The document provides details of the design model, loads, and calculations for a glass railing system. It includes dead loads and wind loads applied to glass and steel members. Deflections and stresses are calculated for glass panels under combined loading and checked against allowable limits. Anchor bolts are designed to connect base plates to concrete with calculations shown for bolt capacity, shear and tension loads, and required base plate thickness.
The document provides details of the design model, loads, and calculations for a glass railing system. It includes dead loads and wind loads applied to glass and steel members. Deflections and stresses are calculated for glass panels under combined loading and checked against allowable limits. Anchor bolts are designed to connect base plates to concrete with calculations shown for bolt capacity, shear and tension loads, and required base plate thickness.
The document provides details of the design model, loads, and calculations for a glass railing system. It includes dead loads and wind loads applied to glass and steel members. Deflections and stresses are calculated for glass panels under combined loading and checked against allowable limits. Anchor bolts are designed to connect base plates to concrete with calculations shown for bolt capacity, shear and tension loads, and required base plate thickness.
The document provides details of the design model, loads, and calculations for a glass railing system. It includes dead loads and wind loads applied to glass and steel members. Deflections and stresses are calculated for glass panels under combined loading and checked against allowable limits. Anchor bolts are designed to connect base plates to concrete with calculations shown for bolt capacity, shear and tension loads, and required base plate thickness.
A. Input Data Anchor type and size: 4-M10 HILTI-HSL-3-G Or Eq. Effective embedment depth: 110.00 mm. Base material: Non cracked concrete Fc': 300 ksc. (cylinder)
Stainless steel base plate strength, Fy : 205.0 Mpa Allowable base plate strength,s: 0.75Fy: 153.75 Mpa Moment arm, d = 21.00 mm. Moment at base plate, M = T*d = 73500 N.mm Effective width of bending plane, be = D+2d : 43.00 mm. Require thickness, treq = (4M/bes)^0.5 = 6.67 mm. DESIGN GLASS PANEL DISPLACEMENT LOAD CASE : DL+WL.
Maximum Deflection; Δ max = 18.14 mm.
Allowable Deflection; Δ all = 1500/90 = 16.66 mm. or max 20.00mm.
HENCE Δ max < Δ all ……………….PASS
GLASS PANEL STRESS LOAD CASE : DL+WL
Glass Type: Tempered Glass
Panel Size: 1.50 m x 3.02 m.
Supporting Method: Two sides Pin supported
Thickness of Glass: 6 + 6 mm.
Refer to graphical result,
Maximum Stress; σmax. = 308 Ksc.
Allowable Stress; σall. = 643.74 Ksc. (refer to AS1288-06 T. B1 Ultimate limit state design stress@At edge)
