Meeco Moisture Analyzer Manual

WATERBOY 2 TM
Micro-Processor Based Portable Moisture Analyzer

Industrial Gas Electronic Gas Natural Gas Medical & Aviation Aerospace & Military Specialty Gases
Micro-Processor Based Simplicity
The Portable Moisture Measurement Solution. The MEECO WaterBoy 2 offers a cost effective solution for reliable, portable
moisture analysis. Utilizing our time- proven electrolytic technology, it features new micro- processor driven electronics.
The simplicity of the WaterBoy 2’s three-button interface makes changing display options effortless. Now, with the push of a
button, you can select from five different display options.
Its modular design and sturdy construction is ideal for field conditions. The WaterBoy 2 is equipped with an internal 24 VDC
lead acid rechargeable battery, in addition to a 110 VAC transformer. And, with the optional RS-232 port, you can send data to
a printer, a computer or other control device.
WaterBoy 2 Key Features Include:
;; Stable Value Indication / Low Battery Indication

;; Units of Measure: Micro-processor based electronics allow choice of display options including ppmV, ppmW,
lbs/mmscf, or °C and °F dewpoint.
;; Three-Button User Interface: Mode/Enter key, along with simple Up and Down keys, make using the menu
quick and simple.
;; LCD Display: Integral digital display allows direct indication at point of use, and quick field configuration of the
control parameters. Also includes low battery indicator light.
;; Scalable Output: Flexibility to change output scales in field. No need to replace electronic components.
Simply access menu via Mode/Enter key and select output scale.
;; On-line Verification: Use simple Delta Flow procedure to quickly verify sensor linearity and performance
on-line.
;; Approvals: FM Approved Class 1 Division 2, Non-incendive. The Electrolytic Technology is specified by the
European Pharmacopoeia for moisture analysis in medical gases.
WaterBoy 2
Micro-Processor Based Portable Moisture Analyzer
Performance WaterBoy 2
0—1000 ppmV with 0.1 ppm resolution (100cc flow units)
Operating range (0.5 ppmV LDL)
0—5000 ppmV with 1 ppm resolution (10cc flow units)
Accuracy (greater of) ±5% of reading or 0.4 ppm, whichever is greater **
Operating Temperature -20°C to +60°C (-4°F to 140°F)
User Interface 3-key touch pad
Display 1 line, 16 character alphanumeric LCD 3/8” high digits

ppmV, ppmW (requires user input of molecular weight), °C and °F dewpoint and lbs/mmscf
Display Options (Note: °C and °F dewpoint is referenced to atmospheric pressure.
Pressure dewpoint available with user input of operating pressure).
Gas Handling System and Conditions
Gas connections 1/8” Compression (consult factory for gas compatibility)
Inlet pressure 50-3000 psig

Sample: 10 sccm or 100 sccm
Flow rate
Bypass: 1000 sccm
Dimensions H x W x D [in (mm)]
12” (30.5cm) x 8 3/4” (22.2cm) x 6 1/4” (15.9cm)
Weight
Unit Weight 17 lbs. (7.7 kg)
Electrical
0-1 VDC ouput into 2k ohms or greater (standard). Field range programmable
Alarm indicators
Isolated RS232 (optional). Reduces battery operation time by 50%. (Not FM approved)
Internal 24 VDC lead acid rechargable battery with a 2.6 amp hour rating (suitable for 5-day
typical operation at room temperature)
Power requirements External 24 VDC MEECO supplied 110 VAC wall transformer. (Unit can be operated while
charging)
Optional external 24 VDC ±10% 1/2 amp maximum power supply (customer supplied)
**in pure O2: ± 10% of reading/3 ppm, whichever is greater
Principle of Operation
Based on Faraday’s Law of Electrolysis, the WaterBoy 2’s sensor absorbs and electrolyzes moisture
to fractional parts-per-million (ppm). One hundred percent of the sample moisture is absorbed by a
hygroscopic film that covers two spiral wound electrodes embedded in a hollow glass tube. When
the sample gas enters the cell at a known flow rate, the phosphorus pentoxide (P2O5) film absorbs
all the moisture molecules present. By applying an electrical potential (voltage) to the electrodes,
each absorbed water molecule is electrolyzed, generating a finite current. This current is precise and
proportional to the amount of absorbed water.
The Trusted Name In Moisture Analysis. Founded in 1948, MEECO specializes in moisture
analyzers used in facilities around the world. We tackle the tough problems, such as natural gas
pipelines, where instruments are often subject to physical abuse, corrosives and serious
contaminants. We’re proud to report, the MEECO name is synonymous with moisture analysis.
250 Titus Avenue, Warrington, PA 18976
Phone: +1 (215) 343 6600 • Fax: +1 (215) 343 4194
sales@meeco.com • www.meeco.com
02/2020

Meeco Moisture Analyzer Manual

Uploaded by

Copyright:

Available Formats

Meeco Moisture Analyzer Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Meeco Moisture Analyzer Manual

Uploaded by

Copyright:

Available Formats

WATERBOY 2 TM

Micro-Processor Based Portable Moisture Analyzer

Micro-Processor Based Simplicity

WaterBoy 2 Key Features Include:

;; Stable Value Indication / Low Battery Indication

Accuracy (greater of) ±5% of reading or 0.4 ppm, whichever is greater **

Operating Temperature -20°C to +60°C (-4°F to 140°F)

User Interface 3-key touch pad

Display 1 line, 16 character alphanumeric LCD 3/8” high digits

Gas Handling System and Conditions

Gas connections 1/8” Compression (consult factory for gas compatibility)

Inlet pressure 50-3000 psig

Dimensions H x W x D [in (mm)]

12” (30.5cm) x 8 3/4” (22.2cm) x 6 1/4” (15.9cm)

Unit Weight 17 lbs. (7.7 kg)

**in pure O2: ± 10% of reading/3 ppm, whichever is greater

You might also like