Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

SSR Dme

Download as pdf or txt
Download as pdf or txt
You are on page 1of 13

SSR+DME

Email *

saniyaaachaudary@gmail.com

SSR mode C read outs indicate

Height

Altitude

Pressure altitude

Correct answer

Pressure altitude

DME gives range and bearing within


200 nm to

Limited no. Of a/c

Unlimited

Only one a/c


SSR code for entering FIR and radio
failure are

2000/7600

4326/7600

2000/7500

2000/7700

Correct answer

2000/7600

Which of the following is correct?

DME equipment receive TACAN


ranges without modiNcation

A DME station can give ranges upto


200 a/c at a time

Simultaneous DME ranges from 2


stations give a unique Nx

The DME station sends a signal 36


mhz different from the interrogator
The DME provides distance
information to:

Any number of a/c, provided they are


within 200 miles of station

Limited number of a/c within 500


miles of station

Limited number of a/c within 200 nm


of the station

Correct answer

Limited number of a/c within 200 nm


of the station

You’re a/c is being hijacked. What


SSR code should you select on mode
A?

7700

7600

7500

7007
#Which of the following is correct?

A DME transponder in an a/c receives


TACAN ranges

A TACAN transponder on the


ground sends DME ranges

A VORTAC transmitter on the ground


sends TACAN radials

TACAN is not compatible with DME

Which of the following is not an


advantage of secondary radar over
the primary radar?

Ground returns are eliminated

Every a/c within range points on the


screen

The target a/c identiNes itself

Power required by the transmitter


is reduced considerably

Correct answer

Every a/c within range points on the


screen
What accuracy would you expect
from a conventional DME range
indication of 50nm

0.5 nm

1 nm

1.5 nm

2 nm

Correct answer

1 nm

Under normal circumstances, a DME


station can transmit ranges between

50 a/c locked on to it

100 a/c locked on to it

50 a/c search on to it

100 a/c search on to it


If DME is paired with an ILS, where
will the indicated ranges be correct?

In all direction, up to 20 nm

Within the localiser catchment area

In all directions, upto 10 nm

Along the runway centerline in both


directions, upto 20 nm

An a/c is flying at FL 250 with its


altitude alerting system set to that
flight level. If it enters a climb, at
what altimeter indication will the
altitude alert warn the pilot?

25100 ft

25300 ft

25500 ft

25900 ft

Correct answer

25300 ft
How many codes are available in
mode A of SSR?

7777

4069

4096

What approximate frequency is used


for DME?

10 ghz

1000 mhz

10 mhz

1000 khz
What does the SPI facility of an SSR
do?

It sends an extra pulse for 20 s

It switches the mode A response


on and off for 20 secs

It sends an extra pulse for 1 min

It switches the mode A response on


and off for 1 min

Correct answer

It sends an extra pulse for 20 s

How often should the detabase of


the FMC be updated?

Every 90 days

Every 28 days

Every 14 days

After very ]ight


Mode A 7700 is used in the case of
an

Hijack

Emergency

RCF

Mode C gives indication to the


ground about the a/c’s altitude. If the
indications are more than a certain
amount in error, it must be switched
off. What are the limits?

± 50 ft

± 300 ft

± 150 ft

± 200 ft

Correct answer

± 300 ft
In DME the ground beacon uses a
different frequency from that used by
the a/c

To prevent self triggering

To measure distance very


accurately when close to the
station

As it operates on VHF

Correct answer

To prevent self triggering

Name *

Sneha Jauhari

Why are SSR transmissions in pairs


of pulses?

To prevent random noise being


falsely identiNed

To provide side lobe suppression

To indicate the mode of interrogation


Your a/c being hijacked. What SSR
code should you select on mode A?

7700

7600

7500

What form of emission does a DME


signal use?

A2A

A3E

A8W

P0N
If your DME indicator reads 5 nm
and you’re a/c is flying at 24000 what
is your surface range from the
station?

3 km

4 km

5.5 km

8 km

Correct answer

5.5 km

When DME is co-located with I.L.S


then the zero distance will be
indicated at

The ILS threshold

At the DH

AT the MAP

At the VOR
What SSR code would you select on
mode A if you were crossing an FIR
and had not been allocated a specific
code?

Standby

2000

7000

0000

This content is neither created nor endorsed by Google. -


Terms of Service - Privacy Policy

Forms

You might also like