Data Sheet

Cartridge pressure switch

Type ACB and CCB

Fixed setpoints

Pressure controls ACB and CCB are compact

disc type pressure switches with fixed set-
points for long-standing use in refrigeration
and air conditioning systems. They provide
automatic or manual reset limit protection.

The small size, lightness and high degree of

protection means that it can be mounted
directly on the refrigeration systems.

The cartridge switch is available with different

pressure settings and pressure connections to
suit customer requirements.

All these features reduce installation costs and

save space.

Features:
• Wide range
• Fixed pressure set points
• Automatic or manual reset
• Various port fittings for soldering or direct
mounting
• Spades or cables
• Stripped ends or customer specific electrical
plug
• Open or water-proof (IP65) version
• Type ACB for use as high and low pressure cut
in and cut out as well as fan cycling
• Type CCB available for CO2 refrigerants
• Compact design and easy to install

AI224286438133en-000901
Cartridge pressure switch, type ACB and CCB

Applications

Air conditioning and refrigeration

Figure 1: Air conditioning and refrigeration
2 1 High Pressure
1 2 Fan Control
3
3 Condenser
4 Compressor
7
5 Low Pressure

5
6 Evaporator
4
7 Expansion valve
6

• Condenser fan switch

• Compressor stop – start
• Pump-down switch
• Low Pressure safety pressure switch
• High Pressure safety pressure switch

Product specification

Technical data
Table 1: Technical data
ACB CCB
Type
Water-proof (W) Open – spade connector (O) Water-proof (W)
R22, R134a, R404A, R407C, R407F, R410A, R438A, R448A, R449A, R452A, R513A.
For flammable refrigerants please contact your nearest Danfoss office. For com-
Medium R744 (CO2)
plete list of approved refrigerants, visit www.products.danfoss.com and search for
individual code numbers, where refrigerants are listed as part of technical data
Range -0.5 – 45 bar / -7 – 652 psi 100 – 150 bar / 1450 – 2176 psi
Reset Automatic, Manual Automatic
Contact function SPST-NO, SPST-NC, SPDT SPST-NC
Electrical connections AWG18 cables Spades (size 6.35mm x 0.8 mm) AWG18 cables
Cable length 150 cm (black) - 150 cm (black)
6 A @ 250 V AC for SPST
Contact load variants 4 A @ 250 V AC for SPDT -
0,01 - 0,05 A @ 12/24 V DC
1⁄4 in ODM solder
6 mm ODM solder
Pressure connections 6.35 mm solder
1⁄4 in SAE female flare
with depressure pin
Maximum working pressure PS / MWP 45 bar / 650 psi 165 bar / 2393 psi
Burst pressure 140 bar / 2030 psi 375 bar / 5440 psi
Media temperature – 55 – 135 °C / –67 – 275 °F – 30 – 100 °C / –20 – 210 °F
Ambient temperature –30 – 85 °C / -20 – 185 °F
Enclosure IP65 No electrical protection IP65

Customer specific features are available in a wide selection.

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 2

Cartridge pressure switch, type ACB and CCB

Lifetime
Switch type:
SPST auto reset, Normally open
Pressure setting : max 3 MPa

As general rule, ACB pressure switches are capable to cover applications requiring cycling from 100000 to 1500000
cycles dependent on current load. The exact number of cycles in any of given application is to be determined by
appropriate testing.

Manufacturer reserves the right to change or modify specifications at any time without prior notice.

C Number of cycles

60N9020
Danfos
L Electrical load
L

0 500000 1000000 1500000

C

SPST auto reset, Normally close – up to 100000 cycles

SPST manual reset, Normally close – 10000 cycles
SPDT auto reset – up to 100000 cycles
SPDT manual reset – 10000 cycles

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 3

Cartridge pressure switch, type ACB and CCB

Specification build up Type ACB

Upper activation setting [bar guage]

Lower activation setting [bar guage]

Details of special features (if any)

Mark if additional specifications
Tolerance on upper setting [bar]

Tolerance on low setting [bar]

Electrical connection

Cable lenght in cm
Electrical rating

Port fitting

Cable plug
Approvals

Enclosure

Housing
Product

Contact

Reset
Requested specs:
Example: ACB 2U B 1 W A R L 20,0 1,0 15,0 1,5 A 100 0

Field Code Explanation

Product

Electrical rating
1U 1A @ 250V AC
2U 6A @ 250V AC (SPST), 4A @ 250V AC (SPDT)
4U 0,05A @ 12/24V DC (gold contacts)

Contact
A SPST-NO
B SPST-NC
C SPDT
Approvals
0 CE [category II] approval
1 CE [category II + IV], TÜV, VDE, UL & C-UL approvals (only with ACB)
2 UL & C-UL approvals (only with ACB)
3 CE [category II + IV] approval (only with ACB)
Enclosure
O Open
W Waterproof IP65 (only with cables)
Reset
A Automatic
M Manual (not SPST-NO; SPDT only in Panel mount housing)
Housing
R Regular hot-melt
E Epoxy type
P Panel mount (mandatory for SPDT Manual reset versions)

Port fitting
M 1/4” SAE female flare w. deflator
V 1/4” SAE female flare w. 1mm deflator
H 1/4” SAE male flare
P 1/4” solder Cu-tube (tip = 3 mm)
X 1/4” solder Cu-tube (tip = 7 mm)
S 1/4” solder Cu-tube (no tip)
L 6 mm solder Cu-tube (tip = 7mm)
E 1/8-27 NPT male
Y R (PT) 1/8”

Upper activation setting [bar guage]

--,-
Tolerance on upper setting [bar]
-,- +/- indicated value
Lower activation setting [bar guage]
--,-
Tolerance on low setting [bar]
-,- +/- indicated value
Electrical connection
A AWG18 cables
B AWG16 cables
C AWG18 (UL 3173) cables
S 90 deg. spades
D Double insulated AWG18 cables
V Double insulated H05VV5-F 2-in-1 cable (on request only, E housing only, Automatic reset only)
R Double insulated H05RNF 2-in-1 cable (on request only, E housing only, Automatic reset only)
P AWG18 with PVC tube
H AWG18 halogen free (RoHS compliant, currently E housing only)
Cable lenght in cm
--- Please use one of standard lengths: 020, 050, 080, 100, 150, 200 & 250 cm
Cable plug
(Leave blank if no cable)
0 Cut ends
Faston A A1: AMP 170213-2, A2: AMP 170213-2, A3: OBR#250, A4: AMP 735222-2+AMP 735222-2, A5: AMP 170183-2, A6: AMP 170213-2
AMP B B1: AMP 350777-1, B2: AMP 282080-1, B3: AMP 282104-1, B4: AMP 192167-2, B5: AMP 881772-1, B6: AMP 174354-2
Molex M M1: 5557-02R
Pin connector P P1: Phoenix 3200250, P2: AMP 350218-1, P3: AMP 170213-2+AMP 926933-1, P4: AMP 926882-1, P5: AMP 165590-1
Packard Q Q1: 12010973, Q2: 12015792, Q3: 15300002, Q4: 15300027, Q5: 12020829
Stripped end S S1: stripped ends 15mm, S2: stripped ends 10mm
VHR V V1: VHR-2N, V2: VHR-3N
WAGO W W1: 231-302/026-000, W2: 769-102/021-000
Additional features
Leave blank if no additional specifications
X Please specify (clear text attachment)
Details of special features (if any)

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 4

Cartridge pressure switch, type ACB and CCB

Electrical connections
Table 2: Electrical connections
SPDT SPDT with manual reset SPST NO SPST NC SPST with manual reset

C C C C C
p p p p p
H L H L L H H
61F010.10
Danfoss

SPST - Single Pole Single Throw

SPDT - Single Pole Double Throw
(NO) - Normally Open
(NC) - Normally Closed

Design
Figure 2: ACB - SPST manual reset
1 1 Wires
2 Reset button
2
3 Water-proof casing
3
4 Diaphragm

4
5 Pressure connection (1⁄4 in female flare)
6 Electrical terminals
5
7 Micro-switch
8 Shaft
9 Depressure pin

7 8
9

As pressure is applied through the connection on to the diaphragm, the diaphragm is pushed up against the
operation shaft.

When the operation shaft rises, it pushes up the contact plate, so that contacts become connected (in normally
open) or disconnected (in normally closed).

As the pressure in the connection decreases, the diaphragm returns to its original state, and the operation shaft
lowers, causing the contact plate to return to its original position.

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 5

Cartridge pressure switch, type ACB and CCB

Dimensions [mm] and weights [kg]

Table 3: Type ACB – SPST water-proof
With automatic reset 1⁄4 in solder type With automatic reset female flare
φ23.5
HEAT PROOF ELECTRIC VINYL WIRE
UL1015, AWG18, 105 °C (BLACK)
φ23.5

1500 ±50
HEAT PROOF ELECTRIC VINYL WIRE
UL3173, AWG18, 125 °C (BLACK)

2500 ±80
LABEL

33
24
LABEL

33
24
58.2

16.4 ±1.5
HEX 14
7/16-20 UNF FOR FLARE
Danfoss
61F015

With Depressor pin

3

φ6.35 ±0.1
Danfoss
61F014

(φ8)
Net weight: 0.072 kg Net weight: 0.080 kg

Table 4: Type ACB – SPST water-proof

With manual reset 6 mm solder type With automatic reset 6 mm solder type
φ23.5
φ24±0.5 HEAT PROOF ELECTRIC VINYL WIRE
(φ8) UL1015, AWG18, 105 °C (BLACK)
HEAT PROOF ELECTRIC VINYL WIRE
UL1015, AWG18, 105 °C (BLACK)

780 ±30
1000±50

RESET BUTTON

LABEL
LABEL 33
32±1

24

φ6.35 ±0.1
φ6.35±0.1
58.2
59
7

φ6±0.1
Danfoss
61F004

(φ7) φ6 ±0.1
Danfoss
61F016

(φ7)
Net weight: 0.078 kg Net weight: 0.072 kg

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 6

Cartridge pressure switch, type ACB and CCB

Table 5: Type ACB – SPDT

With automatic reset With manual reset
HEAT PROOF ELECTRIC VINYL WIRE
UL1015, AWG18, 105 °C( =1500±50) 30
AWM HALOGEN FREE CABLE
UL3266, AWG18, 125 °C,300 V ( =1000±50) BLACK BLUE
M4×0.7
BLUE BLACK

10
RED
RED 39
13
φ25.4

LABEL

15
LABEL

4
50.4

53.4
16.4

16.4
HEX 14
7/16-20 UNF FOR FLARE
Danfoss
61F006

With Depressor pin HEX 14

7/16-20 UNF FOR FLARE
Danfoss
61F007

With Depressor pin

Net weight: 0.114 kg Net weight: 0.112 kg

Table 6: Type ACB – SPDT open type

Solder type With female flare
0.41"{10.5}

FASTON TERMINAL φ0.85"{φ21.7}

3-#250

LABEL
C
0.76"{19.2}
3.51"{89.1}
2.32"{59}

Danfoss
61F010
0.12"{3}

φ0.25"{φ6.35}
Danfoss
61F008

(φ0.31"{φ8})
Net weight: 0.024 kg Net weight: 0.029 kg

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 7

Cartridge pressure switch, type ACB and CCB

Table 7: Type CCB - SPST water proof

With automatic reset 6.35 mm solder type
HEAT PROOF ELECTRIC VINYL WIRE
UL1015, AWG18, 105°C (BLACK)

1500±50
(24.5)

44±2
LABEL

57.7±2
+1
80
Danfoss
61F001

φ6.35±0.1
Net weight 0.125 kg

Ordering

Standard models
Type ACB
Table 8: High pressure cut out
Cut out Cut in Contact system / enclosure Connection type
type W-water-proof types
Solder Flare
Reset with cable (IP65) O-open
[bar] [psi] [bar] [psi] (spade connector) types / no 7⁄16-20 UNF with de‐
6 mm 1⁄4 in
cable (IP00) pressure pin
061F7504 061F7505 061F7506
SPST-NC / W
ACB-2UB504W ACB-2UB505W ACB-2UB506W
18 ± 0.7 / 260 ± 10 13 ± 1.2 / 190 ± 17
061F9057
Auto. SPDT / W – –
ACB-2UC59W
061F8710 061F8708
20 ± 1 / 290 ± 14 16 ± 1.5 / 230 ± 21 SPST-NC / O –
ACB-2UB210 ACB-2UB208
061F8494
SPST-NC / W – –
ACB-2UB465W
061F8707 061F8703
Auto. SPST-NC / O –
ACB-2UB207 ACB-2UB203
23 ± 0.7 / 335 ± 10 19 ± 1.2 / 275 ± 17
061F9056
– –
ACB-2UC58W
SPDT / W
061F9243
Man. – –
ACB-2UC63MW
061F7507 061F7508 061F7509
SPST-NC / W
ACB-2UB507W ACB-2UB508W ACB-2UB509W
Auto.
061F8705 061F8701
SPST-NC / O –
ACB-2UB205 ACB-2UB201
26 ± 1 / 380 ± 15 20 ± 1.5 / 290 ± 22
061F9703 061F9714 061F9713
Man. SPST-NC / W
ACB-2UB803MW ACB-2UB814MW ACB-2UB813MW
061F9055
Auto. SPDT / W – –
ACB-2UC57W
061F7510 061F7513 061F7514
Auto.
ACB-2UB510W ACB-2UB513W ACB-2UB514W
SPST-NC / W
061F9522
Man. – –
ACB-2UB327MW
061F8704 061F8700
Auto. 28 ± 1 / 405 ± 14 21 ± 1.5 / 305 ± 22 SPST-NC / O –
ACB-2UB204 ACB-2UB200
061F9054
Auto. SPDT / W – –
ACB-2UC56W
061F9242
Man. SPDT / W – –
ACB-2UC62MW

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 8

Cartridge pressure switch, type ACB and CCB

Cut out Cut in Contact system / enclosure Connection type

type W-water-proof types
Solder Flare
Reset with cable (IP65) O-open
[bar] [psi] [bar] [psi] (spade connector) types / no 7⁄16-20 UNF with de‐
6 mm 1⁄4 in
cable (IP00) pressure pin
061F8493 061F8492
SPST-NC / W –
ACB-2UB464W ACB-2UB463W
061F8706 061F8702
Auto. 31 ± 1 / 405 ± 14 24 ± 1.5 / 350 ± 22 SPST-NC / O –
ACB-2UB206 ACB-2UB202
061F9053
SPDT / W – –
ACB-2UC55W
061F7515 061F7516 061F7517
Auto.
ACB-2UB515W ACB-2UB516W ACB-2UB517W
SPST-NC / W
061F9575
Man. 42 ± 1.2 / 610 ± 17 33 ± 2 / 480 ± 29 – –
ACB-2UB461MW
061F9052
Auto. SPDT / W – –
ACB-2UC54W

 NOTE:
Other code numbers are available upon request.

Table 9: Low pressure control

Cut out Cut in Contact system / enclosure Connection type
type W-water-proof types
Solder Flare
Reset with cable (IP65) O-open
[bar] [psi] [bar] [psi] (spade connector) types / no 7⁄16-20 UNF with de‐
6 mm 1⁄4 in
cable (IP00) pressure pin
061F7518 061F7519 061F7520
SPST-NO / W
ACB-2UA518W ACB-2UA519W ACB-2UA520W
061F7402 061F7400
Auto. 0.5 ± 0.4 / 7 ± 6 1.5 ± 0.5 / 22 ± 4 SPST-NO / O –
ACB-2UA152 ACB-2UA150
061F9106 061F9102
SPDT / O –
ACB-2UC106 ACB-2UC102
061F7521 061F7522 061F7523
SPST-NO / W
ACB-2UA521W ACB-2UA522W ACB-2UA523W
Auto. 0.7 ± 0.5 / 10 ± 7 1.7 ± 0.4 / 25 ± 6
061F9058
SPDT / W – –
ACB-2UC60W
061F7524 061F7525 061F7526
Auto. 1.7 ± 0.5 / 25 ± 7 2.7 ± 0.4 / 39 ± 6 SPST-NO / W
ACB-2UA524W ACB-2UA525W ACB-2UA526W
061F7418
Auto. 2.2 ± 0.3 / 32 ± 4.5 3.4 ± 0.3 / 50 ± 4.5 SPST-NO / W – –
ACB-2UA711W

Table 10: Fan control

Cut out Cut in Connection type
Contact system / enclosure type
W-water-proof types with cable Solder Flare
Reset
[bar] [psi] [bar] [psi] (IP65) O-open (spade connector)
7/16-20 UNF with de‐
types / no cable (IP00) 6 mm 1⁄4 in
pressure pin
061F8491
8.5 ± 1.2 / 125 ± 17 11 ± 0.8 / 160 ± 12 – 061F8490 ACB-2UA392W
ACB-2UA393W
Auto. SPST-NO / W
061F8334
13 ± 1.5 / 190 ± 22 16 ± 1 / 230 ± 14 – 061F8333 ACB-2UA305W
ACB-2UA306W

Type CCB
Figure 3: Type CCB
61F8025.10
Danfoss

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 9

Cartridge pressure switch, type ACB and CCB

Table 11: High pressure control

Cut out Cut in Connection type
Contact system / enclosure type W-
Reset Solder 6.35 mm
[bar] [psi] [bar] [psi] water-proof types with cable (IP65)
Packing 100 pcs. Packing 20 pcs.
061F9808 061F9908
100±10 / 1450±145 70±20 / 1015±290
CCB-2UB03W CCB-2UB03W
061F9809 061F9909
110±10 / 1595±145 80±20 / 1160±290
CCB-2UB04W CCB-2UB04W
061F9810 061F9910
120±10 / 1740±145 90±20 / 1305±290
CCB-2UB05W CCB-2UB05W
Auto. SPST-NC / W
061F9811
130±10 / 1885±145 100±20 / 1450±290 –
CCB-2UB06W
061F9812
140±10 / 2030±145 100±20 / 1450±290 –
CCB-2UB07W
061F9813
150±10 / 2175±145 100±20 / 1450±290 –
CCB-2UB08W

Accessories
Figure 4: Rubber plug

A wide variety of cartridge switches are available with open enclosure - no electric protection. For these switches a
water-proof rubber plug has been specially designed.

When the plug is installed on the switch a water-proof seal IP64 is obtained. The water-proof rubber plug is available
with many different cable lengths.

Table 12: Accessories

Standard cable length [m](1) Packing quantity Code no.
2.5 100 061F1302
6 100 061F1304

(1)
Other cable lengths available upon request.

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 10

Cartridge pressure switch, type ACB and CCB

Certificates, declarations, and approvals

The list contains all certificates, declarations, and approvals for this product type. Individual code number may have
some or all of these approvals, and certain local approvals may not appear on the list.

Some approvals may change over time. You can check the most current status at danfoss.com or contact your local
Danfoss representative if you have any questions.

Table 13: Certificates, declarations, and approvals

File name Document type Document topic Approval_authority
UA.1O146.D.00075-19 UA Declaration EMCD/LVD LLC CDC EURO TYSK
Saginomiya 02-16 Manufacturers Declaration China RoHS Danfoss
RU Д-DK.ГА02.В.03367 EAC Declaration EMC EAC
RU C-DK.БЛ08.В.00063_18 Electrical - Safety Certificate EMC/LVE EAC
01 202 931 Q-04 0018 Quality - Assurance Certificate PED TÜV
01 202 973-B-17-0002 Pressure - Safety Certificate - TÜV

• CE according to EN 12263
• Technical Inspection Association TÜV TUV certificate no. 01 202 931/Q-04 0018 and 01 202 971/B-17-0002
• Low Voltage Directive 2014/35/EU
• UL recognized (type ACB only):
◦ UL 873 and CSA C22.2 No. 24-93
◦ UL 121201 and CSA C22/2 No.213-17 (for flammable refrigerants only)

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 11

 Online support

Danfoss offers a wide range of support along with our products, including digital product information, software,
mobile apps, and expert guidance. See the possibilities below.

The Danfoss Product Store

The Danfoss Product Store is your one-stop shop for everything product related—no matter where
you are in the world or what area of the cooling industry you work in. Get quick access to essential
information like product specs, code numbers, technical documentation, certifications, accessories,
and more.
Start browsing at store.danfoss.com.

Find technical documentation

Find the technical documentation you need to get your project up and running. Get direct access to
our official collection of data sheets, certificates and declarations, manuals and guides, 3D models
and drawings, case stories, brochures, and much more.

Start searching now at www.danfoss.com/en/service-and-support/documentation.

Danfoss Learning
Danfoss Learning is a free online learning platform. It features courses and materials specifically
designed to help engineers, installers, service technicians, and wholesalers better understand the
products, applications, industry topics, and trends that will help you do your job better.

Create your Danfoss Learning account for free at www.danfoss.com/en/service-and-support/learning.

Get local information and support

Local Danfoss websites are the main sources for help and information about our company and
products. Find product availability, get the latest regional news, or connect with a nearby expert—all
in your own language.

Find your local Danfoss website here: www.danfoss.com/en/choose-region.

Coolselector®2 - find the best components for you HVAC/R system

Coolselector®2 makes it easy for engineers, consultants, and designers to find and order the best
components for refrigeration and air conditioning systems. Run calculations based on your operating
conditions and then choose the best setup for your system design.

Download Coolselector®2 for free at coolselector.danfoss.com.

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its
products without notice. This also applies to products already on order provided that such alterations can be made without subsequential
changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and
the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

© Danfoss | Climate Solutions | 2021.03 AI224286438133en-000901 | 12