Flow Meter Tech Specs F113AI

DATASHEET F-113AI
IN-FLOW F-113AI
Industrial Style Thermal Mass Flow Meter for Gases
Industrial Style Gas Mass Flow Meters for higher ow rates
Bronkhorst® model F-113AI Mass Flow Meters (MFMs) are suited for precise measurement of ow ranges between 4…200 l n/min and 8…1600 ln/min
with pressure rating between vacuum and 100 bar. The MFM consists of a thermal mass ow sensor and a microprocessor based pc-board with signal
and eldbus conversion and a PID controller for optional mass ow control by means of a separately mounted control valve. The IN-FLOW model is of
rugged design (IP65) for use in industrial environments or even Zone 2 hazardous areas, with optional ATEX Cat. 3 or FM Class I, Div. 2 approval.
IN-FLOW series are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. The main digital pc-
board contains all of the general functions needed for measurement and control. In addition to the standard RS232 output the instruments also offer
analog I/O. As an option, an on-board interface can be mounted to provide CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU,
ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS protocols. The IN-FLOW model features optional Multi Gas / Multi Range functionality,
providing (OEM-) customers with optimal exibility and process efficiency.
Technical speci cations
Measurement / control system
Flow range (intermediate ranges min. 4…200 ln/min

available) max. 8…1600 ln/min
(based on N2)
Accuracy (incl. linearity) (based on ±0,5% Rd plus ±0,1% FS

actual calibration)
Repeatability < 0,2 % RD
Turndown ratio up to 1:187,5 (1:50 in analog mode)
Multi uid capability storage of max. 8 calibration curves;

optional Multi Gas / Multi Range functionality up to 10 bar abs
Response time (sensor) typical: 0,5 sec.
Operating temperature -10 …+70 °C

for ATEX cat. 3 and FM Class 1 Div 2 : 0…50°C
Temperature sensitivity zero: < 0,05% FS/°C; span: < 0,05% Rd/°C
Pressure sensitivity 0,1% Rd/bar typical N2; 0,01% Rd/bar typical H2
Leak integrity, outboard tested < 2 x 10-9 mbar l/s He
Attitude sensitivity max. error at 90° off horizontal 0,2% FS at 1 bar, typical N2
Warm-up time 30 min. for optimum accuracy

2 min. for accuracy ± 2% FS
Mechanical parts
Material (wetted parts) stainless steel 316L or comparable
Pressure rating (PN) 100 bar abs
Process connections compression type or face seal couplings
Seals standard: FKM/Viton®;

options: EPDM, FFKM/Kalrez®, FDA and USP Class VI approved compounds
Weight 3,3 kg
Ingress protection IP65
Electrical properties
Power supply +15 … 24 Vdc
Max. power consumption meter Supply at voltage I/O at current I/O extra for eldbus
15 V 95 mA 125 mA <75 mA
24 V 65 mA 85 mA <50 mA
Max. Power consumption Supply at voltage I/O at current I/O extra for eldbus
controller 15 V 290 mA 320 mA <75 mA
24 V 200 mA 215 mA <50 mA
Analog output 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output)
Digital communication standard: RS232;

options: CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII or TCP/IP,
EtherNet/IP, POWERLINK or FLOW-BUS
Electrical connection
Analog/RS232 8 DIN (male);
PROFIBUS DP bus: 5-pin M12 (female);

power: 8 DIN (male);
CANopen® / DeviceNet™ 5-pin M12 (male);
FLOW-BUS/Modbus-RTU/ASCII 5-pin M12 (male)
Modbus TCP / EtherNet/IP / bus: 2 x 5-pin M12 (female) (in/out);

POWERLINK power: 8 DIN (male);
EtherCAT®/ PROFINET bus: 2 x 5-pin M12 (female) (in/out);

power: 8 DIN (male);
IEC 61010-1 IEC-61010-1:2010 including national deviations for UL (61010-1:2012) and CSA (C22.2 No. 61010-1-12)
Control valve options
External actuator options to be connected to the controller
Ex-proof speci cations
Approvals / certi cates

Technical speci cations subject to change without notice.
For dimensional drawings and hook-up diagrams please visit the product page on our website
Recommended accessories
E-8000 SERIES BRIGHT SERIES PIPS SERIES IN-LINE FILTER

HIGH FLOW SERIE M-
Digital Readout / Control Compact Local R/C Module Plug-in Power Supply 423
Systems Bright, wide angle, 1.8" For lab-style or
Bright, wide angle, 1.8” display industrial devices 1/2" female in / male out
display (TFT technology) User friendly operation Interchangeable plugs 200 bar
User friendly operation, Indication/operation/con guration (Euro, UK, USA,
Average porosity 2...40
menu driven with 4 Australian, IEC) for
µm
push buttons mains connection
Related products
IN-FLOW F-112AI IN-FLOW 'HIGH-FLOW' F- IN-FLOW F-203AI

116AI
Min. ow 0,8…40 ln/min Min. ow 0,3 ... 15 m3n/h Min. ow 4…200 ln/min
Max. ow 1,4…250 Max. ow 4 ... 200 m3n/h Max. ow 33…1670
ln/min Pressure rating 100 bar ln/min
Pressure rating 100 bar Compact IP65 design Pressure rating 64 bar
Compact IP65 design High accuracy Compact IP65 design
High accuracy High accuracy and
repeatability
Bronkhorst High-Tech designs and manufactures innovative instruments and subsystems for low- ow measurement and control for
use in laboratories, machinery and industry. Driven by a strong sense of sustainability and with many years of experience, we offer an
extensive range of (mass) ow meters and controllers for gases and liquids, based on thermal, Coriolis and ultrasonic measuring
principles. Our global sales and service network provides local support in more than 40 countries. Discover Bronkhorst®!
www.bronkhorst.com

Flow Meter Tech Specs F113AI

Uploaded by

Copyright:

Available Formats

Flow Meter Tech Specs F113AI

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Flow Meter Tech Specs F113AI

Uploaded by

Copyright:

Available Formats

DATASHEET F-113AI

Industrial Style Gas Mass Flow Meters for higher ow rates

Technical speci cations

Measurement / control system

Flow range (intermediate ranges min. 4…200 ln/min

Accuracy (incl. linearity) (based on ±0,5% Rd plus ±0,1% FS

Repeatability < 0,2 % RD

Turndown ratio up to 1:187,5 (1:50 in analog mode)

Multi uid capability storage of max. 8 calibration curves;

Response time (sensor) typical: 0,5 sec.

Operating temperature -10 …+70 °C

Pressure sensitivity 0,1% Rd/bar typical N2; 0,01% Rd/bar typical H2

Leak integrity, outboard tested < 2 x 10-9 mbar l/s He

Attitude sensitivity max. error at 90° oﬀ horizontal 0,2% FS at 1 bar, typical N2

Warm-up time 30 min. for optimum accuracy

Material (wetted parts) stainless steel 316L or comparable

Pressure rating (PN) 100 bar abs

Process connections compression type or face seal couplings

Seals standard: FKM/Viton®;

Ingress protection IP65

Power supply +15 … 24 Vdc

Analog output 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output)

Digital communication standard: RS232;

Analog/RS232 8 DIN (male);

PROFIBUS DP bus: 5-pin M12 (female);

CANopen® / DeviceNet™ 5-pin M12 (male);

FLOW-BUS/Modbus-RTU/ASCII 5-pin M12 (male)

Modbus TCP / EtherNet/IP / bus: 2 x 5-pin M12 (female) (in/out);

EtherCAT®/ PROFINET bus: 2 x 5-pin M12 (female) (in/out);

Control valve options

External actuator options to be connected to the controller

Ex-proof speci cations

Approvals / certi cates

E-8000 SERIES BRIGHT SERIES PIPS SERIES IN-LINE FILTER

IN-FLOW F-112AI IN-FLOW 'HIGH-FLOW' F- IN-FLOW F-203AI

You might also like