ESD73311CZ

ESD73311CZ

1-Line, Bi-directional, Ultra-low Capacitance Transient http//:www.sh-willsemi.com

Voltage Suppressor

Descriptions

The ESD73311CZ is an ultra-low capacitance TVS

(Transient Voltage Suppressor) designed to protect high
speed data interfaces. It has been specifically designed to
protect sensitive electronic components which are connected DWN0603-2L (Bottom View)
to data and transmission lines from over-stress caused by
ESD (Electrostatic Discharge).
The ESD73311CZ may be used to provide ESD protection up
to ±30kV (contact discharge) according to IEC61000-4-2, Pin1 Pin2
and withstand peak pulse current up to 20A (8/20μs)
according to IEC61000-4-5.
The ESD73111CZ is available in DWN0603-2L package.
Standard products are Pb-free and Halogen-free. Pin configuration

Features

 Stand-off voltage: ±3.3V Max.

 Transient protection for each line according to Device code
IEC61000-4-2 (ESD): ±30kV (contact discharge) Marking (Top View)
: ±30kV (air discharge)
IEC61000-4-5 (surge): 20A (8/20μs) Order information
 Low capacitance: CJ = 0.40pF typ.
 Low leakage current Device Package Shipping
 Low clamping voltage: VCL = 4.5V typ. @ IPP = 16A (TLP)
ESD73311CZ-2/TR DWN0603-2L 10000/Tape&Reel
 Solid-state silicon technology

Applications

 High-speed interfaces
 USB 2.0 and USB 3.2
 Cellular handsets and accessories
 Portable Electronics and Notebooks
 TVs and monitors

Will Semiconductor Ltd. 1 Revision 1.0, 2020/11/26

 ESD73311CZ
Absolute maximum ratings

Parameter Symbol Rating Unit

Peak pulse power (tp = 8/20μs) Ppk 130 W
Peak pulse current (tp = 8/20μs) IPP 20 A
ESD according to IEC61000-4-2 air discharge ±30
VESD kV
ESD according to IEC61000-4-2 contact discharge ±30
Junction temperature TJ 125 oC

Operating temperature TOP -40~85 oC

Lead temperature TL 260 oC

Storage temperature TSTG -55~150 oC

Electrical characteristics (TA=25 oC, unless otherwise noted)

I
VRWM Reverse stand-off Voltage
IR Reverse leakage current IPP
VCL Clamping voltage
IPP Peak pulse current

IHOLD

VHOLD ITRIG
IBR IR
VTRIG VBR VCLVRWM
IR VRWMVCL VBRVTRIG V
I
ITRIG BR
VHOLD
IHOLD
VTRIG Reverse trigger voltage
ITRIG Reverse trigger current
VBR Reverse breakdown voltage
IBR Reverse breakdown current

IPP VHOLD Reverse holding voltage

IHOLD Reverse holding current

Definitions of electrical characteristics

Will Semiconductor Ltd. 2 Revision 1.0, 2020/11/26

 ESD73311CZ
Electrical characteristics (TA=25 oC, unless otherwise noted)

Parameter Symbol Condition Min. Typ. Max. Unit

Reverse maximum working voltage VRWM ±3.3 V

Reverse leakage current IR VRWM = 3.3V 100 nA

Reverse breakdown voltage VBR IT = 1mA 6.0 7.0 8.0 V

Clamping voltage 1) VCL IPP = 16A, tp = 100ns 4.5 V

Dynamic resistance 1) RDYN 0.12 Ω

Clamping voltage 2) VCL VESD = 8kV 5.4 V

IPP = 1A, tp = 8/20μs 2.5 3.5 V

Clamping voltage 3) VCL
IPP = 20A, tp = 8/20μs 5.5 6.5 V

Junction capacitance CJ VR = 1.5V, f = 1MHz 0.40 0.60 pF

Notes:

1) TLP parameter: Z0 = 50Ω, tp = 100ns, tr = 2ns, averaging window from 60ns to 80ns. RDYN is calculated from 4A to 16A.
2) Contact discharge mode, according to IEC61000-4-2.
3) Non-repetitive current pulse, according to IEC61000-4-5.

Will Semiconductor Ltd. 3 Revision 1.0, 2020/11/26

 ESD73311CZ
Typical characteristics (TA=25oC, unless otherwise noted)
100
Front time: T1= 1.25 T = 8μs
100 90
Peak pulse current (%)

Time to half-value: T2= 20μs

90

Current (%)
50
T2

10 10
0
0 T 5 10 15 20 25 30 30ns 60ns t
T1 Time (μs) tr = 0.7~1ns
Time (ns)
8/20μs waveform per IEC61000-4-5 Contact discharge current waveform per IEC61000-4-2

5.6 0.46
Pulse waveform: tp = 8/20s f = 1MHz
CJ - Junction capacitance (pF)

5.2 0.45
VAC = 50mV
VC - Clamping voltage (V)

4.8 0.44
0.43
4.4
0.42
4.0
0.41
3.6
0.40
3.2
0.39
2.8 0.38
2.4 0.37
2 4 6 8 10 12 14 16 18 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0
IPP - Peak pulse current (A) VR - Reverse voltage (V)
Clamping voltage vs. Peak pulse current Capacitance vs. Reverse voltage

1000 100
Peak pulse power (W)

80
% of Rated power

60
100

40

20
10
0
1 10 100 1000 0 25 50 75 100 125 150
o
Pulse time (s) TA - Ambient temperature ( C)

Non-repetitive peak pulse power vs. Pulse time Power derating vs. Ambient temperature

Will Semiconductor Ltd. 4 Revision 1.0, 2020/11/26

 ESD73311CZ
Typical characteristics (TA = 25 oC, unless otherwise noted)

10V/div

10V/div

20ns/div 20ns/div

ESD clamping ESD clamping

(+8kV contact discharge per IEC61000-4-2) (-8kV contact discharge per IEC61000-4-2)

20
Z0 = 50
15 tr = 2ns
10 tp = 100ns
TLP current (A)

5
0
-5
-10
-15
-20
-8 -6 -4 -2 0 2 4 6 8
TLP voltage (V)
TLP Measurement

Will Semiconductor Ltd. 5 Revision 1.0, 2020/11/26

 ESD73311CZ
PACKAGE OUTLINE DIMENSIONS

DWN0603-2L

D
W
E

H
P

TOP VIEW BOTTOM VIEW

A

SIDE VIEW

Dimensions in Millimeters
Symbol
Min. Typ. Max.
A 0.29 0.31 0.34
E 0.29 0.32 0.35
D 0.59 0.62 0.65
W 0.15Ref
H 0.21Ref
P 0.38Ref

Recommend land pattern (Unit: mm)

0.18 0.20
0.25

Notes:
This recommended land pattern is for reference
0.38 purposes only. Please consult your manufacturing
0.58
group to ensure your PCB design guidelines are met.

Will Semiconductor Ltd. 6 Revision 1.0, 2020/11/26

 ESD73311CZ
TAPE AND REEL INFORMATION
Reel Dimensions
Reel Dimensions

RD
Tape Dimensions

W
P1

RD Reel Dimension 7inch 13inch

W Overall width of the carrier tape 8mm 12mm

P1 Pitch between successive cavity centers 2mm 4mm 8mm

Will Semiconductor Ltd. 7 Revision 1.0, 2020/11/26