PUMPS

Alum�num Body Gear Pump

Max. Outlet
Displacement Max. Speed
Group Series Gear Type Pressure
(cm³/rev) ( bar ) (RPM)
Group-1 0.5P Spur 1.1 - 7.5 170 4000
0P1 Spur 1.2 - 8.1 250 4000
Group-2 1PA Spur 4.0 - 22.9 175 3500
Group-2 1PN Spur 4.0 - 28.1 250 4000
Group-2.5 1.5P Spur 16.7 - 56.1 250 3000
Group-2.5 1.5PN Spur 16 - 41 230 3000
Group-3 2P1 Spur 16.7 - 56.1 250 3000
Group-3 2PN Spur 23 - 63 250 3000
Group-3.5 3P1 Spur 47 - 116.7 250 2250
1PH Helical 8.2 - 28.1 250 4000
1PS Spur (Silent) 4.0 - 31.0 250 4000
1.5PH Helical 16.0 - 40.6 225 3000

Cast Iron Body Gear Pump

Max. Outlet
Displacement Max. Speed
Series Gear Type Pressure
(cm³/rev) ( bar ) (RPM)

1CP1 Spur 16 - 41 276 3000

1CP2 Spur 7 - 45.1 276 3000
1CP3 Spur 23 - 73 276 3000
QR4 Spur 16 - 60 250 3000
QR5 Spur 45 - 120 250 3000
QR6 Spur 100 - 220 250 2750
QS4 Helical 16 - 40.6 250 3000
QS5 Helical 43.5 - 82.2 250 3000
QS6 Helical 80.3 - 149.9 250 2750
QS7 Helical 149.9 - 239.8 250 2400
QX5 Helical 23 - 68 250 3000
1600 Spur 12.38 - 41.30 170 2700
1900 Spur 22.0 - 74.2 210 2700
2200 Spur 53.6 - 110.8 210 2700
Variable Displacement Axial Piston Pump
Displacement Max. Outlet Peak Pressure Max. Speed
Series
(cm³/rev) Pressure (bar) (bar) (RPM)
28 260 320 2700
EPP Series 35 260 320 2700
Type A 45 260 320 2700
63 260 320 2500
EPP Series 65 280 350 2200
Type B 75 280 350 2200
ECP Series 45 260 320 2500
Type C 63 260 320 2500
EPP EPP EPP
Control Type
Type A Type B Type C
Pressure regulation   
Pressure and flow regulation   
Electro - Hydraulic pressure control   
Pressure, flow and power regulation 
Pressure, flow and power regulation
(with solenoid control) 
Please consult Hema Endustri A.S. for different options
 PUMPS
Transm�ss�on O�l Pumps

Power-shift transmission pumps with

spur gear or gerotor design.

Min-Max speed 600-3000 RPM,

5 to 30 bar

Eng�ne O�l Pumps

Engine oil pumps with spur gear and
gerotor types.

Design, manufacturing and validation

test capability up to 400 HP diesel
engines

MOTORS
Alum�num Body Gear Motors
Displacement Max. Max. Speed
Series (cm³/rev) Pressure (bar) (RPM)
1MN 6.1 - 26 250 4000
1.5MN 12 - 30 250 3000
2MN 23 - 63 250 3000
Cast Iron Body Gear Motors
Displacement Max. Pressure Max. Speed
Series
(cm³/rev) (bar) (RPM)
1CM1 16 - 35 276 3000
1600 12.38 - 41.30 170 3000
1900 22.0 - 74.2 210 3000
2200 53.6 - 110.8 210 3000

Orb�tal Motors

HMP HMR HMS HMH

Series
Gerotor Geroller Geroller Geroller

Displacement (cm³/rev) 51.7 … 401.9 51.7 … 401.9 80 … 500 245 … 800

Max. Con�nuous 900 … 160 775 … 160 799 … 148 320 … 100
Speed
(RPM) Intermi�ent 1050 … 195 940 … 200 908 … 230 390 … 120

Max. Con�nuous 78 … 334 95 … 380 235 … 830 435 … 1023

Torque
(Nm) Intermi�ent 105 … 429 120 … 470 320 … 940 502 … 1378

Max. Con�nuous 125 … 70 140 … 70 210 … 120 80 … 80

Pressure
(bar) Intermi�ent 165 … 90 175 … 90 300 … 140 100 … 100

Please consult Hema Endustri A.S. for different options

 VALVES
Monoblock D�rect�onal Control Valves - Open Center
Flow Rate Pressure Number of
Series (LPM) (bar) Circuit Manual Pilot Solenoid
Spools
MV023 30 250 2, 3 Parallel X X
MV024 30 250 2, 3, 4 Parallel X X
MV026 30 250 2, 3, 4 Parallel X
MV027 30 250 1 Parallel X X X
MV045 50 280 1, 2 , 3 Parallel X
MV046 50 280 3, 4 Parallel X
MV051 50 280 2, 3, 4 Parallel X X
MV052 50 280 2, 3, 4 Parallel X X
MV053 60 250 2, 2+1 Parallel X X
MV055 60 250 2 Series X
MV061 80 250 2 Parallel X
MV062 80 250 1 Parallel X
MV093 90 300 2 Parallel Series X X X
MV180 180 250 6 Parallel X X
MV181 180 250 3 Parallel X X X
MV182 180 250 1 Parallel X X
033 150 230 6, 6+1, 6+2 Parallel X X
034 150 230 2, 3 Parallel X X X
035 150 230 2, 3 Parallel X X X
4009 205 210 1, 2, 3 Tandem X X
4109 205 210 1, 2, 3, 4, 5 Parallel X X
4011 270 230 1, 2, 3 Tandem X X X
MV059 375 250 3 Tandem X
4013 450 230 1, 2, 3 Tandem X X X

Sect�onal D�rect�onal Control Valves - Open Center

Flow Rate Pressure Number of

Series (LPM) (bar) Sections Circuit Manual Pilot Solenoid

MV060 60 250 1-5 Parallel X X X

MV050 80 280 1-9 Parallel X X X
MV090 100 280 1-9 Parallel X X X
Parallel
SV033 150 250 1 - 10 Tandem X X X
Series

Sect�onal D�rect�onal Control Valves - Closed Center

Flow Rate Pressure Number of

Series Sections Circuit Manual Pilot Solenoid
(LPM) (bar)

MV183 180 250 1 - 10 Parallel X X X

Please consult Hema Endustri A.S. for different options

 TRANSMISSION VALVES
Model Description Features
Four wheel drive & Adjusted outlet pressure 17 bar
DV016 differential lock valve 1. On/off solenoid Differential lock
(DT/DL valve) 2. On/off Solenoid Four wheel drive
Four wheel drive & Adjusted outlet pressure 19 bar
DV018 differential lock valve 1. On/off solenoid Differential lock
(DT/DL valve) 2. On/off solenoid Four wheel drive
Adjusted outlet pressure 14-15 bar
1. On/off solenoid Differential lock
DV019 Transmission control valve
2. On/off solenoid Four wheel drive
3. On/off solenoid Power take off
Adjusted outlet pressure 18-20 bar
1. On/off solenoid Four wheel drive
2. On/off solenoid Differential lock
3. Proportional solenoid Forward
DV103 Transmission control valve
4. Proportional solenoid Reverse
5. Proportional solenoid Power take off
6. Proportional solenoid Second speed
7. On/off solenoid Hand brake
Min. working flow rate 13 LPM
ODV200 Clutch control valve Max. working flow rate 40 LPM
Adjusted outlet pressure 18 bar
Min. working flow rate 13 LPM
KMV201 PTO control valve Max. working flow rate 40 LPM
Adjusted outlet pressure 18 bar

AUXILIARY VALVES
Model Description Features
Nominal flow rate 80 LPM
OV100 Priority valve with load sense Max. inlet pressure 250 bar
Controlled pressure difference 6 bar
Max. Flow rate 75 LPM
BV080 Baler gate valve
Max. Operating pressure 207 var
UV07 Line mounted unloader valve Nominal flow rat e 135 LPM
Nominal flow rate 200 LPM
SSV09 Diverter Valve
Diverting type 1 -> 1 of 2
Nominal flow rate 68 LPM
DSV06 Diverter Valve
Diverting type 2 -> 2 of 4
Nominal flow rate 200 LPM
DSV059 Diverter Valve
Diverting type 2 -> 2 of 4
Nominal flow rate 200 LPM
DSV11 Diverter Valve
Diverting type 2 -> 2 of 4
 LIFTS
Hydraulic lift is a lifting system located at the rear of tractors. Consist of a housing mounted on transmission case,
lifting arms, main shaft, crank arm, connecting rod, cylinder, piston and control valve. Implement is mounted on
hydraulic lift arms by using three using three point linkage.

Hema hydraulic power lifts are available for tractors which have engines from 18 HP to 140 HP
Hydraulic and electronic power lifts with position control, draft control and mix control
Rate of drop/lock valve for locking and controlled lowering
Electronically controlled hydraulic power lift has been designed and produced to offer a high
performance, ease of use and reliability.

L�ft
Tractor capac�ty Max. Auto On/Off or
Draft M�x load
eng�ne (at lower Max. flow work�ng Pos�t�on Rate of adjustable EH
Model C�rcu�t control control Autol�ft lower�ng sense
power l�nks) rate (LPM) pressure control drop Control control
(HP) (kg) (bar) speed valve
HK402 20 - 60 Open 1200 45 (EH:100) 172   OPT
HK451 30 - 80 Open 1510 45 195  
HK453 30 - 80 Open 1510 45 195    OPT 
HK240
HK290
35 - 60 Open 1600 25 235    OPT
HK546 40 - 80 Open 1780 45 195     
HK038 45 - 70 Open 2200 65 195      OPT OPT OPT
HK036 45 - 55 Open 1300 65 195      OPT OPT OPT
HK039 50 - 75 Open 2300 65 195     OPT  OPT OPT
HK065 50 - 80 Open 2400 65 195      OPT OPT OPT
HK080 50 - 80 Open 3200 65 (EH:100) 195      OPT OPT OPT
HK035 55 - 75 Open 3000 65 195     OPT  OPT OPT
HK037 55 - 75 Open 2200 65 195     OPT OPT
HK060 60 - 90 Open 2700 65 195      OPT OPT OPT
HK780 60 - 95 Open 2600 65 195     OPT OPT OPT
HK3075
75 - 90 Open 3750 45 250     OPT
HK3105
HK102 90 - 110 Open 4400 65 (EH:100) 195      OPT OPT OPT
HK104 120- 140 Open 7750 100 195     
JD1000 18 - 25 Open 300 14 138  
JD4000 30 - 65 Open 900 45 (EH:100) 172   OPT
JD5000 58 - 78 Closed 2200 75 195    
H001 75 - 95 Open 3300 55 (EH:100) 195      OPT
T275 75 - 102 Open 2600 100 195      
JD6000 90 - 120 Closed 4100 96 195    
 LIFT CONTROL VALVES
Max Max Rel�ef
Rate of
Hydraul�c Work�ng Rated Valve Surge
Model Drop
System Pressure Flow Pressure Rel�ef
Valve
(bar) (LPM) (bar)

KV350 Open Circuit 200 35 - - -

KV400 Open Circuit 200 45 - - -

KV450 Open Circuit 200 70 - 230 ±5 

KV500 Open Circuit 200 75 - - -

KV500-Manifold Closed Circuit 200 75 195 ±5 235 ±5 

KV600 Closed Circuit 200 80 195 ±5 240 ±5 

Electro-Hydraul�c H�tch Control System

Electro-hydraulic lift control valve is designed to control the three point hitch system on tractors. The system
consist of lift hitch control valve with proportional solenoids, electronic control unit, control panel (with switch
and lever options), Load and position sensors.

Features
Features

Single acting cylinder, open or closed center hydraulic system

Technical Data

Max. permissible pressure A: 220 bar, R: 5 bar.

Max. rated flow 100 LPM

Leakage 1 cc/min @180 bar with 23cSt oil

Port connections M22x1.5 internal thread

Hydraulic fluid Mineral oil to DIN/ISO

Operating temperature - 30…100°C

Recommended viscosity 20…..100cSt

Electrical connection AMP828657-3

Protection factor IP67

Operation type Proportional solenoid 12V, 2.4A

 ABOUT US
Hema Endüstri A.Ş. was founded with the trade name of «Hema Hidrolik Makine Sanayi ve Ticaret A.Ş» in 1973, in
the Organized Industrial Zone of ÇerkezköyITekirdağ, located in Northwest Turkey. During the first years of
production, hydraulic gears pumps and hydraulic lift covers were produced for agricultural tractors. As the year
passed, the company enlarged its product range to serve other industries and changed its name to Hema Endüstri
A.Ş. in 1998.

Today, as one of the leading engineering and manufacturing companies in Turkey, it has become a global
company producing for the Automotive, Tractor, Construction Equipment OEMs, Aerospace and Defense
Industries. Hema Endüstri A.Ş. produces hydraulic high pressure gear pumps, mechanical and electronically
controlled hydraulic lift, control valves, distributors,, gears and gearboxes, transmissions, front axles, steering axles
and rigid axles, crankshafts, engine balancers, hydraulic steering systems

Competing with leading manufacturers of the world, Hema continuously aims new technological capabilities in
order to improve its product quality and efficiency. Giving particular importance to quality and customer
satisfaction, Hema has over the years become a major OEM supplier in the industries that it serves. Hema owns
well-trained, qualified and experienced 3000 strong workforce which fuels its growth and achievements

Headquarters Product�on S�te �n INDIA Off�ce �n CHINA

Büyükdere Cad. No:235 34398 Hema Driveline & Hydraulics Pvt. Ltd. No: 1786 Jianghan Road Binjiang District
Maslak/Istanbul/TURKIYE Plot No: PAP V-103/5 MIDC Phase II Hangzhou / CHINA
Tel : +90 212 285 2240 Chakan Industrial Area Wasuli Tel : +86 0571 880 569 06
Fax : +90 212 286 4455 Chakan / Pune 410501 INDIA
Tel : +91 213 569 0046
Fax : +91 213 569 99 47

Product�on S�te �n TURKIYE North Amer�ca Corporat�on �n USA

Hema Endüstri A.Ş Hema Driveline and Hydraulics Inc.
G.O.P Mah. (OSB) 4. Cadde No:5 59500 901 Mittel Drive, Wood Dale, IL 60191 USA
Cerkezkoy/Tekirdag/TURKIYE Tel : +1 847 737 1862
Tel : +90 282 758 1040 Fax : +1 847 430 4803
Fax : +90 282 758 1071 Email: info@hema-usa.com
Email : marketing@hattat.com.tr