Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 51 views

    Engineering Graphics Assignment Long Questions Unit-I

    Uploaded by

    shaikamaan10jgs18080006
    This document contains 20 engineering graphics assignment questions involving the construction of various curves like circles, ellipses, hyperbolas, parabolas, involutes, epicycloids using different methods. The questions require constructing regular polygons, drawing tangents and normals to curves, marking lengths on scales, finding loci of rolling circles and determining eccentricities. Construction of curves involves specifying dimensions like diameters, axes lengths, distances between foci and directrix, and drawing tangents and normals at given points on the curves.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Engineering Graphics Assignment Long Questions Unit-I

    Uploaded by

    shaikamaan10jgs18080006
    51 views2 pages
    This document contains 20 engineering graphics assignment questions involving the construction of various curves like circles, ellipses, hyperbolas, parabolas, involutes, epicycloids using different methods. The questions require constructing regular polygons, drawing tangents and normals to curves, marking lengths on scales, finding loci of rolling circles and determining eccentricities. Construction of curves involves specifying dimensions like diameters, axes lengths, distances between foci and directrix, and drawing tangents and normals at given points on the curves.

    Original Title

    17 18

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 20 engineering graphics assignment questions involving the construction of various curves like circles, ellipses, hyperbolas, parabolas, involutes, epicycloids using different methods. The questions require constructing regular polygons, drawing tangents and normals to curves, marking lengths on scales, finding loci of rolling circles and determining eccentricities. Construction of curves involves specifying dimensions like diameters, axes lengths, distances between foci and directrix, and drawing tangents and normals at given points on the curves.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    51 views2 pages

    Engineering Graphics Assignment Long Questions Unit-I

    Uploaded by

    shaikamaan10jgs18080006
    This document contains 20 engineering graphics assignment questions involving the construction of various curves like circles, ellipses, hyperbolas, parabolas, involutes, epicycloids using different methods. The questions require constructing regular polygons, drawing tangents and normals to curves, marking lengths on scales, finding loci of rolling circles and determining eccentricities. Construction of curves involves specifying dimensions like diameters, axes lengths, distances between foci and directrix, and drawing tangents and normals at given points on the curves.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    ENGINEERING GRAPHICS

    ASSIGNMENT LONG QUESTIONS


    UNIT-I

    1. Inscribe regular polygons of 4, 5, 6, and 7 sides, in a circle of 75 mm


    diameter.
    2. a) Construct a regular polygon of eight sides, with the length of the side as
    40 mm by any one method.
    b) Construct an ellipse, with the distance of the focus from the directrix as 60
    mm and eccentricity as 2/3. Also draw normal and tangent at any point P on
    the curve.
    3. a) Construct a hyperbola, with the distance of the focus from the directrix as
    45mm and eccentricity as 3/2. Draw normal and tangent at any point P on the
    curve.
    b) Construct a parabola when the distance between focus and directrix is 50
    mm. Draw normal and tangent at any point P on the curve.
    4. a) Construct a regular polygon of five and six sides, with the length of the
    side as 30mm by any one method.
    b) The major and minor axis of an ellipse is 100 mm and 70 mm. Draw an
    ellipse by using arcs of circles method. Also draw normal and tangent at any
    point P on the curve.
    5. Draw an ellipse by using (1) concentric circles method and (ii) Oblong
    method, when the major and minor axes of an ellipse are 100 mm and 70 mm.
    Also draw normal and tangent at any point P on the curve.
    6. Construct a hyperbola with its foci, 70 mm apart and the major axis 45 mm
    Draw tangents to the curve at a point 20 mm from the focus. Also, determine
    the eccentricity of the curve.
    7. A fixed point is 75 cm from a fixed straight line Draw the locus of a point
    moving in such a way that its distance from the fixed straight line is equal to its
    distance from Name the curve Draw normal and tangent at a point 6 cm from P.

    8. The major and minor axes of an ellipse are 140 mm and 70 mm respectively
    Find the foci and draw the ellipse by following methods and draw a normal and
    tangent to the ellipse at a point 35 mm above the major axis. a) oblong method
    and b) Arcs of circle method.
    9. Construct a regular pentagon of side 30 mm by three different methods.
    10. Construct a regular pentagon of side 35 mm and a regular octagon of side
    35 mm.
    11. The vertex of a hyperbola is 65 mm from its focus Draw the curve if the
    eccentricity in 3/2 Draw a normal and tangent at a point on the curve, 75mm
    from the directrix.
    12. Construct an ellipse, with the distance of the focus from the directrix as 50
    mm and eccentricity as 2/3. Also draw normal and tangent to the curve, at a
    point 40 mm from the directrix.
    13. Construct a hyperbola, with the distance of the focus from the directrix as
    50 mm and eccentricity as 3/2. Also draw normal and tangent to the curve, at a
    point 30 mm from the directrix.
    14. The major and minor axes of an ellipse are 120 mm and 80 mm. Draw an
    ellipse. 1 foci or arcs of circles method.
    15. The major and minor axes of an ellipse are 120mm and 80mm by circles
    method.
    16.Draw the involute of a circle of 40 mm diameter. Also, draw a tangent and a
    normal to the curve at a point 95mm from the centre of the circle.
    17. Construct a scale of 1: 8, to show decimetres and centimetres and to read
    up to 1m. Show a length of 7.6 dm on it.
    18. Construct a diagonal scale of S.F =1/ (2.5 x 10°) to read up to a single
    kilometre and long enough to measure 400 km. Mark a length of 254 km on it.
    19. A circle of 40mm diameter, rolls along a line for one revolution clock-wise.
    Draw the locus of a point on the circle, which is in contact with the line. Also,
    draw a tangent and a normal to the curve, at a point 35mm from the directing
    line.
    20. Draw an epi-cycloid of a circle of 40mm diameter, which rolls outside on
    another circle of 150 mm diameter for one revolution clock-wise. Draw a
    tangent and a normal to it at a point 95mm from the centre of the directing
    circle.

    You might also like