Inspection of Materials Delivered To Site

Inspection of materials delivered to site
Date: 08 MAR.2023
Request no.: MIR-CSCEC-12-D01-ME-HD-0723-00
Project no. & title: E18066-0200S - The Central Business District of the New Administrative Capital of Egypt
Employer: Engineer: Contractor
1. Material / equipment
Description : Fabricated Galvanized Steel Duct (APRTMENT LINER & MISSING PARTS-3F-FCU-LOW)
Materials submittal ref. no. : MAT-CSCEC-12-ME-HD-0041-00 Date : 16/08/2021
Bill of quantities ref. no. : 233113-METAL DUCT
Quantity : Fabricated Galvanized Steel : AS PER ATTACHED DELIVERY NOTE ( 364 KG)
2. Manufacturer's details
Manufacturer : CSCEC
Model no.: Serial no. :
Country of origin: Egypt
Date of ARRIVAL on Site : 7/3/2023
STORAGE Location : DO1
Submitted by : LI JIAN MING Signature : LI JIAN MING
3. Inspection report
Yes/No Initials
Physical damage ? Yes No
Details given above correct ? Yes No
Conform with approved submission ? Yes No
Accessories/ spare parts included ? Yes No
Contractor shall follow manufacturer and SMACNA
Details : recommendations regarding the installation procedures.
- storing and handling shall be as supplier recommendation and
Remarks:
specs any damaging due to bad storing is sole contractor
responsibility to change without extra cost or time
M.Fathalla -Reda elsayed - 11/3/2023
4.Engineer's Representative comments
The above material has been inspected on site and found at time of inspection to be :
Satisfactory Unsatisfactory
for incorporation in the permanent works.
Signature Hassanein Ali Date : 11-03-2023

Above inspection shall not relieve Contractor of his responsibilities to incorporate in the Works only such materials that are in
conformity with the Contract.
S-PRC-SS-02(F36) Rev 1
Transmittal Of Documents
Date: 13 JUN. 2021
Request no: PRQ-CSCEC-12-D01-ME-HD-0001-02
Project No. & Title:E18066-0200S - The Central Business District of the New Administrative Capital of Egypt
Employer: Engineer: Contractor:
1. Document type
Material samples Catalogues Tests Technical sheets

Manufacturer certificates Schedules Other
2. Submittal details
Contract doc. Ref. &
Item no. Description of items submitted/ quantity Ref.
compliances
PRE-QULIFICATION DOCUMENTS FOR METAL DUCT
1
FABRICATION WORKSHOP
These are transmitted for:

Your information Approval Review & comment Other
Submitted by: AHMED ABOELFOTOUH Signature: AHMED ABOELFOTOUH
3. Engineeer's Representative comments:
Approved
HSE comments: The COSHH assessment for the
chemicals substances should be attached.
Approved as noted
CODE: Approved as noted
Mechanical: Refer to comments on the attached file.
Revise & resubmit

A.B Reda El sayed Tamer El beltagy 14/6/2021
Rejected
Others
Signature: M.N Date :

14-06-2021
Approval shall not relieve Contractor of his liabilities under the Contract or constitute authorization of any change to Contract Documents.
S-PRC-SS-02 (F43) Rev 2

Submittal For Approval Of Materials
Date: 16 AUG.2021
Request no: MAT-CSCEC-12-ME-HD-0041-00
Project No. & Title: E18066-0200S - The Central Business District of the New Administrative Capital of Egypt
Employer: Engineer: Contractor:
1. Material description (one item only on this form) :

Metal Duct Raw Material (without sample)
Area of application : Tower-D01
Drawing ref. : B.O.Q. ref. no.: 233113-METAL DUCT
Specification Ref. : 233113-METAL DUCT Standards: ASTM A 653/A653M, Z275(G90)

Attach all relevant technical literature marked to identify relevant description, current Test Certificates, samples as appropriate.
2. Manufacturer / supplier:
Company Name : Kandil(Galva&Kama)Coating
Address : Obour City - Industrial Zone Area # (5,6,9,8B) - Block 13035 Postal Code Cairo- Egypt
Local agent : Kandil(Galva&Kama)Coating
3. Delivery :
Country of origin :
Availability Egypt
Locally Manufactured Overseas
Delivery : Ex-works/ total duration [ ] [ ]

Estimated time of arrival on site [ ]
Program : Date material required on site [ ]

Latest date for order [ ]
We certify that the above submitted items have been reviewed in detail and are correct and in strict conformity with the contract drawings and specifications
except as otherwise stated; also that the material sources indicated above have been reviewed in detail and that they will supply the submitted items in conformity
with the above and deliver same timely.
Submitted by : LIU JUNBO Signature: LIU JUNBO
4. Engineer's Representative comments: Approved

Approved as noted
Previous comments in material submittal reference (MAT-CSCEC-00-ME- Revise and
HD-0111-00) , still valid until covering all comments resubmit
Rejected
Sample required
R-Elsayed 19/8/2021 Tests required
Additional
information
required
Hassanein Ali 19-08-2021

Manufacturer's
Signature: Date: guarantee
required
Approval shall not relieve Contractor of his liabilities under the Contract or constitute authorization of any change to Contract Documents.
AM-1
S-PRC-SS-02(F26) Rev 2
Project no. & title: E18066-0200S - The Central Business District of the New Administrative Capital of Egypt
Employer Consultant Contractor
Delivered Material Quantities "MIR"

Galvanized Duct
PK Tower
Quantity (Kg)
Country of Total Quantity Area of
No. MIR Ref. Date of MIR Status Approved Material Submittal Ref. Manufacturer Supplier
Origin Thickness - 0.6mm Thickness - 0.8mm Thickness - 1.0mm Thickness - 1.25mm Thickness - 1.5mm Thickness - 1.6mm (Kg) Application
Weight Weight Weight Weight Weight Weight
Coil No. Coil No. Coil No. Coil No. Coil No. Coil No.
Kg Kg Kg Kg Kg Kg
Kandil (Galva&Cama)
428 MIR-CSCEC-12-D01-ME-HD-0696-00 7/Feb/23 PRQ-CSCEC-12-D01-ME-HD-0001-05 CSCEC
coating
EGYPT 709 359609E 810 388103B 1519
Kandil (Galva&Cama)
coating
EGYPT 64 359609D 65 388103A 129
Kandil (Galva&Cama)
coating
EGYPT 68 359609D 54 388103A 122
Kandil (Galva&Cama)
coating
EGYPT 73 359609D 53 388103A 126
Kandil (Galva&Cama)
coating
EGYPT 101 359609D 109 388103A 210
Kandil (Galva&Cama)
coating
EGYPT 26 362357E 28 388104C 54
Kandil (Galva&Cama)
coating
EGYPT 591 362357E 739 388104C 1330
Kandil (Galva&Cama)
coating
EGYPT 67 362357E 39 388104C 106
Kandil (Galva&Cama)
coating
EGYPT 8020 395473AA 8020
Kandil (Galva&Cama)
coating
EGYPT 610 362356E 610
Kandil (Galva&Cama)
coating
EGYPT 315 362356E 497 388104C 812
Kandil (Galva&Cama)
coating
EGYPT 615 388301B 793 388104C 1408
Kandil (Galva&Cama)
440 MIR-CSCEC-12-D01-ME-HD-0721-00 4/Mar/23 PRQ-CSCEC-12-D01-ME-HD-0001-05 CSCEC
coating
EGYPT 658 362356E 787 388104C 1445
Kandil (Galva&Cama)
coating
EGYPT 655 388310B 722 388104C 1377
Kandil (Galva&Cama)
coating
EGYPT 191 388102A 173 388105C 364
Kandil (Galva&Cama)
coating
EGYPT 656 388301B 706 388104C 1362
Kandil (Galva&Cama)
coating
EGYPT 163 388302A 110 388105C 273
Kandil (Galva&Cama)
445 PRQ-CSCEC-12-D01-ME-HD-0001-05 CSCEC
coating
EGYPT 0
Kandil (Galva&Cama)
coating
EGYPT 0
Kandil (Galva&Cama)
coating
EGYPT 0
Kandil (Galva&Cama)
coating
EGYPT 0
Kandil (Galva&Cama)
coating
EGYPT 0
Kandil (Galva&Cama)
coating
EGYPT 0
Total 104882 120200.5 7245.7 20886.8 10048 17058 280321
Production schedule of air ducts
Project: CBD APRTMENT LINER & MISSING PARTS-3F-FCU-LOW
Package/Bdg/Lev: P2/D01/L-3
Draw No:SHD-CSCEC-12-D01-ME-HD-04-GL-00-1071-0000-00 Static pressure：LOW ; 3/7/2023
Length(m 2 GALVANIZATI
No. Type Thick(m Specification Connectio Coil NO. Quantity Area(m ) Density(k Weight(kg Tag No.
m) 2 ON
m) n Type g/m ) )
1 Straight 0.6 740*235 TDF Liner 388102A 500 1 0.98 5.64 6.05 FCU-D01-08 277
2 Shoe 0.6 300*300/300*300 TDF 388102A 170 1 0.20 5.64 1.27 FCU-D01-08 278
3 Reducer 0.6 755*200/500*200 TDF Liner 388102A 480 1 0.92 5.64 5.69 FCU-D01-08 275
5 Shoe 0.6 300*300/300*300 TDF 388102A 150 1 0.18 5.64 1.12 FCU-D01-08 275
7 Shoe 0.6 350*150/350*150 TDF 388102A 585 1 0.59 5.64 3.63 FCU-D01-01 275
8 Offset 0.6 350*150 TDF 388102A 710 1 0.71 5.64 4.40 FCU-D01-01 275
9 Reducer 0.8 865*200/400*200 TDF Liner 388105C 700 1 1.49 6.86 11.25 FCU-D01-01 276
10 Offset 0.6 400*200 TDF 388102A 480 1 0.58 5.64 3.57 FCU-D01-01 278
12 Elbow 0.6 500*250 TDF Liner 388102A 950 1 1.43 5.64 8.84 FCU-D01-03 275
14 Shoe 0.6 450*200/450*200 TDF 388102A 420 1 0.55 5.64 3.39 FCU-D01-03 275
15 Offset 0.6 450*200 TDF 388102A 750 1 0.98 5.64 6.05 FCU-D01-03 275
17 Shoe 0.6 350*150/350*150 TDF 388102A 475 1 0.48 5.64 2.95 FCU-D01-01 275
18 Elbow 0.6 350*150 TDF 388102A 960 1 0.96 5.64 5.96 FCU-D01-01 276
19 Offset 0.6 350*150 TDF 388102A 350 1 0.35 5.64 2.17 FCU-D01-01 275
21 Offset 0.6 450*150 TDF Liner 388102A 770 1 0.92 5.64 5.73 FCU-D01-01 277
23 Shoe 0.6 300*300/300*300 TDF 388102A 170 1 0.20 5.64 1.27 FCU-D01-08 276
26 Shoe 0.6 300*300/300*300 TDF 388102A 150 1 0.18 5.64 1.12 FCU-D01-08 277
28 Shoe 0.6 350*150/350*150 TDF 388102A 475 1 0.48 5.64 2.95 FCU-D01-01 276
29 Offset 0.6 300*150 TDF 388102A 360 1 0.32 5.64 2.01 FCU-D01-01 276
30 Elbow 0.6 300*150 TDF 388102A 910 1 0.82 5.64 5.08 FCU-D01-01 277
36 Shoe 0.6 350*150/350*150 TDF 388102A 615 1 0.62 5.64 3.82 FCU-D01-01 277
37 Offset 0.6 350*150 TDF 388102A 730 1 0.73 5.64 4.53 FCU-D01-01 275
39 Shoe 0.6 450*200/450*200 TDF 388102A 420 1 0.55 5.64 3.39 FCU-D01-03 278
40 Offset 0.6 450*200 TDF 388102A 540 1 0.70 5.64 4.36 FCU-D01-03 277
42 Elbow 0.6 500*200 TDF Liner 388102A 800 1 1.12 5.64 6.95 FCU-D01-03 278
Project No. P2&P6 Date 3/7/2023
Computed by Checked by
Subject Total Air Conditioning System

Galvanised Steel Rectangular Low Pressure Fresh Air Duct
Results
Gross Weight Duct Area Insulation Area

(kg) m2 m2
364 37 41
Weight Area
Strait Duct 164 18
Elbow 21 3
Reducer 126 9
Take Off 53 7
Plenum 0
Ring 0 0
End Cap 0 0
UYR\SZ[
`abacdefÿhiÿjhkcablmÿndaoadapc
qÿnersbÿtpupohvwpbd
xpyÿnersbÿzhwwkbadapc
{kd|headf
PQRSÿUVSWXYZQSZ[
#$! #$! #$!
&$' &$" &!$
´µV¶ÿ·~QRS¸UVSWXYZQSZ[
¹º»¼½¾º¿ÀÁÂÃ
jÿz xtÿz xÄnzÅ xÿÆÅ̀Åtÿz `{xÇÿ ÈÿzjÅx{
#$! z xÄnzÅ xÿÅÉjjÿxÉÅxÄÅxÉÿtÅÊÅÅ x
!" UVSZ~QZV~[
23456ÿ839ÿÿ
9ÿ63ÿÿÿÿ
099ÿ
}~V\ZÿQ\[
zpbdesoÿkcabpccÿtacdead
iÿd|p
ÿxpyÿ{wabacdesdaupÿ zsvadso

ztÿ{ÿÿj{ÿ
Ë\Ìÿ}YQS[

01 x Äj

´µ\\ZÿUXZW[

8HI
00KILMHM8

23456ÿ839ÿÿ 23456ÿ839ÿÿ 23456ÿ839ÿÿ 23456ÿ839ÿÿ IJI8
9ÿ63ÿÿ ÿÿ 9ÿ63ÿÿ ÿÿ 9ÿ63ÿÿÿÿ 9ÿ63ÿÿ ÿÿ
099ÿ 099ÿ 099ÿ 099ÿ
ùúûüýþÿ0120ÿ233þûûÿ455ýÿ6532075úÿ7ûÿ
#$!
ûü70286þÿ05ÿûþý9þÿ760þýÿÿ9269þûÿý5 þý6 %$
&'(()*+,ÿ.ÿ/)*)012ÿÿ.ÿ
0 ÿÿÿÿÿ 3.45601+5'*ÿ1*7ÿ,)5,(58ÿ8'*+0'2,ÿ8128921+5'*,ÿ+'ÿ6)ÿ,96(5++)7: 0
ÿÿÿ!ÿ"#$% ;.<9=='0+,ÿ8128921+5'*,ÿ+'ÿ6)ÿ,96(5++)7:
>.?0'@57)ÿA50)ÿ71(=)0,ÿ1+ÿA50)ÿB122,ÿ=)*)+01+5'*,:
C.D50)ÿ71(=)0,ÿ1*7ÿ82)1*5*EÿA52+)0ÿ(9,+ÿ6)ÿ188),,562)ÿ=0'=)02FÿA'0ÿ(15*+)*1*8):
G.D'0ÿE)*)012ÿ*'+),ÿ0)A)0ÿ+'ÿHIJ3.KL.J.JJ.J3M:
N.I98+ÿ0'9+5*Eÿ2'81+5'*ÿOÿ2)@)2PÿL4Q&ÿ)R95=()*+ÿ1*7ÿ188),,'05),ÿ(9,+ÿ6)ÿ «§°§§ ±§ÿ¤¡¥¦§[
8''075*1+)7ÿB5+Sÿ'+S)0ÿ+017),ÿH8'*+018+'0T,ÿ0),='*,56525+FM: H®5 839 K59̄ÿ839 K59 ^5
()*+, U.Q50ÿ6121*85*Eÿ,+97Fÿ6Fÿ,=)85125,+ÿH+S507ÿ=10+FMÿ+'ÿ6)ÿ,96(5++)7: Ö×ØÙÚÚÛÙ×ÙÜÝÛÞÝÛ×ßÛÝÙ×ÛàáÛ×ÛãÙ×ÛÙÙß 99
Ö×ØÙÚÚÛÙ×ÙÜÝÛÞÝÛ×ßÛÝÙ×ÛàáÛâÛÙÙÛÙÙØ 99
-..)/01(2ÿ*)ÿ4./5.4.+.567ÿ08659+52:58668588 V.Q50ÿ'9+2)+,ÿ2'81+5'*,ÿ+'ÿ6)ÿ8''075*1+)7ÿB5+Sÿ0)A2)8+)7ÿ8)525*Eÿ701B5*E,: Ö×ØÙÚÚÛÙ×ÙÜÝÛÞÝÛÙÙÛÝÙÙÛçèÛÚÛçéÛÜÙ× 99
W.<)=101+)ÿ8'(=',5+)ÿ,S'=ÿ701B5*E,ÿA'0ÿ()8S1*5812ÿ,S1A+,ÿ+'ÿ6)ÿ,96(5++)7ÿ ]^_ äáÝÛåäåÖåÛ×ßÛÝÙ×ÛàÖÛáÝÛÙßÛâØÛÙÙÛ××Ùæ 99

-;-/*9+(*ÿ<<=>?@5AB595-<<ÿC1::ÿB+ÿDE/(14F+0ÿ4-9+ÿ-4ÿ-;-/*9+(*ÿ<<=>?@5AB595-><<G H)2)@1+5'*,ÿ1*7ÿ=21*,Mÿ,S'B5*Eÿ05,)0,ÿ75,+0569+5'*PÿA5X1+5'*ÿ1*7ÿ188),,56525+F:
3J.?0'@57)ÿ129(5*9(ÿ,80))*ÿA'0ÿ122ÿ798+ÿ'=)*5*E:

33.YS)0(',+1+ÿ2'81+5'*O2)@)2ÿ+'ÿ6)ÿ8''075*1+)7ÿB5+SÿQ08S:ÿZÿ[2)8:ÿI01B5*E,:
3¨5_
3;.I98+ÿ601*8S),ÿ75()*,5'*,ÿ1*7ÿ2'81+5'*,ÿ=)0ÿ)18Sÿ1=10+()*+ÿ,S122ÿ6)ÿ188'075*Eÿ+'ÿ
1==0'@)7ÿ,S'=ÿ701B5*E,ÿ=)0ÿ)18Sÿ1=10+()*+: ¡¢ ÿ¤¡¥¦§[
3>.?)*)+01+5'*ÿ7)+152,ÿ6Fÿ,=)85125,+ÿA'0ÿA50)O*'*.A50)ÿB122,ÿ+'ÿ6)ÿ,96(5++)7: 6_5 _^]5 ^5
]5]5
3C.YS)ÿ8'*+018+'0ÿ5,ÿ0),='*,562)ÿA'0ÿ18S5)@5*Eÿ,=)85A5)7ÿ*'5,)ÿ805+)051:ÿÿ ]]5ÿ9
]]5ÿ9
I65]^6
O6¨©_
ªL
5]
«§¬ ÿ¤¡¥¦§[
OOKLIÿMI 9N9

839 5]3_ ^5 9
0E.*ÿC)/Òÿ:-Ï)E*5ÿ=>?@ÿDÓÔÔÕ
~QRSÿRZY\[
KIMI8HMÿHNIKÿ
86 0865ÿ-;-/*9+(*ÿ*Ï;+ÿÐ=>?@5AB5-Ñ H1OMÿOKH2I8Hÿ1H
4.-:+, ÿ6ÿ,ÿ7Î HÿNKÍ
ÿ0IK2ÿH1OIÿ
íîïðñòó 5_54 554 ]354
9 99 9N9
]^_ ^5 ^65
ôõö÷ö÷ø÷ô N9H ÿÿ
êëì
ª I 2I ª J
^90649
H®5 3_]^3] O^ © I65¨9 633] O^] 55 5³_9 K59
839 H®5 ²²H®5 556 839 839 839 839

Inspection of Materials Delivered To Site

Uploaded by

Copyright:

Available Formats

Inspection of Materials Delivered To Site

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Inspection of Materials Delivered To Site

Uploaded by

Copyright:

Available Formats

Inspection of materials delivered to site

Employer: Engineer: Contractor

for incorporation in the permanent works.

Signature Hassanein Ali Date : 11-03-2023

Employer: Engineer: Contractor:

Material samples Catalogues Tests Technical sheets

These are transmitted for:

Submitted by: AHMED ABOELFOTOUH Signature: AHMED ABOELFOTOUH

3. Engineeer's Representative comments:

Revise & resubmit

Signature: M.N Date :

S-PRC-SS-02 (F43) Rev 2

Employer: Engineer: Contractor:

1. Material description (one item only on this form) :

Area of application : Tower-D01

Drawing ref. : B.O.Q. ref. no.: 233113-METAL DUCT

Specification Ref. : 233113-METAL DUCT Standards: ASTM A 653/A653M, Z275(G90)

Locally Manufactured Overseas

Delivery : Ex-works/ total duration [ ] [ ]

Program : Date material required on site [ ]

Submitted by : LIU JUNBO Signature: LIU JUNBO

4. Engineer's Representative comments: Approved

Hassanein Ali 19-08-2021

Delivered Material Quantities "MIR"

Subject Total Air Conditioning System

Gross Weight Duct Area Insulation Area

       

OOKLIÿMI   9N9

You might also like

OOKLIÿMI 9N9