Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • ASG-158 C (E)

    Uploaded by

    Unes Ahrar
    21 views3 pages
    1. The ASG-158 is a 1/8 DIN high-speed load cell meter that can sample up to 2000 times per second. 2. It has features like built-in excitation for the sensor, two setpoint outputs, and an SPC function for comparing intermediate pressure values. 3. The meter has inputs for various sensors, outputs including relay, photocoupler, RS-232, and analog, and can store setup data for 10 years.

    Original Description:

    Original Title

    ASG-158_c(e)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    1. The ASG-158 is a 1/8 DIN high-speed load cell meter that can sample up to 2000 times per second. 2. It has features like built-in excitation for the sensor, two setpoint outputs, and an SPC function for comparing intermediate pressure values. 3. The meter has inputs for various sensors, outputs including relay, photocoupler, RS-232, and analog, and can store setup data for 10 years.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    21 views3 pages

    ASG-158 C (E)

    Uploaded by

    Unes Ahrar
    1. The ASG-158 is a 1/8 DIN high-speed load cell meter that can sample up to 2000 times per second. 2. It has features like built-in excitation for the sensor, two setpoint outputs, and an SPC function for comparing intermediate pressure values. 3. The meter has inputs for various sensors, outputs including relay, photocoupler, RS-232, and analog, and can store setup data for 10 years.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 3

    1/8 DIN High-Speed Load Cell (Strain Gauge) Meter ASG-158

    Features
    ★ Standard DIN size.
    ★ High-speed sampling (2000 times per second).
    ★ Original function 'SPC' (Section point compare) is useful to compare
    intermediate pressure on process of pressure increasing (caulking).
    ★ Built in excitation (sensor power supply) 5V, 10V selectable.
    ★ 2 setpoints comparative output.

    Ordering code
    ASG - 158 - -

    Code Power supply Code Output Code Comparative output Built in excitation
    Code
    1 90 to 110Vac 1 None 1 Relay (sensor power supply)
    2 180 to 220Vac 2 BCD (Open collector) 2 Photo coupler 3 5V
    3 BCD (TTL) 4 10V
    5 RS-232C
    6 Analog output (4 to 20mA)
    7 Analog output (0 to 10V)

    Specifications
    ◆General specifications
    ■Measurement specifications
    Operating method Sequential comparison method
    Accuracy ±(0.15% of FS +1 digit) (23±5°C)
    Sampling rate 2000 times per second
    Display Main display : Red 7 segment LED (height 14.2mm)
    Comparative setting display : Green 7 segment LED (height 8mm)
    Temperature coefficient ±(0.005% FS of reading + 0.5 digit) per °C
    Polarity '-' is displayed automatically at negative polarity
    Over range display When input exceeds the maximum display, 'o.L.' or '-o.L.'
    Zero display Leading zero suppression
    Monitor display Peak hold (PH), Digital zero (DZ), Digital zero backup (ME)
    Applicable sensor Strain gauge method each type sensor (350Ω)
    Built in excitation 5Vdc±10% 60mA or 10Vdc±10% 30mA selectable
    (Sensor power supply)
    Zero adjustment range -3 to +2.0mV/V
    Gain adjustment range 1.0 to 3.0mV/V
    Minimum input sensitivity At Built in excitation 5Vdc : 0.5µV/digit
    At Built in excitation 10Vdc : 1.0µV/digit
    Maximum input voltage 3.0mV/V
    Macimum display 9999 (4 digits)
    Decimal point Able to set to any digit (Swiches by key switch)

    ■External control specifications


    Hold Short COM terminal and S/H terminal at logic '0' level
    Start Open COM terminal and S/H terminal at logic '1' level
    Digital zero Short COM terminal and DZ terminal, memorize the value and display the display value
    Peak hold / Peak valley hold The type of peak hold by the each comparative 1 to 4's setup. (Swiches by front key SW)
    Pattern select Able to set 4 patterns in the combination of COM terminal and P.SEL terminal 0, 1
    Comparative number Short theCOM terminal and comparative terminal C1, C2, C3, C4 or '0' LEVEL.
    Clear Release the comparative result etc. at '0' level and short

    ■Comparative output specifications


    Control method Microcomputer calculation method
    Setup range Lower setup '-9999 to +9999' above including the polarity
    Comparative operation The continuous comparison by comparative No.1 or
    one point comparison by comparison No.1 to 4
    Comparative condition Comparative condition Result
    Measurement value > Upper limit set value HI
    Upper limit set value ≥ Measurement value ≥ Lower limit set value GO
    Lower limit set value > Measurement value LO
    Comparative relay Contact volume 120Vac 0.5A Resistive load
    Contact volume 28Vdc 1A Resistive load
    Photocoupler output Voltage MAX 30V electric current MAX 20mA
    (NPN type) Less than 1.2V at setting output saturated voltage 20mA
    Hysteresis Configurable from 1 to 999 digit in each comparative setup (only comparative No.1)

    Watanabe Electric Industry Co., Ltd.


    http://www.watanabe-electric.co.jp/en/ 1/3
    ◆Common specifications
    Memory backup Keep the setup data for about 10 years at EEPROM
    Operating temperature -5 to 50°C
    Operating relative humidity 35 to 85% (non-condensing)
    Storage temperature/humidity -10 to 70°C 60%RH or less
    Power supply 100Vac ±10% or 200Vac ±10% (50/60Hz)
    Power consumption 7VA max. at 100Vac
    Dimensions 96mm(W) x 48mm(H) x 144mm(D) DIN size
    Weight Approx. 550g
    Dielectric strength 500VAC per 1 min. : Between Input terminal - Comparative output
    Between Input terminal - Output COM terminal (BCD : D.COM, ANALOG OUT : -, RS-232C :SG)
    1500VAC per 1 min. : Between Power supply terminal - Input terminal, case, comparative output
    1500VAC per 1 min. (Power supply 100Vac specification),
    2100VAC per 1 min. (Power supply 200Vac specification) :
    Between Power supply terminal - Output COM terminal (BCD : D.COM, ANALOG OUT : -, RS-232C :SG)

    Insulation resistance 500Vdc, 100MΩ or more on the above terminals


    Noise immunity Power supply terminal normal / common mode ±1500V rising 1ns square wave noise range 500ns
    Accessory Instruction manual / terminal cover

    ◆Input / output specifications


    ■BCD data output specifications
    TTL
    Measurement data Tristate parallel BCD positive logic latch output
    Polarity signal [1] level at negative display
    Over signal [1] level at over display
    Printing command signal Positive pulse at a certain period in each measurement completion basis (by sampling speed)
    Above signal TTL level fan out = 2
    5V CMOS compatible. Negative logic available

    Open collector (NPN type)


    Measurement data At the negative logic 'logic 1', transistor 'ON'
    Polarity signal At the negative display, transisstor 'ON'
    Over signal At the OVER signal, transistor 'ON'
    Printing command signal After completed the measurement in a certain period, setting transistor 'ON' (by the same sampling rate.)
    Transistor output volume Voltage MAX 30V, Electric current MAX 15mA
    Less than 1.2V at setting output saturated voltage '15mA'
    Output response 750µs

    ★ ENABLE input
    Short between Enable terminal and D.COM terminal or setting '0' level, the data output will be high impedance.
    ■RS-232C output specifications
    Electric characteristic In conformity with EIA RE-232C
    Synchronization scheme Start-stop synchronization method
    Communication system Full duplex
    Transmission speed 2400 / 4800 / 9600 / 19200 bps
    Start bit 1 bit
    Data length 7 bit
    Error detection Even parity
    Stop bit 2 bit
    Delimiter CR/LF
    Character code ASCII code
    Transmission control 750µs
    procedure

    ■Analog output specifications


    Able to set any display range of analog output,
    Resolution Equicalent to 14bit
    Temperature coefficient ±200ppm per °C
    Output response 700µs (10% to 90%)
    Analog output Load resistance Accuracy Ripple
    0 to 10V 10kΩ or more ±(0.5% of FS) 50mV-p
    4 to 20mA 0 to 270Ω 25mV-p
    Accuracy is when (23±5°C 45 to 75%RH)
    4 to 20 ripple is when Load resistance 250Ω, Current 20mA

    Dimensions
    ◆Front view ◆Back view ◆Panel cutout

    (Unit : mm)

    Watanabe Electric Industry Co., Ltd.


    http://www.watanabe-electric.co.jp/en/ 2/3
    Terminal connections
    ◆Upper side screw terminal
    Photocoupler

    Relay output

    ◆Lower side screw terminal

    ◆BCD output

    (MIL standard conformity connector)

    Notes : Unable to use NC terminal as intermediate terminal.

    ◆Analog output

    Notes : Unable to use NC terminal as intermediate terminal.


    In case analog output model, either 4-20mA or 0-10V is available.

    ◆RS-232C D-sub

    Applicable connector 17 JE-23250-02 (OSA) (DDK company made).

    Notes : Unable to use terminal as intermediate terminal.

    ＊ Specification is subject to change without notice

    Watanabe Electric Industry Co., Ltd.


    http://www.watanabe-electric.co.jp/en/ 3/3

    You might also like