Physical Chemistry 2nd Edition Ball

Solutions Manual
Visit to download the full and correct content document: https://testbankmall.com/dow
nload/physical-chemistry-2nd-edition-ball-solutions-manual/
 2.12. First, we need to calculate the number of moles of phosphorous:

 1mole 
50.0g P   1.61molesP
 30.97g 
 J 
350

q  (1.61moles) 56.99  0.1202T

  dT
mol  K 
298

350
 2 

0.1202T
q  1.61moles 56.99T   8.03103 J
 
 2 298

10 10
Instructor’s Manual Chapter 2

2.14. The kinetic energy of the hailstone, KE, is equal to:

mv 2  (6.0 10 5 kg)10.0m / s   3.0 10 3 J
1 1 2

2 2
Since all of the kinetic energy is converted into thermal energy, we can say that:
KE  m  c  T
 J 
3.0 103 J   6.0 10 2 g  2.06 (T )
 gK 
T  0.024K

2.16. First, calculate the energy needed to warm the water by 1.00ºC:
q = mcT = (1.00105 g)(4.18 J/gK)(1.00 K) = 4.18105 J
Now, determine how many drops of a 20.0 kg weight falling 2.00 meters in gravity will
yield that much energy. The amount of energy in one drop is
mgh = (20.0 kg)(9.81 m/s2)(2.00 m) = 392.4 J. Therefore,
4.18 105 J
# drops   1065 drops .
392.4 J/drop

2.18. True. As the gas expands, the average distance between molecules increases. For a real
gas, work must be done to increase this distance due to intermolecular attractive forces
between the gas molecules.

2.20. The major inaccuracy is the omission of the phrase “for an isolated system”, since for
non-isolated systems energy can move in or out, giving the impression that that energy is
created and/or destroyed. Can you find other inaccuracies?
2.22. q = -124.0 J
1 atm 1L
w  pext V  (1550 torr)(119 mL - 377   0.526 L  atm
760 torr 1000 mL
mL)

101.32 J
w = 0.526 L  atm  = +53.3 J
1 L  atm

Since U = q + w, U = -124.0 J + 53.3 J U = -70.7 J

Vf 10 L
2.24. Reversibly: w  nRT ln  (1mol)(8.314J/mol  K)(298.0 K)ln  5705 J
Vi 1.0 L
101.32 J
Irreversibly: w   p ext V  (1.00 atm)(10L -1.0 L)   912 J
1 L  atm

11 11
Instructor’s Manual Chapter 2

The reversible work is much larger than the irreversible work. This is one numerical
example of the concept that the maximum amount of work is obtained by a reversible
process.

12 12
Instructor’s Manual Chapter 2

2.26. If any change in a system is isothermal, then the change in U must be zero. It doesn’t
matter if the process is adiabatic or not!

2.28. Of the two distances mentioned, the 9-mile distance between the two cities is analogous
to a state function, because that distance is independent of how a trip is actually traveled
between the two cities.

2.30. The keys to this problem are the stated conditions. If the processes are adiabatic, then q =
0. If the initial and final temperatures are the same, then U = 0. By the first law of
thermodynamics, if U and q are 0, then w = 0 as well. While these values fit the
conditions of the problem, do you think that a piston can even work under such
conditions? Probably not.

2.32. First, we should determine the number of moles of gas in the cylinder. Assuming the
ideal gas law holds:
pV (172 atm)(80.0 L)
pV  nRT can be rearranged to n  
RT L atm
(0.08205 )(20.0  273.15 K)
mol  K
n  572 mol N 2 gas

pi p f
(a) The final pressure can be determined using Charles’ law: 
Ti Tf
piT f (172 atm)(140.0 273.15 K)
pf    242 atm

pf
Ti (20.0  273.15 K)
(b) w = 0 since the volume of the tank does not change.
q = n‫ܥ‬௏ T = (572 mol)(21.0 J/molK)(140.0ºC – 20.0ºC) = 1.44106 J
  U = q + w = 1.44106 J + 0 = 1.44106 J.
V J 0.10 L
2.34. w  nRT ln f  (0.505 mol)(8.314 )(5.0  273.15 K) ln  2689 J
Vi mol  K 1.0 L

q = -2690 J (given)
 U = q + w = -2690 J + 2689 J = -1 J
 H = U + (pV) Since the process occurs at constant temperature, Boyle’s law applies
and (pV) = 0. Therefore, H = -1 J.

13 13
Instructor’s Manual Chapter 2

2.36. Since we’re at the normal boiling point, the vaporization is a constant-pressure process (1
atm at the normal boiling point). Therefore, H = qp and H = +2260 J/g.
For work, we need change in volume. Assuming the ideal gas law holds, the volume of 1
gram of steam at 100ºC (373.15 K) is:

14 14
Instructor’s Manual Chapter 2

1 mol
n  1g H2 O   0.0555 mol
18.02 g

nRT (0.0555 mol)(0.08205 L atm/mol K)(373.15 K)

V    1.720 L
p 0.988 atm

The volume of a gram of water, 1.00 mL, is negligible compared to this. Therefore, let us
use V = 1.720 L. Therefore:
101.32 J
w  (0.988 atm)(1.720 L)   172 J
1 L  atm
Since U = q + w, we have U = +2260 J – 172  J = 2088 J.
 U   U 
2.38. In terms of pressure and volume: dU    dp    dV .
 p V  V  p


 H   H 
For enthalpy: dH    dp    dV .
 p V  V  p

2.40. w  PV  0 ; There is no change in volume. Assuming the heat capacity of an ideal
gas:
298.15 298.15
 1mole  J   J  298.15
U  q   nCv dT   (35.0g)   20.78  dT   361 T 348.45  1.82 10 J
4

348.45 348.45  2.016g  mol  K   K

Using the ideal gas law:

 nRT 
H  U  (PV )  U  V P  U  V
 
 V 
 1mole  J 
 1.82 10 4 J  (35.0g)  8.314  298.15  348.45K   2.55 10 J
4

 2.016g   K  mol 

 J 
2.42. q  m  s  T  (244g) 4.184 (20.0  80.0K )  6.1310 4 J
 
 K  mol 
Since it is a constant pressure process (assumed 1 atm), H=-6.13x104J.
Now, we need to calculate the volume change of the coffee:

   3 3 

15 15
Instructor’s Manual Chapter 2

mass 1cm 1cm

V      (244g)     6.64cm
3

 density   0.9982g 0.9718g 

 1mL   1L  101.32 J 
w  PV  (1atm)(6.64cm 3 )     0.673J
 cm 1000mL  1L  atm 
3

U  q  w  61300J  0.67J  6.1310 4 J

16 16
Instructor’s Manual Chapter 2

 
2.44. Start with U  CV T and H  U   pV : Since p V = RT for an ideal gas, we also
have H  U    RT  . Substituting for H (equation 2.32) and U (equation 2.27):

C p T  C v T  (RT )

R is a constant, so it can be removed from the  term:

C p T  C v T  RT

Now all terms can be divided by T to get the desired relationship:

C p  Cv  R .

2.46. isobaric = constant pressure isochoric = constant volume isenthalpic = constant enthalpy
isothermal = constant temperature. A gaseous system that has all these conditions
simultaneously probably isn’t undergoing any physical change! Can you conceive of a
process in which all of these conditions are satisfied at once?

2.48. Actually, the ideal gas law can be used to determine the Joule-Thomson coefficient for an
ideal gas, but it will turn out that the Joule-Thomson coefficient for an ideal gas is zero!
T
2.50. Using the approximate version  JT  :
p

 p = 0.95 atm – 200.00 atm = -199.05 atm Since JT = 0.150 K/atm:
 T
0.150 K/atm  T  (0.150 K/atm)(-199.05 atm)  - 29.9 K
199.05 atm

If the initial temperature is 19.0ºC and the temperature drops by 29.9 degrees, the final
temperature should be about 19.0 – 29.9 = -10.9ºC.

2.52. µJT for Argon at 0°C and 1atm is 0.4307K/atm. From Eqn 2.35 we know that:
 H   J  K  J
   C P   JT    20.8  0.4307   8.96 ; C P for a monatomic ideal
 P T  K  mol  atm  mol  atm
5
gas is equal to R .
2

2.54. Although U and H have similar behavior for isothermal processes of ideal gases, they
won’t necessarily for real gases. Therefore, a Joule-Thomson coefficient defined in terms
of U can be defined but will not have the same numerical value as one defined in terms of
H. In addition, the Joule-Thomson experiment is originally defined (as is JT) for an

17 17
Instructor’s Manual Chapter 2

isenthalpic process, not one for which U is constant. Therefore, that definition of JT
would probably not be proper.

18 18
Instructor’s Manual Chapter 2

3 5
2.56. Since CV  R and C p  R :
2 2

3 3 1 cal
R  (8.314 J/mol  K)   2.981 cal/mol  K
2 2 4.184 J
3
Or, in different units: (0.08205 L  atm/mol  K)  0.1231 L  atm/mol  K
2
5 5 1 cal
R  (8.314 J/mol  K)   4.968 cal/mol  K
2 2 4.184 J
5
Or, in different units: (0.08205 L  atm/mol  K)  0.2051 L  atm/mol  K
2

3
2.58. C V for a monatomic ideal gas is equal to R . Using the equation U  w  nC V T : -75
2
J = (0.122 mol)(12.47 J/molK )T and solve for T:
 T = -49 K. Since the initial temperature was 235ºC = 508 K, the final temperature is 508
– 49 = 459 K.

 5R 
 
CP 
  2  5
2.60.  . For a monatomic ideal gas,   

C 3R 3
V
 
 
 2 

2.62. (a) CO2 is a linear polyatomic molecule where N=3 atoms. In the low temperature limit it
only has contributions from translational and rotational motion so
3 5 7 C 7
C V  R  R  R. C P  R,so   P  . In the high temperature limit,

2 2 2 CV 5

vibrational motion contributes as well so:

5 13 15 C 15
C V  R  (3N  5)R  R. C P  R,so   P 

2 2 2 CV 13

(b) H2O is a non-linear polyatomic molecule where N=3 atoms. In the low temperature
limit it only has contributions from translational and rotational motion so
3 3 C 4
C V  R  R  3R. C P  4R,so   P  . In the high temperature limit,

19 19
Instructor’s Manual Chapter 2

2 2 CV 3
vibrational motion contributes as well so:
CP 7
C V  3R  (3N  6)R  6R. C P  7R,so   

CV 6

20 20
Instructor’s Manual Chapter 2

2/3
V  Tf
2.64. Using Eqn. 2.47:  i  
Vf Ti
 
2/3
 
Vi  x x  0.63T ; The final temperature is 63% of the initial temperature.
   ;
 2V  i
 i Ti
2/5 2 / 5
p  2/5
    0.00074 atm 
pf    0.550.
 
Tf
2.66. For an adiabatic change,    . Therefore,  
f
 p     0.0033 atm 
 i  Ti  i 
p

Therefore, the absolute temperature will drop to 55% of its initial temperature.
2.68. As vibrational energies begin to have more significance, decreases. As decreases, the
exponent in the equation in Example 2.14 become smaller. This makes the final
temperature in the second example higher than the first as is demonstrated.

2.70. (a) N2 and CO have nearly identical molar masses, M. What is different between the two
gases is over a temperature range. By measuring the speed of sound at several
different temperatures of the gases, one should be able to differentiate between the
two.
(b At 100K:

100K 
7 J
  8.314
  
speed  5 K mol 
 163m / s
 
kg
0.04401
mol
At 500 K:

15 J
  8.314  500K
  
 




speed 
13 K  mol
 330m / s
kg
0.04401
mol
2.72. The volumes of both water and ice at 0ºC are:
18.02 g 18.02 g

21 21
Instructor’s Manual Chapter 2

water: Vl   18.02 mL; ice: Vs   19.66 mL .

0.99984 g/mL 0.9168 g/mL

Therefore, V = 19.66 mL – 18.92 mL = 0.74 mL, so that the work is

 1atm   1L  101.32J 
w   pext V   1bar      0.74mL      0.074J .
1.01325bar  1000mL  1L·atm 

22 22
Instructor’s Manual Chapter 2

2.74. According to Table 2.3, 1 gram of H2O gives up 2260 J when it condenses. Since each
gram of ice requires 333.5 J to melt, we get
1g
2260 J   6.78 grams of ice that can be melted.
333.5 J
2.76.  rxn H    f H (prods)   f H (rcts)  (2 mol)(26.5kJ/mol) - 0 - 0  53.0 kJ

2.78.  
 rxn H  60 f H o [CO 2 (g)]  f H o [C 60 (s)]  60 f H o [O 2 (g)]  26367kJ / mole

60(393.51kJ / mol)  x  0  26367kJ / mole

 f H o [C 60 (s)]  2757kJ / mole

2.80. The reactions are:

2[NaHCO3 (s)  Na (s) + ½ H2 (g) + C (s) + 3/2 O2 (g)] 2 -fH = +1901.62 kJ
2 Na (s) + C (s) + 3/2 O2 (g)  Na2CO3 (s) fH = -1130.77 kJ
C (s) + O2 (g)  CO2 (g) fH = -393.51 kJ
H2 (g) + ½ O2 (g)  H2O (l) fH = -285.83 kJ
This yields the overall reaction (you can verify that), and the overall rxnH is the sum of
the values on the right: rxnH = 91.51 kJ.

2.82. The reaction is 2 Al (s) + Fe2O3 (s)  Al2O3 (s) + 2 Fe (s). The rxnH is (using data from
the appendix): (2 mol)(0 kJ/mol) + (1 mol)(-1675.7 kJ/mol) – (1 mol)(-825.5 kJ/mol) – (2
mol)(0 kJmol) = -850.2 kJ.

2.84. In this case, since the combustion occurs in open atmosphere in (assumed) constant
pressure, this time qp = H = -31,723 J. If the expansion of gases is done against a
constant atmospheric pressure of 1 atm, to determine work we need to know the net
volume of gas produced. From exercise 2.55, we found that there was a net change of
–0.00491 mol of gas produced (ignoring the volume of the benzoic acid itself). Thus,
nRT (0.0049 mol)(0.08205 L atm/mol K)(24.6 273.15)
V    0.120 L less gas volume
p 1 atm

Using this change in volume to calculate work:

101.32 J
w   p ext V  (1atm)(-0.120 L)   12.1J
1 L  atm

Finally, to calculate U:

23 23
Instructor’s Manual Chapter 2

U  H  ( pV )  H  (n)RT  31,723  (0.00491 mol)(8.314 J/mol  K)(24.6  273.15)

U  -31,723  12.1 J  - 31,711J

24 24
Instructor’s Manual Chapter 2

2.86. This problem is very similar to Example 2.19, so we will follow that example, taking data
from Table 2.1.
The heat needed to bring the reactants from 500ºC (or 773 K) to 298 K is:
 H1 = q = (2 mol)(2.02 g/mol)(14.304 J/gK)(-475 K) + (1 mol)(32.00 g/mol)
(0.918 J/gK)(-475 K) = -41403 J
The heat of reaction is 2(fH[H2O(g)]) = 2 mol  -241.8 kJ/mol = -483.6 kJ = H2
The heat needed to bring the products from 298 K to 500ºC (or 773 K) is:
 H3 = q = (2 mol)(18.02 g/mol)(1.864 J/gK)(475 K) = +31,910 J
The overall rxnH is the sum of these three parts. Converting all energy values to kJ:
 rxnH = -41.403 kJ – 483.6 kJ + 31.910 kJ = -493.1 kJ

25 25