Betacam SP Uvw1800

Betacam SP
Betacam SP®
The Universal Choice
Soon after its introduction, the Betacam SP format quickly established itself as the preferred format for analog
component recording in the broadcast and production industry. The wide spread acceptance of this format has
been proven by the tremendous amount of Betacam® VTRs used for ENG (Electronic News Gathering), post
production and on-air transmission around the world.
Today the demand for component recording quality has greatly increased in both the industrial and professional
video markets. In response, Sony successfully launched the PYW series VTRs in 1991 introducing the benefits
of the Betacam SP format to these markets.
Now, to offer the superiority of this format to an even wider range of users, Sony introduces the UVW- 1800
and its companion models which form the UVWseriesVTRs.
The UVW- 1800 is an editing recorder/player equipped with a 9-pin (RS-422A) port through which the VTR
can be controlled from editing controllers for insert and assemble editing. A built-in TBC and TC
generator/reader are incorporated for sophisticated editing. A variety of inputs/outputs including Y/R-Y/B-Y
component, Y/C as well as composite are available. When controlled from editing controllers such as Sony’s
PVE-500 or BVE-2000, the U\W-1800 forms an excellent editing system.
The UVW- 1800 offers an easy and economical way to enter the Betacam SP format, offering superior
performance, versatility and reliability.
FEATURES
SUPERIOR AUDIO/VIDEO QUALITY

Superior Picture Quality of the Betacam SP Component Recording Format
The UVW series adopts the Betacam SP format, well- known for its superior picture quality thanks to the use
of a component recording scheme in which information on brightness (Y) is recorded on one track while
information on color (R-YIB-Y) is recorded on another track. This is accomplished by using the Sony CTDM
(Compressed Time Division Multiplex) system. The use of these two separate tracks enables the Betacam SP
component format to reproduce pictures with detailed chrominance and luminance information. This also
eliminates the cross color and cross luminance effects inherent in composite recording. This recording scheme
Page 1
Betacam SP
also results in the Betacam SP format’s superb multi-generation picture performance.
LongOperating Time
The UV\XT_1 800 accepts both L-size and S-size cassettes, offering operating times of over 90 minutes and
30 minutes respectively. Sony UVWT series Betacam SP video cassettes are the new recommended metal
tapes for use with the UVW series VTR.
High Quality Audio
The UVW-1 800 provides two longitudinal audio channels. Thanks to the high tape speed (118.6 mm/s) of the
format and the adoption of the proven DolbyTM C-type Noise Reduction System, the UVW- 1800 offers high
quality audio with a wide dynamic range even at high frequencies, minimum distortion and an excellent signal-
to-noise ratio.
• CTDM System of Betacam SP Format
FULL EDITING FUNCTION
When connected to RS—422A equipped editing controllers such as the PVE-500, the UVW-1800 functions as
an editing recorder for assemble or insert editing. Frame accurate editing is assured in both modes, thanks to the
sophisticated servo control and built-in time code generator/reader. In the insert mode of the UVW- 1800,
video, audio CH- 1, audio CH-2 and time code can be inserted independently or in any combination. In the
assemble mode, all of the prerecorded signals (video, audio, CTL, time code) are erased and replaced with new
signals.
Character Superimposition
The UVW-1 800 is provided with a built-in character generator which superimposes characters on the output
signal obtained at the Video Output (Super). This allows time code data (LTC, U-bit), CTL and VTR function
status to be shown on a monitor. Menu items can also be put on a display for system setup. In addition,
warning and error indications can also be displayed.
Page 2
Betacam SP
Initial Setup Menu for Convenient Operation

The UVW-1800 is provided with an initial setup menu system. The setup menu is programmed in the form of a
layer structure. By simply going through the menu using the subcontrol panel, users can easily initialize the
\‘TR. This setup menu allows
many detailed operational parameters to be preset. Once the menu is set, the UVW- 1800 will memorize the
options and retain them in memory even after the power is turned off.
High Speed Picture Sear
The UVW- 1800 offers high speed picture search which provides a recognizable picture at various speeds over
a range of up to 5 times normal speed in color and up to 16 times normal speed in monochrome in both
forward and reverse. In JOG mode, the tape movement precisely matches the rotation of the search dial in both
directions. These functions are available using the optional SVRM- 100 Remote Control Unit or with an
editing controller equipped with RS-422A capability.
Optional Remote Control Unit
With the optional SVRM-100 Remote Control Unit, fundamental controls such as JOG, SHUTTLE, playback,
record, fast forward and rewind can be controlled. (FREEZE, INDEX, ERASE and MARK functions of the
SVRM- 100 are not available for the UVW-1800.)
Warning Indication
A warning indicator would be displayed if a misconnection or misoperation occured.
VERSATILE SYSTEM FUNCTIONS
Built-in Time Base Corrector
The UVW- 1800 is equipped with a built-in TBC (Time Base Corrector), providing stable pictures without any
additional equipment. Advanced, high quality digital dropout compensation also ensures consistent picture
performance.
TBC Remote Control
Video parameters of the UVW- 1800’s output signal can be remotely controlled with Sony’s optional BVR-50
connected to the rear panel via a 15-pin cable.
Built-in Time Code Generator/Reader
The Betacam SP format has an independent time code track so that a longitudinal audio track does not have to
be sacrificed for time code. A time code generator and reader is built into the UVW- 1800. The time codes
conform to the SMPTE standard in which LTC (Longitudinal Time Code) and User-bits are provided. LTC is
used to identify the absolute address of a frame, while User-bits are reserved for operator’s use. Frame accurate
AJB roll editing is possible using the LTC. Time code generation can also be externally locked. Functions such
as DF/NDF, FREE-RUN IREC RUN, can be easily selected by the setup menu keys on the subcontrol panel.
VERSATILE SYSTEM INTERFACE
Remote Interface
• RS-422A serial interface (9-pin)
An RS-422A serial interface is provided for versatile editing system expansion and sophisticated system
control. The UVW- 1800 interfaces with other RS-422A equipped Sony machines such as the PVE-500
Editing Controller, PVW-2800 Betacam SP 2000 PRO Series VTR and the BVU-950 U-matic SP VTR.
Analog Interface
Page 3
Betacam SP
• YIR-YIB-Y Component Video Signal Input/Output

The UVW- 1800 provides Y/R-Y/B-Y component signal input and output through BNC connectors and a 12-
pin DUB connector. Using this component signal interface takes full advantage of the superb performance of
the Betacam SP format.
• Composite Video Signal Input/Output
In addition to the component connectors, the UVW-1800 is equipped with composite video signal
inputs/outputs.
• S-video Signal Input/Output
S-video input/output connectors are also provided so that other equipment with S-video connectors can easily
interface with the UVW- 1800.
EASY SERVICING & MAINTAINING

The UVW-1800 has built-in self-diagnostics for ease of servicing and maintenance, plus, this information can
be displayed on both the monitor and the VTR’s character display.
• Self-Diagnostics
Should an error be detected, an error message will be displayed which will identify the problem area. This way
down time will be minimized.
• Hours Meter
An hours meter is also provided to indicate elapsed time on time critical operations such as accumulated dmm
rotation time. It can be easily displayed with the push of a button.
COMPACT, LIGHTWEIGHT AND LOW POWER CONSUMPTION
The UVW-1800 has a compact, lightweight design and is engineered for low power consumption. The unit
weighs approximately 19 kg (41 lb 14 oz), is 4 units high (19-inch rack mountable with optional RMM-130)
and consumes only 85 W.
Page 4
Betacam SP
Page 5
Betacam SP
Page 6

Betacam SP Uvw1800

Uploaded by

Copyright:

Available Formats

Betacam SP Uvw1800

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Betacam SP Uvw1800

Uploaded by

Copyright:

Available Formats

Betacam SP

SUPERIOR AUDIO/VIDEO QUALITY

also results in the Betacam SP format’s superb multi-generation picture performance.

FULL EDITING FUNCTION

Initial Setup Menu for Convenient Operation

• YIR-YIB-Y Component Video Signal Input/Output

EASY SERVICING & MAINTAINING

You might also like