Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 25 views

    Control System Training: FT8 Vibration Alarms

    Uploaded by

    enriquetur12
    This document provides an overview of vibration monitoring for a gas turbine control system. It describes vibration alarms for different turbine components including the low pressure rotor, collector box, high pressure rotor, water injection system, power turbine rotor, and generator shaft. Thresholds are provided for alarm and trip levels for each monitoring point to detect issues needing attention or system shutdown.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Control System Training: FT8 Vibration Alarms

    Uploaded by

    enriquetur12
    25 views15 pages
    This document provides an overview of vibration monitoring for a gas turbine control system. It describes vibration alarms for different turbine components including the low pressure rotor, collector box, high pressure rotor, water injection system, power turbine rotor, and generator shaft. Thresholds are provided for alarm and trip levels for each monitoring point to detect issues needing attention or system shutdown.

    Original Title

    bn

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides an overview of vibration monitoring for a gas turbine control system. It describes vibration alarms for different turbine components including the low pressure rotor, collector box, high pressure rotor, water injection system, power turbine rotor, and generator shaft. Thresholds are provided for alarm and trip levels for each monitoring point to detect issues needing attention or system shutdown.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    25 views15 pages

    Control System Training: FT8 Vibration Alarms

    Uploaded by

    enriquetur12
    This document provides an overview of vibration monitoring for a gas turbine control system. It describes vibration alarms for different turbine components including the low pressure rotor, collector box, high pressure rotor, water injection system, power turbine rotor, and generator shaft. Thresholds are provided for alarm and trip levels for each monitoring point to detect issues needing attention or system shutdown.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 15

    Control System Training

    FT8 Vibration Alarms


    FT8 Vibration Alarms
    Generator channels
    Key Phasors
    Power Supply Rack Interface Module
    FT8 Vibration Alarms
    Turbine A
    FT8 Vibration Alarms
    Turbine A/B
    FT8 Vibration Alarms
    Turbine B
    FT8 Vibration Alarms
    Turbine A/B
    FT8 Vibration Alarms
    This is the ICE display of the vibration.
    FT8 Vibration Alarms

    Problem with the channel – needs attention.


    This channel is issuing a shut down.
    This channel is in alarm.
    This channel is in bypass.
    This channel has been selected off.
    This channel is in trip multiply.
    This channel has its alarm inhibited.
    This channel is not being monitored.
    FT8 Vibration Alarms
    VT
    003
    VT
    001 VT
    002

    Vibration Monitoring Components


    Engine / Power Turbine vibration monitoring is provided at three points:
    FLANGE A
    FLANGE K
    FLANGE S.
    FT8 Vibration Alarms

    VT
    001

    Flange-A LP Rotor Vibration Detection


    The filter is set to look at vibrations between 40 and 300 Hz to detect LP
    rotor issues.

    Alarm 2 Mils.
    Trip 4 Mils.
    FT8 Vibration Alarms
    VT
    001

    Flange A Collector Box Alignment Detection


    This channel uses the same signal as the previous one (signal is
    jumpered). This channel filters out all the vibration not between 8 to 32
    Hz. PW Power Systems recommends resolving this issue within 48
    hours.

    Alarm 80 mm/sec for 30 minutes.


    Trip - there isn't one.
    FT8 Vibration Alarms
    VT
    002

    Flange K HP Rotor Vibration Detection

    The filter is set to look at vibrations between 40 and 300 Hz to detect


    HP rotor issues. The vibration is further filtered by a tracking filter which
    looks only at frequencies that coincide with the HP rotor frequency
    (RPM / 60).

    Alarm - 1 Mil. Trip - 2 Mils.


    FT8 Vibration Alarms
    VT
    002

    Flange K Water Injection Vibration Detection

    The filter is set to look at vibrations between 421 and 451 Hz to detect
    instability in the combustion flame, which can excite various parts of the
    turbine causing wear, cracking etc. Also a jumpered signal.

    Alarm - 29 mm/sec for 10 seconds. If the water is turned off the


    Drive Back - 36 mm/sec for 10 seconds. vibration goes away instantly.
    Drive back - 73 mm/sec for 2 seconds. Use this for troubleshooting.
    FT8 Vibration Alarms
    VT
    003

    Flange S Power Turbine Vibration Detection

    The filter is set to look at vibrations between 40 and 300 Hz to detect PT rotor issues.

    Alarm - 3 Mils.
    Trip - 4
    FT8 Vibration Alarms

    The generator shaft rides on a thin film of oil which


    separates the shaft and bearing material.
    Generator displacement
    Alarm 4 Mils. sensor.
    Trip 6 Mils.

    Oil film
    No signal integration !
    Plain journal Generator shaft
    bearing

    You might also like