CO2: To use one's creativity to develop forms and color schemes, as well as the ability to portray
them effectively in drawing and painting on paper.
CO3: To develop the ability to properly use drawing and painting materials (surfaces, tools and
equipment, and so on).
CO4: To improve their observation abilities by studying everyday items as well as numerous
geometrical and non- geometrical (i.e. organic) shapes found in life and nature and to hone
their drawing and painting talents in response to these insights.

WEIGHTAGE 50% 50%
CIE SEE

project with report
31
Semester: III
Course Title: Photography
(Practical)
Prerequisites:
1. Students should know basics of photography and cinematography.
2. Students should have dedication to learn and improve on their photography and film making skills.
3. Students should have participated in photography events.
4. Students should have a DSLR camera.
Content 13 hours
1. Introduction to photography.
2. Understanding the terminologies of DSLR.
3. Elements of photography.
4. Introduction to script writing, storyboarding.
5. Understanding the visualization and designing a set.
6. Basics of film acting
7. Video editing using software
8. Introduction to cinematography.
9. Understanding about lighting and camera angles.
10. Shooting a short film.
Students must form groups of 2-4 and present a short film which shall be given by the experts. The
experts shall judge the groups and award marks for the same.
CIE will be evaluated based on their presentation, approach and implementation strategies.
Students need to submit their certificates of any event they participated or bagged prizes in. This
shall also be considered for CIE evaluation.
CO1: Understand basics of photography and videography and improve their skills
CO2: Appreciate the skills acquired from photography
CO3: Perform and present photos and films in a presentable manner
CO4: Develop skills like team building and collaboration
Reference Books
1. Read This If You Want to Take Great Photographs – Henry Carroll
2. The Digital Photography Book: Part 1 – Scott Kelby
32
WEIGHTAGE 50% 50%
CIE SEE
Case Study-based Teaching-Learning 10 Implementation strategies of
Sector wise study & consolidation 10 theproject with report
33
Semester III
Course Title: SUMMER INTERNSHIP-I (Practice)
Course Code : 21EEI310 CIE Marks : 50 Marks
Credits: L:T:P : 0:0:2 SEE Marks : 50 Marks
Total Hours : 3 Weeks SEE Duration : 1 Hours
Guidelines 3 Weeks
1. A minimum of 1 credit of internship after I year may be counted towards B.E. degree program.
2. During II semester to III semester transition, Three weeks of internship is mandatory.
3. Internship report and certificate need to be submitted at the end of the internship to the concerned
department for the evaluation.
4. Internship evaluation will be done during III semester for 1 credit in two phases.
5. Students can opt the internship with the below options:
A. Within the respective department at RVCE (Inhouse) Departments may offer

internship opportunities to the students through the available tools so that the students
come out with the solutions to the relevant societal problems that could be completed
within THREE WEEKS.
B. At RVCE Center of Excellence/Competence
RVCE hosts around 16 CENTER OP EIXCELLENCE in various domains and
around 05 CENTER OP COMPETENCE. The details of these could be obtained by
visiting the website https:/ /rvce.edu.in / rvce-center-excellence. Each center would
be providing the students relevant training/internship that could be completed in three
weeks.
C. At Intern Shala
Intern Shala is India's no.1 internship and training platform with 40000+ paid
internships in Engineering. Students can opt any internship for the duration of three
weeks by enrolling on to the platform through https: / /internsha1a.com
D. At Engineering Colleges nearby their hometown
Students who are residing out of Bangalore, should take permission from the nearing
Engineering College of their hometown to do the internship. The nearby college should agree
to give the certificate and the letter/email stating the name of the student along with the title of
the internship held with the duration of the internship in their official letter head.
E. At Industry or Research Organizations
Students can opt for interning at the industry or research organizations like BEL,
DRDO, ISRO, BHEL, etc. through personal contacts. However, the
institute/industry should provide the letter of acceptance through hard
copy/email with clear mention of the title of the work assigned along with the
duration and the name of the student.
Procedures for the Internship:
1. Request letter/Email from the office of respective departments should go to
Places where internships are intended to be carried out with a clear mention of the
34
duration of Three Weeks. Colleges/Industry/ CoEs/CoCs will confirm the training
slots and the number of seats allotted for the internship via confirmation letter/
Email.
2. Students should submit a synopsis of the proposed work to be done during
internship program. Internship synopsis should be assessed or evaluated by the
concerned Colleges/Industry/CoEs/CoC. Students on joining internship at the
concerned Colleges/Industry/ CoEs/CoCs submit the Daily log of student’s dairy
from the joining date.
3. Students will submit the digital poster of the training module/project after
completion of internship.
4. Training certificate to be obtained from industry.
CO1: Develop communication, interpersonal, critical skills, work habits and attitudes necessary for
employment.
CO2: Assess interests, abilities in their field of study, integrate theory and practice and explore career
opportunities prior to graduation.
CO3: Explore and use state of art modern engineering tools to solve societal problems with affinity
towards the environment and involve in professional ethical practice.
CO4: Compile, document and communicate effectively on the internship activities with the engineering
community.

CIE SEE
Phase – I 20
Phase- II 30 50
TOTAL MARKS FOR THE COURSE 50
35
Semester: IV
STATISTICS AND PROBABILITY FOR DATA SCIENCE
(Theory)
(Common to ALL Programs)
Course Code : 21MA41 CIE : 100 Marks
Unit-I 06 Hrs
Statistics:
Central moments, mean, variance, coefficients of skewness and kurtosis in terms of moments.
Correlation analysis, rank correlation, linear and multivariate regression analysis – problems.
Unit – II 06 Hrs
Random Variables:
Random variables-discrete and continuous, probability mass function, probability density
function, cumulative density function, mean and variance. Two or more random variables -
Joint probability mass function, joint probability density function, conditional distribution and
independence, Covariance and Correlation.
Unit –III 06 Hrs
Probability Distributions:
Discrete distributions - Binomial, Poisson. Continuous distributions – Exponential, Normal and
Weibul.
Unit –IV 06 Hrs
Sampling and Estimation:
Population and sample, Simple random sampling (with replacement and without replacement).
Sampling distributions of means (σ known), Sampling distributions of mean (σ unknown): t -
distribution, Sampling distributions of variance (σ unknown): Chi - squared distribution.
Estimation - Maximum Likelihood Estimation (MLE).
Unit –V 06 Hrs
Inferential Statistics:
Principles of Statistical Inference, Test of hypothesis - Null and alternative hypothesis,
Procedure for statistical testing, Type I and Type II errors, level of significance, Tests
involving the normal distribution, one – tailed and two – tailed tests, P – value, Special tests of
significance for large and small samples ( F, Chi – square, Z, t – test).
CO1 Illustrate the fundamental concepts of statistics, random variables, distributions,
sampling, estimation and statistical hypothesis.
CO2 Apply the acquired knowledge of statistics, random variables, distributions, sampling,
estimation and statistical hypothesis to solve the problems of engineering applications.
CO3 Analyze the solution of the problems using appropriate statistical and probability
techniques to the real world problems arising in many practical situations.
CO4 Interpret the overall knowledge of statistics, probability distributions and sampling
theory gained to engage in life-long learning.
36
Reference Books
Theory and Problems of Probability, Seymour Lipschutz & Marc Lars Lipson, 2nd Edition,
1
Schaum’s Outline Series, McGraw – Hill,2000, ISBN: 9780071386517.
Applied Statistics and Probability for Engineers, Douglas C. Montgomery and George C.
2
Runger, 7th Edition, John Wiley & Sons, 2019, ISBN: 9781119570615.
● Probability & Statistics for Engineers & Scientists, Ronald E. Walpole &
3
Raymond H. Myers, 9th edition, 2016, Pearson Education, ISBN-13: 9780134115856.
The Elements of Statistical Learning - Data Mining, Inference, and Prediction, Trevor
4 Hastie Robert Tibshirani Jerome Friedman, 2nd Edition, 2009 (Reprint 2017), Springer,
ISBN-10: 0387848576, ISBN-13: 9780387848570.

CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
Quiz-II marks adding up to 20 MARKS
THEORY COURSE
(Bloom’s Taxonomy Levels: Remembering, Understanding, Applying, Analysing,
Marks adding up to 100 marks.
to 40 MARKS
MATLAB 20
Model presentation/ case study/ video
20
preparation
MAXIMUM MARKS FOR THE
100 MARKS 100 MARKS
THEORY
37
Semester: IV
Materials for Electronics Engineering
(Common to EC, EE, EI & ET)
Course Code : 21EC42 CIE : 50 Marks
Credits: L: T:P : 2:0:0 SEE : 50 Marks
Total Hours : 28L SEE Duration : 2 Hours
Unit-I 10 Hrs
Introduction: Classification and Properties of Materials, Materials Used in Electrical and Electronic
Industries, Requirements and Future Developments of Electronic Materials, Case studies of advanced
electronics materials and applications.
Classical Theory of Electrical Conduction and Conducting Materials: Resistivity, TCR (Temperature
Coefficient of Resistivity) and Matthiessen’s Rule, Traditional Classification of Metals,
Insulators and Semiconductors, Drude’s Free Electron Theory, Hall Effect, Wiedemann–Franz Law,
Resistivity of Alloys, Nordheim’s Rule, Resistivity of Alloys, and Multiphase Solids
Unit – II 09 Hrs
Thin Film Electronic Materials: Techniques for Preparation of Thin Films, Thin Film Conducting
Materials, Thin Film Resistors, Transparent and Conductive Thin Films, Thin Film MagneticMaterials.
Organic Electronic Materials: Conducting Polymers, Charge carriers, Semiconducting Organic Materials,
Organic Light Emitting Diode, Organic FET
Unit –III 09 Hrs
Semiconductor devices: Intrinsic & Extrinsic Semiconductors, temperature dependence of conductivity,
direct and indirect recombination minority carrier life time.
Nanomaterials for Electronic Device Applications: Micro-/Nano-devices Using Nanostructured
Materials: CNT transistor, Single electron transistor.
Course Outcomes: After completing the course, the students will be able to:
CO 1 Explain electronics material classification, different physical properties and to the extend device
applications.
CO 2 Define the transport mechanism (in solid state & organic), working principle of electronic
material and assess material parameters for practical requirement.
CO 3 Summarize various fabrication, characterization and synthesis techniques for the electronic
nanomaterials and thin film growth.
CO 4 Identify and calculate material parameters including electrical conductivity, resistivity, magnetic
and optical properties for real-time electronic applications.
Reference Books
Introduction to Electronic Materials for Engineers, Wei Gao & Zhengwei Li, Nigel Sammes, 2nd
1.
Edition, World Scientific Publishing Co. Pvt. Ltd, ISBN:9789814293693.
Principles of Electronic Materials and Devices, S O Kasap, 4th Edition, 2018, McGraw Hill
2.
Education, ISBN-13: 978-0-07-802818-2.
Electronic Properties of Materials, Rolf E. Hummel, 4th Edition, 2011, Springer, ISBN-13: 978-
3.
1489998415.
38
CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
THEORY COURSE
to 20 MARKS
Paper Review 05
MAXIMUM MARKS FOR THE THEORY 50 MARKS 50 MARKS
Self-Study/Experience Learning:
Research Paper/ Poster Presentation on following
1. Case studies: Advanced electronics materials and applications.

2. Simulation of electrical, optical, magnetic, thermal, mechanical properties for advanced functional
materials devices.
3. Thin film devices, circuits and system (a field-effect transistor-based CNT, Nanowire FET,
Graphene, a laser diode, a quantum cascade laser).
4. Advanced manufacturing process for emerging materials and applications.
5. Quantum nanostructured Semiconductor Devices and applications.
39
Semester: IV
Microcontroller & Programming
(common to EI/ET/EC/EE)
Course Code : 21EI43 CIE : 150 Marks
Total Hours : 45L+30P SEE Duration : 3Hours + 3Hours
Unit-I 9 Hrs
Introduction to Processing units
Computer System, Processor, Block diagram, Processor logic unit, Control unit, Instruction format,
Assembly language, High level language, Embedded computing applications, Microcontroller,
Instruction set architectures (CISC, RISC), Harvard and Von Neumann, Floating and fixed point,
Introduction of controller families: 8-bit, 16-bit,32 bit, 64 bit
ARM Processor families, Cortex A, Cortex R and Cortex M, Thumb 2 instruction set
Unit – II 9 Hrs
Cortex M Architecture
Advantages of Cortex M CPUs, Programmer’s model: Operation modes & states, Registers, Special
Registers, APSR, Memory System, Low power modes, Instruction Set: Memory access instructions,
Arithmetic, Logical, Shift, Program flow control instructions, Programming examples, IDEs, ST-Link
debugger.
Unit –III 9 Hrs
Digital and Analog IO
ARM Cortex M4 MCUs, Memory organization, Reset & Clock Control, GPIO, Programming:
interfacing LEDs and Push buttons, Analog to digital converters (ADC), Successive Approximation
ADC, Programming and interfacing an analog sensor, Digital to Analog Converter(DAC), Programming
Unit –IV 9 Hrs
Serial Port
USART: Basics of serial communication(Synchronous, asynchronous), Framing, Sampling, Baud rate
generation, Programming USART for character transmission, Serial Peripheral Interface, Programming
SPI for data transfer
Unit –V 9 Hrs
Interrupts:
Types of interrupts, Nested vector interrupt controller (NVIC) in Cortex-M cores, Interrupt vectors,
Priorities, Programming interrupts, Timers, Controlling the operation, Programming with timers, Pulse
width modulators, Programming modulators to generate PWM wave for given specifications
CO1: Comprehend the architecture of processing units used to build computers and embedded systems.
CO2: Identify and explain key features of Arm architectures, processors, and more specifically the
Arm Cortex-M4.
CO3: Apply the knowledge of microcontroller for programming peripherals using registers and APIs
generated using auto code generators.
CO4: Engage in assignment to understand, formulate, design and analyse problems to be realized on
embedded processors.
40
Reference Books
1. The Definitive Guide to the ARM Cortex-M3& M4 Processors, Joseph Yiu, 3rd Edition, Newnes
(Elsevier), 2014, ISBN:978-93-5107-175-4
2. STM32 Arm Programming for Embedded Systems, Shujen Chen, Eshragh Ghaemi, Muhammad Ali
Mazidi, Microdigitaled, ISBN: 978-0997925944
3. Reference manuals: STM32F411, STMcubeMX, SPI
4. White Paper: Cortex-M for Beginners - An overview of the Arm Cortex-M processor family and
comparison
Practical: Programming in ARM Assembly using Keil
1. Data Transfer Programs: Block Moves & Exchange (With & Without Overlap) with &without
String Instructions.
2. Arithmetic Operations: Addition, Multiplication & Division on 32-Bit Data.
3. Search for a Key in an Array of Elements using Linear Search, Binary Search.
Programming in Keil using embedded C in STMCubeMX
1. Program digital IOs control LEDs, seven segment interface, push buttons.
2. Program digital IOs to control stepper and motor drivers for given specifications.
3. Program ADC and show analog to digital conversion. Display digital value on suitable interface.
4. Program ADC and show interfacing of analog sensor for given specifications.
5. Program USART and serial data transfer.
6. Program SPI and show the configuration and data transfer between SPI slave device and master
7. Program to configure NVIC and writing interrupt service routines.
PART B
1. Program SPI and show the configuration and data transfer between SPI slave device and master.
2. Program ADC and show interfacing of analog sensor for given specifications.
3. Data transfer in polling, interrupt and DMA based modes.
4. Real time Audio applications: Flanging effect
41
CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
THEORY COURSE
40 MARKS
Application development using STMCubeMx 20
Model based design 10
Survey on advanced CPUs/ Supercomputers/
10
Multicores/ SoC/ NoC
100
MARKS
PRACTICALS 50 50
42
Semester: IV
POWER ELECTRONICS
Course Code : 21EE44 CIE : 100+50 Marks
Credits: L:T:P : 2:1:1 SEE : 100+50 Marks
Total Hours : 28L+28T+28P SEE Duration : 3.00 +3.00 Hours
Unit-I 06 Hrs
POWER SEMICONDUCTOR DEVICES:
Introduction to power electronics, Types of Power Electronic Circuits. Control Characteristics of Power
devices, Study of switching devices (Construction and working) - SCR, MOSFET and IGBT. Static and
dynamic characteristics of SCR, MOSFET and IGBT, Turn on methods of SCR using R, RC and UJT
triggering, Microprocessor based triggering of SCR. Device ratings and protection using snubber
circuits, Parallel operation of MOSFETs
Unit – II 06 Hrs
PHASE CONTROLLED CONVERTER CIRCUITS:
Analysis and performance parameters evaluation of single-phase semi converter with and without
freewheeling diode and full converter, with pure R, RL and highly inductive load. Analysis and
performance parameters evaluation of three phase full converter with highly inductive load and RL load.
Unit –III 05 Hrs
CHOPPERS:
Analysis and performance evaluation of step down and step-up chopper with R & RL load. Classification
and analysis of choppers (single, two and four quadrant).
Operation of Buck, Boost, Buck-Boost converters.
Unit –IV 06 Hrs
INVERTERS:
Voltage source and Current source inverter. Analysis and performance parameters evaluation of single
phase VSI and three phase VSI with 180 degree and 120-degree conduction. PWM control of inverters-
single pulse width, multiple pules-width, sinusoidal pulse width and phase-displacement control
Unit –V 05 Hrs
AC VOLTAGE CONTROLLER AND APPLICATIONS OF POWER ELECTRONICS:
AC VOLTAGE CONTROLLER:
Principle and analysis of on-off control and phase control of Single-phase semi and Bi-directional AC
voltage controllers with R and RL load,
APPLICATIONS OF POWER ELECTRONICS
Power Electronics application in Electric vehicle (operation of DC-DC Bi directional converter) and
micro grid (Multilevel inverter). Principle of operation of UPS (online and offline) and Switch Mode
power Supply system (Block diagram Approach).
CO 1 Comprehend the construction and working of Power semiconductor devices
CO 2 Analyze the basic concepts of conversion of Electrical energy
CO 3 Evaluate the performance parameters of power electronic converters
CO 4 Design of Power Electronic Converters to UPS, SMPS
43
1. Static characteristics of SCR, MOSFET and IGBT.
2. UJT and digital firing circuit for a single phase controlled rectifier.
3. Performance parameter Evaluation of Single phase semi and fully controlled converter with R and
R-L loads (conventional & Simulation).
4. Performance parameter Evaluation Three phase fully controlled converter using R load (conventional
& Simulation).
5. Performance parameter Evaluation of Single phase bridge voltage sources inverter connected to R
and RL load.( conventional & Simulation).
6. Speed control of a separately excited DC motor using a MOSFET / IGBT chopper.
7. Speed control of single phase induction motor using single phase AC voltage controller.
8. V/f method speed control of induction motor.
PART B
\
8. Modelling and simulation of power converter circuits using Matlab (Simulink)/PSIM Software.
9. Power electronics Simulation using Virtual labs.
10. Open ended experiments Based on Applications of power converters.
11. Microcontroller based firing for SCR/MOSFET using Embedded software.
PART B
\
8. Modelling and simulation of power converter circuits using Matlab (Simulink)/PSIM Software.
9. Power electronics Simulation using Virtual labs.
10. Open ended experiments Based on Applications of power converters.
11. Microcontroller based firing for SCR/MOSFET using Embedded software.
Reference Books
Power Electronics, M.D. singh and K.B. Khanchandani, 2nd Edition, 2017, TMH,, ISBN-13:
1. 978-0-07-058389-4
Power Electronics, Circuit Devices and Applications M. H. Rashid, 4th Edition, 2013 Pearson
2.
Education India, ISBN-13: 978-0133125900
Power Electronics, P.S. Bimbhra, 2nd Edition.1998, Khanna Publishers, ISBN: 978-0-07-
3.
154353-8,
Power Electronics Essentials & Applications, L Umanand, 1st Editon, 2013, Willey Publisher,
4.
ISBN-978-81-265-1945-3
44
CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
THEORY COURSE
Test – I Each test will be conducted for
50 Marks adding upto 100
Test – II marks. Final test marks will be
reduced to 40 MARKS
Applications of Power Electronics Converters 20
100
MARKS
PRACTICALS 50 50
45
Semester: IV
Principles of Electromagnetics
(Common with ET, EE)
Course Code : 21TE45 CIE : 100 Marks
Total Hours : 45L+15T SEE Duration : 3 Hours
Unit-I 09 Hrs
Electrostatics 1:
Coulomb’s law, illustrative examples, Electric Field Intensity, Applications (field due to Line charge
distribution, Surface charge distribution- sheet, Circular ring, disk), Illustrative examples.
Flux, flux density Gauss' Law, Divergence Theorem (qualitative treatment), Application of Gauss's Law
(Field due to Continuous Volume Charge, Line Charge, Sheet Charge, Metal sphere, spherical shell)
Illustrative examples.
Unit – II 09 Hrs
Electrostatics 2:
Work done to move a point charge, Electric potential, Relation between E and V, Applications (field and
potential due to Line charge distribution, Surface charge distribution- sheet, Circular ring), Energy Density in
an Electric Field, Illustrative examples.
Boundary Conditions (dielectric-dielectric, dielectric-conductor), Poisson's and Laplace's Equations,
Applications Laplace’s and Poisson's Equations (different capacitors, Coaxial conductors), Illustrative
examples.
Unit –III 09 Hrs
Magnetostatic Fields 1:
Biot -Savart Law, Ampere’s Circuital Law, Applications of Ampere's Law, Maxwell's Equation, Magnetic
Flux Density, Maxwell's Equations for Static EM Fields.
Magnetic Forces and Materials: Forces due to Magnetic Fields, Magnetization in Materials, Classification
of Magnetic Materials.
Unit –IV 09 Hrs
Magnetostatic Fields 2:
Magnetic Boundary Conditions, Inductors, and Inductances, Solanoid, Toroid Inductors
Maxwell's Equations: Introduction, Faraday's Law, Transformer and Motional EMFs, Displacement Current,
Maxwell's Equations in Final Forms, Time-Varying Potentials, Time-Harmonic Fields, Illustrative examples
Unit –V 09 Hrs
Electromagnetic Waves: Introduction, Waves in General, Wave Propagation in Lossy Dielectrics, Plane
Waves in Lossless Dielectrics, Plane Waves in Free Space, Plane Waves in Good Conductors, Power and
the Poynting Vector. Reflection of plane waves, Normal Incidence, Application Note-Microwaves
46
CO1 Understand the basic concepts of electric fields, magnetic fields and electromagnetic waves.
CO2 Apply the basic concepts to solve complex problems in electric fields, magnetic fields and
electromagnetic waves
CO3 Analyze different charge and current configurations to derive the electromagnetic field equations
CO4 Design simple solutions for applications in electric and electronic circuits, electrical machines and
communication systems.
Reference Books
1 Principles of Electromagnetics, Matthew N O Sadiku, 4th Edition, 2007, Oxford University Press, ISBN:
9780198062295, 019806229X
2 Electromagnetic Field Theory, S Salivahanan 2nd Edition, 2018, Mc Graw Hill India,
ISBN:978-9353162573
3 Field and Wave Electromagnetics, David K. Cheng, 2nd Edition, 1989, Pearson Education Asia, Indian
Reprint 2001, ISBN: 9789332535022/9788177585766, 8177585762
4 Engineering Electromagnetics, William H. Hayt Jr. and John A. Buck, 6th Edition, 2001, Tata McGraw
Hill, ISBN-13: 978-0071202299

CIE SEE
WEIGHTAGE 50% 50%
QUIZZES
THEORY COURSE
Marks adding up to 100 marks.
40 MARKS
Applications of Electromagnetics 20
100
MARKS
Semester: IV
47
ANALOG CIRCUITS
(Professional Core Elective Group A)
Course Code : 21EE4A1 CIE : 50 Marks
Unit-I 10 Hrs
Introduction, Poles and Zeros, Ideal Opamp, Applications of OPAMP – Inverting and Non Inverting
Amplifier
Applications of Op Amp (Contd) – Summer Amplifier, Difference Amplifier, Integrator, Differentiator
Unit – II 10 Hrs
Non Idealities in an Op Amp – Finite Gain, Bandwidth, Slew Rate, Saturation, Offset Voltage, Bias
Current
Bode Plots, Frequency Response, Millers Theorem, Feedback, Effect of Feedback Stability, Nyquist
Plot, Phase Margin, Gain margin, Frequency Compensation
Unit –III 10 Hrs
Filter Design, Butterworth and Chebyshev Filters Non Linear Applications of Filters – Limiters,
Oscillators, Multivibrators, Diodes, Basic BJT Circuits
CO 1 Understand the basic components and Methodologies for design of Analog Circuits
CO 2 Apply the concepts of Op-Amp based circuits for non-linear systems
CO 3 Analyse and evaluate the performance of Analog circuits
CO 4 Develop BJT based analog circuits
Reference Books
Microelectronic Circuits : Theory and Applications, sedra and smith , 7th Edition, 2017, ISBN: 978-
1. 0199476299
Fundamentals of Electric Circuits by Alexander and Sadiku, 7th Edition, 2013, ISBN: 978-
2.
1259098598
3. Analog Integrated Circuit Design, by Johns and Martin,, 2nd Edition, 2013, ISBN: 978-0470770108
48
Semester: IV
PROGRAMMING, DATA STRUCTURES AND ALGORITHMS USING PYTHON
Unit-I 10 Hrs
Informal introduction to programming, algorithms and data structures via gcd, Downloading and
installing Python, gcd in Python: variables, operations, control flow - assignments, condition-als, loops,
functions.
Python: types, expressions, strings, lists, tuples, Python memory model: names, mutable and immutable
values, List operations: slices etc, Binary search, Inductive function definitions: numerical and structural
induction; Elementary inductive sorting: selection and insertion sort, In-place sorting.
Unit – II 10 Hrs
Basic algorithmic analysis: input size, asymptotic, complexity, notation, Arrays vs lists; Merge sort,
Quicksort, Stable sorting.
Dictionaries, More on Python functions: optional arguments, default values, Passing functions as
Arguments; Higher order functions on lists: map, lter, list comprehension.
Exception handling, Basic input/output, Handling files, String processing.
Unit –III 10 Hrs
Backtracking: N Queens, recording all solutions, Scope in Python: local, global, nonlocal names; Nested
functions, Data structures: stack, queue, Heaps.
Abstract datatypes, Classes and objects in Python, "Linked" lists: find, insert, delete; Binary search trees:
find, insert, delete, Height-balanced binary search trees.
Efficient evaluation of recursive definitions: memorization, Dynamic programming: examples; Other
programming languages: C and manual memory management; Other programming paradigms:
functional programming.
CO 1 Understand the basic concepts of Python programming and Data Structures
CO 2 Apply data structures and algorithms to solve complex problems.
CO 3 Analyse performance of various algorithms
CO 4 To design and implement various data structures and algorithms
Reference Books
Data structures and algorithms in python by Michael T. Goodrich, 1st Edition, 2013, ISBN: 978-
1. 1118290279
Data Structures and Algorithms with Python by Kent D. Lee and Steve Hubbard., 2015, ISBN: 978-
2.
3319130712
49
Semester: IV
BUSINESS ANALYTICS & TEXT MINING MODELING USING PYTHON
Unit-I 10 Hrs
Introductory overview of Text Mining: Data Mining vs. Text Mining, Text Characteristics,
Predictive Text Analytics, Text Mining Problems, Prediction & Evaluation, Python as a Data Science
Platform.
Python Basics: Python Programming Features, Commands for common tasks and control, Essential
Python programming concepts & language mechanics, Built in Capabilities of Python, Data structures:
tuples, lists, dicts, and sets.
Built in Capabilities of Python: Functions, Namespaces, Scope, Local functions, Writing more
reusable generic functions.
Unit – II 10 Hrs
Built in Capabilities of Python: Generators, Errors & Exception Handling, Working with files
Numerical Python, N-dimensional array objects.
Numerical Python: Vectorized array operations, File management using arrays, Linear algebra
operations, Pseudo-random number generation, Random walks, Python pandas, Data structures: Series
and DataFrame.
Python pandas: Applying functions and methods, Descriptive Statistics, Correlation and Covariance,
Working with Data in Python, Working with CSV, EXCEL files, Working with Web APIs.
Unit –III 10 Hrs
Working with Data in Python: Filtering out missing data, Filling in the missing data, removing
duplicates, Perform transformations based on mappings, Binning continuous variables, Random
sampling and random reordering of rows, Dummy variables, String and text processing, Regular
expressions, Data Visualization using Python, Matplotlib Library, Plots & Subplots.
Text mining modeling using NLTK: Text Corpus, Sentence and Word Tokenization, Removing
special Characters, Expanding contractions, Removing Stopwords, Correcting words: repeated
characters, Stemming & lemmatization, Part of Speech Tagging, Feature Extraction, Bag of words
model, TF-IDF model, Text classification problem, Building a classifier using support vector machine
CO 1 Understand the knowledge on use of text mining techniques for deriving business intelligence
CO 2 Apply the Python based software to build models based on real data sets
CO 3 Analyse and compare text mining based models
CO 4 Process the data using python based text mining techniques
Reference Books
Fundamentals of Predictive Text Mining by Sholom M. Weiss, Nitin Indurkhya, & Tong Zhang,
1. 2010/2015, ISBN: 978-1447167495
Python for Data Analysis: Data Wrangling with Pandas, NumPy, and IPython by Wes McKinney,
2.
2017, ISBN: 978-1491957660
Text Analytics with Python: A Practical Real-World Approach to Gaining Actionable Insights from
3.
Your Data by Dipanjan Sarkar 2016, ISBN: 978-1484223871
50
Semester: IV
INTRODUCTION TO OPERATING SYSTEMS
Unit-I 10 Hrs
Background and Basics: Brief history, Computer System review, Basic OSs, Computer System and
Operating System Structures.
Memory Management: Address Binding, Logical versus Physical Address Space, Swapping, Paging
and Virtual Memory, Thrashing.
Processes: Definition, Process States, 5 state model, Process structure, Operations on Processes,
Threads.
Unit – II 10 Hrs
CPU Scheduling: I/O burst cycle, Context Switching, Scheduling: Short and Long Term, Scheduling
Criteria, Algorithms: First Come First Serve, Shortest Job First, Priority Scheduling, Round Robin.
Process Synchronization: Critical Section Problem, Two Process Solutions, Synchronization
Hardware, Semaphores, Deadlocks and Starvation, Classic Synchronization Problems.
Unit –III 10 Hrs
Deadlocks: System Model, Necessary Conditions for a deadlock: Mutual Exclusion, Hold and Wait,
No Preemption, Circular wait; Resource Allocation Graphs, Handling Deadlocks: Prevention,
Avoidance, Bankers Algorithm.
Operating System Security: Goals of Security System, Types of Threats to Operating System,
Operating System Security Procedures.
CO 1 Understand the basic components of an operating system.
CO 2 Apply the knowledge of virtualising CPU and memory in an operating systems
CO 3 Analyse file system organisation of data in the hard disk
CO 4 Develop various scheduling and swapping policies
Reference Books
Operating System Concepts, 8th edition, by Adraham Silberschatz, Pert B. Galvin, and Greg Gagne,
1. Wiley-India edition, 2017, ISBN: 978-0470128725
Modern Operating Systems, 3rd edition, by Andrew S. Tanenbaum, PHI Learning Private Limited,
2.
New Delhi, 2009, ISBN: 978-8120339040
51
Semester: IV
MULTI-CORE COMPUTER ARCHITECTURE - STORAGE AND INTERCONNECTS
Unit-I 10 Hrs
Fundamentals of instruction pipeline for superscalar processor design; Memory hierarchy design, cache
memory - fundamentals and basic optimisations; Cache memory – advanced optimisations,
performance improvement technqiues.
Unit – II 10 Hrs
Gem5 simulator – build and run, address translations using TLB and page table; DRAM – organisation,
access techniques, scheduling algorithms and signal systems.
Unit –III 10 Hrs
Introduction – Tiled Chip Multicore Processors (TCMP), Network on Chips (NoC); NoC router –
architecture, design, routing algorithms and flow control techniques; Advanced topics in NoC and
storage – compression, prefetching, QoS.
CO 1 Understand the fundamentals of multi-core computer architectures.
CO 2 Apply inter-core communication framework for processors.
CO 3 Analyse memory-subsystems and interconnects of Tiled Chip Multi-Core Processors
CO 4 Develop advanced superscalar processors for applications in data science.
Reference Books
Computer Architecture - A Quantitative Approach-5e John L. Hennessy, David A. Patterson Morgan
1. Kaufman., 6th Edition, 2017, ISBN: 978-0128119051
Memory System - Cache, DRAM and Disk Bruce Jacob, Spencer W. Ng, David T. Wang Morgan
2.
Kaufman, 2007, ISBN: 978-0123797513
Principles and Practices of Interconnection Networks William J. Dally, Brian P. Towles Elsevier., 1st
3.
Edition, 2004, ISBN: 978-0122007514
52
Semester IV
Course Title: DESIGN THINKING LAB
(Practice)
Course Code : 21EE46 CIE Marks : 50 Marks
Credits: L:T:P : 0:0:2 SEE Marks : 50 Marks
Total Hours : 30 Hrs SEE Duration : 02 Hours
Course Learning Objectives: To enable the students to:
1. Knowledge Application: Acquire the ability to make links across different areas of knowledge and to
generate, develop and evaluate ideas and information so as to apply these skills to provide solutions of
societal concern
2. Communication: Acquire the skills to communicate effectively and to present ideas clearly and
coherently to a specific audience in both the written and oral forms.
3. Collaboration: Acquire collaborative skills through working in a team to achieve common goals.
4. Independent Learning: Learn on their own, reflect on their learning and take appropriate action to
improve it.
Guidelines for Design Thinking Lab:

1. The Design Thinking Lab (DTL) is to be carried out by a team of two-three students.
2. Each student in a team must contribute equally in the tasks mentioned below.
3. Each group has to select a theme that will provide solutions to the challenges of societal concern.
Normally three to four themes would be identified by the by the department
4. Each group should follow the stages of Empathy, Design, Ideate, prototype and Test for completion
of DTL.
5. After every stage of DTL, the committee constituted by the department along with the coordinators
would evaluate for CIE. The committee shall consist of respective coordinator & two senior faculty
members as examiners. The evaluation will be done for each student separately.
6. The team should prepare a Digital Poster and a report should be submitted after incorporation of any
modifications suggested by the evaluation committee.
The Design Thinking lab tasks would involve:
1. Carry out the detailed questionnaire to arrive at the problem of the selected theme. The empathy report
shall be prepared based on the response of the stake holders.
2. For the problem identified, the team needs to give solution through thinking out of the box innovatively
to complete the ideation stage of DTL
3. Once the idea of the solution is ready, detailed design has to be formulated in the Design stage
considering the practical feasibility.
4. If the Design of the problem is approved, the team should implement the design and come out with
prototype of the system.
5. Conduct thorough testing of all the modules in the prototype developed and carry out integrated
testing.
6. Demonstrate the functioning of the prototype along with presentations of the same.
7. Prepare a Digital poster indicating all the stages of DTL separately. A Detailed project report also
should be submitted covering the difficulties and challenges faced in each stage of DTL.
53
8. Methods of testing and validation should be clearly defined both in the Digital poster as well as the
report.
The students are required to submit the Poster and the report in the prescribed format provided by the
department.
CO1: Interpreting and implementing the empathy, ideate and design should be implemented by applying
the concepts learnt.
CO2: The course will facilitate effective participation by the student in team work and development of
communication and presentation skills essential for being part of any of the domains in his / her
future career.
CO3: Appling project life cycle effectively to develop an efficient prototype.
CO4: Produce students who would be equipped to pursue higher studies in a specialized area or carry out
research work in an industrial environment.
ASSESSMENT AND EVALUATION PATTERN FOR CIE

Phase Activity Weightage
I Empathy, Ideate evaluation 10 M
II Design evaluation 15 M
Prototype evaluation, Digital Poster presentation and report
III 25 M
submission
ASSESSMENT AND EVALUATION PATTERN FOR CIE

S.No. Evaluation Component Marks
1. Written presentation of synopsis: Write up 5M
2. Presentation/Demonstration of the project 15 M
3. Demonstration of the project 20 M
4. Viva 5M
5. Report 5M
Total 50 M
54
Semester: IV
Bridge Course: C Programming
(Theory)
(Common to all Branches)
Course Code : 21DCS47 CIE : 50 Marks
Credits: L:T:P : 2:0:0 SEE : ---
Unit-I 08 Hrs
Introduction-Perspectives
Business Domains: Programming.
Applications: Design games, GUI, DBMS, Embedded Systems, Compilers and Operating Systems.
Introduction to Computer Concepts: Introduction to Computer Hardware, Software and its Types.
Introduction to C programming: Programming paradigms, Basic structure of C program, Process of
compiling and running a C program, Features of C language, Character set, C tokens, Keywords and
Identifiers, Constants, Variables, Data types, Pre-processor directives. Handling Input and Output
operations and operators: Formatted input/output functions, Unformatted input/output functions with
programming examples using all functions.
Unit – II 10 Hrs
Operators: Introduction to operator set, Arithmetic operators, Relational operators, Logical Operators,
Assignment operators, Increment and Decrement operators, Conditional operators, Bit-wise operators,
Special operators. Expressions: Arithmetic expressions, evaluation of expressions, Precedence of
arithmetic operators, Type conversion in expressions, Operator precedence and associativity.
Decision Making and Branching: Decision making with ‘if’ statement, Simple ‘if’ statement, the
‘if…else’ statement, nesting of ‘if…else’ statements, The ‘else if’ ladder, The ‘switch’ statement, The ‘?:’
operator, The ‘goto’ statement.
Unit –III 12 Hrs
Programming Constructs: Decision making and looping: The ‘for’,’while’,’do-while’ statements with
examples, Jumps in loops. Arrays: Introduction to Arrays, Types of arrays, Declaration arrays, Initializing
dimensional arrays (One Dimensional and Multidimensional Array) with examples.
String Operations: Introduction, Declaration and Initializing String Variables using arrays, String
operations and functions with examples. Functions: Need for Functions, Types of functions (User Defined
and Built –In), working with functions, Definition, declaration and its scope. Pointers: Introduction,
Benefits of using pointers, Declaration and Initialization of pointers, Obtaining a value of a variable.
CO 1 Apply logical skills to solve the engineering problems using C programming constructs.
CO 2 Evaluate the appropriate method/data structure required in C programming to develop solutions
by investigating the problem.
CO 3 Design a sustainable solution using C programming with societal and environmental concern by
engaging in lifelong learning for emerging technology
CO 4 Demonstrate programming skills to solve inter-disciplinary problems using modern tools
effectively by exhibiting team work through oral presentation and written reports.
Reference Books
Programming in C, P. Dey, M. Ghosh, 2011, 2nd Edition, Oxford University press, ISBN (13):
1.
9780198065289.
55
2. Algorithmic Problem Solving, Roland Backhouse, 2011, Wiley, ISBN: 978-0-470-68453-5
The C Programming Language, Kernighan B.W and Dennis M. Ritchie, 2015, 2nd Edition, Prentice
3.
Hall, ISBN (13): 9780131103627.
Turbo C: The Complete Reference, H. Schildt, 2000, 4th Edition, Mcgraw Hill Education, ISBN-13:
4.
9780070411838.
5. Rasberry pi: https://www.raspberrypi.org/documentation/
6. Nvidia: https://www.nvidia.com/en-us/
7. Ardunio: https://www.arduino.cc/en/Tutorial/BuiltInExamples
8. Scratch software: https://scratch.mit.edu/
PRACTICE PROGRAMS
Implement the following programs using cc/gcc compiler
1. Develop a C program to compute the roots of the equation ax2 + bx + c = 0.
2. Develop a C program that reads N integer numbers and arrange them in ascending or descending order
using selection sort and bubble sort technique.
3. Develop a C program for Matrix multiplication.
4. Develop a C program to search an element using Binary search and linear search techniques.
5. Using functions develop a C program to perform the following tasks by parameter passing to read a
string from the user and print appropriate message for palindrome or not palindrome.
6. Develop a C program to compute average marks of ‘n’ students (Name, Roll_No, Test Marks) and
search a particular record based on ‘Roll_No’.
7. Develop a C program using pointers to function to find given two strings are equal or not.
8. Develop a C program using recursion, to determine GCD , LCM of two numbers and to perform
binary to decimal conversion.

CIE SEE
WEIGHTAGE 100% ---
QUIZZES
THEORY COURSE
to 30 MARKS
TOTAL MARKS FOR THE COURSE 50 ---
56
Semester: IV
Universal Human Values 2
(Theory & Practical)
Course Code : 21HSU48 CIE : 50 Marks
Total Hours : 28L+0T+14P SEE Duration : 2.00 Hours
Unit-I 05 Hrs
Course Introduction - Need, Basic Guidelines, Content and Process for Value Education: Purpose
and motivation for the course, recapitulation from Universal Human Values-I, Self-Exploration–what
is it? - Its content and process; ‘Natural Acceptance’ and Experiential Validation- as the process for
self-exploration, Continuous Happiness and Prosperity- A look at basic Human Aspirations, Right
understanding, Relationship and Physical Facility- the basic requirements for fulfilment of aspirations
of every human being with their correct priority, Understanding Happiness and Prosperity correctly-
A critical appraisal of the current scenario, Method to fulfil the above human aspirations:
understanding and living in harmony at various levels.
Include practice sessions to discuss natural acceptance in human being as the innate acceptance for
living with responsibility (living in relationship, harmony and co-existence) rather than as arbitrariness
in choice based on liking-disliking.
Unit – II 06 Hrs
Understanding Harmony in the Human Being - Harmony in Myself!: Understanding human being
as a co-existence of the sentient ‘I’ and the material ‘Body’, Understanding the needs of Self (‘I’) and
‘Body’ - happiness and physical facility, Understanding the Body as an instrument of ‘I’ (I being the
doer, seer and enjoyer), Understanding the characteristics and activities of ‘I’ and harmony in ‘I’,
Understanding the harmony of I with the Body: Sanyam and Health; correct appraisal of Physical
needs, meaning of Prosperity in detail, Programs to ensure Sanyam and Health.
Include practice sessions to discuss the role others have played in making material goods available to
me. Identifying from one’s own life. Differentiate between prosperity and accumulation. Discuss
program for ensuring health vs dealing with disease
Unit –III 06 Hrs
Understanding Harmony in the Family and Society- Harmony in Human Human Relationship:
Understanding values in human-human relationship; meaning of Justice (nine universal values in
relationships) and program for its fulfilment to ensure mutual happiness; Trust and Respect as the
foundational values of relationship, Understanding the meaning of Trust; Difference between intention
and competence, Understanding the meaning of Respect, Difference between respect and
differentiation; the other salient values in relationship, Understanding the harmony in the society
(society being an extension of family): Resolution, Prosperity, fearlessness (trust) and co-existence as
comprehensive Human Goals, Visualizing a universal harmonious order in society- Undivided
Society, Universal Order- from family to world family.
Include practice sessions to reflect on relationships in family, hostel and institute as extended family,
real life examples, teacher-student relationship, goal of education etc. Gratitude as a universal value
in relationships. Discuss with scenarios. Elicit examples from students’ lives
57
Unit –IV 05 Hrs
Understanding Harmony in the Nature and Existence - Whole existence as Coexistence:
Understanding the harmony in the Nature, Interconnectedness and mutual fulfilment among the four
orders of nature recyclability and self-regulation in nature, Understanding Existence as Co-existence of
mutually interacting units in all pervasive space, Holistic perception of harmony at all levels of existence.
Include practice sessions to discuss human being as cause of imbalance in nature (film “Home” can be
used), pollution, depletion of resources and role of technology etc.
Unit –V 06 Hrs
Implications of the above Holistic Understanding of Harmony on Professional Ethics, Natural
acceptance of human values, Definitiveness of Ethical Human Conduct, Basis for Humanistic Education,
Humanistic Constitution and Humanistic Universal Order, Competence in professional ethics: a. Ability
to utilize the professional competence for augmenting universal human order b. Ability to identify the
scope and characteristics of people friendly and eco-friendly production systems, c. Ability to identify
and develop appropriate technologies and management patterns for above production systems, Case
studies of typical holistic technologies, management models and production systems, Strategy for
transition from the present state to Universal Human Order: a. At the level of individual: as socially and
ecologically responsible engineers, technologists and managers b. At the level of society: as mutually
enriching institutions and organizations, Sum up.
Include practice Exercises and Case Studies will be taken up in Practice (tutorial) Sessions eg. To discuss
the conduct as an engineer or scientist etc.
Course Outcomes: After completion of the course the students will be able to
CO1 By the end of the course, students are expected to become more aware of themselves, and their
surroundings (family, society, nature); they would become more responsible in life, and in
handling problems with sustainable solutions,
CO2 While keeping human relationships and human nature in mind. They would have better critical
ability.
CO3 They would also become sensitive to their commitment towards what they have understood
(human values, human relationship and human society).
CO4 It is hoped that they would be able to apply what they have learnt to their own self in different
day-to-day settings in real life, at least a beginning would be made in this direction
Reference Books
1 Jeevan Vidya: Ek Parichaya, A Nagaraj, Jeevan Vidya Prakashan, Amarkantak, 1999.
2 Human Values, A.N. Tripathi, New Age Intl. Publishers, New Delhi, 2004
3 The Story of Stuff (Book).
4 The Story of My Experiments with Truth - by Mohandas Karamchand Gandhi
5 Small is Beautiful - E. F Schumacher.
6 Slow is Beautiful - Cecile Andrews.
58
This is a compulsory credit course. The assessment is to provide a fair state of development of the
student, so participation in classroom discussions, self-assessment, peer assessment etc. will be used in
evaluation. Example: Assessment by faculty mentor: 10 marks Self-assessment: 10 marks Assessment
by peers: 10 marks Socially relevant project/Group Activities/Assignments: 20 marks Semester End
Examination: 50 marks. The overall pass percentage is 40%. In case the student fails, he/she must repeat
the course.
59
Curriculum Design Process
60
Academic Planning and Implementation
Process for Course Outcome Attainment

61
62
Final CO Attainment Process
63
Program Outcome Attainment Process
64
PROGRAM OUTCOMES (POs)
1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals,
and an engineering specialisation for the solution of complex engineering problems.
2. Problem analysis: Identify, formulate, research literature, and analyse complex engineering problems
reaching substantiated conclusions using first principles of mathematics, natural sciences, and
engineering sciences.
3. Design/development of solutions: Design solutions for complex engineering problems and design
system components or processes that meet the specified needs with appropriate consideration for
public health and safety, and cultural, societal, and environmental considerations.
4. Conduct investigations of complex problems: Use research-based knowledge and research methods
including design of experiments, analysis and interpretation of data, and synthesis of the information
to provide valid conclusions.
5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern
engineering and IT tools, including prediction and modelling to complex engineering activities, with
an understanding of the limitations.
6. The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal,
health, safety, legal, and cultural issues and the consequent responsibilities relevant to the
professional engineering practice.
7. Environment and sustainability: Understand the impact of the professional engineering solutions in
societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable
development.
8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of
the engineering practice.
9. Individual and team work: Function effectively as an individual, and as a member or leader in
diverse teams, and in multidisciplinary settings.
10. Communication: Communicate effectively on complex engineering activities with the engineering
community and with the society at large, such as, being able to comprehend and write effective
reports and design documentation, make effective presentations, and give and receive clear
instructions.
11. Project management and finance: Demonstrate knowledge and understanding of the engineering and
management principles and apply these to one’s own work, as a member and leader in a team, to
manage projects and in multidisciplinary environments.
12. Life-long learning: Recognise the need for, and have the preparation and ability to engage in
independent and life-long learning in the broadest context of technological change.
65

8 Ee

Uploaded by

Copyright:

Available Formats

8 Ee

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

8 Ee

Uploaded by

Copyright:

Available Formats

Scheme & Syllabus of

III & IV Semesters (2021 Scheme)

BACHELOR OF ENGINEERING (B.E)

(ACADEMIC YEAR 2022-2023)

PROGRAM EDUCATIONAL OBJECTIVES (PEOs)

PROGRAM SPECIFIC OUTCOMES (PEOs)

Sl. No. Abbreviation Meaning

Analysis and Design of Digital Circuits

6 21EE36 Measurement and Transducers 2 0 0 2 EE Theory 1 50 **** 2 50 ****

ABILITY ENHANCEMENT COURSE

Principles of Electromagnetic 3 1 0 4 ET Theory 1.5 100 **** 3 100 ****

21HSU48 Universal Human Values 2 0 0 2 HSS Theory 1 50 **** 2 50 ****

GROUP A: PROFESSIONAL ELECTIVES (MOOC COURSES)

ASSESSMENT AND EVALUATION PATTERN

Experiential learning topics

Test – I Each test will be conducted for 25

Course Code : 21EE35 CIE : 100 Marks

ASSESSMENT AND EVALUATION PATTERN

Course Code : 21EE36 CIE : 50 Marks

ASSESSMENT AND EVALUATION PATTERN

Continuous Internal Evaluation (CIE); Theory (50 Marks)

ASSESSMENT AND EVALUATION PATTERN

Course Outcomes: Cadets will be able to: -

Drill Skill Test 20 *****

Weapon Training 10 *****

Introduction of Physical Education and Sports

ASSESSMENT AND EVALUATION PATTERN

ASSESSMENT AND EVALUATION PATTERN

ASSESSMENT AND EVALUATION PATTERN

TOTAL MARKS FOR THE COURSE 50 MARKS 50 MARKS

ASSESSMENT AND EVALUATION PATTERN

EXPERIENTIAL LEARNING 10 *****

A. Within the respective department at RVCE (Inhouse) Departments may offer

ASSESSMENT AND EVALUATION PATTERN

ASSESSMENT AND EVALUATION PATTERN

Research Paper/ Poster Presentation on following

1. Case studies: Advanced electronics materials and applications.

Programming in Keil using embedded C in STMCubeMX

ASSESSMENT AND EVALUATION PATTERN

Guidelines for Design Thinking Lab:

ASSESSMENT AND EVALUATION PATTERN FOR CIE

ASSESSMENT AND EVALUATION PATTERN FOR CIE

ASSESSMENT AND EVALUATION PATTERN

Process for Course Outcome Attainment

You might also like

6 21EE36 Measurement and Transducers 2 0 0 2 EE Theory 1 50 2 50

Principles of Electromagnetic 3 1 0 4 ET Theory 1.5 100 3 100

21HSU48 Universal Human Values 2 0 0 2 HSS Theory 1 50 2 50