LM1117

SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

LM1117 800-mA, Low-Dropout Linear Regulator

1 Features 3 Description
• For a newer drop-in alternative, see the TLV1117 The LM1117 is a low dropout voltage regulator with a
• For drop-in replacements in fixed output SOT-223 dropout of 1.2 V at 800 mA of load current.
package configuration and improved functionality,
The LM1117 is available in an adjustable version,
see the TLV761
which can set the output voltage from 1.25 V to 13.8 V
• Available in 1.8 V, 2.5 V, 3.3 V, 5 V, and adjustable
with only two external resistors. In addition, the device
versions
is available in five fixed voltages, 1.8 V, 2.5 V, 3.3 V,
• Space-saving SOT-223 and WSON packages
and 5 V.
• Current limiting and thermal protection
• Output current: 800 mA The LM1117 offers current limiting and thermal
• Line regulation: 0.2% (maximum) shutdown. The circuit includes a Zener trimmed band-
• Load regulation: 0.4% (maximum) gap reference to assure output voltage accuracy to
• Temperature range: within ±1%.
– LM1117: 0°C to +125°C A minimum of 10-µF tantalum capacitor is required
– LM1117I: –40°C to +125°C at the output to improve the transient response and
2 Applications stability.
• AC drive power stage modules Package Information
• Merchant network and server PSU PART NUMBER PACKAGE(1) BODY SIZE (NOM)
• Industrial AC/DC DCY (SOT-223, 4) 6.50 mm × 3.50 mm
• Ultrasound scanners NDE (TO-220, 3) 14.986 mm × 10.16 mm
• Servo drive control modules LM1117,
NDP (TO-252, 3) 6.58 mm × 6.10 mm
LM1117I
NGN (WSON, 8) 4.00 mm × 4.00 mm
KTT (TO-263, 3) 10.18 mm × 8.41 mm

(1) For all available packages, see the orderable addendum at

the end of the data sheet.

Adjustable Output Regulator

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

Table of Contents
1 Features............................................................................1 8.3 Feature Description...................................................11
2 Applications..................................................................... 1 8.4 Device Functional Modes..........................................13
3 Description.......................................................................1 9 Application and Implementation.................................. 14
4 Revision History.............................................................. 2 9.1 Application Information............................................. 14
5 Device Comparison Table...............................................3 9.2 Typical Application.................................................... 14
6 Pin Configuration and Functions...................................3 9.3 System Examples..................................................... 16
7 Specifications.................................................................. 4 9.4 Power Supply Recommendations.............................17
7.1 Absolute Maximum Ratings........................................ 4 9.5 Layout....................................................................... 17
7.2 ESD Ratings............................................................... 4 10 Device and Documentation Support..........................22
7.3 Recommended Operating Conditions.........................4 10.1 Documentation Support.......................................... 22
7.4 Thermal Information....................................................4 10.2 Receiving Notification of Documentation Updates..22
7.5 LM1117 Electrical Characteristics............................... 5 10.3 Support Resources................................................. 22
7.6 LM1117I Electrical Characteristics.............................. 7 10.4 Trademarks............................................................. 22
7.7 Typical Characteristics................................................ 9 10.5 Electrostatic Discharge Caution..............................22
8 Detailed Description...................................................... 11 10.6 Glossary..................................................................22
8.1 Overview................................................................... 11 11 Mechanical, Packaging, and Orderable
8.2 Functional Block Diagram......................................... 11 Information.................................................................... 22

4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.

Changes from Revision P (July 2022) to Revision Q (January 2023) Page

• Added drop-in replacement bullet for TLV761 to Features section.....................................................................1

Changes from Revision O (June 2020) to Revision P (July 2022) Page

• Updated the numbering format for tables, figures, and cross-references throughout the document..................1

2 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 LM1117
www.ti.com SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

5 Device Comparison Table

IOUT PARAMETER LM1117 TLV1117 UNIT
Input voltage range (max) 15 15 V
Load regulation accuracy 1.6 1.6 %
PSRR (120 Hz) 75 75 dB
Recommended operating temperature 0 – 125 -40 – 125 °C
800 mA SOT-223 TJA 61.6 104.3 °C/W
TO-220 TJA 23.8 30.1 °C/W
TO-252 TJA 45.1 50.9 °C/W
TO-263 TJA 41.3 27.5 °C/W
WSON-8 TJA 39.3 38.3 °C/W

6 Pin Configuration and Functions

Figure 6-2. NDE Package, 3-Pin TO-220 (Top View)

Figure 6-1. DCY Package, 4-Pin SOT (Top View)

Figure 6-3. KTT Package, 3-Pin TO-263 (Top View)

Figure 6-4. NDP Package, 3-Pin TO-252 (Top View)

ADJ/GND 1 8 NOT CONNECTED

VIN 2 7 VOUT
VOUT
VIN 3 6 VOUT

VIN 4 5 VOUT

When using the WSON package pins 2, 3, and 4 must be connected together and pins 5, 6, and 7 must be connected together.
Figure 6-5. NGN Package, 8-Pin WSON (Top View)

Table 6-1. Pin Functions

PIN
I/O DESCRIPTION
NAME TO-252 WSON SOT-223 TO-263 TO-220
Adjust pin for adjustable output option. Ground pin for fixed
ADJ/GND 1 1 1 1 1 —
output option.
VIN 3 2, 3, 4 3 3 3 I Input voltage pin for the regulator
5, 6, 7,
VOUT 2 , TAB 2, 4 2, TAB 2, TAB O Output voltage pin for the regulator
TAB

Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 3

Product Folder Links: LM1117
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

7 Specifications
7.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
Maximum input voltage (VIN to GND) 20 V
Power dissipation(2) Internally Limited
Junction temperature (TJ)(2) 150 °C
Storage temperature, Tstg –65 150 °C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress
ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under
Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability.
(2) The maximum power dissipation is a function of TJ(max) , RθJA, and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(max)–TA)/RθJA. All numbers apply for packages soldered directly into a PCB.

7.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000 V

(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Pins listed as
±2000 V may actually have higher performance.

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
Input voltage (VIN to GND) 15 V
LM1117 0 125 °C
Junction temperature (TJ)(1)
LM1117I −40 125

(1) The maximum power dissipation is a function of TJ(max) , RθJA, and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(max)–TA)/RθJA. All numbers apply for packages soldered directly into a PCB.

7.4 Thermal Information

LM1117, LM1117I
DCY NDE NDP NGN KTT
THERMAL METRIC(1) UNIT
(SOT-223) (TO-220) (TO-252) (WSON) (TO-263)
4 PINS 3 PINS 3 PINS 8 PINS 3 PINS
RθJA Junction-to-ambient thermal resistance 61.6 23.8 45.1 39.3 41.3 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 42.5 16.6 52.1 31.4 44.1 °C/W
RθJB Junction-to-board thermal resistance 10.4 5.3 29.8 16.5 24.2 °C/W
ψJT Junction-to-top characterization parameter 2.9 3.1 4.5 0.3 10.9 °C/W
ψJB Junction-to-board characterization parameter 10.3 5.3 29.4 16.7 23.2 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance — 1.5 1.3 5.6 1.3 °C/W

(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC package thermal metrics application
report.

4 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 LM1117
www.ti.com SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

7.5 LM1117 Electrical Characteristics

unless otherwise specified, TJ = 25°C
PARAMETER TEST CONDITIONS MIN(1) TYP(2) MAX(1) UNIT
LM1117-ADJ
1.238 1.25 1.262
IOUT = 10 mA, VIN – VOUT = 2 V, TJ = 25°C
VREF Reference voltage LM1117-ADJ TJ = 25°C 1.25 V
10 mA ≤ IOUT ≤ 800 mA, 1.4 V ≤ over the junction temperature range
VIN – VOUT ≤ 10 V 1.225 1.27
0°C to 125°C
LM1117-1.8
1.782 1.8 1.818
IOUT = 10 mA, VIN = 3.8 V, TJ = 25°C

LM1117-1.8 TJ = 25°C 1.8 V

0 ≤ IOUT ≤ 800 mA, 3.2 V ≤ VIN ≤ over the junction temperature range
10 V 1.746 1.854
0°C to 125°C
LM1117-2.5
2.475 2.5 2.525
IOUT = 10 mA, VIN = 4.5 V, TJ = 25°C

LM1117-2.5 TJ = 25°C 2.5 V

0 ≤ IOUT ≤ 800 mA, 3.9 V ≤ VIN ≤ over the junction temperature range
10 V 2.45 2.55
0°C to 125°C
VOUT Output voltage
LM1117-3.3
3.267 3.3 3.333
IOUT = 10 mA, VIN = 5 V TJ = 25°C

LM1117-3.3 TJ = 25°C 3.3 V

0 ≤ IOUT ≤ 800 mA, 4.75 V ≤ VIN over the junction temperature range
≤ 10 V 3.235 3.365
0°C to 125°C
LM1117-5.0
4.95 5 5.05
IOUT = 10 mA, VIN = 7 V, TJ = 25°C

LM1117-5.0 TJ = 25°C 5 V
0 ≤ IOUT ≤ 800 mA, 6.5 V ≤ VIN ≤ over the junction temperature range
12 V 4.9 5.1
0°C to 125°C

LM1117-ADJ TJ = 25°C 0.035%

IOUT = 10mA, 1.5V ≤ VIN-VOUT ≤ over the junction temperature range
13.75V 0.2%
0°C to 125°C
TJ = 25°C 1
LM1117-1.8
over the junction temperature range mV
IOUT = 0 mA, 3.2 V ≤ VIN ≤ 10 V 6
0°C to 125°C
TJ = 25°C 1
LM1117-2.5
ΔVOUT Line regulation(3) over the junction temperature range mV
IOUT = 0 mA, 3.9 V ≤ VIN ≤ 10 V 6
0°C to 125°C
TJ = 25°C 1
LM1117-3.3
mV
IOUT = 0 mA, 4.75 V ≤ VIN ≤ 15 V over the junction temperature range 6
0°C to 125°C
TJ = 25°C 1
LM1117-5.0
over the junction temperature range mV
IOUT = 0 mA, 6.5 V ≤ VIN ≤ 15 V 10
0°C to 125°C

LM1117-ADJ TJ = 25°C 0.2%

VIN – VOUT = 3 V, 10 ≤ IOUT ≤ 800 over the junction temperature range
mA 0.4%
0°C to 125°C
TJ = 25°C 1
LM1117-1.8
over the junction temperature range mV
VIN = 3.2 V, 0 ≤ IOUT ≤ 800 mA 10
0°C to 125°C
TJ = 25°C 1
LM1117-2.5
ΔVOUT Load regulation(3) over the junction temperature range mV
VIN = 3.9 V, 0 ≤ IOUT ≤ 800 mA 10
0°C to 125°C
TJ = 25°C 1
LM1117-3.3
over the junction temperature range mV
VIN = 4.75 V, 0 ≤ IOUT ≤ 800 mA 10
0°C to 125°C
TJ = 25°C 1
LM1117-5.0
over the junction temperature range mV
VIN = 6.5 V, 0 ≤ IOUT ≤ 800 mA 15
0°C to 125°C

Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 5

Product Folder Links: LM1117
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

7.5 LM1117 Electrical Characteristics (continued)

unless otherwise specified, TJ = 25°C
PARAMETER TEST CONDITIONS MIN(1) TYP(2) MAX(1) UNIT
TJ = 25°C 1.1
IOUT = 100 mA over the junction temperature range V
1.2
0°C to 125°C
TJ = 25°C 1.15
VIN –
Dropout voltage(4) IOUT = 500 mA over the junction temperature range V
V OUT 1.25
0°C to 125°C
TJ = 25°C 1.2
IOUT = 800 mA over the junction temperature range V
1.3
0°C to 125°C
ILIMIT Current limit VIN – VOUT = 5 V, TJ = 25°C 800 1200 1500 mA
TJ = 25°C 1.7
Minimum load LM1117-ADJ
over the junction temperature range mA
current(5) VIN = 15 V 5
0°C to 125°C
TJ = 25°C 5
LM1117-1.8
over the junction temperature range mA
VIN ≤ 15 V 10
0°C to 125°C
TJ = 25°C 5
LM1117-2.5
over the junction temperature range mA
VIN ≤ 15 V 10
0°C to 125°C
Quiescent current
TJ = 25°C 5
LM1117-3.3
over the junction temperature range mA
VIN ≤ 15 V 10
0°C to 125°C
TJ = 25°C 5
LM1117-5.0
over the junction temperature range mA
VIN ≤ 15 V 10
0°C to 125°C
Thermal regulation TA = 25°C, 30-ms pulse 0.01 0.1 %/W
TJ = 25°C 75
fRIPPLE = 1 20 Hz, VIN – VOUT = 3
Ripple regulation over the junction temperature range dB
V VRIPPLE = 1 VPP 60
0°C to 125°C
TJ = 25°C 60
Adjust pin current μA
over the junction temperature range 0°C to 125°C 120
TJ = 25°C 0.2
Adjust pin current 10 ≤ IOUT ≤ 80 0mA,
over the junction temperature range µA
change 1.4 V ≤ VIN – VOUT ≤ 10 V 5
0°C to 125°C
Temperature stability 0.5%
Long term stability TA = 125°C, 1000 hours 0.3%
RMS output noise (% of VOUT), 10 Hz ≤ f ≤ 10 kHz 0.003%

(1) All limits are ensured by testing or statistical analysis.

(2) Typical Values represent the most likely parametric normal.
(3) Load and line regulation are measured at constant junction room temperature.
(4) The dropout voltage is the input/output differential at which the circuit ceases to regulate against further reduction in input voltage. This
voltage is measured when the output voltage has dropped 100 mV from the nominal value obtained at VIN = VOUT + 1.5 V.
(5) The minimum output current required to maintain regulation.

6 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 LM1117
www.ti.com SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

7.6 LM1117I Electrical Characteristics

unless otherwise specified, TJ = 25°C
PARAMETER TEST CONDITIONS MIN(1) TYP(2) MAX(1) UNIT
LM1117I-ADJ
1.238 1.25 1.262
IOUT = 10 mA, VIN – VOUT = 2 V, TJ = 25°C
TJ = 25°C 1.25
VREF Reference voltage LM1117I-ADJ V
10 mA ≤ IOUT ≤ 800 mA, 1.4 V ≤ VIN over the junction
– VOUT ≤ 10 V temperature range – 1.2 1.29
40°C to 125°C
LM1117I-3.3
3.267 3.3 3.333
IOUT = 10 mA, VIN = 5 V, TJ = 25°C
TJ = 25°C 3.3
LM1117I-3.3 V
0 ≤ IOUT ≤ 800 mA, 4.75 V ≤ VIN ≤ 10 over the junction
V temperature range – 3.168 3.432
40°C to 125°C
VOUT Output voltage
LM1117I-5.0
4.95 5 5.05
IOUT = 10 mA, VIN = 7 V, TJ = 25°C
TJ = 25°C 5
LM1117I-5.0 V
0 ≤ IOUT ≤ 800 mA, 6.5 V ≤ VIN ≤ 12 over the junction
V temperature range – 4.8 5.2
40°C to 125°C
TJ = 25°C 0.035%
LM1117I-ADJ
IOUT = 10 mA, 1.5 V ≤ VIN – VOUT ≤ over the junction
13.75 V temperature range – 0.3%
40°C to 125°C
TJ = 25°C 1
LM1117I-3.3 over the junction
ΔVOUT Line regulation(3) mV
IOUT = 0 mA, 4.75 V ≤ VIN ≤ 15 V temperature range – 10
40°C to 125°C
TJ = 25°C 1
LM1117I-5.0 over the junction mV
IOUT = 0 mA, 6.5 V ≤ VIN ≤ 15 V temperature range – 15
40°C to 125°C
TJ = 25°C 0.2%
LM1117I-ADJ
VIN – VOUT = 3 V, 10 ≤ IOUT ≤ 800 over the junction
mA temperature range – 0.5%
40°C to 125°C
TJ = 25°C 1
LM1117I-3.3 over the junction
ΔVOUT Load regulation(3) mV
VIN = 4.75 V, 0 ≤ IOUT ≤ 800 mA temperature range – 15
40°C to 125°C
TJ = 25°C 1
LM1117I-5.0 over the junction mV
VIN = 6.5 V, 0 ≤ IOUT ≤ 800 mA temperature range – 20
40°C to 125°C

Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 7

Product Folder Links: LM1117
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

7.6 LM1117I Electrical Characteristics (continued)

unless otherwise specified, TJ = 25°C
PARAMETER TEST CONDITIONS MIN(1) TYP(2) MAX(1) UNIT
TJ = 25°C 1.1

IOUT = 100 mA over the junction V

temperature range – 1.3
40°C to 125°C
TJ = 25°C 1.15

VIN-V OUT Dropout voltage(4) IOUT = 500 mA over the junction V

temperature range – 1.35
40°C to 125°C
TJ = 25°C 1.2

IOUT = 800 mA over the junction V

temperature range – 1.4
40°C to 125°C
ILIMIT Current limit VIN – VOUT = 5 V, TJ = 25°C 800 1200 1500 mA
TJ = 25°C 1.7
Minimum load LM1117I-ADJ over the junction mA
current(5) VIN = 15 V temperature range – 5
40°C to 125°C
TJ = 25°C 5
LM1117I-3.3 over the junction mA
VIN ≤ 15 V temperature range – 15
40°C to 125°C
Quiescent current
TJ = 25°C 5
LM1117I-5.0 over the junction mA
VIN ≤ 15 V temperature range – 15
40°C to 125°C
Thermal regulation TA = 25°C, 30-ms pulse 0.01 0.1 %/W
TJ = 25°C 75
fRIPPLE = 120 Hz, VIN – VOUT = 3 V over the junction
Ripple regulation dB
VRIPPLE = 1 VPP temperature range – 60
40°C to 125°C
TJ = 25°C 60
Adjust pin current μA
over the junction temperature range –40°C to 125°C 120
TJ = 25°C 0.2
Adjust pin current 10 ≤ IOUT ≤ 800 mA, over the junction µA
change 1.4 V ≤ VIN – VOUT ≤ 10 V temperature range – 10
40°C to 125°C
Temperature
0.5%
stability
Long term stability TA = 125°C, 1000 hours 0.3%
RMS output noise (% of VOUT), 10 Hz ≤ f ≤ 10 kHz 0.003%

(1) All limits are ensured by testing or statistical analysis.

(2) Typical Values represent the most likely parametric normal.
(3) Load and line regulation are measured at constant junction room temperature.
(4) The dropout voltage is the input/output differential at which the circuit ceases to regulate against further reduction in input voltage. This
voltage is measured when the output voltage has dropped 100 mV from the nominal value obtained at VIN = VOUT + 1.5 V.
(5) The minimum output current required to maintain regulation.

8 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 LM1117
www.ti.com SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

7.7 Typical Characteristics

Figure 7-1. Dropout Voltage (VIN – VOUT) Figure 7-2. Short-Circuit Current

Figure 7-3. Load Regulation Figure 7-4. LM1117-ADJ Ripple Rejection

Figure 7-5. LM1117-ADJ Ripple Rejection vs Current Figure 7-6. Temperature Stability

Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 9

Product Folder Links: LM1117
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

7.7 Typical Characteristics (continued)

Figure 7-7. Adjust Pin Current Figure 7-8. LM1117-5.0 Load Transient Response

Figure 7-9. LM1117-5.0 Line Transient Response

10 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 LM1117
www.ti.com SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

8 Detailed Description
8.1 Overview
The LM1117 adjustable version develops a 1.25-V reference voltage, VREF, between the output and the adjust
pin. As shown in Figure 8-1, this voltage is applied across resistor R1 to generate a constant current I1. The
current IADJ from the adjust pin can introduce error to the output, but because this current is very small (60 μA)
compared to the I1 and very constant with line and load changes, the error can be ignored. The constant current
I1 then flows through the output set resistor R2 and sets the output voltage to the desired level.
For fixed voltage devices, R1 and R2 are integrated inside the devices.

Figure 8-1. Basic Adjustable Regulator

8.2 Functional Block Diagram

8.3 Feature Description

8.3.1 Load Regulation
The LM1117 regulates the voltage that appears between the output and ground pins, or between the output and
adjust pins. In some cases, line resistances can introduce errors to the voltage across the load. To obtain the
best load regulation, a few precautions are needed.
Figure 8-2 illustrates a typical application using a fixed output regulator. The Rt1 and Rt2 are the line
resistances. Obviously the VLOAD is less than the VOUT by the sum of the voltage drops along the line
resistances. In this case, the load regulation at the RLOAD is degraded from the data sheet specification. To
improve this degradation, the load must be tied directly to the output terminal on the positive side and directly
tied to the ground terminal on the negative side.
Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 11
Product Folder Links: LM1117
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

Figure 8-2. Typical Application Using Fixed Output Regulator

When the adjustable regulator is used (Figure 8-3), the best performance is obtained with the positive side of
the resistor R1 tied directly to the output terminal of the regulator rather than near the load. This eliminates
line drops from appearing effectively in series with the reference and degrading regulation. For example, a 5-V
regulator with 0.05-Ω resistance between the regulator and load has a load regulation resulting from the line
resistance of 0.05 Ω × IL. If R1 (= 125 Ω) is connected near the load, the effective line resistance is 0.05 Ω (1 +
R2 / R1) or in this case, four times worse. In addition, the ground side of the resistor R2 can be returned near the
ground of the load to provide remote ground sensing and improve load regulation.

Figure 8-3. Best Load Regulation Using Adjustable Output Regulator

12 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 LM1117
www.ti.com SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

8.4 Device Functional Modes

8.4.1 Protection Diodes
Under normal operation, the LM1117 regulators do not need any protection diode. With the adjustable device,
the internal resistance between the adjust and output terminals limits the current. No diode is needed to divert
the current around the regulator even with capacitor on the adjust terminal. The adjust pin can take a transient
signal of ±25V with respect to the output voltage without damaging the device.
When a output capacitor is connected to a regulator and the input is shorted to ground, the output capacitor
will discharge into the output of the regulator. The discharge current depends on the value of the capacitor, the
output voltage of the regulator, and rate of decrease of VIN. In the LM1117 regulators, the internal diode between
the output and input pins can withstand microsecond surge currents of 10A to 20A. With an extremely large
output capacitor (≥1000 µF), and with input instantaneously shorted to ground, the regulator could be damaged.
In this case, an external diode is recommended between the output and input pins to protect the regulator, as
shown in Figure 8-4.

Figure 8-4. Regulator With Protection Diode

Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 13

Product Folder Links: LM1117
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

9 Application and Implementation

Note
Information in the following applications sections is not part of the TI component specification,
and TI does not warrant its accuracy or completeness. TI’s customers are responsible for
determining suitability of components for their purposes, as well as validating and testing their design
implementation to confirm system functionality.

9.1 Application Information

The LM1117 is a versatile and high performance linear regulator with a wide temperature range and tight line/
load regulation operation. An output capacitor is required to further improve transient response and stability. For
the adjustable option, the ADJ pin can also be bypassed to achieve very high ripple-rejection ratios. The LM1117
is versatile in its applications, including being used as a post regulator for DC/DC converters, battery chargers,
and microprocessor supplies.
9.2 Typical Application

Figure 9-1. 1.25-V to 10-V Adjustable Regulator With Improved Ripple Rejection

9.2.1 Design Requirements

The device component count is very minimal, employing two resistors as part of a voltage divider circuit
and an output capacitor for load regulation. A 10-μF tantalum on the input is a suitable input capacitor for
almost all applications. An optional bypass capacitor across R2 can also be used to improve PSRR. See the
Recommended Operating Conditions table for more information.
9.2.2 Detailed Design Procedure
The output voltage is set based on the selection of the two resistors, R1 and R2, as shown in Figure 9-1. For
details on capacitor selection, see the External Capacitors section.
9.2.2.1 External Capacitors
9.2.2.1.1 Input Bypass Capacitor
An input capacitor is recommended. A 10-µF tantalum on the input is a suitable input capacitor for almost all
applications.
9.2.2.1.2 Adjust Terminal Bypass Capacitor
The adjust terminal can be bypassed to ground with a bypass capacitor (CADJ) to improve ripple rejection. This
bypass capacitor prevents ripple from being amplified as the output voltage is increased. At any ripple frequency,
the impedance of the CADJ must be less than R1 to prevent the ripple from being amplified:

14 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 LM1117
www.ti.com SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

1 / (2π × fRIPPLE × CADJ) < R1 (1)

The R1 is the resistor between the output and the adjust pin. The value is normally in the range of 100 Ω to 200
Ω. For example, with R1 = 124 Ω and fRIPPLE = 120 Hz, the CADJ must be > 11µF.
9.2.2.1.3 Output Capacitor
The output capacitor is critical in maintaining regulator stability, and must meet the required conditions for both
minimum amount of capacitance and equivalent series resistance (ESR). The minimum output capacitance
required by the LM1117 is 10 µF, if a tantalum capacitor is used. Any increase of the output capacitance will
merely improve the loop stability and transient response. The ESR of the output capacitor should range between
0.3 Ω to 22 Ω. In the case of the adjustable regulator, when the CADJ is used, a larger output capacitance (22-µF
tantalum) is required.
9.2.3 Application Curve
As shown in Figure 9-2, the dropout voltage will vary with output current and temperature. Care should be taken
during design to ensure the dropout voltage requirement is met across the entire operating temperature and
output current range.

Figure 9-2. Dropout Voltage (VIN – VOUT)

Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 15

Product Folder Links: LM1117
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

9.3 System Examples

Several circuits can be realized with the LM1117. The circuit diagrams in this section demonstrate multiple
system examples that can be utilized in many applications.

Figure 9-3. Fixed Output Regulator

Figure 9-4. Adjusting Output of Fixed Regulators

Figure 9-5. Regulator With Reference

Figure 9-6. 5-V Logic Regulator With Electronic
Shutdown*

Figure 9-7. Battery Backed-Up Regulated Supply

Figure 9-8. Low Dropout Negative Supply

16 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 LM1117
www.ti.com SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

9.4 Power Supply Recommendations

The input supply to the LM1117 must be kept at a voltage level such that the maximum rating is not exceeded.
The minimum dropout voltage must also be met with extra headroom when possible to keep the LM1117 in
regulation. An input capacitor is recommended. For more information regarding capacitor selection, see the
External Capacitors section.
9.5 Layout
9.5.1 Layout Guidelines
Some layout guidelines must be followed to ensure proper regulation of the output voltage with minimum noise.
Traces carrying the load current must be wide to reduce the amount of parasitic trace inductance and the
feedback loop from VOUT to ADJ must be kept as short as possible. To improve PSRR, a bypass capacitor can
be placed at the ADJ pin and must be located as close as possible to the IC. In cases when VIN shorts to
ground, an external diode must be placed from VOUT to VIN to divert the surge current from the output capacitor
and protect the IC. The diode must be placed close to the corresponding IC pins to increase their effectiveness.
9.5.1.1 Heat Sink Requirements
When an integrated circuit operates with an appreciable current, the junction temperature is elevated. The
thermal limits must be quantified in order to achieve acceptable performance and reliability. This limit is
determined by summing the individual parts consisting of a series of temperature rises from the semiconductor
junction to the operating environment. A one-dimensional steady-state model of conduction heat transfer is
demonstrated in Figure 9-9. The heat generated at the device junction flows through the die to the die attach
pad, through the lead frame to the surrounding case material, to the printed circuit board, and eventually to the
ambient environment. Below is a list of variables that may affect the thermal resistance and in turn the need for a
heat sink.
Table 9-1. Component and Application Variables
RθJC (COMPONENT VARIABLES) RθJA (Application Variables)
Lead frame size and material Mounting pad size, material, and location
No. of conduction pins Placement of mounting pad
Die size PCB size and material
Die attach material Traces length and width
Adjacent heat sources
Volume of air
Molding compound size and material
Ambient temperature
Shape of mounting pad

The case temperature is measured at the point where the leads contact with the mounting pad surface

Figure 9-9. Cross-Sectional View of Integrated Circuit Mounted on a Printed Circuit Board

Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 17

Product Folder Links: LM1117
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

The LM1117 regulators have internal thermal shutdown to protect the device from over-heating. Under all
possible operating conditions, the junction temperature of the LM1117 must be within the range of 0°C to
+125°C. A heat sink can be required depending on the maximum power dissipation and maximum ambient
temperature of the application. To determine if a heat sink is needed, the power dissipated by the regulator, PD ,
must be calculated:

IIN = IL + IG (2)

PD = (VIN-VOUT)I L + VINIG (3)

Figure 9-10 shows the voltages and currents which are present in the circuit.

Figure 9-10. Power Dissipation Diagram

The next parameter which must be calculated is the maximum allowable temperature rise, TR(max):

TR(max) = TJ(max)-TA(max) (4)

where
• TJ(max) is the maximum allowable junction temperature (125°C) which is encountered in the application
• TA(max) is the maximum ambient temperature which is encountered in the application
Using the calculated values for TR(max) and PD, the maximum allowable value for the junction-to-ambient
thermal resistance (RθJA) can be calculated:

RθJA = TR(max) / PD (5)

For the maximum allowable value for θJA, see the Thermal Information table.
As a design aid, Table 9-2 shows the value of the θJA of SOT-223 and TO-252 for different heat sink area. Figure
9-11 and Figure 9-12 reflects the same test results as what are in the Table 9-2
Figure 9-13 and Figure 9-14 shows the maximum allowable power dissipation vs. ambient temperature for the
SOT-223 and TO-252 device. Figure 9-15 and Figure 9-16 shows the maximum allowable power dissipation vs.
copper area (in2) for the SOT-223 and TO-252 devices. Please see AN1028 for power enhancement techniques
to be used with SOT-223 and TO-252 packages.
The AN-1187 Leadless Leadframe Package (LLP) application note discusses improved thermal performance
and power dissipation for the WSON.
Table 9-2. RθJA Different Heat Sink Area
LAYOUT COPPER AREA THERMAL RESISTANCE
Top Side (in2)(1) Bottom Side (in2) (θJA,°C/W) SOT-223 (θJA,°C/W) TO-252
1 0.0123 0 136 103
2 0.066 0 123 87
3 0.3 0 84 60
4 0.53 0 75 54
5 0.76 0 69 52
6 1 0 66 47
7 0 0.2 115 84

18 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 LM1117
www.ti.com SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

Table 9-2. RθJA Different Heat Sink Area (continued)

LAYOUT COPPER AREA THERMAL RESISTANCE
8 0 0.4 98 70
9 0 0.6 89 63
10 0 0.8 82 57
11 0 1 79 57
12 0.066 0.066 125 89
13 0.175 0.175 93 72
14 0.284 0.284 83 61
15 0.392 0.392 75 55
16 0.5 0.5 70 53

(1) Tab of device attached to topside copper

Figure 9-11. RθJA vs 1-oz Copper Area for SOT-223 Figure 9-12. RθJA vs 2-oz Copper Area for TO-252

Figure 9-13. Maximum Allowable Power Figure 9-14. Maximum Allowable Power
Dissipation vs Ambient Temperature for SOT-223 Dissipation vs Ambient Temperature for TO-252

Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 19

Product Folder Links: LM1117
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

Figure 9-15. Maximum Allowable Power Figure 9-16. Maximum Allowable Power
Dissipation vs 1-oz Copper Area for SOT-223 Dissipation vs 2-oz Copper Area for TO-252

Figure 9-17. Top View of the Thermal Test Pattern in Actual Scale

20 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 LM1117
www.ti.com SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023

Figure 9-18. Bottom View of the Thermal Test Pattern in Actual Scale

9.5.2 Layout Example

Figure 9-19. Layout Example (SOT-223)

Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 21

Product Folder Links: LM1117
LM1117
SNOS412Q – FEBRUARY 2000 – REVISED JANUARY 2023 www.ti.com

10 Device and Documentation Support

10.1 Documentation Support
10.1.1 Related Documentation
For related documentation see the following:
Texas Instruments, AN-1187 Leadless Leadframe Package (LLP) application note
10.2 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on
Subscribe to updates to register and receive a weekly digest of any product information that has changed. For
change details, review the revision history included in any revised document.
10.3 Support Resources
TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight
from the experts. Search existing answers or ask your own question to get the quick design help you need.
Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do
not necessarily reflect TI's views; see TI's Terms of Use.
10.4 Trademarks
TI E2E™ is a trademark of Texas Instruments.
All trademarks are the property of their respective owners.
10.5 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.

10.6 Glossary
TI Glossary This glossary lists and explains terms, acronyms, and definitions.

11 Mechanical, Packaging, and Orderable Information

The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.

22 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: LM1117

 PACKAGE OPTION ADDENDUM

www.ti.com 21-Sep-2023

PACKAGING INFORMATION

Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) Ball material (3) (4/5)
(6)

LM1117DT-1.8/NOPB ACTIVE TO-252 NDP 3 75 RoHS & Green SN Level-2-260C-1 YEAR 0 to 125 LM1117 Samples
DT-1.8
LM1117DT-2.5/NOPB ACTIVE TO-252 NDP 3 75 RoHS & Green SN Level-2-260C-1 YEAR 0 to 125 LM1117 Samples
DT-2.5
LM1117DT-3.3/NOPB ACTIVE TO-252 NDP 3 75 RoHS & Green SN Level-2-260C-1 YEAR 0 to 125 LM1117 Samples
DT-3.3
LM1117DT-5.0/NOPB ACTIVE TO-252 NDP 3 75 RoHS & Green SN Level-2-260C-1 YEAR 0 to 125 LM1117 Samples
DT-5.0
LM1117DT-ADJ/NOPB ACTIVE TO-252 NDP 3 75 RoHS & Green SN Level-2-260C-1 YEAR 0 to 125 LM1117 Samples
DT-ADJ
LM1117DTX-1.8/NOPB ACTIVE TO-252 NDP 3 2500 RoHS & Green SN Level-2-260C-1 YEAR 0 to 125 LM1117 Samples
DT-1.8
LM1117DTX-2.5/NOPB ACTIVE TO-252 NDP 3 2500 RoHS & Green SN Level-2-260C-1 YEAR 0 to 125 LM1117 Samples
DT-2.5
LM1117DTX-3.3/NOPB ACTIVE TO-252 NDP 3 2500 RoHS & Green SN Level-2-260C-1 YEAR 0 to 125 LM1117 Samples
DT-3.3
LM1117DTX-5.0/NOPB ACTIVE TO-252 NDP 3 2500 RoHS & Green SN Level-2-260C-1 YEAR 0 to 125 LM1117 Samples
DT-5.0
LM1117DTX-ADJ/NOPB ACTIVE TO-252 NDP 3 2500 RoHS & Green SN Level-2-260C-1 YEAR 0 to 125 LM1117 Samples
DT-ADJ
LM1117IDT-3.3/NOPB ACTIVE TO-252 NDP 3 75 RoHS & Green SN Level-2-260C-1 YEAR -40 to 125 LM1117 Samples
IDT-3.3
LM1117IDT-5.0/NOPB ACTIVE TO-252 NDP 3 75 RoHS & Green SN Level-2-260C-1 YEAR -40 to 125 LM1117 Samples
IDT-5.0
LM1117IDT-ADJ/NOPB ACTIVE TO-252 NDP 3 75 RoHS & Green SN Level-2-260C-1 YEAR -40 to 125 LM1117 Samples
IDT-ADJ
LM1117IDTX-3.3/NOPB ACTIVE TO-252 NDP 3 2500 RoHS & Green SN Level-2-260C-1 YEAR -40 to 125 LM1117 Samples
IDT-3.3
LM1117IDTX-5.0/NOPB ACTIVE TO-252 NDP 3 2500 RoHS & Green SN Level-2-260C-1 YEAR -40 to 125 LM1117 Samples
IDT-5.0
LM1117IDTX-ADJ/NOPB ACTIVE TO-252 NDP 3 2500 RoHS & Green SN Level-2-260C-1 YEAR -40 to 125 LM1117 Samples
IDT-ADJ
LM1117ILD-ADJ/NOPB ACTIVE WSON NGN 8 1000 RoHS & Green SN Level-3-260C-168 HR -40 to 125 1117IAD Samples

Addendum-Page 1
 PACKAGE OPTION ADDENDUM

www.ti.com 21-Sep-2023

Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) Ball material (3) (4/5)
(6)

LM1117IMP-3.3/NOPB ACTIVE SOT-223 DCY 4 1000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 N05B Samples

LM1117IMP-5.0/NOPB ACTIVE SOT-223 DCY 4 1000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 N06B Samples

LM1117IMP-ADJ/NOPB ACTIVE SOT-223 DCY 4 1000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 N03B Samples

LM1117IMPX-3.3/NOPB ACTIVE SOT-223 DCY 4 2000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 N05B Samples

LM1117IMPX-5.0/NOPB ACTIVE SOT-223 DCY 4 2000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 N06B Samples

LM1117IMPX-ADJ/NOPB ACTIVE SOT-223 DCY 4 2000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 N03B Samples

LM1117LD-1.8/NOPB ACTIVE WSON NGN 8 1000 RoHS & Green SN Level-3-260C-168 HR 0 to 125 1117-18 Samples

LM1117LD-2.5/NOPB ACTIVE WSON NGN 8 1000 RoHS & Green SN Level-3-260C-168 HR 0 to 125 1117-25 Samples

LM1117LD-3.3/NOPB ACTIVE WSON NGN 8 1000 RoHS & Green SN Level-3-260C-168 HR 0 to 125 1117-33 Samples

LM1117LD-ADJ/NOPB ACTIVE WSON NGN 8 1000 RoHS & Green SN Level-3-260C-168 HR 0 to 125 1117ADJ Samples

LM1117LDX-1.8/NOPB ACTIVE WSON NGN 8 4500 RoHS & Green SN Level-3-260C-168 HR 0 to 125 1117-18 Samples

LM1117LDX-ADJ/NOPB ACTIVE WSON NGN 8 4500 RoHS & Green SN Level-3-260C-168 HR 0 to 125 1117ADJ Samples

LM1117MP-1.8/NOPB ACTIVE SOT-223 DCY 4 1000 RoHS & Green SN Level-1-260C-UNLIM 0 to 125 N12A Samples

LM1117MP-2.5/NOPB ACTIVE SOT-223 DCY 4 1000 RoHS & Green SN Level-1-260C-UNLIM 0 to 125 N13A Samples

LM1117MP-3.3/NOPB ACTIVE SOT-223 DCY 4 1000 RoHS & Green SN Level-1-260C-UNLIM 0 to 125 N05A Samples

LM1117MP-5.0/NOPB ACTIVE SOT-223 DCY 4 1000 RoHS & Green SN Level-1-260C-UNLIM 0 to 125 N06A Samples

LM1117MP-ADJ/NOPB ACTIVE SOT-223 DCY 4 1000 RoHS & Green SN Level-1-260C-UNLIM 0 to 125 N03A Samples

LM1117MPX-1.8/NOPB ACTIVE SOT-223 DCY 4 2000 RoHS & Green SN Level-1-260C-UNLIM 0 to 125 N12A Samples

LM1117MPX-2.5/NOPB ACTIVE SOT-223 DCY 4 2000 RoHS & Green SN Level-1-260C-UNLIM 0 to 125 N13A Samples

LM1117MPX-3.3 LIFEBUY SOT-223 DCY 4 2000 Non-RoHS Call TI Level-1-260C-UNLIM N05A

& Green
LM1117MPX-3.3/NOPB ACTIVE SOT-223 DCY 4 2000 RoHS & Green SN Level-1-260C-UNLIM 0 to 125 N05A Samples

Addendum-Page 2
 PACKAGE OPTION ADDENDUM

www.ti.com 21-Sep-2023

Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) Ball material (3) (4/5)
(6)

LM1117MPX-5.0/NOPB ACTIVE SOT-223 DCY 4 2000 RoHS & Green SN Level-1-260C-UNLIM 0 to 125 N06A Samples

LM1117MPX-ADJ/NOPB ACTIVE SOT-223 DCY 4 2000 RoHS & Green SN Level-1-260C-UNLIM 0 to 125 N03A Samples

LM1117S-ADJ/NOPB ACTIVE DDPAK/ KTT 3 45 RoHS-Exempt SN Level-3-245C-168 HR 0 to 125 LM1117S Samples

TO-263 & Green ADJ
LM1117SX-3.3/NOPB ACTIVE DDPAK/ KTT 3 500 RoHS-Exempt SN Level-3-245C-168 HR 0 to 125 LM1117S Samples
TO-263 & Green 3.3
LM1117SX-5.0/NOPB ACTIVE DDPAK/ KTT 3 500 RoHS-Exempt SN Level-3-245C-168 HR 0 to 125 LM1117S Samples
TO-263 & Green 5.0
LM1117SX-ADJ/NOPB ACTIVE DDPAK/ KTT 3 500 RoHS-Exempt SN Level-3-245C-168 HR 0 to 125 LM1117S Samples
TO-263 & Green ADJ
LM1117T-2.5/NOPB ACTIVE TO-220 NDE 3 45 RoHS & Green SN Level-1-NA-UNLIM 0 to 125 LM1117T Samples
2.5
LM1117T-3.3/NOPB ACTIVE TO-220 NDE 3 45 RoHS & Green SN Level-1-NA-UNLIM 0 to 125 LM1117T Samples
3.3
LM1117T-5.0/NOPB ACTIVE TO-220 NDE 3 45 RoHS & Green SN Level-1-NA-UNLIM 0 to 125 LM1117T Samples
5.0
LM1117T-ADJ/NOPB ACTIVE TO-220 NDE 3 45 RoHS & Green SN Level-1-NA-UNLIM 0 to 125 LM1117T Samples
ADJ

(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.

(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.

(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

Addendum-Page 3
 PACKAGE OPTION ADDENDUM

www.ti.com 21-Sep-2023

(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.

(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

Addendum-Page 4
 PACKAGE MATERIALS INFORMATION

www.ti.com 23-Jun-2023

TAPE AND REEL INFORMATION

REEL DIMENSIONS TAPE DIMENSIONS

K0 P1

B0 W
Reel
Diameter
Cavity A0
A0 Dimension designed to accommodate the component width
B0 Dimension designed to accommodate the component length
K0 Dimension designed to accommodate the component thickness
W Overall width of the carrier tape
P1 Pitch between successive cavity centers

Reel Width (W1)

QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE

Sprocket Holes

Q1 Q2 Q1 Q2

Q3 Q4 Q3 Q4 User Direction of Feed

Pocket Quadrants

*All dimensions are nominal

Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1
Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM1117DTX-1.8/NOPB TO-252 NDP 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2
LM1117DTX-2.5/NOPB TO-252 NDP 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2
LM1117DTX-3.3/NOPB TO-252 NDP 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2
LM1117DTX-5.0/NOPB TO-252 NDP 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2
LM1117DTX-ADJ/NOPB TO-252 NDP 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2
LM1117IDTX-3.3/NOPB TO-252 NDP 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2
LM1117IDTX-5.0/NOPB TO-252 NDP 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2
LM1117IDTX-ADJ/NOPB TO-252 NDP 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2
LM1117ILD-ADJ/NOPB WSON NGN 8 1000 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LM1117IMP-3.3/NOPB SOT-223 DCY 4 1000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117IMP-5.0/NOPB SOT-223 DCY 4 1000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117IMP-ADJ/NOPB SOT-223 DCY 4 1000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117IMPX-3.3/NOPB SOT-223 DCY 4 2000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117IMPX-5.0/NOPB SOT-223 DCY 4 2000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117IMPX-ADJ/NOPB SOT-223 DCY 4 2000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117LD-1.8/NOPB WSON NGN 8 1000 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1

Pack Materials-Page 1
 PACKAGE MATERIALS INFORMATION

www.ti.com 23-Jun-2023

Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1

Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM1117LD-2.5/NOPB WSON NGN 8 1000 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LM1117LD-3.3/NOPB WSON NGN 8 1000 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LM1117LD-ADJ/NOPB WSON NGN 8 1000 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LM1117LDX-1.8/NOPB WSON NGN 8 4500 330.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LM1117LDX-ADJ/NOPB WSON NGN 8 4500 330.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LM1117MP-1.8/NOPB SOT-223 DCY 4 1000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117MP-2.5/NOPB SOT-223 DCY 4 1000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117MP-3.3/NOPB SOT-223 DCY 4 1000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117MP-5.0/NOPB SOT-223 DCY 4 1000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117MP-ADJ/NOPB SOT-223 DCY 4 1000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117MPX-1.8/NOPB SOT-223 DCY 4 2000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117MPX-2.5/NOPB SOT-223 DCY 4 2000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117MPX-3.3 SOT-223 DCY 4 2000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117MPX-3.3/NOPB SOT-223 DCY 4 2000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117MPX-5.0/NOPB SOT-223 DCY 4 2000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117MPX-ADJ/NOPB SOT-223 DCY 4 2000 330.0 16.4 7.0 7.5 2.2 12.0 16.0 Q3
LM1117SX-3.3/NOPB DDPAK/ KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
TO-263
LM1117SX-5.0/NOPB DDPAK/ KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
TO-263
LM1117SX-ADJ/NOPB DDPAK/ KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
TO-263

Pack Materials-Page 2
 PACKAGE MATERIALS INFORMATION

www.ti.com 23-Jun-2023

TAPE AND REEL BOX DIMENSIONS

Width (mm)
H
W

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM1117DTX-1.8/NOPB TO-252 NDP 3 2500 356.0 356.0 35.0
LM1117DTX-2.5/NOPB TO-252 NDP 3 2500 356.0 356.0 35.0
LM1117DTX-3.3/NOPB TO-252 NDP 3 2500 356.0 356.0 35.0
LM1117DTX-5.0/NOPB TO-252 NDP 3 2500 356.0 356.0 35.0
LM1117DTX-ADJ/NOPB TO-252 NDP 3 2500 356.0 356.0 35.0
LM1117IDTX-3.3/NOPB TO-252 NDP 3 2500 356.0 356.0 35.0
LM1117IDTX-5.0/NOPB TO-252 NDP 3 2500 356.0 356.0 35.0
LM1117IDTX-ADJ/NOPB TO-252 NDP 3 2500 356.0 356.0 35.0
LM1117ILD-ADJ/NOPB WSON NGN 8 1000 208.0 191.0 35.0
LM1117IMP-3.3/NOPB SOT-223 DCY 4 1000 367.0 367.0 35.0
LM1117IMP-5.0/NOPB SOT-223 DCY 4 1000 367.0 367.0 35.0
LM1117IMP-ADJ/NOPB SOT-223 DCY 4 1000 367.0 367.0 35.0
LM1117IMPX-3.3/NOPB SOT-223 DCY 4 2000 367.0 367.0 35.0
LM1117IMPX-5.0/NOPB SOT-223 DCY 4 2000 367.0 367.0 35.0
LM1117IMPX-ADJ/NOPB SOT-223 DCY 4 2000 367.0 367.0 35.0
LM1117LD-1.8/NOPB WSON NGN 8 1000 208.0 191.0 35.0
LM1117LD-2.5/NOPB WSON NGN 8 1000 208.0 191.0 35.0
LM1117LD-3.3/NOPB WSON NGN 8 1000 208.0 191.0 35.0

Pack Materials-Page 3
 PACKAGE MATERIALS INFORMATION

www.ti.com 23-Jun-2023

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM1117LD-ADJ/NOPB WSON NGN 8 1000 208.0 191.0 35.0
LM1117LDX-1.8/NOPB WSON NGN 8 4500 356.0 356.0 35.0
LM1117LDX-ADJ/NOPB WSON NGN 8 4500 356.0 356.0 35.0
LM1117MP-1.8/NOPB SOT-223 DCY 4 1000 367.0 367.0 35.0
LM1117MP-2.5/NOPB SOT-223 DCY 4 1000 367.0 367.0 35.0
LM1117MP-3.3/NOPB SOT-223 DCY 4 1000 367.0 367.0 35.0
LM1117MP-5.0/NOPB SOT-223 DCY 4 1000 367.0 367.0 35.0
LM1117MP-ADJ/NOPB SOT-223 DCY 4 1000 367.0 367.0 35.0
LM1117MPX-1.8/NOPB SOT-223 DCY 4 2000 367.0 367.0 35.0
LM1117MPX-2.5/NOPB SOT-223 DCY 4 2000 367.0 367.0 35.0
LM1117MPX-3.3 SOT-223 DCY 4 2000 367.0 367.0 35.0
LM1117MPX-3.3/NOPB SOT-223 DCY 4 2000 367.0 367.0 35.0
LM1117MPX-5.0/NOPB SOT-223 DCY 4 2000 367.0 367.0 35.0
LM1117MPX-ADJ/NOPB SOT-223 DCY 4 2000 367.0 367.0 35.0
LM1117SX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LM1117SX-5.0/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LM1117SX-ADJ/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

Pack Materials-Page 4
 PACKAGE MATERIALS INFORMATION

www.ti.com 23-Jun-2023

TUBE

T - Tube
height L - Tube length

W - Tube
width

B - Alignment groove width

*All dimensions are nominal

Device Package Name Package Type Pins SPQ L (mm) W (mm) T (µm) B (mm)
LM1117DT-1.8/NOPB NDP TO-252 3 75 508 20 4165.6 3.1
LM1117DT-2.5/NOPB NDP TO-252 3 75 508 20 4165.6 3.1
LM1117DT-3.3/NOPB NDP TO-252 3 75 508 20 4165.6 3.1
LM1117DT-5.0/NOPB NDP TO-252 3 75 508 20 4165.6 3.1
LM1117DT-ADJ/NOPB NDP TO-252 3 75 508 20 4165.6 3.1
LM1117IDT-3.3/NOPB NDP TO-252 3 75 508 20 4165.6 3.1
LM1117IDT-5.0/NOPB NDP TO-252 3 75 508 20 4165.6 3.1
LM1117IDT-ADJ/NOPB NDP TO-252 3 75 508 20 4165.6 3.1
LM1117S-ADJ/NOPB KTT TO-263 3 45 502 25 8204.2 9.19
LM1117T-2.5/NOPB NDE TO-220 3 45 502 33 6985 4.06
LM1117T-3.3/NOPB NDE TO-220 3 45 502 33 6985 4.06
LM1117T-5.0/NOPB NDE TO-220 3 45 502 33 6985 4.06
LM1117T-ADJ/NOPB NDE TO-220 3 45 502 33 6985 4.06

Pack Materials-Page 5
 MECHANICAL DATA
NDE0003B

www.ti.com
 MECHANICAL DATA
KTT0003B

TS3B (Rev F)
BOTTOM SIDE OF PACKAGE

www.ti.com
 MECHANICAL DATA

MPDS094A – APRIL 2001 – REVISED JUNE 2002

DCY (R-PDSO-G4) PLASTIC SMALL-OUTLINE

6,70 (0.264)
6,30 (0.248)
3,10 (0.122)
2,90 (0.114)
4
0,10 (0.004) M

7,30 (0.287) 3,70 (0.146)

6,70 (0.264) 3,30 (0.130)

Gauge Plane
1 2 3
0,25 (0.010)
0,84 (0.033) 0°–10°
2,30 (0.091)
0,66 (0.026)
0,10 (0.004) M
4,60 (0.181) 0,75 (0.030) MIN

1,70 (0.067)
1,80 (0.071) MAX 1,50 (0.059)
0,35 (0.014)
0,23 (0.009)
Seating Plane

0,10 (0.0040) 0,08 (0.003)

0,02 (0.0008)

4202506/B 06/2002

NOTES: A. All linear dimensions are in millimeters (inches).

B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion.
D. Falls within JEDEC TO-261 Variation AA.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

 PACKAGE OUTLINE
NGN0008A SCALE 3.000
WSON - 0.8 mm max height
PLASTIC SMALL OUTLINE - NO LEAD

4.1 B
A
3.9

PIN 1 INDEX AREA

4.1
3.9

PIN 1 ID
DETAIL A
PIN 1 ID

C
0.8 MAX
SEATING PLANE

0.05 0.08 C
0.00

2.2 0.05

EXPOSED SYMM
THERMAL PAD (0.2) TYP

6X 0.8
4
5

2X SYMM
9
2.4 3 0.05
SEE
DETAIL A

8
1

0.35
(0.25) 8X
0.25
(0.2) 0.6
(0.25) 8X 0.1 C A B
0.4
PIN 1 ID (0.15) 0.05 C

4214794/A 11/2019

NOTES:

1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. The package thermal pad must be soldered to the printed circuit board for thermal and mechanical performance.

www.ti.com
 EXAMPLE BOARD LAYOUT
NGN0008A WSON - 0.8 mm max height
PLASTIC SMALL OUTLINE - NO LEAD

(2.2)

8X (0.5) SYMM

1
8X (0.3) 8

SYMM 9
(3)

(1.25)
6X (0.8)
4 5

(R0.05) TYP
( 0.2) VIA
TYP (0.85)
(3.3)

LAND PATTERN EXAMPLE

EXPOSED METAL SHOWN
SCALE:15X

0.07 MAX 0.07 MIN

ALL AROUND ALL AROUND

EXPOSED EXPOSED
METAL METAL

SOLDER MASK METAL METAL UNDER SOLDER MASK

OPENING SOLDER MASK OPENING
NON SOLDER MASK
SOLDER MASK
DEFINED
DEFINED
(PREFERRED)

SOLDER MASK DETAILS

4214794/A 11/2019

NOTES: (continued)

4. This package is designed to be soldered to a thermal pad on the board. For more information, see Texas Instruments literature
number SLUA271 (www.ti.com/lit/slua271).
5. Vias are optional depending on application, refer to device data sheet. If any vias are implemented, refer to their locations shown
on this view. It is recommended that vias under paste be filled, plugged or tented.

www.ti.com
 EXAMPLE STENCIL DESIGN
NGN0008A WSON - 0.8 mm max height
PLASTIC SMALL OUTLINE - NO LEAD

0.59

SYMM METAL
8X (0.5) TYP

1
8X (0.3) 8

4X (1.31)

SYMM
9

(0.755)

6X (0.8)

5
4

(R0.05) TYP
4X (0.98)

(3.3)

SOLDER PASTE EXAMPLE

BASED ON 0.125 mm THICK STENCIL

EXPOSED PAD 9:
78% PRINTED SOLDER COVERAGE BY AREA UNDER PACKAGE
SCALE:20X

4214794/A 11/2019

NOTES: (continued)

6. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.

www.ti.com
 PACKAGE OUTLINE
NDP0003B SCALE 1.500
TO-252 - 2.55 mm max height
TRANSISTOR OUTLINE

10.42
9.40
6.22 1.27
B
5.97 0.88 A
(2.345)

2.285 (2.5)

2 5.46 6.73
4.57
4.96 6.35

3
0.88
3X 1.02 PKG
0.64 OPTIONAL
0.25 C A B 0.64

8 8
TOP & BOTTOM

1.14
0.89 C
2.55 MAX

SEATING PLANE

0.17 0.60 0.88

0.46 0.46
0.51 MIN

4.32 MIN

2 4

4219870/A 03/2018
NOTES:

1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. Reference JEDEC registration TO-252.

www.ti.com
 EXAMPLE BOARD LAYOUT
NDP0003B TO-252 - 2.55 mm max height
TRANSISTOR OUTLINE

SEE SOLDER MASK

DETAIL
2X (2.15)
2X (1.3) (5.7)

4 SYMM
(4.57) (5.5)

(R0.05) TYP
(4.38) (2.285)

PKG

LAND PATTERN EXAMPLE

EXPOSED METAL SHOWN
SCALE: 8X

METAL EDGE 0.07 MIN

0.07 MAX ALL AROUND
ALL AROUND
METAL UNDER
EXPOSED SOLDER MASK
METAL
EXPOSED
METAL
SOLDER MASK SOLDER MASK
OPENING OPENING
NON SOLDER MASK SOLDER MASK DEFINED
DEFINED
(PREFERRED)
SOLDER MASK DETAIL

4219870/A 03/2018
NOTES: (continued)

4. This package is designed to be soldered to a thermal pad on the board. For more information, see Texas Instruments literature numbers
SLMA002(www.ti.com/lit/slm002) and SLMA004 (www.ti.com/lit/slma004).
5. Vias are optional depending on application, refer to device data sheet. It is recommended that vias under paste be filled, plugged or tented.

www.ti.com
 EXAMPLE STENCIL DESIGN
NDP0003B TO-252 - 2.55 mm max height
TRANSISTOR OUTLINE

(1.35) TYP
2X (2.15)
(0.26)
2X (1.3) (R0.05) TYP

(1.32) TYP

(4.57)

16X (1.12)

16X (1.15)
(4.38)

PKG

SOLDER PASTE EXAMPLE

BASED ON 0.125 MM THICK STENCIL
SCALE: 8X

4219870/A 03/2018

NOTES: (continued)

6. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
7. Board assembly site may have different recommendations for stencil design.

www.ti.com
 IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, regulatory or other requirements.
These resources are subject to change without notice. TI grants you permission to use these resources only for development of an
application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license
is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you
will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these
resources.
TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with
such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for
TI products.
TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2023, Texas Instruments Incorporated