Hitachi Mining Performance Handbook

Publication：December 25, 2019
4th Edition
Mining
Performance
Handbook
Technical Marketing Support Dept.

Mining Sakes and Service Div.
Mining Group
Index
‐Preface
‐Line up
‐Hydraulic Excavator
‐Features
‐Bucket Selection
‐Specification
‐Working Range/Digging Forces
‐General Dimensions
‐Ground Pressures
‐Cycle Times
‐Production Overviews
‐Dump Truck
‐Features
‐Truck Specification
‐Tire Specification
‐Body Selection
‐Use of Performance Curves
‐Performance curves:
EH3500AC‐3
EH4000AC‐3
EH5000AC‐3
Mining Performance handbook 1/89

Preface
・Contents of this handbook
This handbook covers the information of Mining Products(Mining excavators and Rigid Dump Trucks) sold by HCM.
If you require information about small or middle size machines, please refer to the brochure or the specification
sheet of the products. This handbook covers following contents;
・The contents described in brochure
・The contents described in specification sheet.
・The contents which often to be inquired.
・Situation of using this handbook

We expect customers to use this handbook in following situation.
・Estimation of each model’s production.
・Compare the models to purchase.
・ Important reminder for using this handbook and non‐representation on accuracy of the Data
Data regarding performance of the Machine listed in this handbook such as production, cycle time of excavator,
performance curve, etc. (“Data”) are prepared based on numerical calculation from simulation and other method,
measurements under certain conditions and our experience. The Data may be subject to significant change due to
various factors such as job efficiency, operator skill, characteristic of digging materials, ground conditions, altitude,
climate, etc., and the Data may change even if the Machine was operated under the same condition as when the
Data were collected. HCM cannot and does not guarantee that the Machine will perform exactly as the Data show
under any condition.
・ Reference time of the Data

The Data are current at the time of publication of this handbook, and are subject to change due to changes in
machine performance, specification and/or method for measurement. HCM does not guarantee that the Data in
this handbook are the most up‐to‐date data available. For the latest version of handbook, please contact our
distributor.
Technical Marketing Support Dept.

Global Mining Div.
Hitachi Construction Machinery Co.,Ltd.

Hitachi Mining Products
Line up
Excavator Dump Truck
Diesel Drive AC Dump Truck

EX1200‐6 BH/LD EX1200‐7 BH/LD EH3500AC‐3
EX1900‐6 BH/LD EH4000AC‐3
EX2600‐6 BH/LD EX2600‐7 BH/LD EH5000AC‐3
EX3600‐6 BH/LD EX3600‐7 BH/LD
Electric Drive
EX1900E‐6 BH/LD
EX2600E‐6 BH/LD
EX3600E‐6 BH/LD
EX5600E‐6 BH/LD
EX8000E‐6 BH/LD

Hydraulic Contents
Mining Excavators
Hydraulic
Mining
Excavator
Features
Bucket Selection
Specification
Working Range/Digging Forces
General Dimensions
Ground Pressures
Cycle Times
Production Overviews

Hydraulic EX‐6 model Features
Mining Excavators
Features
Large Sized Production with the Gigantic Excavators from Hitachi. The Hitachi Giants Keep on
Progressing. The Buckets Get Bigger…
Along with Enhanced Reliability and Durability. Massive Production and Power on Hand.
Giant‐Sized Productivity Based on Hitachi's ・Center Track Frame—
Theory of Evolution. More strength for this key area.
Each Hitachi generation listens to the needs of the The center track frame of
work site and gives birth to an even-better new integral cast steel
generation. structure can avoid
・Powerful Engine— Ready for the task. stress concentration
and increase reliability.
・Emission Control Engine—
Helping to protect our environment. ・Strategically Positioned Oil Cooler—
Helps keep oil temperatures.
・Efficient E-P Control— The oil cooler is used for
Adjusts power output to the work being performed. optimal cooling efficiency. It is
Hitachi‘s computer-aided Engine-Pump Control (E-P positioned far from the engine
Control) coaxes optimum efficiency from the engine radiator for even better cooling
and hydraulic pumps. This innovative system senses potential.
load demand and controls engine and pump output for
maximum operating efficiency. ・High-Mounted Compact Travel Motors and
Optional Travel Motor Guard—
・Larger Bucket Provides High Work Capacity. Help to boost durability at rugged work sites.
This design helps protect
・High Excavating Force. The travel motors from
damage by rocks.
・Large Bucket— Designed to enhance efficiency.
The large bucket has
been shaped specifically ・Rugged Track Links—
to enhance scooping and Shoes include roller guides for extended service life.
loading operations. Its This design has proven itself on Hitachi's popular
sharp tilt angle helps Giant EX Series. The roller guides have been added to
boost operating efficiency. help extend service life.
・Productivity-Boosting Auto-Leveling
Mechanism—
One-lever leveling control.(Except EX8000-6)
This is another unique Hitachi function developed
exclusively for more efficient leveling operations.
・Constant Correct Track Tension—
More Than Durable— Just Plain Tough Nitrogen gas accumulators absorb abnormal track
tension. ※This is used for over EX1900-6 sized models
Built-in toughness means the Hitachi will continue to
Helps prevent abnormal track tension from causing
get giant-sized jobs done fast.
damage. Travel is automatically stopped if
・Rigid Box Design—Resists bending and twisting
accumulator pressure exceeds a preset level.
forces.
Computer-assisted
analysis was used to
check that the frame
box can withstand heavy-
duty excavation work.
Mining Performance handbook 5 /89

Mining Excavators
Designed to Offer Comfort and Intelligence ・Intelligent Multi-Display Monitor—
Comfortable operator space and simplified Provides machine data and operating status at a
maintenance, backed by Hitachi technologies and glance.
experience. The operator can monitor machine
conditions and operating status
・High Visibility Cab Height— with a 10.5- inch color LCD.
Providing a clear view of the work area. The controller provides instant
fault diagnosis through all
・Rugged Comfortable Cab— sensors, displaying warnings and
Protects the operator from falling objects. countermeasures if failure arises.
※Illustration shows a sample of the
Fluid filled elastic mounts help absorb vibration to
Emergency Switch.
provide durability and a comfortable ride. The OPG*
top guard level II (ISO) is provided on the cab roof.
*Operator Protective Guard
Outside Cameras (Optional)—
・Efficient Cab Layout— Enhance operating safety.
All controls within natural reach of operator. The operator can monitor
The ergonomic layout of the cab means the operator around the machine, using
will do less stretching and reaching when operating the four optional cameras to
controls. This adds up to less operator fatigue and eliminate blind spots.
greater operating efficiency.
・Electric Joystick Levers—

Provides pleasant control with less fatigue.
Electric joystick control levers have a feather-touch
allowing long periods of effortless operation. Its stroke
is much shorter than that of hydraulic control.
・Air Suspension Seat with Auto Operator Weight

Adjuster.
The operator seat cushion can automatically be
adjusted according to the operator weight. This is
convenient for a machine operated by two or more
operators.
・Adjustable Sliding Cockpit—

Moves to the best position for the operator.
The operator can adjust the position of the levers and
the seat to custom fit his size and operating style.
・Constant-Cab-Comfort Air Conditioner—

Keeps the cab pressurized to keep out dust while
maintaining comfortable temperature.

Mining Excavators
Designed to be Maintainable
Carefully engineered to allow full 24-hour ・The Centralized Lubrication System:
operation. Fast-Filling System ※Optional for EX1200-6 (only fuel
line)
・Easy Access and Maintenance—

Easy access speeds inspections and maintenance
The wide fender, spacious counterweight top and
central passage give easy access to major components
for convenience of inspection and maintenance.
・Low Maintenance Dust Ejector—
・Counterweight with Walkway— Automatically expels dust from the air cleaner
Easier access for maintenance. This is one less time-consuming task during routine
A walkway around the entire maintenance.
counterweight provides easy
access to key rear areas. ・Contamination sensor—Alerts the operator of
This means faster and safer excessive contaminants in the oil. ※Except EX1200-6
inspection and maintenance. This system detects
accumulated contaminants
・Folding Stairs with Wide Steps. that could cause damage
※Optional for EX1900-6. EX1200-6 have slide ladder as
optional parts instead of folding stair. and alerts the operator
Folding stairs is designed for before trouble occurs.
easy access to the machine
for servicing and maintenance. ・Remote Machine Management with Global e-
Service
・Wide-Open Service Area— This on-line machine management system allows you
Provides the space needed for quick and easy to access each on-site machine from a PC in your
inspection and maintenance. office.
This area is conveniently located You can get its operating information and location to
at the center of the body and increase productivity. Operating data and log are sent
provides access to the engine as to a Hitachi server for processing, and then to
well as the hydraulic and customer and dealers. This system is available 24
electrical systems. hours a day, all the year around.
・Auto Lubrication System—

Eliminates the need for manual lubrication.
This system automatically lubricates the front joint
pins and swing circle. This eliminates cumbersome
daily lubrication.
・Easy-to-Replace Grease Drum Can—Designed to

provide quick and easy grease drum can changes.
※ Only EX1900-6,2600-6,3600-6 have this type of Grease Drum
Can.
・Convenient Centralized Filter System—

Designed to make filter inspection and
maintenance easier.
Centralized position means
that inspection and
maintenance can be performed
quickly and easily.

Mining Excavators
designed for SUSTAINABILITY
Hitachi’s energy optimization technologies are ・HYDRAULIC OIL COOLER(Over EX2600-7 model)
kinder to the planet and reduce consumption A larger hydraulic oil cooler with
variable speed fan reduces energy
costs while achieving superior productivity. demand and creates a more reliable
hydraulic system. The oil cooler is
・ENGINE OPTIONS
kept separate from the radiator to
Engine manufacture:
effectively reduce hydraulic oil
EX1200-7:Cummins only
temperatures, increase hydraulic service life, and
Over EX2600-7 model: Cummins and MTU
improve maintainability.
Emission certificate:
U.S. EPA Tier 4 Final confirming and Fuel
Consumption Optimization (FCO)
・MAIN PUMP ELECTRIC REGULATORS designed for PRODUCTIVITY

Each individually controlled Equipped with more than 100 years of technological
hydraulic pump has its own electric innovation from Hitachi, Ltd. group companies, our
regulator, enhancing engine EX-7 excavators are engineered to achieve more for
power, lowering fuel consumption, your mine site.
and increasing
productivity to lower the total cost of operation.
・AUTO-LEVELING MECHANISM
・HYDRAULIC REGENERATION FOR LOADER APPLICATION(Except EX8000-7)
CIRCUIT The control of both the arm and boom is achieved
The flow regeneration valve fitted through a Hitachi proprietary leveling cylinder
to the hydraulic system reduces mechanism, using just one arm lever. This means the
pump demand, ultimately reducing bucket can automatically be pushed out Horizontally
power requirements from the using a single movement. Potential energy created
hydraulic system and engine. The from the front weight is recycled as
result is lower fuel consumption level cylinder thrust and added
and improved pump life. to the arm digging power.
*EX1200-7:Boom,arm,and bucket regeneration This allows for higher
OverEX2600-7 model :Boom regeneration
digging power,
especially at the end
・HYDRAULIC OIL COOLER SYSTEM
of a stroke,
A redesigned hydraulic oil cooler
improving work
with variable speed fan reduces
performance.
energy demand and creates a more
reliable hydraulic system. The oil
cooler is kept separate from the
radiator to keep hydraulic oil cool
more effectively. Time and effort spent cleaning is
drastically reduced, and service life of hydraulics is
extended.
・RADIATOR FAN MOTOR (EX1200-7)

The radiator fan is now driven
by a hydraulic system, replacing
the previous mechanical drive
system. The fan automatically
adjusts to meet engine requirements, creating an
optimized cooling system with less horsepower
demand and less operational noise.

Mining Excavators
designed for SAFETY
Safety is Hitachi’s ultimate priority, realized in ・CENTER FRAME UNDERGUARD(Option)
the EX-7 series of excavators with a range of The newly designed heavy duty
guard protects hoses located in the
intelligent safety-focused designs. track center frame from rocks and
debris ingress, providing extra
・DUAL ISOLATOR SWITCH
protection and reliability.
The conveniently located dual
isolator switch offers the option
to deactivate the engine and
battery individually. When
designed for RELIABILITY
inspections and maintenance are required, the battery
isolator provides the benefit of isolating both the Hitachi’s EX-7 series is loaded with intelligent
positive and negative terminals of the battery for a safe features which minimize downtime and
working environment. The engine isolator deactivates optimize excavator longevity.
the engine starter motor while allowing battery power
to the electric system for troubleshooting to enhance ・FRONT ATTACHMENT HOSES
safety and maintainability. Hitachi’s hose design is based on a
cyclic fatigue rate to maximize
・ON-BOARD INCLINOMETER(Over EX2600-7 longevity and improve safety.
model) Front attachment hoses have been
The on-board inclinometer rearranged from the traditional arch style to an
assists the operator to work underslung configuration to remove the need for
within the safe limits of the clamping, reduce chafing and increase reliability.
machine, with two predetermined
safety limits providing extra assurance. If the first ・CAB RISER PRESSURIZER(Over EX2600-7 model)
safety limit is exceeded, the operator receives a visual The cab riser now features a
alert prompting them to take corrective action. The pressurizer system to reduce dust
alert escalates to an audible alarm if the second safety infiltration, extending the service
limit is breached. life of the electronic components
and devices within.
・EMERGENCY ESCAPE CHUTE(Over EX2600-7
model)
・SOLID CONDUIT WIRE HARNESSES(Over
An escape chute has been added EX2600-7 model)
to the side of the cab for use in Newly introduced solid conduit
an emergency. The chute allows harnesses and junction boxes
evacuees to descend vertically prevent dust and moisture ingress,
down from the machine, providing a safe and fast improving longevity. Electrical
route of escape when all other means of exit are harnesses between junction boxes can be replaced
blocked. individually, reducing maintenance time and cost.
・OPERATING LIGHTS
Strategically placed long-life LED working lights
designed for DURABILITY provide assured reliability for night operations.
Hitachi’s EX-7 excavators have been built to
withstand the harshest mining conditions while ・ELECTRONIC CYLINDER STROKE
delivering outstanding productivity. CONTROL(Over EX2600-7 model)
The new on-board electronic
・TRACK SHOES (EX1200-7) controller receives signals from
Improved Hitachi track link design angle sensors fitted to the main
mitigates premature failure of the frame, boom and arm to control the pump flow rate
master pin, increasing durability. and cylinder speed. Shock at stroke end of the cylinder
cycle is reduced, improving operator comfort and
lowering impact on cylinders and structures for more
reliable operation.

Mining Excavators
designed for EASE OF MAINTENANCE
Hitachi’s EX-7 series of excavators are now easier and designed for OPERATOR CONTROL
safer to maintain than ever before with an intuitive Intuitive and advanced features empower the operator
design. to personalize and streamline their work environment
for improved workflow and better productivity.
・LUBRICATION PIPING COVER(for over EX2600-7
model) ・MULTI-FUNCTIONAL DISPLAY
A swing circle cover has been Fitted with an LED back-light to
added to the outside of the swing improve clarity and reduce glare,
bearing, protecting the lubrication the multi-functional display
piping from debris damage. provides key machine
information and performance
indicators through use of an
・GREASE-LESS CENTER JOINT integrated dial switch interface.
The redesigned center joint employs
the machine’s hydraulic oil to
self-lubricate, reducing the need for ・POWER BOOST SWITCH (EX1200-7)
daily maintenance. When digging in hard rock environments, Power
Boost Switch can be temporarily activated to increase
・AUTO-LUBRICATION SYSTEM(Option for pump pressure and maximize hydraulic power in the
EX1200-7,Standard for over EX2600-7 model)
front attachment.
A new auto-lubrication system comes
with large capacity grease tank,
new grease pump, in-line grease filter
designed for OPERATOR COMFORT
with breather, grease level indicator
Hitachi’s EX-7 excavators are designed to work
in cab and provision for fitment of a
around the clock in often challenging conditions, so a
second grease pump in the lubrication tank. These
comfortable operating environment is essential
features provide a more reliable system with less
downtime.
・CLIMATE CONTROLLED AIR
CONDITIONING
・CONTAMINATION SENSORS(Option for EX1200-7,
standard for over EX2600-7 model)
The pressurized cab’s climate controlled
Contamination sensors are located on main hydraulic air conditioning helps to overcome
pumps, travel motor and swing motor to detect any environmental extremes. Optimized
contaminants that may cause damage to the hydraulic filtering of interior and exterior air
system. The sensors alert the operator of potential combined with the new flexi-vent system provides a
contaminants and record the fault code in the Data personalized and balanced environment that meets
Logging Unit (DLU), with the capability to remotely operator demands.
advise maintenance personnel.
・ROLL SCREENS (Option for EX1200-7,standard for over
EX2600-7 model)
・REVERSE FANS (EX1200-7)
Retractable front and side roll screens
Radiator and oil cooler fans can be reversed to eject
reduce heat buildup in the cab,
dust on cores and screens. This reduces the need for
improving efficiency of the climate
labor-intensive maintenance and extends the life of
controlled air conditioner for a superior
components.
operating environment.

Hydraulic EX‐6,EX‐7 model Features
Mining Excavators
Aerial Angle (option)

Hitachi Hydraulic Excavator with Peripheral Vision
Support System.(EX1900-6〜EX8000-6 and all EX-7 models)
・Camera Monitor
A camera monitor for Aerial Angle is located on the
left-front pillar of the cab. A Screen Changeover
Switch is located on the right hand side of the monitor.
・Locations of the Cameras & Viewing Angles

The Aerial Angle feature is available to significantly
increase peripheral vision around the hydraulic
excavator by providing synthesized multiple images
captured by cameras specifically positioned at 4
locations around the excavator. The feature displays
camera views on a single monitor to allow operators
an auxiliary means of checking for ground level
obstacles.

Hydraulic Bucket selection
Mining Excavators
Bucket Capacity
Bucket capacity is rated by using heaped capacity and struck capacity. At present, heaped capacity is widely used.
(1). Struck capacity (A)

Struck capacity is defined as the volume bounded by the inside bucket contour without consideration for material
supported or carried by spill guard or on bucket teeth.
(2). Heaped capacity (A + B)

Heaped capacity is defined as the volume in the bucket under the strike off plane, plus that of the heaped material
above the strike off plane with an angle of repose of 1:1 or 1:2, without consideration for material supported or
carried by the spill guard or bucket teeth.
At present, there are different standards to define the heaped capacity of a hoe bucket, causing confusion. This is
chiefly attributed to the difference in defining the angle of repose.
On the contrary, for a loader/loading shovel bucket, almost the same definitions are employed.
(3). Standards
There are various standards for designating the heaped capacity of bucket. The principal difference among these
definitions is the “angle of repose”, as listed in the table below.
Standard
ISO SAE JIS CECE PCSA
Bucket type
Backhoe bucket 1:1 1:1 1:1 1:2 1:1
Loader bucket 1:2 1:2 1:2 1:2 1:2
Then, the standards of backhoe which HCM described on brochure are “SAE,PCSA heaped ”.
ISO 7451: Earth-moving machinery – Volumetric ratings for hoe-type and grab-type buckets of hydraulic
excavators and backhoe loaders
ISO 7546: Earth-moving machinery – Loader and front loading excavator buckets - Volumetric ratings
SAE J296: Excavator, Mini-excavator, and Backhoe Hoe Bucket Volumetric Rating (Cancelled 1999)
SAE J742: Capacity Rating – Loader Bucket (Cancelled 2000, Superseded by ISO 7546)
JIS A 8403-4: Earth-moving machinery – Hydraulic excavators – Part 4: Bucket volumetric ratings
JIS A 8421-3: Earth-moving machinery – Loaders – Part 3: Bucket volumetric ratings CECE Section V:
PCSA No. 3:
ISO: International Organization for Standardization

SAE: Society of Automotive Engineers
JIS: Japanese Industrial Standards
CECE: Committee for European Construction Equipment
PCSA: Power Crane and Shovel Association
Note: This information may be subject to change without prior notice.

Hydraulic Specifications
Mining Excavators ・Backhoe Configuration
Model EX1200-6 EX1200-7 EX1900-6

Operating weight 111000kg* 117000kg** 192000kg*
Bucket Range
5.2-6.7m3 5.2-7.0m3 4.4-12.0m3
(ISO 7451 Heaped 1:1)
Engine
Number of Engines 1 1 1
Engine manufacture Cummins Cummins Cummins
Engine model QSK23-C QSK23-C QSKTA38-CE
Rated power
567kW 567kW 810kW
@1 800 min-1 (rpm)
(760HP) (760HP) (1086HP)
ISO14396
Piston displacement 23.15L 23.15L 37.8L
No. of cylinder 6 6 12
Emission certification U.S.EPA Tier Ⅱ FCO T4F U.S.EPA Tier Ⅱ
Hydraulic system
Max.oil flow 3×520L/min 3×520L/min 6×335L/min
Relief Valve Settings:
Implement Circuits
31.9MPa(325kgf/cm2) 31.9MPa(325kgf/cm2) 29.4MPa(300kgf/cm2)
(attachment)
Swing Circuits 27.4MPa(280kgf/cm2) 27.9MPa(280kgf/cm2) 29.4MPa(300kgf/cm2)
Travel Circuits 34.3MPa(350kgf/cm2) 34.3MPa(350kgf/cm2) 29.4MPa(300kgf/cm2)
Pilot Circuits 3.9MPa(40kgf/cm2) 4.4MPa(45kgf/cm2) 4.4MPa(45kgf/cm2)
Fuel Tank Capacity 1470L 1700L 4140L
Hydraulic Oil System 1350L 1350L 2200L
Hydraulic Oil Tank 610L 648L 1050L
Upperstructure
Bucket digging Force ISO 482kN(49200kgf) 482kN(49200kgf)* 671kN(68400kgf)
Arm crowd Force ISO 430kN(43900kgf) 430kN(43900kgf)* 620kN(63200kgf)
Max. Swing speed 5.2min-1(rpm) 5.2min-1(rpm) 4.7min-1(rpm)
Undercarriage
Travel speeds:
High 0 to 3.5km/h 0 to 3.5km/h 0 to 2.8km/h
Low 0 to 2.4km/h 0 to 2.4km/h 0 to 2.1km/h
Standard shoe width 700mm 700mm 800mm
* Standard front configuration
** U.S.EPA Tier 4 Final, Standard front configuration
FCO: Fuel consumption optimized
T4F: U.S.EPA Tier 4 Final

Model EX2600-6 EX2600-7

Operating weight 254000kg* 257000kg**
Bucket Range
17.0m3 17.0m3
Engine
Number of Engines 1 1
Engine manufacture Cummins Cummins MTU
12V 4000 12V 4000
Engine model QSKTA50-CE QSKTA50-CE
C13R C15
Rated power
1119KW 1119KW 1150KW
@1 800 min-1 (rpm)
(1500HP) (1500HP) (1542HP)
ISO14396
Emission certification U.S.EPA Tier Ⅱ FCO T4F FCO T4F
Hydraulic system
4×375L/min, 4×375L/min,
Max.oil flow
2×425L/min 2×425L/min
Implement Circuits
29.4MPa(300kgf/cm2) 29.4MPa(300kgf/cm2)
(attachment)
Swing Circuits 27.4MPa(280kgf/cm2) 27.4MPa(280kgf/cm2)
Travel Circuits 29.4MPa(300kgf/cm2) 29.4MPa(300kgf/cm2)
2
Pilot Circuits 3.9MPa(40kgf/cm ) 4.0MPa(41kgf/cm2)
Fuel Tank Capacity 5300L 5300L
Hydraulic Oil System 3170L 3170L
Hydraulic Oil Tank 1320L 1320L
Upperstructure
Bucket digging Force ISO 830kN(84600kgf) 830kN(84600kgf)
Arm crowd Force ISO 785kN(80000kgf) 785kN(80000kgf)
Max. Swing speed 3.8min-1(rpm) 4.1min-1(rpm)
Undercarriage
Travel speeds:
High 0 to 2.3km/h 0 to 2.3km/h
Low 0 to 1.6km/h 0 to 1.6km/h
Standard shoe width 1000mm 1000mm
* BE-front configuration
** U.S.EPA Tier 4 Final, BE-front configuration

Model EX3600-6 EX3600-7

Bucket Range
22.0m3 22.0m3
Engine
12V 4000 12V 4000
Engine model QSKTA60-CE Cummins QSKTA60-CE
C33 C35
Rated power
1450kW 1450kW 1450KW 1500KW
@1 800 min-1 (rpm)
(1944HP) (1944HP) (1944HP) (2011HP)
ISO14396
Hydraulic system
Max.oil flow 8×500L/min 8×500L/min
Implement Circuits
(attachment)
Pilot Circuits 3.9MPa(45kgf/cm2) 4.0MPa(41kgf/cm2)
Upperstructure
Undercarriage
Travel speeds:

Model EX5600-6 EX5600-7

Bucket Range
34.0m3 34.0m3
Engine
12V 4000 12V 4000
C13R C15
Rated power
2×1119KW 2×1119KW 2×1150KW
@1 800 min-1 (rpm)
(1500HP) (1500HP) (1542HP)
ISO14396
Piston displacement 2×50.0L 2×50.0L 2×57.2L
No. of cylinder 2×16 2×16 2×12
Hydraulic system
8×375L/min, 8×375L/min,
Max.oil flow
4×425L/min 4×425L/min
Implement Circuits
(attachment)
2
Travel Circuits 29.4MPa(300kgf/cm ) 29.4MPa(300kgf/cm2)
Upperstructure
Undercarriage
Travel speeds:

Model EX8000-6 EX8000-7

Bucket Range
43.0-48.0m3 43.0-48.0m3
Engine
12V 4000 12V 4000
C33 C35
Rated power
2×1450kW 2×1450KW 2×1500KW
@1 800 min-1 (rpm) 2×1450kW(1944HP)
(1944HP) (1944HP) (2011HP)
ISO14396
Hydraulic system
Implement Circuits
(attachment)
2
Travel Circuits 29.4MPa(300kgf/cm ) 29.4MPa(300kgf/cm2)
2
Pilot Circuits 4.4MPa(45kgf/cm ) 4.0MPa(41kgf/cm2)
Upperstructure
Undercarriage
Travel speeds:

with electric Drive
Model EX1900E-6 EX2600E-6 EX3600E-6

Power output 610kW 860kW 1200kW
Operating weight 191000* 250000** 350000**
Bucket Range
4.4-12.0m3 17.0m3 22.0m3
Electric motor
Type HITACHI TFOA-KK HITACHI TFOA-KK HITACHI TFOA-KK
Number of Motors 1 1 1
AC6000V/50Hz AC6000V/50Hz AC6000V/50Hz
Voltage
Synchronous RPM 1500min-1/50Hz 1500min-1/50Hz 1500min-1/50Hz
1800min-1/60Hz 1800min-1/60Hz 1800min-1/60Hz
Rated Current 69A@6600V 92A@6600V 124A@6600V
Insulation current F class B raise F class B raise F class B raise
Hydraulic system
Max.oil flow 6×335L/min 4×375L/min,2×425L/min 8×500L/min
Implement Circuits (attachment) 29.4MPa(300kgf/cm2) 29.4MPa(300kgf/cm2) 29.4MPa(300kgf/cm2)
Upperstructure
Bucket digging Force ISO 671kN(68400kgf) 830kN(84600kgf) 1050kN(107000kgf)
Arm crowd Force ISO 620kN(63200kgf) 785kN(80000kgf) 951kN(97000kgf)
Undercarriage
Travel speeds:
** BE-front configuration

with electric Drive
Model EX5600E-6 EX8000E-6

Power output 860×2kW 1200×2kW
Operating weight 531000** 820000**
Bucket Range
34.0m3 43-48m3
Electric motor
Type HITACHI TFOA-KK HITACHI TFOA-KK
Number of Motors 2 2
AC6000V/50Hz AC6000V/50Hz
Voltage
Synchronous RPM 1500min-1/50Hz 1500min-1/50Hz
1800min-1/60Hz 1800min-1/60Hz
Rated Current 97A×2@6600V 124A×2@6600V
Insulation current F class B raise F class B raise
Hydraulic system
Max.oil flow 8×375L/min,4×425L/min 16×500L/min
Implement Circuits (attachment) 29.4MPa(300kgf/cm2) 29.4MPa(300kgf/cm2)
Upperstructure
Undercarriage
Travel speeds:
** BE-front configuration

Mining Excavators ・Loading shovel Configuration
Model EX1200-6 EX1200-7 EX1900-6

Operating weight 114000kg 118000kg* 191000kg
Bucket Range
5.9-6.5m3 5.9-6.5m3 8.8-12.0m3
Engine
Number of Engines 1 1 1
Engine manufacture Cummins Cummins Cummins
Engine model QSK23-C QSK23-C QSKTA38-CE
Rated power
567kW 567kW 810kW
@1 800 min-1 (rpm)
(760HP) (760HP) (1086HP)
ISO14396
Emission certification U.S.EPA Tier Ⅱ FCO T4F U.S.EPA Tier Ⅱ
Hydraulic system
Max.oil flow 3×520L/min 3×520L/min 6×335L/min
Implement Circuits
31.9MPa(325kgf/cm2) 31.9MPa(325kgf/cm2) 29.4MPa(300kgf/cm2)
(attachment)
Fuel Tank Capacity 1470L 1700L 4140L
Upperstructure
Bucket digging Force 709kN(72300kgf) 709kN(72300kgf) 754kN(76900kgf)
Arm crowding force on
585kN(59700kgf) 585kN(59700kgf) 720kN(73500kgf)
ground
Undercarriage
Travel speeds:
*: U.S.EPA Tier 4 Final,

Model EX2600-6 EX2600-7

Operating weight 252000kg 259000kg*
Bucket Range
15.0-16.5m3 15.0-16.5m3
Engine
12V 4000 12V 4000
C13R C15
Rated power
1119KW 1119KW 1150KW
@1 800 min-1 (rpm)
(1500HP) (1500HP) (1542HP)
ISO14396
Hydraulic system
4×375L/min, 4×375L/min,
Max.oil flow
2×425L/min 2×425L/min
Implement Circuits
(attachment)
Upperstructure
Bucket digging Force 943kN(96200kgf) 943kN(96200kgf)
918kN(93600kgf) 918kN(93600kgf)
ground
Undercarriage
Travel speeds:
*: U.S.EPA Tier 4 Final

Model EX3600-6 EX3600-7

Bucket Range
21.0-23.0m3 22.0m3
Engine
12V 4000 12V 4000
C33 C35
Rated power
1450kW 1450kW 1450KW 1500KW
@1 800 min-1 (rpm)
(1944HP) (1944HP) (1944HP) (2011HP)
ISO14396
Hydraulic system
Implement Circuits
(attachment)
Upperstructure
1108kN(113000kgf) 1190kN(155000kgf)
ground
Undercarriage
Travel speeds:

Model EX5600-6 EX5600-7

Bucket Range
27.0-29.0m3 27.0-29.0m3
Engine
12V 4000 12V 4000
C13R C15
Rated power
2×1119KW 2×1119KW 2×1150KW
@1 800 min-1 (rpm)
(1500HP) (1500HP) (1542HP)
ISO14396
Hydraulic system
8×375L/min, 8×375L/min
Max.oil flow
4×425L/min ,4×425L/min
Implement Circuits
(attachment)
Upperstructure
1520kN(155000kgf) 1520kN(155000kgf)
ground
Undercarriage
Travel speeds:

Model EX8000-6 EX8000-7

Bucket Range
40.0-43.0m3 43.0m3
Engine
12V 4000 12V 4000
C33 C35
Rated power
2×1450kW 2×1450KW 2×1500KW
@1 800 min-1 (rpm) 2×1450kW(1944HP)
(1944HP) (1944HP) (2011HP)
ISO14396
Hydraulic system
Implement Circuits
(attachment)
Upperstructure
2870kN(293000kgf) 2420kN(246800kgf)
ground
Undercarriage
Travel speeds:


with electric Drive
Model EX1900E-6 EX2600E-6 EX3600E-6

Power output 610kW 860kW 1200kW
Operating weight 190000kg 248000kg 353000kg
Bucket Range
8.8-12.0m3 15.0-16.5m3 21.0-23.0m3
Electric motor
Type HITACHI TFOA-KK HITACHI TFOA-KK HITACHI TFOA-KK
Number of Motors 1 1 1
Voltage
Synchronous RPM 1500min-1/50Hz 1500min-1/50Hz 1500min-1/50Hz
1800min-1/60Hz 1800min-1/60Hz 1800min-1/60Hz
Rated Current 69A@6600V 92A@6600V 124A@6600V
Insulation current F class B raise F class B raise F class B raise
Hydraulic system
Max.oil flow 6×335L/min 4×375L/min,2×425L/min 8×500L/min
Implement Circuits (attachment) 29.4MPa(300kgf/cm2) 29.4MPa(300kgf/cm2) 29.4MPa(300kgf/cm2)
Upperstructure
Bucket digging Force 754kN(76900kgf) 943kN(96200kgf) 1166kN(119000kgf)
Arm crowding force on ground 720kN(73500kgf) 918kN(93600kgf) 1108kN(113000kgf)
Undercarriage
Travel speeds:

with electric Drive
Model EX5600E-6 EX8000E-6

Power output 860×2kW 1200×2kW
Operating weight 527000kg 808000kg
Bucket Range
27.0-29.0m3 40.0-43.0m3
Electric motor
Type HITACHI TFOA-KK HITACHI TFOA-KK
Number of Motors 2 2
Voltage
Synchronous RPM 1500min-1/50Hz 1500min-1/50Hz
1800min-1/60Hz 1800min-1/60Hz
Rated Current 97A×2@6600V 124A×2@6600V
Insulation current F class B raise F class B raise
Hydraulic system
Max.oil flow 8×375L/min,4×425L/min 16×500L/min
Implement Circuits (attachment) 29.4MPa(300kgf/cm2) 29.4MPa(300kgf/cm2)
Upperstructure
Arm crowding force on ground 1520kN(155000kgf) 2870kN(293000kgf)
Undercarriage
Travel speeds:

Hydraulic Working Range/Digging Forces
EX1200‐6
※Illustration shows the machine equipped with

9.0m boom, 3.6 m arm, and 5.2 m3(PCSA heaped) bucket.
Unit: mm
Boom length 7.55m(BE-boom) 9.0m
Arm length 3.4m(BE-arm) 3.6m
3
Bucket capacity(SAE,PCSA heaped) 6.7m 5.2m3
3
Digging material density 1800kg/m or less
A Max. digging reach 13750 15350
A' Max. digging reach(on ground) 13360 15010
B Max. digging depth 8050 9380
B' Max. digging depth(2.5m level) 7920 9260
C Max. cutting height 12410 13460
D Max. dumping height 8050 9080
D' Min. dumping height 3330 4160
E Min. swing radius 6770 7740
F Max. vertical wall 5180 6450
G Min. level crowding distance 4130 5790
569kN 482kN
ISO
(58000kgf) (492000kgf)
Bucket digging force
SAE,PCS 512kN 440kN
A (52200kgf) (44900kgf)
438kN 430kN
ISO
(44700kgf) (43900kgf)
Arm crowd force
SAE,PCS 425kN 422kN
A (43400kgf) (43000kgf)

EX1200‐7

9.0m boom, 3.6 m arm, and 5.2 m3(PCSA heaped) bucket.
Unit: mm
7.55m
Boom length 9.0m
BE-boom
3.4m
Arm length 3.6m
BE-arm
Bucket capacity(ISO 7451 heaped 1:1) 7.0m3 5.2m3
Digging material density 1800kg/m3 or less
A Max. digging reach 13790 15350
A' Max. digging reach(on ground) 13410 15010
B' Max. digging depth(2.5m level) 7960 9260
C Max. cutting height 12340 13460
D' Min. dumping height 3220 4160
G Min. level crowding distance 4210 5790
569kN 482kN
Bucket digging force ISO
(58000kgf) (492000kgf)
438kN 430kN
Arm crowd force ISO
(44700kgf) (43900kgf)

EX1900‐6,EX1900E‐6

8.3m boom, 3.6 m arm, and 12.0m3(SAE,PCSA heaped) bucket.
Unit: mm
Boom length 8.3m 8.7m
Arm length 3.6m 4.0m 5.5m
Bucket capacity(SAE,PCSA heaped) 12.0m3 9.6m3 8.0m3
A Max. digging reach 15250 16070 17500
A' Max. digging reach(on ground) 14770 15630 17090
B Max. digging depth 8180 9230 10730
B' Max. digging depth(2.5m level) 8070 9120 10640
C Max. cutting height 14140 14480 15010
D Max. dumping height 9060 9200 9810
D' Min. dumping height 4060 3560 2060
E Min. swing radius 7140 7760 7710
F Max. vertical wall 5520 6630 7430
G Min. level crowding distance 4480 5230 4810
671kN 649kN 651kN
ISO
(68400kgf) (66200kgf) (66400kgf)
617kN 588kN 588kN
SAE,PCSA
(62900kgf) (60000kgf) (60000kgf)
620kN 575kN 545kN
ISO
(63200kgf) (58600kgf) (55600kgf)
Arm crowd force
609kN 559kN 534kN
SAE,PCSA
(62100kgf) (57000kgf) (54400kgf)

EX2600‐6,EX2600E‐6
Unit: mm
BE-boom length 8.7m
BE-arm length 3.9m
Bucket capacity(SAE,PCSA heaped) 17.0m3
A Max. digging reach 16600
A' Max. digging reach(on ground) 16050
B Max. digging depth 8250
B' Max. digging depth(2.5m level) 8150
C Max. cutting height 15800
D Max. dumping height 10100
D' Min. dumping height 4250
E Min. swing radius 7990
F Max. vertical wall 4110
G Min. level crowding distance 4900
830kN
ISO
(84600kgf)
760kN
SAE,PCSA
(77500kgf)
785kN
ISO
(80000kgf)
Arm crowd force
765kN
SAE,PCSA
(78000kgf)

EX2600‐7
Unit: mm
BE-boom length 8.7m
BE-arm length 3.9m
Bucket capacity(ISO 7451 heaped 1:1) 17.0m3
830kN
(84600kgf)
785kN
Arm crowd force ISO
(80000kgf)

EX3600‐6,EX3600E‐6
Unit: mm
BE-boom length 9.6m
BE-arm length 4.5m
1050kN
ISO
(107000kgf)
932kN
SAE:PCSA
(95000kgf)
951kN
ISO
(97000kgf)
Arm crowd force
922kN
SAE:PCSA
(94000kgf)

EX3600‐7
Unit: mm
BE-boom length 9.6m
BE-arm length 4.5m
1050kN
(107000kgf)
951kN
Arm crowd force ISO
(97000kgf)

EX5600‐6,EX5600E‐6
Unit: mm
BE-boom length 10.1m
BE-arm length 5.0m
1480kN
ISO
(151000kgf)
1370kN
SAE:PCSA
(140000kgf)
1300kN
ISO
(133000kgf)
Arm crowd force
1280kN
SAE:PCSA
(131000kgf)

EX5600‐7
Unit: mm
BE-arm length 5.0m
1480kN
(151000kgf)
1300kN
Arm crowd force ISO
(133000kgf)

EX8000‐6,EX8000E‐6
Unit: mm
BE-arm length 5.8m
2020kN
ISO
(206000kgf)
1900kN
SAE:PCSA
(193400kgf)
1770kN
ISO
(180700kgf)
Arm crowd force
1750kN
SAE:PCSA
(178300kgf)

EX8000‐7
Unit: mm
BE-arm length 5.8m
2020kN
(206000kgf)
1770kN
Arm crowd force ISO
(180700kgf)

EX1200‐6
Unit: mm
Boom length 5.2m
Arm length 4.0m
Bucket capacity(heaped) 6.5m3
A Min. digging distance 4510
B Min. level crowding distance 6580
C Level crowding distance 4370
D Max. digging reach 11500
E Max. cutting height 12410
E' Max. dumping height 8750
F Max. digging depth 4780
G Working radius at max.
6140
dumping height
H Max. bucket opening width 1880
Arm crowding force 585kN
on ground (59700kgf)
709kN
(72300kgf)

EX1200‐7
Unit: mm
Boom length 5.2m
Arm length 4.0m
6140
dumping height
H Max.bucket opening width 1880
709kN
(72300kgf)

EX1900‐6,EX1900E‐6
Unit: mm
Boom length 6.2m
Arm length 4.4m
Bucket capacity(SAE,PCSA heaped) 11m3
G Working radius at max. 6890
dumping height
8.8m3
Arm crowding force 720kN(73500kgf)
11.0m3
on ground
12.0m3 655kN(66800kgf)
8.8m3
754kN(76900kgf)
Bucket digging force 11.0m3
12.0m3 687kN(70100kgf)

EX2600‐6,EX2600E‐6

15.0m3(heaped) bucket.
Unit: mm
Boom length 6.6m
Arm length 4.6m
Bucket capacity(SAE,PCSA heaped) 15.0m3 16.5m3
Digging material density 1800kg/m3 or less 1600kg/m3 or less
A Min. digging distance 5340 5200
C Level crowding distance 4980 4960
E' Min. dumping height 10350 10350
8140 8140
dumping height
H Max.bucket opening width 2150 2150
Arm crowding force 918kN 907kN
on ground (93600kgf) (92500kgf)
943kN 873kN
(96200kgf) (89000kgf)

EX2600‐7

Unit: mm
Boom length 6.6m
Arm length 4.6m
B Min. level crowding distance 7980 8240
D Max. digging reach 14060 14300
E Max. cutting height 15010 15250
E' Max. dumping height 10350 10350
F Max. digging depth 3720 3960
8140 8140
dumping height
H Max. bucket opening width 2150 2150
943kN 873kN
(96200kgf) (89000kgf)

EX3600‐6,EX3600E‐6
Unit: mm
Boom length 7.1m
Arm length 4.7m
8650 8650
dumping height
1166kN 1137kN
(119000kgf) (116000kgf)

EX3600‐7
Unit: mm
Boom length 7.1m
Arm length 4.7m
8650
dumping height
1030kN
(105000kgf)

EX5600‐6,EX5600E‐6

Unit: mm
Boom length 7.7m
Arm length 5.3m
8900 8900
dumping height
1710kN 1590kN
(174000kgf) (162000kgf)

EX5600‐7

Unit: mm
Boom length 7.7m
Arm length 5.3m
8900 8900
dumping height
1710kN 1590kN
(174000kgf) (162000kgf)

EX8000‐6,EX8000E‐6
Unit: mm
Boom length 8.6m
Arm length 5.7m
10900
dumping height
2870kN
Crowding force
(293000kgf)
2230kN
Breakout force
(227000kgf)

EX8000‐7
Unit: mm
Boom length 8.6m
Arm length 5.7m
10900
dumping height
2420kN
Crowding force
(246800kgf)
2230kN
Breakout force
(227400kgf)

Hydraulic General Dimensions
Mining Excavators
EX1200‐6
EX1200‐7
L
EX1200-6 EX1200-7
A Distance between tumblers 5090mm 5090mm
B Undercarriage length 6500mm 6500mm
C Counterweight clearance 1820mm 1820mm
D Rear-end swing radius 4850mm 4900mm
D' Rear-end length 4740mm 4900mm
E Overall width of upper structure 5380mm 5410mm
F Overall height of cab 4350mm(BH) 4350mm(BH)
5440mm(LD) 5440mm(LD)
G Minimum ground clearance 1020mm 1020mm
H Track gauge 3900mm 3900mm
I Track shoe width 700mm 900mm 700mm 900mm
J Undercarriage width 4600mm 4800mm 4600mm 4800mm
K Track height 1660mm 1660mm
L Overall width 5430mm 5470mm

Mining Excavators
EX1900‐6,EX1900E‐6
EX1900-6
A Distance between tumblers 5780mm
B Undercarriage length 7480mm
C Counterweight clearance 1920mm
D Rear-end swing radius 6035mm
D' Rear-end length 5990mm
E Overall width of upper structure 6430mm
E' Overall width(Ladder retracted) 6660mm
F Overall height of cab 6990mm
G Minimum ground clearance 795mm
I Track shoe width 800mm
J Undercarriage width 5620mm
K Track height 1880mm
M Crawler width 5400mm

Mining Excavators
EX2600‐6,EX2600E‐6
EX2600‐7
EX2600-6 EX2600-7
F Overall height of cab 7250mm 7250mm
I Track shoe width 1000mm 1000mm
J Undercarriage width 6000mm 6000mm

Mining Excavators
EX3600‐6,EX3600E‐6
EX3600‐7
EX3600-6 EX3600-7

Mining Excavators
EX5600‐6,EX5600E‐6
EX5600‐7
EX5600-6 EX5600-7

Mining Excavators
EX8000‐6,EX8000E‐6
EX8000‐7
EX8000-6 EX8000-7

Hydraulic Ground Pressure
Mining Excavators
Ground pressure is the weight of a hydraulic excavator acting on a unit area of the ground, as determined below.
Operating weight
Ground pressure ൌ
Total ground contact area
*Total ground contact area = (L + 0.35h)× shoe width × 2
where, L: Center-to-center distance between tumblers

h: Height of crawler
Note that ground pressure under the rollers will be occasionally increased several
times as calculated above.
Ground pressure is a good guideline to prejudge which size of hydraulic excavator
can operate on soft ground or rough terrain without settlement.
Generally speaking, it is difficult to reduce the weights of major components from
the design standpoint. Thus, there is the tendency that the greater the machine,
the heavier the ground pressure.

Mining Excavators ・Backhoe Configurations
Backhoe Configurations
Emission Engine Shoe width Operating Weight Ground Pressure

Model Front Track shoe type
certification model (mm) (Kg) (kPa) (kgf/cm2)
EX1200-6 Tier2 Cummins 700 111000 142 1.45
Standard Double Grousers
900 113000 112 1.14
700 112000 143 1.46
BE-front Double Grousers
900 114000 113 1.15
EX1200-7 Tier4 Final Cummins 700 117000 148 1.51
900 118000 116 1.19
700 119000 150 1.53
900 120000 118 1.21
FCO Cummins 700 115000 145 1.48
900 116000 114 1.17
700 117000 148 1.51
900 118000 116 1.19
EX1900-6 Tier2 Cummins Standard Triple Grousers 800 192000 184 1.88
EX2600-6 Tier2 Cummins BE-front Triple Grousers 1000 254000 185 1.89
EX2600-7 Tier4 Final Cummins 257000 187 1.91
MTU 259000 189 1.93
BE-front Triple Grousers 1000
FCO Cummins 256000 187 1.91
MTU 258000 188 1.92
MTU 367000 192 1.96
FCO Cummins 366000 192 1.96
MTU 367000 192 1.96
MTU 553000 246 2.51
FCO Cummins 545000 244 2.49
MTU 553000 248 2.53
MTU 840000 253 2.58
FCO Cummins 839000 252 2.57
MTU 838000 252 2.57

Mining Excavators ・Loading shovel Configurations
Loading shovel Configurations
Emission Engine Shoe width Operating Weight Ground Pressure

Model Front Track shoe type
certification model (mm) (Kg) (kPa) (kgf/cm2)
EX1200-6 Tier2 Cummins Standard Double Grousers 700 114000 146 1.49
EX1200-7 Tier4 Final 118000 149 1.52
Cummins Standard Double Grousers 700
FCO 117000 148 1.51
EX2600-7 Tier 4 Final Cummins 259000 189 1.93
MTU 261000 190 1.94
Standard Triple Grousers 1000
FCO Cummins 258000 188 1.92
MTU 260000 189 1.93
MTU 366000 192 1.96
FCO Cummins 365000 191 1.95
MTU 366000 192 1.96
MTU 549000 246 2.51
FCO Cummins 541000 242 2.47
MTU 549000 246 2.51
MTU 828000 249 2.54
FCO Cummins 827000 249 2.54
MTU 826000 248 2.53

Hydraulic Ground Pressure(Electric drive)
Mining Excavators ・Backhoe Configurations
・Loading shovel Configurations
Backhoe Configurations
Model Front Track shoe type Shoe width Operating Weight Ground Pressure
(mm) (Kg) (kPa) (kgf/cm2)
EX1900E-6 Standard Triple Grousers 800 191000 183 1.87
EX2600E-6 BE-front Triple Grousers 1000 250000 182 1.86
Loading shovel Configurations
Model Front Track shoe type Shoe width Operating Weight Ground Pressure
(mm) (Kg) (kPa) (kgf/cm2)

Hydraulic Cycle time
Mining Excavators
The “cycle time” stated in this handbook defines “A complete working cycle” and it can be separated into four
segments. Bucket fill/ Swing/ Dump/ Swing. This is an important factor for the production. The cycle time of each
model is described on next page. These cycle times are prepared based on theoretical calculation from simulation
and other method, measurements under certain conditions and our experience. The cycle time may be subject to
significant change due to various factors such as operator skill, characteristic of digging subject materials, ground
conditions, altitude, climate, etc. and the cycle time may change even if the Machine was operated under the same
condition when the cycle time were collected. HCM cannot and does not guarantee that the Machine will perform
exactly as the Data show under any condition. When you refer to this chart, please be careful about the following
points.
・Cycle times in this chart is the time in the case of operated by well skilled operator.
・Cycle times in this chart is the time under the following conditions.
Backhoe excavator Loading excavator

Swing angle 45° 60°
Less than 60% Less than 60%
Digging(cutting) depth
of max digging depth of max cutting height
Well matched dump truck Well matched dump truck
Dump position
on the lower level on the same level
Favorable Favorable
Digging subject condition Normal Normal
Severe Severe
Digging subject condition is stated as following.
Favorable ・・・ Small impact to machine processing of low specific weight materials.
Normal ・・・ Continuous digging work in layer of clay.
Severe ・・・ High impact bedrock. Heavy digging work.

Hydraulic Cycle time
Mining Excavators
Cycle time Estimating chart（Backhoe)
Cycle time Estimating chart（Loading shovel)

Hydraulic Production Overviews
Mining Excavators
Production Overviews
The productivity of hydraulic mining excavator depends on various factors as following.
・Machine specification
・Characteristics of digging subject material
・Operator skill
・Job efficiency
・Truck spotting time
Etc.
The following charts shows a rough estimation of the productivity (ton/hour) under various situations※ in the
combination of Hitachi hydraulic excavator / trucks.
※The range of factors which are considered here is as following.

-Fill factor：70%~100%
-Truck spotting time：30(s)～75(s)
-Job efficiency1)：65%(39min./60min.)～90%(54min./60min.)
1)：“Job efficiency” is not including truck spotting time. It includes only the time related with excavator such as excavator operator’s
skill.

Mining Excavators
EX1200-6(Backhoe)
Bucket size:6.7m3, 4 pass to Dump truck, Material Density: 1.8ton/m3
Job efficiency(%) 90% 83% 73% 65%

Truck
Fill factor Load per Load per Spotting
30(s) 45(s) 60(s) 75(s) 30(s) 45(s) 60(s) 75(s) 30(s) 45(s) 60(s) 75(s) 30(s) 45(s) 60(s) 75(s)
(%) bucket(t) truck(t) Cycle
time
18(s) 1822 1551 1350 1195 1680 1430 1245 1102 1478 1258 1095 969 1316 1120 975 863
100% 12.1 48.2 22(s) 1592 1381 1219 1091 1468 1273 1124 1007 1291 1120 989 885 1150 997 881 788
26(s) 1413 1244 1112 1004 1303 1148 1025 926 1146 1009 902 815 1021 899 803 725
18(s) 1639 1396 1215 1075 1512 1287 1120 992 1330 1132 985 872 1184 1008 877 777
90% 10.9 43.4 22(s) 1432 1243 1097 982 1321 1146 1012 906 1162 1008 890 797 1035 897 792 709
26(s) 1272 1120 1000 904 1173 1033 923 834 1032 908 812 733 919 809 723 653
18(s) 1457 1240 1080 956 1344 1144 996 882 1182 1006 876 775 1053 896 780 690
80% 9.6 38.6 22(s) 1273 1105 975 873 1174 1019 899 805 1033 896 791 708 920 798 704 631
26(s) 1131 996 889 804 1043 918 820 741 917 807 721 652 817 719 642 580
18(s) 1275 1085 945 836 1176 1001 871 771 1034 880 766 678 921 784 682 604
70% 8.4 33.8 22(s) 1114 967 853 764 1027 891 787 705 904 784 692 620 805 698 616 552
26(s) 989 871 778 703 912 803 718 648 802 707 631 570 714 629 562 508
(t/hour)
EX1200-7(Backhoe)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
18(s) 1903 1620 1410 1248 1755 1494 1300 1151 1544 1314 1144 1013 1375 1170 1018 902
100% 12.6 50.4 22(s) 1663 1443 1274 1140 1534 1330 1175 1052 1349 1170 1033 925 1201 1042 920 824
26(s) 1476 1300 1161 1049 1362 1199 1071 968 1198 1055 942 851 1066 939 839 758
18(s) 1713 1458 1269 1124 1580 1345 1170 1036 1389 1183 1029 911 1237 1053 917 811
90% 11.3 45.4 22(s) 1497 1298 1146 1026 1380 1197 1057 946 1214 1053 930 832 1081 938 828 741
26(s) 1329 1170 1045 945 1225 1079 964 871 1078 949 848 766 960 845 755 682
18(s) 1523 1296 1128 999 1404 1195 1040 921 1235 1051 915 810 1100 936 815 721
80% 10.1 40.3 22(s) 1330 1154 1019 912 1227 1064 940 841 1079 936 827 740 961 833 736 659
26(s) 1181 1040 929 840 1089 959 857 774 958 844 754 681 853 751 671 606
18(s) 1332 1134 987 874 1229 1046 910 806 1081 920 801 709 962 819 713 631
70% 8.8 35.3 22(s) 1164 1010 892 798 1073 931 822 736 944 819 723 647 841 729 644 577
26(s) 1034 910 813 735 953 839 750 677 838 738 659 596 746 657 587 531
(t/hour)

Mining Excavators
EX1900-6,EX1900E-6(Backhoe)
Bucket size:12m3, 5 pass to Dump truck, Material Density: 1.8ton/m3
Job efficiency(%) 90% 83% 73% 65%

Truck
time
21(s) 3014 2669 2395 2172 2780 2462 2209 2003 2445 2165 1943 1762 2177 1928 1730 1569
100% 21.6 108.0 25(s) 2641 2372 2153 1971 2436 2188 1986 1818 2142 1924 1747 1599 1907 1713 1555 1424
29(s) 2350 2135 1956 1805 2167 1969 1804 1664 1906 1732 1586 1464 1697 1542 1413 1303
21(s) 2713 2402 2156 1955 2502 2215 1988 1803 2200 1948 1748 1586 1959 1735 1557 1412
90% 19.4 97.2 25(s) 2377 2135 1938 1774 2192 1969 1787 1636 1928 1732 1572 1439 1717 1542 1400 1281
29(s) 2115 1921 1760 1624 1951 1772 1623 1498 1716 1559 1428 1317 1528 1388 1271 1173
21(s) 2411 2135 1916 1738 2224 1969 1767 1603 1956 1732 1554 1409 1741 1542 1384 1255
80% 17.3 86.4 25(s) 2113 1898 1723 1577 1948 1750 1589 1454 1714 1539 1397 1279 1526 1371 1244 1139
29(s) 1880 1708 1565 1444 1734 1575 1443 1331 1525 1385 1269 1171 1358 1234 1130 1043
21(s) 2110 1868 1677 1520 1946 1723 1546 1402 1711 1515 1360 1233 1524 1349 1211 1098
70% 15.1 75.6 25(s) 1849 1661 1507 1380 1705 1531 1390 1273 1499 1347 1223 1119 1335 1199 1089 997
29(s) 1645 1494 1369 1263 1517 1378 1263 1165 1334 1212 1111 1025 1188 1079 989 912
(t/hour)

Mining Excavators
Job efficiency(%) 90% 83% 73% 65%

Truck
time
23(s) 4150 3808 3518 3270 3827 3512 3245 3015 3366 3089 2854 2652 2997 2750 2541 2361
100% 30.6 214.2 27(s) 3621 3358 3131 2933 3340 3097 2888 2705 2937 2724 2540 2379 2615 2425 2261 2118
31(s) 3212 3004 2821 2659 2962 2770 2601 2452 2605 2436 2288 2156 2320 2169 2037 1920
23(s) 3735 3427 3167 2943 3444 3161 2920 2714 3029 2780 2568 2387 2697 2475 2287 2125
90% 27.5 192.8 27(s) 3259 3023 2818 2639 3006 2787 2599 2434 2643 2452 2286 2141 2354 2183 2035 1906
31(s) 2891 2703 2539 2393 2666 2493 2341 2207 2345 2193 2059 1941 2088 1952 1833 1728
23(s) 3320 3046 2815 2616 3061 2809 2596 2412 2693 2471 2283 2122 2398 2200 2033 1889
80% 24.5 171.4 27(s) 2897 2687 2505 2346 2672 2478 2310 2164 2350 2179 2032 1903 2092 1940 1809 1694
31(s) 2570 2403 2256 2127 2370 2216 2081 1961 2084 1949 1830 1725 1856 1735 1630 1536
23(s) 2905 2666 2463 2289 2679 2458 2271 2111 2356 2162 1998 1857 2098 1925 1779 1653
70% 21.4 149.9 27(s) 2535 2351 2192 2053 2338 2168 2021 1893 2056 1907 1778 1665 1831 1698 1583 1483
31(s) 2249 2103 1974 1861 2074 1939 1821 1716 1824 1705 1601 1509 1624 1519 1426 1344
(t/hour)
EX2600-7(Backhoe)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
23(s) 4150 3808 3518 3270 3827 3512 3245 3015 3366 3089 2854 2652 2997 2750 2541 2361
100% 30.6 214.2 27(s) 3621 3358 3131 2933 3340 3097 2888 2705 2937 2724 2540 2379 2615 2425 2261 2118
31(s) 3212 3004 2821 2659 2962 2770 2601 2452 2605 2436 2288 2156 2320 2169 2037 1920
23(s) 3735 3427 3167 2943 3444 3161 2920 2714 3029 2780 2568 2387 2697 2475 2287 2125
90% 27.5 192.8 27(s) 3259 3023 2818 2639 3006 2787 2599 2434 2643 2452 2286 2141 2354 2183 2035 1906
31(s) 2891 2703 2539 2393 2666 2493 2341 2207 2345 2193 2059 1941 2088 1952 1833 1728
23(s) 3320 3046 2815 2616 3061 2809 2596 2412 2693 2471 2283 2122 2398 2200 2033 1889
80% 24.5 171.4 27(s) 2897 2687 2505 2346 2672 2478 2310 2164 2350 2179 2032 1903 2092 1940 1809 1694
31(s) 2570 2403 2256 2127 2370 2216 2081 1961 2084 1949 1830 1725 1856 1735 1630 1536
23(s) 2905 2666 2463 2289 2679 2458 2271 2111 2356 2162 1998 1857 2098 1925 1779 1653
70% 21.4 149.9 27(s) 2535 2351 2192 2053 2338 2168 2021 1893 2056 1907 1778 1665 1831 1698 1583 1483
31(s) 2249 2103 1974 1861 2074 1939 1821 1716 1824 1705 1601 1509 1624 1519 1426 1344
(t/hour)

Mining Excavators
Job efficiency(%) 90% 83% 73% 65%

Truck
time
23(s) 5248 4674 4214 3836 4839 4311 3886 3537 4256 3791 3418 3111 3790 3376 3043 2770
100% 39.6 198.0 27(s) 4627 4175 3804 3493 4267 3850 3508 3221 3753 3387 3085 2833 3342 3015 2747 2523
31(s) 4138 3773 3467 3207 3816 3479 3197 2957 3356 3060 2812 2601 2988 2725 2504 2316
23(s) 4723 4207 3792 3452 4356 3880 3497 3184 3831 3412 3076 2800 3411 3038 2739 2493
90% 35.6 178.2 27(s) 4164 3758 3423 3144 3840 3465 3157 2899 3378 3048 2777 2550 3007 2714 2473 2271
31(s) 3724 3395 3120 2886 3434 3131 2877 2662 3020 2754 2531 2341 2689 2452 2253 2084
23(s) 4198 3739 3371 3069 3872 3448 3109 2830 3405 3033 2734 2489 3032 2701 2435 2216
80% 31.7 158.4 27(s) 3702 3340 3043 2795 3414 3080 2806 2577 3002 2709 2468 2267 2673 2412 2198 2018
31(s) 3310 3018 2773 2565 3053 2783 2558 2366 2685 2448 2250 2081 2391 2180 2003 1853
23(s) 3673 3272 2950 2685 3388 3017 2720 2476 2979 2654 2392 2178 2653 2363 2130 1939
70% 27.7 138.6 27(s) 3239 2923 2663 2445 2987 2695 2456 2255 2627 2371 2160 1983 2339 2111 1923 1766
31(s) 2896 2641 2427 2245 2671 2435 2238 2070 2349 2142 1968 1821 2092 1907 1753 1621
(t/hour)
EX3600-7(Backhoe)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
23(s) 5248 4674 4214 3836 4839 4311 3886 3537 4256 3791 3418 3111 3790 3376 3043 2770
100% 39.6 198.0 27(s) 4627 4175 3804 3493 4267 3850 3508 3221 3753 3387 3085 2833 3342 3015 2747 2523
31(s) 4138 3773 3467 3207 3816 3479 3197 2957 3356 3060 2812 2601 2988 2725 2504 2316
23(s) 4723 4207 3792 3452 4356 3880 3497 3184 3831 3412 3076 2800 3411 3038 2739 2493
90% 35.6 178.2 27(s) 4164 3758 3423 3144 3840 3465 3157 2899 3378 3048 2777 2550 3007 2714 2473 2271
31(s) 3724 3395 3120 2886 3434 3131 2877 2662 3020 2754 2531 2341 2689 2452 2253 2084
23(s) 4198 3739 3371 3069 3872 3448 3109 2830 3405 3033 2734 2489 3032 2701 2435 2216
80% 31.7 158.4 27(s) 3702 3340 3043 2795 3414 3080 2806 2577 3002 2709 2468 2267 2673 2412 2198 2018
31(s) 3310 3018 2773 2565 3053 2783 2558 2366 2685 2448 2250 2081 2391 2180 2003 1853
23(s) 3673 3272 2950 2685 3388 3017 2720 2476 2979 2654 2392 2178 2653 2363 2130 1939
70% 27.7 138.6 27(s) 3239 2923 2663 2445 2987 2695 2456 2255 2627 2371 2160 1983 2339 2111 1923 1766
31(s) 2896 2641 2427 2245 2671 2435 2238 2070 2349 2142 1968 1821 2092 1907 1753 1621
(t/hour)

Mining Excavators
Job efficiency(%) 90% 83% 73% 65%

Truck
time
25(s) 7600 6816 6179 5651 7009 6286 5699 5211 6165 5529 5012 4583 5489 4923 4463 4081
100% 61.2 306.0 29(s) 6751 6126 5606 5168 6226 5649 5170 4766 5476 4969 4547 4192 4876 4424 4049 3732
33(s) 6073 5562 5130 4761 5601 5129 4731 4391 4926 4511 4161 3862 4386 4017 3705 3438
25(s) 6840 6135 5561 5086 6308 5658 5129 4690 5548 4976 4511 4125 4940 4431 4016 3673
90% 55.1 275.4 29(s) 6076 5513 5045 4651 5604 5084 4653 4289 4929 4472 4092 3772 4388 3982 3644 3359
33(s) 5466 5006 4617 4285 5041 4617 4258 3951 4433 4060 3745 3475 3948 3615 3335 3095
25(s) 6080 5453 4943 4521 5607 5029 4559 4169 4932 4423 4010 3667 4391 3938 3570 3265
80% 49.0 244.8 29(s) 5401 4901 4485 4134 4981 4519 4136 3813 4381 3975 3638 3353 3901 3539 3239 2986
33(s) 4859 4450 4104 3809 4481 4104 3785 3512 3941 3609 3329 3089 3509 3214 2964 2751
25(s) 5320 4771 4325 3956 4906 4400 3989 3648 4315 3870 3508 3208 3842 3446 3124 2857
70% 42.8 214.2 29(s) 4726 4288 3924 3617 4358 3954 3619 3336 3833 3478 3183 2934 3413 3097 2834 2613
33(s) 4251 3893 3591 3333 3921 3591 3312 3073 3448 3158 2913 2703 3070 2812 2594 2407
(t/hour)
EX5600-7(Backhoe)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
25(s) 7600 6816 6179 5651 7009 6286 5699 5211 6165 5529 5012 4583 5489 4923 4463 4081
100% 61.2 306.0 29(s) 6751 6126 5606 5168 6226 5649 5170 4766 5476 4969 4547 4192 4876 4424 4049 3732
33(s) 6073 5562 5130 4761 5601 5129 4731 4391 4926 4511 4161 3862 4386 4017 3705 3438
25(s) 6840 6135 5561 5086 6308 5658 5129 4690 5548 4976 4511 4125 4940 4431 4016 3673
90% 55.1 275.4 29(s) 6076 5513 5045 4651 5604 5084 4653 4289 4929 4472 4092 3772 4388 3982 3644 3359
33(s) 5466 5006 4617 4285 5041 4617 4258 3951 4433 4060 3745 3475 3948 3615 3335 3095
25(s) 6080 5453 4943 4521 5607 5029 4559 4169 4932 4423 4010 3667 4391 3938 3570 3265
80% 49.0 244.8 29(s) 5401 4901 4485 4134 4981 4519 4136 3813 4381 3975 3638 3353 3901 3539 3239 2986
33(s) 4859 4450 4104 3809 4481 4104 3785 3512 3941 3609 3329 3089 3509 3214 2964 2751
25(s) 5320 4771 4325 3956 4906 4400 3989 3648 4315 3870 3508 3208 3842 3446 3124 2857
70% 42.8 214.2 29(s) 4726 4288 3924 3617 4358 3954 3619 3336 3833 3478 3183 2934 3413 3097 2834 2613
33(s) 4251 3893 3591 3333 3921 3591 3312 3073 3448 3158 2913 2703 3070 2812 2594 2407
(t/hour)

Mining Excavators
Job efficiency(%) 90% 83% 73% 65%

Truck
time
27(s) 8944 7889 7057 6383 8249 7276 6508 5887 7255 6399 5724 5177 6460 5698 5096 4610
100% 77.4 309.6 31(s) 8054 7188 6490 5916 7427 6629 5986 5456 6533 5830 5265 4799 5817 5191 4688 4273
35(s) 7325 6602 6008 5513 6755 6088 5541 5084 5941 5355 4873 4472 5290 4768 4339 3982
27(s) 8050 7100 6351 5745 7424 6548 5857 5298 6529 5759 5151 4660 5814 5128 4587 4149
90% 69.7 278.6 31(s) 7248 6469 5841 5325 6685 5966 5387 4911 5879 5247 4738 4319 5235 4672 4219 3846
35(s) 6592 5941 5408 4962 6079 5479 4987 4576 5347 4819 4386 4025 4761 4291 3905 3583
27(s) 7155 6311 5645 5106 6599 5820 5206 4709 5804 5119 4579 4142 5168 4558 4077 3688
80% 61.9 247.7 31(s) 6443 5751 5192 4733 5942 5303 4789 4365 5226 4664 4212 3839 4653 4153 3750 3418
35(s) 5860 5281 4807 4410 5404 4870 4433 4067 4753 4284 3899 3577 4232 3814 3472 3185
27(s) 6261 5522 4940 4468 5774 5093 4555 4121 5078 4479 4007 3624 4522 3988 3568 3227
70% 54.2 216.7 31(s) 5638 5032 4543 4141 5199 4640 4190 3819 4573 4081 3685 3359 4072 3634 3281 2991
35(s) 5127 4621 4206 3859 4728 4262 3879 3559 4159 3748 3411 3130 3703 3337 3038 2787
(t/hour)
EX8000-7(Backhoe)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
27(s) 8944 7889 7057 6383 8249 7276 6508 5887 7255 6399 5724 5177 6460 5698 5096 4610
100% 77.4 309.6 31(s) 8054 7188 6490 5916 7427 6629 5986 5456 6533 5830 5265 4799 5817 5191 4688 4273
35(s) 7325 6602 6008 5513 6755 6088 5541 5084 5941 5355 4873 4472 5290 4768 4339 3982
27(s) 8050 7100 6351 5745 7424 6548 5857 5298 6529 5759 5151 4660 5814 5128 4587 4149
90% 69.7 278.6 31(s) 7248 6469 5841 5325 6685 5966 5387 4911 5879 5247 4738 4319 5235 4672 4219 3846
35(s) 6592 5941 5408 4962 6079 5479 4987 4576 5347 4819 4386 4025 4761 4291 3905 3583
27(s) 7155 6311 5645 5106 6599 5820 5206 4709 5804 5119 4579 4142 5168 4558 4077 3688
80% 61.9 247.7 31(s) 6443 5751 5192 4733 5942 5303 4789 4365 5226 4664 4212 3839 4653 4153 3750 3418
35(s) 5860 5281 4807 4410 5404 4870 4433 4067 4753 4284 3899 3577 4232 3814 3472 3185
27(s) 6261 5522 4940 4468 5774 5093 4555 4121 5078 4479 4007 3624 4522 3988 3568 3227
70% 54.2 216.7 31(s) 5638 5032 4543 4141 5199 4640 4190 3819 4573 4081 3685 3359 4072 3634 3281 2991
35(s) 5127 4621 4206 3859 4728 4262 3879 3559 4159 3748 3411 3130 3703 3337 3038 2787
(t/hour)

Mining Excavators
EX1200-6(Loading shovel)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
19(s) 1736 1482 1292 1146 1601 1366 1192 1057 1408 1202 1048 929 1254 1070 933 827
100% 11.7 46.8 23(s) 1520 1321 1169 1048 1402 1219 1078 966 1233 1072 948 850 1098 954 844 757
27(s) 1352 1193 1067 965 1247 1100 984 890 1097 967 865 783 976 861 770 697
19(s) 1562 1333 1163 1031 1441 1230 1072 951 1267 1081 943 836 1128 963 840 745
90% 10.5 42.1 23(s) 1368 1189 1052 943 1262 1097 970 869 1110 965 853 765 988 859 760 681
27(s) 1217 1073 960 868 1122 990 885 801 987 871 779 704 879 775 693 627
19(s) 1389 1185 1034 917 1281 1093 953 845 1126 961 838 743 1003 856 747 662
80% 9.4 37.4 23(s) 1216 1057 935 838 1122 975 862 773 986 857 758 680 878 763 675 605
27(s) 1082 954 853 772 998 880 787 712 877 774 692 626 781 689 616 557
19(s) 1215 1037 904 802 1121 956 834 740 986 841 734 650 878 749 653 579
70% 8.2 32.8 23(s) 1064 925 818 733 981 853 754 676 863 750 664 595 769 668 591 530
27(s) 946 835 747 675 873 770 689 623 768 677 606 548 684 603 539 488
(t/hour)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
19(s) 1736 1482 1292 1146 1601 1366 1192 1057 1408 1202 1048 929 1254 1070 933 827
100% 11.7 46.8 23(s) 1520 1321 1169 1048 1402 1219 1078 966 1233 1072 948 850 1098 954 844 757
27(s) 1352 1193 1067 965 1247 1100 984 890 1097 967 865 783 976 861 770 697
19(s) 1562 1333 1163 1031 1441 1230 1072 951 1267 1081 943 836 1128 963 840 745
90% 10.5 42.1 23(s) 1368 1189 1052 943 1262 1097 970 869 1110 965 853 765 988 859 760 681
27(s) 1217 1073 960 868 1122 990 885 801 987 871 779 704 879 775 693 627
19(s) 1389 1185 1034 917 1281 1093 953 845 1126 961 838 743 1003 856 747 662
80% 9.4 37.4 23(s) 1216 1057 935 838 1122 975 862 773 986 857 758 680 878 763 675 605
27(s) 1082 954 853 772 998 880 787 712 877 774 692 626 781 689 616 557
19(s) 1215 1037 904 802 1121 956 834 740 986 841 734 650 878 749 653 579
70% 8.2 32.8 23(s) 1064 925 818 733 981 853 754 676 863 750 664 595 769 668 591 530
27(s) 946 835 747 675 873 770 689 623 768 677 606 548 684 603 539 488
(t/hour)

Mining Excavators
EX1900-6,EX1900E-6(Loading shovel)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
22(s) 2715 2409 2165 1966 2504 2222 1997 1813 2202 1954 1756 1595 1961 1740 1564 1420
100% 19.8 99.0 26(s) 2384 2145 1949 1786 2199 1978 1798 1648 1934 1740 1581 1449 1722 1549 1408 1290
30(s) 2125 1933 1773 1637 1960 1783 1635 1510 1724 1568 1438 1328 1535 1396 1280 1182
22(s) 2443 2168 1949 1769 2253 1999 1797 1632 1982 1759 1581 1435 1765 1566 1407 1278
90% 17.8 89.1 26(s) 2146 1930 1754 1608 1979 1780 1618 1483 1740 1566 1423 1304 1550 1394 1267 1161
30(s) 1912 1740 1595 1473 1764 1604 1471 1359 1551 1411 1294 1195 1381 1256 1152 1064
22(s) 2172 1927 1732 1573 2003 1777 1597 1451 1762 1563 1405 1276 1569 1392 1251 1136
80% 15.8 79.2 26(s) 1907 1716 1559 1429 1759 1582 1438 1318 1547 1392 1265 1159 1377 1239 1126 1032
30(s) 1700 1546 1418 1310 1568 1426 1308 1208 1379 1254 1150 1062 1228 1117 1024 946
22(s) 1900 1686 1516 1376 1753 1555 1398 1269 1541 1368 1229 1116 1373 1218 1095 994
70% 13.9 69.3 26(s) 1669 1501 1365 1251 1539 1385 1258 1153 1354 1218 1107 1014 1205 1084 985 903
30(s) 1487 1353 1241 1146 1372 1248 1144 1057 1206 1097 1006 929 1074 977 896 828
(t/hour)

Mining Excavators
Job efficiency(%) 90% 83% 73% 65%

Truck
time
23(s) 3596 3305 3057 2844 3316 3048 2819 2623 2917 2680 2480 2307 2597 2387 2208 2054
100% 27.0 189.0 27(s) 3145 2920 2725 2555 2901 2693 2513 2356 2551 2369 2210 2072 2271 2109 1968 1845
31(s) 2795 2616 2458 2319 2578 2412 2267 2138 2267 2122 1994 1881 2019 1889 1775 1675
23(s) 3236 2974 2751 2560 2984 2743 2537 2361 2625 2412 2232 2076 2337 2148 1987 1849
90% 24.3 170.1 27(s) 2831 2628 2453 2299 2610 2424 2262 2120 2296 2132 1989 1865 2044 1898 1771 1661
31(s) 2515 2354 2212 2087 2320 2171 2040 1924 2040 1910 1795 1693 1817 1700 1598 1507
23(s) 2877 2644 2446 2275 2653 2438 2256 2098 2333 2144 1984 1846 2078 1909 1766 1643
80% 21.6 151.2 27(s) 2516 2336 2180 2044 2320 2154 2011 1885 2041 1895 1768 1658 1817 1687 1575 1476
31(s) 2236 2093 1967 1855 2062 1930 1814 1711 1814 1697 1595 1505 1615 1511 1420 1340
23(s) 2517 2313 2140 1991 2321 2133 1974 1836 2042 1876 1736 1615 1818 1671 1546 1438
70% 18.9 132.3 27(s) 2202 2044 1908 1788 2030 1885 1759 1649 1786 1658 1547 1450 1590 1476 1378 1292
31(s) 1956 1831 1721 1623 1804 1689 1587 1497 1587 1485 1396 1316 1413 1322 1243 1172
(t/hour)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
23(s) 3596 3305 3057 2844 3316 3048 2819 2623 2917 2680 2480 2307 2597 2387 2208 2054
100% 27.0 189.0 27(s) 3145 2920 2725 2555 2901 2693 2513 2356 2551 2369 2210 2072 2271 2109 1968 1845
31(s) 2795 2616 2458 2319 2578 2412 2267 2138 2267 2122 1994 1881 2019 1889 1775 1675
23(s) 3236 2974 2751 2560 2984 2743 2537 2361 2625 2412 2232 2076 2337 2148 1987 1849
90% 24.3 170.1 27(s) 2831 2628 2453 2299 2610 2424 2262 2120 2296 2132 1989 1865 2044 1898 1771 1661
31(s) 2515 2354 2212 2087 2320 2171 2040 1924 2040 1910 1795 1693 1817 1700 1598 1507
23(s) 2877 2644 2446 2275 2653 2438 2256 2098 2333 2144 1984 1846 2078 1909 1766 1643
80% 21.6 151.2 27(s) 2516 2336 2180 2044 2320 2154 2011 1885 2041 1895 1768 1658 1817 1687 1575 1476
31(s) 2236 2093 1967 1855 2062 1930 1814 1711 1814 1697 1595 1505 1615 1511 1420 1340
23(s) 2517 2313 2140 1991 2321 2133 1974 1836 2042 1876 1736 1615 1818 1671 1546 1438
70% 18.9 132.3 27(s) 2202 2044 1908 1788 2030 1885 1759 1649 1786 1658 1547 1450 1590 1476 1378 1292
31(s) 1956 1831 1721 1623 1804 1689 1587 1497 1587 1485 1396 1316 1413 1322 1243 1172
(t/hour)

Mining Excavators
Job efficiency(%) 90% 83% 73% 65%

Truck
time
23(s) 4926 4396 3969 3617 4543 4054 3660 3336 3996 3566 3219 2934 3558 3175 2866 2612
100% 37.8 189.0 27(s) 4352 3933 3587 3298 4014 3627 3308 3041 3530 3190 2910 2675 3143 2840 2591 2382
31(s) 3898 3558 3273 3030 3595 3281 3018 2794 3162 2886 2655 2458 2815 2570 2364 2188
23(s) 4434 3956 3572 3255 4089 3649 3294 3002 3596 3209 2897 2640 3202 2857 2580 2351
90% 34.0 170.1 27(s) 3917 3540 3229 2968 3612 3264 2977 2737 3177 2871 2619 2407 2829 2556 2332 2143
31(s) 3508 3202 2946 2727 3235 2953 2717 2515 2845 2597 2389 2212 2534 2313 2127 1969
23(s) 3941 3517 3175 2894 3635 3243 2928 2669 3197 2853 2575 2347 2846 2540 2293 2090
80% 30.2 151.2 27(s) 3482 3146 2870 2638 3211 2902 2647 2433 2824 2552 2328 2140 2515 2272 2073 1905
31(s) 3118 2847 2618 2424 2876 2625 2415 2235 2529 2309 2124 1966 2252 2056 1891 1751
23(s) 3449 3077 2778 2532 3180 2838 2562 2335 2797 2496 2253 2054 2491 2222 2006 1829
70% 26.5 132.3 27(s) 3047 2753 2511 2308 2810 2539 2316 2129 2471 2233 2037 1872 2200 1988 1814 1667
31(s) 2729 2491 2291 2121 2516 2297 2113 1956 2213 2020 1858 1720 1971 1799 1655 1532
(t/hour)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
23(s) 5161 4605 4158 3789 4760 4247 3834 3495 4186 3735 3372 3074 3727 3326 3003 2737
100% 39.6 198.0 27(s) 4559 4120 3758 3455 4205 3800 3466 3186 3698 3342 3048 2802 3293 2976 2714 2495
31(s) 4084 3728 3429 3174 3766 3438 3162 2927 3312 3023 2781 2575 2949 2692 2476 2293
23(s) 4645 4145 3742 3410 4284 3822 3451 3145 3768 3362 3035 2766 3355 2993 2702 2463
90% 35.6 178.2 27(s) 4104 3708 3382 3109 3784 3420 3119 2867 3328 3008 2743 2522 2964 2678 2443 2245
31(s) 3675 3355 3086 2857 3389 3094 2846 2635 2981 2721 2503 2317 2654 2423 2229 2063
23(s) 4129 3684 3326 3031 3808 3398 3067 2796 3349 2988 2698 2459 2982 2661 2402 2189
80% 31.7 158.4 27(s) 3648 3296 3007 2764 3364 3040 2773 2549 2959 2674 2439 2242 2634 2381 2171 1996
31(s) 3267 2982 2743 2539 3013 2750 2530 2342 2650 2419 2225 2060 2359 2154 1981 1834
23(s) 3613 3224 2910 2652 3332 2973 2684 2446 2930 2615 2361 2151 2609 2328 2102 1916
70% 27.7 138.6 27(s) 3192 2884 2631 2418 2943 2660 2426 2230 2589 2339 2134 1961 2305 2083 1900 1746
31(s) 2858 2609 2400 2222 2636 2406 2213 2049 2319 2116 1947 1802 2064 1885 1733 1605
(t/hour)

Mining Excavators
Job efficiency(%) 90% 83% 73% 65%

Truck
time
26(s) 6340 5797 5339 4949 5847 5346 4924 4564 5143 4702 4331 4014 4579 4187 3856 3574
100% 52.2 313.2 30(s) 5624 5192 4822 4501 5186 4788 4447 4151 4561 4211 3911 3651 4061 3750 3482 3251
34(s) 5052 4701 4396 4128 4659 4336 4054 3807 4098 3813 3565 3348 3649 3395 3175 2981
26(s) 5706 5217 4806 4454 5262 4812 4432 4108 4628 4232 3898 3613 4121 3768 3471 3217
90% 47.0 281.9 30(s) 5061 4673 4340 4051 4668 4309 4002 3736 4105 3790 3520 3286 3655 3375 3134 2926
34(s) 4547 4231 3956 3715 4193 3902 3649 3426 3688 3432 3209 3013 3284 3056 2857 2683
26(s) 5072 4638 4272 3959 4678 4277 3939 3651 4114 3762 3465 3211 3663 3349 3085 2859
80% 41.8 250.6 30(s) 4499 4154 3858 3601 4149 3831 3557 3321 3649 3369 3129 2921 3249 3000 2786 2601
34(s) 4042 3761 3517 3302 3728 3468 3243 3045 3278 3051 2852 2678 2919 2716 2540 2385
26(s) 4438 4058 3738 3464 4093 3742 3447 3195 3600 3291 3032 2810 3205 2931 2699 2502
70% 36.5 219.2 30(s) 3936 3634 3375 3151 3630 3352 3113 2906 3193 2948 2738 2556 2843 2625 2438 2276
34(s) 3537 3291 3077 2889 3262 3035 2838 2665 2869 2669 2496 2344 2554 2377 2222 2087
(t/hour)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
26(s) 6340 5797 5339 4949 5847 5346 4924 4564 5143 4702 4331 4014 4579 4187 3856 3574
100% 52.2 313.2 30(s) 5624 5192 4822 4501 5186 4788 4447 4151 4561 4211 3911 3651 4061 3750 3482 3251
34(s) 5052 4701 4396 4128 4659 4336 4054 3807 4098 3813 3565 3348 3649 3395 3175 2981
26(s) 5706 5217 4806 4454 5262 4812 4432 4108 4628 4232 3898 3613 4121 3768 3471 3217
90% 47.0 281.9 30(s) 5061 4673 4340 4051 4668 4309 4002 3736 4105 3790 3520 3286 3655 3375 3134 2926
34(s) 4547 4231 3956 3715 4193 3902 3649 3426 3688 3432 3209 3013 3284 3056 2857 2683
26(s) 5072 4638 4272 3959 4678 4277 3939 3651 4114 3762 3465 3211 3663 3349 3085 2859
80% 41.8 250.6 30(s) 4499 4154 3858 3601 4149 3831 3557 3321 3649 3369 3129 2921 3249 3000 2786 2601
34(s) 4042 3761 3517 3302 3728 3468 3243 3045 3278 3051 2852 2678 2919 2716 2540 2385
26(s) 4438 4058 3738 3464 4093 3742 3447 3195 3600 3291 3032 2810 3205 2931 2699 2502
70% 36.5 219.2 30(s) 3936 3634 3375 3151 3630 3352 3113 2906 3193 2948 2738 2556 2843 2625 2438 2276
34(s) 3537 3291 3077 2889 3262 3035 2838 2665 2869 2669 2496 2344 2554 2377 2222 2087
(t/hour)

Mining Excavators
Job efficiency(%) 90% 83% 73% 65%
Truck
time
28(s) 8096 7164 6424 5823 7467 6607 5925 5370 6567 5811 5211 4723 5847 5174 4640 4205
100% 72.0 288.0 32(s) 7310 6541 5919 5405 6741 6033 5459 4984 5929 5306 4801 4384 5279 4724 4275 3903
36(s) 6663 6018 5487 5043 6145 5550 5061 4650 5404 4881 4451 4090 4812 4346 3963 3642
28(s) 7287 6448 5782 5241 6720 5946 5332 4833 5910 5230 4690 4251 5263 4657 4176 3785
90% 64.8 259.2 32(s) 6579 5887 5327 4864 6067 5429 4913 4486 5336 4775 4321 3945 4751 4252 3847 3513
36(s) 5996 5416 4939 4538 5530 4995 4554 4185 4864 4393 4006 3681 4331 3912 3567 3278
28(s) 6477 5731 5139 4658 5973 5285 4740 4296 5254 4649 4169 3778 4678 4139 3712 3364
80% 57.6 230.4 32(s) 5848 5233 4735 4324 5393 4826 4367 3987 4743 4245 3841 3507 4224 3779 3420 3123
36(s) 5330 4815 4390 4034 4916 4440 4048 3720 4323 3905 3561 3272 3850 3477 3170 2913
28(s) 5668 5015 4497 4076 5227 4625 4147 3759 4597 4068 3648 3306 4093 3622 3248 2944
70% 50.4 201.6 32(s) 5117 4579 4143 3783 4719 4223 3821 3489 4150 3714 3361 3069 3696 3307 2992 2732
36(s) 4664 4213 3841 3530 4301 3885 3542 3255 3783 3417 3116 2863 3368 3043 2774 2549
(t/hour)
Job efficiency(%) 90% 83% 73% 65%

Truck
time
28(s) 8704 7701 6906 6260 8027 7102 6369 5773 7060 6247 5602 5077 6286 5562 4988 4521
100% 77.4 309.6 32(s) 7858 7032 6363 5810 7247 6485 5868 5358 6374 5704 5161 4713 5675 5079 4595 4196
36(s) 7162 6470 5899 5421 6605 5966 5440 4999 5810 5248 4785 4397 5173 4672 4260 3915
28(s) 7833 6931 6215 5634 7224 6392 5732 5195 6354 5622 5041 4570 5657 5006 4489 4069
90% 69.7 278.6 32(s) 7072 6329 5727 5229 6522 5836 5281 4822 5737 5133 4645 4241 5108 4571 4136 3777
36(s) 6446 5823 5309 4879 5945 5370 4896 4499 5229 4723 4306 3957 4656 4205 3834 3523
28(s) 6963 6161 5525 5008 6421 5682 5095 4618 5648 4997 4481 4062 5029 4450 3990 3617
80% 61.9 247.7 32(s) 6287 5626 5090 4648 5798 5188 4694 4287 5099 4563 4129 3770 4540 4063 3676 3357
36(s) 5730 5176 4719 4337 5284 4773 4352 3999 4648 4198 3828 3517 4138 3738 3408 3132
28(s) 6093 5391 4834 4382 5619 4972 4458 4041 4942 4373 3921 3554 4400 3893 3491 3165
70% 54.2 216.7 32(s) 5501 4922 4454 4067 5073 4539 4108 3751 4462 3993 3613 3299 3973 3555 3217 2937
36(s) 5014 4529 4129 3795 4624 4176 3808 3499 4067 3673 3349 3078 3621 3271 2982 2740
(t/hour)

Rigid Dump Truck Contents
Rigid Dump
Truck
Features
Truck Specification
Tire Specification
Dimensions
Body selection
Use of Performance Curves
Performance Curves：
EH3500AC-3
EH4000AC-3
EH5000AC-3

Rigid Dump Truck Features
Features
Refined engineering and advanced Hitachi AC Drive system technology have created hauling
capability well recognized in the surface mining industry.
Our dump trucks continue to prove itself as an exceedingly capable and reliable solution to mine
applications worldwide.
AC Drive Advantage
Hitachi AC drive technology provides superior truck performance
with higher top speeds, better grade ability and stronger electric
braking. Hitachi inverter modules provide high rigid truck
controllability and efficiency. The Hitachi AC wheel motors do
not have commutators and brushes, which improves truck
performance by providing reduced maintenance costs, higher
truck availability and higher travel speeds. These advantages
result in more productivity and lower costs per tonne. Hitachi AC
drive systems also power electric train locomotives world wide.
・Hitachi Drive Control System

1. Slip / slide control system 2. Pitch control system 3. Side Skid control system
If the system senses slipping If the system senses pitching when If the system senses oversteer or
or locking of rear wheels when traveling on bumpy roads or understeer from the newly
traveling on slippery or frozen stopping abruptly, it adjusts the equipped sensors, it adjusts the
roads, it adjusts the torques of the torques of the wheel motors torques of the wheel motors
wheel motors accordingly, accordingly to reduce pitching of the accordingly to control the side
bringing the truck more stable truck, resulting in better operating skidding. This brings the truck
traveling. comfort and fewer load spillage. smoother movements and more
stable traveling and steering.
・AC Drive Control

Superior Electric Braking enables the driver to stop the truck using the electric brake pedal only with the exception
of emergencies, because the AC drive control system applies the service brakes automatically just before the
stopping, resulting in easy machine operation and longer time between service brake maintenance intervals.
. Auto Cruise Control keeps vehicle speed constant within the set range by limiting the minimum vehicle speed
Auto Retarding Control keeps vehicle downhill speed constant within the set range by limiting the maximum
vehicle speed.
・The AC Drive Wheel Motors
The Hitachi Double Path Tandem Planetary Design
provides high efficiency. Better component and
lubricant life is the result of holding the 1st carrier
stationary and constantly cycling the lubricant through a
cooler and filter.

Ease of Operation ・HI-TECH ROPS/FOPS Cab

・Superior Suspension The HI-TECH ROPS/FOPS cab has been equipped
The Hitachi trailing arm suspension system delivers with a Hitachi controller and a large centrally mounted,
excellent maneuverability, even at higher speeds. The color Liquid Crystal Display (LCD) as used in Hitachi
trailing arm layout offers greater ease of servicing large sized excavators. Double wall construction of 11
while improving truck performance compared to gauge inner and outer steel panels produces a more
suspended king-pin designs. The pivot mounting of structurally sound cab.
the trailing arm design allows only axial input to the A three-point rubber isolation-mount arrangement
strut and allows wheel movement to the vertical plane minimizes vibration to the operator compartment.
only.
The trailing arm suspension design allows the front
struts to be removed and installed without removing
the front brakes or tires. This means fewer tools and
less labor time are required, resulting in less downtime
and higher productivity.
・THE FAST FILLING SYSTEM

The fast filling system, provided standard on the left
side of the radiator, allows direct access at ground
level for fast feeding of coolant, grease, hydraulic oil
and engine oil. (Couplers are optional.)
1 Hydraulic oil 4 Grease
2 Coolant 1 5 Engine oil
3 Coolant 2

ConSite ・Alarm Report

ConSite is a consolidated solution service that links If the machine’s alarm goes off and the problem
you to your machine on the construction site. requires urgent attention to prevent downtime, an
emergency alarm report will be sent to the registered
e-mail addresses.
Key items included in the report

- Model name / S/N
- Hour meter
- Alarm code / name
- Recommended action
- Position
Benefits:
1. Information of an alarm requiring urgent attention
can be shared by the operator and owner, so that
the necessary measures can be taken.
2. Alarm information can be shared with your dealer

as well, to enable smoother coordination and
reduce your machine’s downtime.
・Monthly Report
A detailed report of the operational status for each
machine will be sent to the registered e-mail addresses
every month.
Key items included in the report

- Truck payload summary
- Truck cycle summary
- AC drive components temperature Payload analysis Idling time AC Drive components
- Fuel consumption & operation efficiency temperature
- Major components oil temperature
- Various advice & components
Benefits:
1. Monthly operational information helps you to
analyze the operational efficiency of your machine
and improve overall machine-operation status.
2. Each machine’s operational information can be

shared with Hitachi authorized dealers, enabling a
stable operation for your machine.
Warning:
∙ The data report service is available on machines equipped with the communication terminal.
∙ Contact Hitachi authorized dealers for the details of Data Report Service and machine models that are supported.
∙ The communication ability may depends on the situation of the worksite. Please confirm if your machine is currently communicating before having this service.
Under no circumstances shall Hitachi Construction Machinery Co., Ltd. and or Subsidiaries and its Dealers be held responsible or liable for any communication line failure, interruption,
delay in operation or transmission or any other cause of action.

Simplified Maintenance
・Low Maintenance Air filters with evacuator
valves
Four Air filters with
evacuator valves bring
easy maintenance.
・Ground Level Battery Box and Relay Box

The battery box door
with gas cylinders
allows the operator safe
and easy maintenance.
・Collapsible Step for Maintenance inside Rear

Axle
The collapsible step and
flat service stage inside
rear axle bring higher
serviceability and safety
Long Frame Life

A fabricated box section and rectangular frame rail
construction provides superior resistance to bending
and torsional loads. The top and bottom flanges
eliminate cross member tie-in joints and provide a
larger exposed center area for access to major
components.
Tough Body
The Hitachi horizontal stiffener design minimizes
stress concentrations by dissipating load shocks over
the entire body length. Efficiently spaced stiffeners
provide additional protection by minimizing distances
between unsupported areas.

Aerial Angle (option)

The dump truck Aerial Angle system is designed to Six different views including a bird-eye view of the
assist in preventing collisions with obstacles. Aerial machine are available to provide greater convenience.
Angle has been newly implemented as an advancement
and addition to the previous Peripheral Vision system.
Obstacles within the front and surrounding areas of the
machine are detected with warnings being activated by
the system.
2. Forward Mode (While Traveling)

Obstacles to the front and their distance from the
machine are detected by a millimeter-wave radar.
When another machine in front comes too close, the
operator is notified by a buzzer sound as well as a
warning sign that appears on the screen. There are two
types of warnings that appear depending on the
position of the machine in relation with the obstacle.
・Two Modes The system adjusts the warning activation distance
The dump truck Aerial Angle has two modes. depending on the current gross laden weight of the
Stationary Mode detects any obstacles within the vehicle.
vicinity when the machine is stationary during dumping,
loading, or when it is parked. Forward Mode warns the
operator of the possibility of collisions during travel.
1. Stationary Mode (When Stationary)

Markers are placed on obstacles that appear on the
screen. Red markers indicate any obstacles in the
immediate vicinity of the machine, whereas yellow
markers indicate obstacles further away. This system
enables the operator to check for outside obstacles on-
screen without having to leave machine.
Warning:
∙ When driving the vehicle, be sure to perform a direct visual check all around the vehicle with your eyes.
∙ This System is an auxiliary system to assist the operator in driving, and its use should never substitute the use of common sense safety measures, direct visual observation, and professional judgment. Never
solely rely upon this System to operate the vehicle.
∙ Failure to understand or correctly interpret the images displayed and the alert features of this System may lead to accidents involving serious personal injury or property damage. Operate this System properly
by thoroughly reading Aerial Angle Operator’s Manual and getting a good understanding of this System before using it.
∙ The images projected by this System from above are processed, synthesized camera images; therefore, the surroundings may not continuously appear on the monitor, objects may appear upside down or may
not appear, or otherwise appear differently from visual observation.
∙ Depending on the surrounding environment or the subject of detection, the detection function of this System may not work properly.
∙ The brightness of the surroundings, weather, road surface conditions, and shape and material of objects detected may cause the alarm of this System to become non-operational or malfunction.
∙ Do not operate the monitor when you are driving the vehicle.
Note: There are countries the system cannot be used in due to local laws and regulations etc.

Trolley System (option)

Power supply from an overhead line provides powerful and
relentless travel on slopes. Switch between the on-board power
source and an external power line smoothly and easily.
Comfortable, stress-free operation.
・Difference of Energy Flow between Trolley and Diesel Truck

Trolley Mode Diesel Mode
While on electric power, the engine idles at Engine runs at max power supplying drive to
1200 rpm directing power only to the two-traction motors, all auxiliaries, and the
auxiliaries and the hydraulic pump – even when hydraulic pump when being driven uphill under
the machine is being driven uphill under load. load.
・Benefits of the Trolley System

Higher speeds during loaded hill climbing - faster
than in Diesel mode (Travels at approx. twice the Shorter cycle times, higher productivity
speed of a large-motor vehicle in Diesel mode)
Lower diesel fuel consumption

High-efficiency trolley travel thanks to the high- Lower running costs, greater economy
voltage DC (2400-2600 V) system
Lower running costs and greater economy and
Less engine stress leads to longer engine life
productivity due to less frequent engine overhauls
Lower exhaust emissions and lower engine noise Environmental Friendliness
Development of pantographs specifically for dump Reduces risk of damage due to vibrations and
trucks uses carbon-metallic contact strips
Body raising prohibited during trolley travel Safer operation (electric shock prevention)
Low engine RPM during trolley travel (1200 rpm) Reduces noise inside cab
・TLA (Trolley Line Assist : Optional)

Operators can check the overhead trolley wire and pantograph from the Aerial Angle monitor.
1. Positioning Assist 2. Trolley Line Assist
Before entering the trolley During trolley mode, this
section, this function assists function assists the operator
the operator in aligning the to drive within the contact
truck with the trolley line. range of the pantograph and
trolley line.
These functions make driving the trolley trucks easier.
Rigid Dump Truck Specifications
Model EH3500AC-3 EH4000AC-3 EH5000AC-3

Target GMOW※1 322000Kg 384000Kg 500000Kg
Nominal Payload※2 181tonnes(200tons) 221tonnes(243.6tons) 296tonnes(326tons)
Net Machine Weight※3 1410000kg 163000Kg 204000Kg
Chassis with Hoist &Body
118000Kg 137000Kg 174000Kg
parts
Body excluding body parts 23000Kg 26000Kg 30000Kg
Body capacity(SAE 2:1) 117m3 154m3 202m3
Weight distribution(Empty)
Front 48% 48% 48%
Rear 52% 52% 52%
Weight distribution(Loaded)
Front 33% 33% 33%
Rear 67% 67% 67%
Engine (standard)
Engine Cummins QSKTA50-CE Cummins QSKTA60-CE Cummins QSKTTA60-CE
4 Cycle Diesel w/MCR fuel 4 Cycle Diesel w/MCR fuel 4 Cycle Diesel w/MCR fuel
Type
system system system
Emission Certification U.S.EPA Tier 2 U.S.EPA Tier 2 U.S.EPA Tier 2
Number of Cylinders 16 16 16
Bore 159mm 159mm 159mm
Stroke 159mm 190mm 190mm
Displacement 50.3L 60L 60L
Rated power @ 1900min-1
1491kW(2000HP) 1864kW(2500HP) 2125kW(2850HP)
(rpm) ISO 14396
Maximum Torque @1500min-
1 7871N.m (803kgf.m) 9839N.m (1004kgf.m) 11218 N.m (1144kgf.m)
(rpm)
Engine (optional)
Engine MTU 12V4000C21 MTU 16V4000C21 MTU 16V4000C31
Type 4 Cycle Diesel w/DDEC 4 Cycle Diesel w/DDEC 4 Cycle Diesel w/DDEC
Emission Certification - - -
Number of Cylinders 12 16 16
Bore 165mm 165mm 165mm
Stroke 190mm 190mm 190mm
Displacement 48.8L 65L 65L
Rated power @ 1900min-1
1510kW(2025HP) 1864kW(2500HP) 2125kW(2850HP)
(rpm) ISO 14396
Maximum Torque
8199N.m (836kgf.m) 10148N.m (1035kgf.m) 11136N.m (1136kgf.m) ※4
@ 1500min-1 (rpm)
Standard Tires 37.00R57 46/90R57 53/80R63
Turning Diameter ISO 7457 29.3m 30.2m 29.9m
Fuel tank (Standard)※5 2010L 2680L 2900L
Fuel tank (Option)※5 3640L 4570L 4950L
Maximum speed (Continuous) 56km/h 56km/h 56km/h
Sound Level in cab ISO 6396 LpA 75dB(A) LpA 76dB(A) LpA 73dB(A)
Auto air conditioner
HFC-134a HFC-134a HFC-134a
Refrigerant type
GWP※6 1430 1430 1430
F gas Amount 1.0 kg 0.9 kg 1.0 kg
CO2 equivalent 1.43 ton 1.29 ton 1.43 ton
※1：GMOW means “Gross Machine Operating Weight” .GMOW=Net Machine Weight + Nominal payload.
※2：Nominal Payload: The Nominal Payload specification is calculated using the Hitachi Loading Policy. Specific job site requirements may result in
an adjustment to the Nominal Payload weight. Consult your Hitachi dealer for a truck configuration which will match your haulage application.
※3：Net Machine Weight: The Net Machine Weight specification includes standard equipment, operator and 100 % fuel.
※4：This is Maximum Torque @ 1800min-1 (rpm).
※5：Standard fuel tank recommended for only day time operation. Optional fuel tank recommended for 24 hours operation.
The option fuel tank is installed into the machines, the payload will be decreased by only the part.
※6：GWP means “Global Warming Potential”.
Rigid Dump Truck Dimensions
Overall Dimensions chart

Front canopy height 7000mm 7310mm 7520mm
Wheelbase 5620mm 6050mm 6470mm
Overall length 13560mm 14390mm 15490mm
Loading Height (Base Body) 5740mm 6130mm 6750mm
Height at Full Dump 13080mm 13870mm 14500mm
Body Length 8500mm 9160mm 9790mm
Overall Width 9130mm 9330mm 9600mm
Front Tire Tread 5400mm 6010mm 6370mm
Dimensions
EH3500AC-3

Rigid Dump Truck Dimensions
EH4000AC-3
EH5000AC-3

Rigid Dump Truck Tire Specifications
Tire Specifications
Tire manufacturers offer tires having a range of capabilities suitable for a variety of applications. For high
performance hauling it is important to consult with the tire manufacturer to choose a tire that is best matched to truck
TGMOW, travel speed and customer specific jobsite conditions. Jobsite condition severity, may result in a reduced
truck payload and travel speed recommendation.
Standard Optional
Model
Tire size Rim width Tire size Rim width
EH3500AC-3 37.00R57 29inch 40.00R57 29inch
EH4000AC-3 46/90R57 29inch 40.00R57 29inch
EH5000AC-3 53/80R63 36inch 53/80R63 38inch

Rigid Dump Truck Body selection
Body selection
An extended canopy protects service deck area. High tensile strength 400 BHN abrasion resistant alloy steel is used
in thicknesses indicated below:
Plate Thickness(Standard Body): mm mm mm
Floor 16 16 16
Front 9 9 9
Sides 9 9 9
Canopy 6 6 6
Corners 12 12 12
Optional Body Liners
Floor 12 12 12
Front 6 6 6
Sides 6 6 6
Canopy drop edge 6 6 6
Corners 12 12 12
※Special plate thicknesses and partial plates are available.
High strength 690 N/mm2 (100 000 psi) alloy steel is also used for the Canopy side members and floor stiffeners.
The body is rubber cushioned on the frame.
Tough Body Structure

Designed by Hitachi for long lasting strength and productivity. Hitachi offers customized solutions to match specific
load and haul applications.
Optional bodies and parts are engineered on request.
Standard Body Standard Body
The Hitachi standard body is designed to accommodate the needs of
popular mid-range material densities and the most popular loading
machines. Various options, such as liners, spill guard, extended canopy
are available.
Coal Body (Optional) Coal Body

The Hitachi coal body has been designed for low material density,
small fragmented, low abrasive material. This coal body offers
excellent material shedding, low empty weight and large capacity.
Iron Ore Body (Optional)

Iron Ore Body
The Hitachi iron ore body has been designed for use in rugged iron ore
mining applications. The body has been designed for high density
material and optimized loading and dumping.
Customized Body (Optional)

Upon request and approval, Hitachi will design bodies to suit special mining applications.
Exhaust Gas Flow

Heated Body (Optional Feature)
Heated Body is an optionally available feature for the STD, Coal, Iron
Ore and other customized Hitachi AC-3 Trucks Bodies. The heating
system uses exhaust gas to warm the body as shown in the RH. Use of
the heated body decreases the amount of carry backs that results in
greater productivity.
Rigid Dump Truck Use of performance curve
Definition of performance curve

Performance curve is consisted by two curves. The explanation of each curve is following.
•Traction curve
The maximum-speed that the machine can climb a slope in certain vehicle gross weight and grade.
•Electric braking performance curve
The maximum-speed that the machine can be controlled only using electric brake in a certain vehicle gross
weight and grade.
Performance curve described on these graphs are calculated based on theories. The Data may subject to change due
to various factors such as haul road conditions, altitude, climate, etc. and there can be a difference between the actual
data even if the Machine was operated under the same condition.
Use of performance curve

※Charts based on 0% rolling resistance. ③From intersection, read horizontally right or left to
①Find the effective grade on diagonal lines of intersect the curve.
Traction or Electric braking curve. (In this case,
Effective grade=5%)
The definition of Effective grade
(Traction curve: Effective grade = Grade % + Rolling
resistance %)
(Electric braking performance curve: Effective grade=
Grade % - Rolling resistance %)
④Read down for machine speed.
②Follow the diagonal line downward and intersect the

NMW or GMOW weight line.（In this case,
Operating weight =TGMOW)
In this case, 25km/h is indicated as the truck travel

speed.

Rigid Dump Truck Performance Curve
・EH3500AC‐3 with 37.00R57 tire
Traction curve
Electric braking performance curve

・EH4000AC‐3 with 46/90R57 tire
Traction curve

・EH5000AC‐3 with 53/80R63 tire
Traction curve

End of document
Mining Performance handbook

Hitachi Mining Performance Handbook

Uploaded by

Copyright:

Available Formats

Hitachi Mining Performance Handbook

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hitachi Mining Performance Handbook

Uploaded by

Copyright:

Available Formats

Publication：December 25, 2019

Technical Marketing Support Dept.

Mining Performance handbook 1/89

・Situation of using this handbook

・ Reference time of the Data

Technical Marketing Support Dept.

Mining Performance handbook 2/89

Diesel Drive AC Dump Truck

Mining Performance handbook 3/89

Mining Performance handbook 4/89

Mining Performance handbook 5 /89

・Electric Joystick Levers—

・Air Suspension Seat with Auto Operator Weight

・Adjustable Sliding Cockpit—

・Constant-Cab-Comfort Air Conditioner—

Mining Performance handbook 6/89

・Easy Access and Maintenance—

・Auto Lubrication System—

・Easy-to-Replace Grease Drum Can—Designed to

・Convenient Centralized Filter System—

Mining Performance handbook 7/89

・MAIN PUMP ELECTRIC REGULATORS designed for PRODUCTIVITY

・RADIATOR FAN MOTOR (EX1200-7)

Mining Performance handbook 8/89

Mining Performance handbook 9/89

Mining Performance handbook 10/89

Aerial Angle (option)

・Locations of the Cameras & Viewing Angles

Mining Performance handbook 11/89

(1). Struck capacity (A)

(2). Heaped capacity (A + B)

ISO: International Organization for Standardization

Note: This information may be subject to change without prior notice.

Mining Performance handbook 12 /89

Model EX1200-6 EX1200-7 EX1900-6

Mining Performance handbook 13/89

Model EX2600-6 EX2600-7

Mining Performance handbook 14/89

Model EX3600-6 EX3600-7

Mining Performance handbook 15/89

Model EX5600-6 EX5600-7

Mining Performance handbook 16/89

Model EX8000-6 EX8000-7

Mining Performance handbook 17/89

Model EX1900E-6 EX2600E-6 EX3600E-6

Mining Performance handbook 18/89

Model EX5600E-6 EX8000E-6

Mining Performance handbook 19/89

Model EX1200-6 EX1200-7 EX1900-6

Mining Performance handbook 20/89

Model EX2600-6 EX2600-7

Mining Performance handbook 21/89

Model EX3600-6 EX3600-7

Mining Performance handbook 22/89

Model EX5600-6 EX5600-7

Mining Performance handbook 23/89

Model EX8000-6 EX8000-7

*: U.S.EPA Tier 4 Final