Service Manual

FLIP 5 (S/N Starting from CS)

SKU: JBLFLIP5BLK, JBLFLIP5BLU, JBLFLIP5RED, JBLFLIP5GRY, JBLFLIP5TEAL, JBLFLIP5WHT, JBLFLIP5GREN, JBLFLIP5YEL,
JBLFLIP5PINK, JBLFLIP5SAND, JBLFLIP5BLKAM, JBLFLIP5BLUAM, JBLFLIP5REDAM, JBLFLIP5GRYAM, JBLFLIP5TEALAM,
JBLFLIP5WHTAM, JBLFLIP5GRENAM, JBLFLIP5YELAM, JBLFLIP5PINKAM, JBLFLIP5SANDAM

CONTENTS
Technical Specifications 2
Safety Instruction 3
Button Function Mapping 6
Disassembly Instruction 7
Set Block Diagram 11
Set Wiring Diagram 12
Circuit Diagrams 13
PCBA layout Diagrams 22
Mechanical Exploded View 29
Spare Parts List 30
Revision List 32

Released by Global Quality harman/kardon, Inc. Ver. 1.0 Apr. 2019

8500 Balboa Blvd.
Northridge, CA 91329
TECHNICAL SPECIFICATIONS
· Model name: Flip 5

· Bluetooth version: 4.2

· Signal-to-noise ratio : >80dB

· Support : A2DP V1.3, AVRCP V1.6

· Transducer :44X80mm

· Rated power : 20W RMS

· Battery type: Lithium-ion polymer 17.3WH(Equivalent to 3.6V 4800MAH)

· Battery charge time: 2.5 hours (5V/2.3A)

· Frequency response: 60Hz-20kHz

· Music playtime : Up to 12 hours (Varies by volume level and audio content)

· Bluetooth transmitter power : 0 -20DBM

· Bluetooth transmitter frequency range : 2.402 - 2.480GHZ

· Bluetooth transmitter modulation : GFSK, π/4 DQPSK , 8DPSK

· Dimensions (W × D × H): 181 x 69 x 74 mm

· Weight: 538g
 3-1

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions. CAUTION
3. Heed all warnings.
4. Follow all instructions. RISK OF ELECTRIC SHOCK. DO NOT OPEN.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL,
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED
third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
“DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S
replacement of the obsolete outlet. ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged TRIANGLE IS INTENDED TO ALERT THE USER TO
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the THE PRESENCE OF IMPORTANT OPERATING AND
apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, LITERATURE ACCOMPANYING THE PRODUCT.
are placed on the apparatus.
16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC
receptacle. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
17. The mains plug of the power supply cord shall remain readily operable. SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
18. Do not expose batteries to excessive heat such as sunshine, fire or the like.

For Products That Transmit and For Canadian Model Caution:

Receive RF Energy: This Class B digital apparatus complies with Canadian This product uses a laser system. To prevent direct exposure
ICES-003. to the laser beam, do not open the cabinet enclosure or defeat
FCC Regulations (USA Only) any of the safety mechanisms provided for your protection.
DO NOT STARE INTO THE LASER BEAM. To ensure proper use
FCC Information For Users Modèle pour les Canadien of this product, please read the owner’s manual carefully and
This device complies with Part 15 of the FCC Rules. Operation retain it for future use. Should the unit require maintenance
Cet appareil numérique de la classe B est conforme à la or repair, please contact your local Harman Kardon service
is subject to the following two conditions: (1) This device norme NMB-003 du Canada.
may not cause harmful interference; and (2) this device must center. Refer servicing to qualified personnel only.
accept any interference received, including interference that
may cause undesired operation. For Products with Radio Receivers For Products That Include Batteries:
Radio and Television Interference That Can Use an External Antenna:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
CATV or Antenna Grounding
of the FCC Rules. These limits are designed to provide If an outside antenna or cable system is connected to this
reasonable protection against harmful interference in a product, be certain that it is grounded so as to provide some
residential installation. This equipment generates, uses and protection against voltage surges and static charges. Section
can radiate radio frequency energy and, if not installed and 810 of the National Electrical Code, ANSI/NFPA No. 70-1984,
used in accordance with the instructions, may cause harmful provides information with respect to proper grounding of the Instructions for Users on Removal and Disposal of
interference to radio communications. However, there is no mast and supporting structure, grounding of the lead-in wire Used Batteries.
guarantee that interference will not occur in a particular to an antenna discharge unit, size of grounding conductors, CAUTION
installation. If this equipment does cause interference to radio location of antenna discharge unit, connection to grounding
or television reception, which can be determined by turning electrodes and requirements of the grounding electrode. Risk of explosion if battery is incorrectly replaced.
the equipment off and then on, the user is encouraged to try Replace only with the same or equivalent type.
to correct the interference by one or more of the following Note to CATV System Installer: Alkaline batteries are considered nonhazardous.
measures:
This reminder is provided to call the CATV (cable TV) system Rechargeable batteries (i.e., nickel cadmium, nickel metal-
• Increase the separation between the equipment and installer’s attention to article 820-40 of the NEC, which hydride, lithium and lithium-ion) are considered hazardous
receiver. provides guidelines for proper grounding and, in particular, household materials and may pose an unnecessary health
• Connect the equipment to a different outlet so that the specifies that the cable ground shall be connected to the and safety risk.
equipment and receiver are on different branch circuits. grounding system of the building, as close to the point of
cable entry as possible. In the European Union and other locations, it is illegal to
• Consult the dealer or an experienced radio/TV technician dispose of any battery with household trash. All batteries
for help. must be disposed of in an environmentally sound manner.
NOTE: Changes or modifications not expressly approved For CD/DVD/Blu-ray Disc™ Players: Contact your local waste management officials for information
by Harman could void the user’s authority to operate the regarding the environmentally sound collection, recycling and
equipment. disposal of used batteries.
To remove the batteries from your equipment or remote
IC Statement and Warning (Canada Only) control, reverse the procedure described for inserting
This Class B digital apparatus complies with Canadian ICES- batteries in the owner’s manual.
003. Cet appareil numérique de la classe B est conforme à la For products with a built-in battery that lasts for the lifetime of
norme NMB-003 du Canada. the product, removal may not be possible for the user. In this
case, recycling or recovery centers handle the dismantling of
the product and the removal of the battery. If, for any reason, it
becomes necessary to replace such a battery, this procedure
must be performed by authorized service centers.
 3-2

Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called

Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field effect transistors and

semiconductor "chip" components.

The following techniques should be used to help reduce the incidence of component damage caused by static electricity.

1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on

your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device,

which should be removed for potential shock reasons prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to

prevent electrostatic charge build-up or exposure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.

4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static" can generate electrical charges

sufficient to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate electrical change sufficient to damage ES devices.

6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement

ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material.)

7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the

chassis or circuit assembly into which the device will be installed.

CAUTION : Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together

or your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity sufficient to damage an ES devices.

Each precaution in this manual should be followed during servicing.

Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with

, use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the

parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts are acceptably

insulated from the supply circuit before retuming the product to the customer.
 3-3

SAFETY PRECAUTIONS

The following check should be performed for the continued

protection of the customer and service technician.

LEAKAGE CURRENT CHECK

Measure leakage current to a known earth ground (water

pipe, conduit, etc.) by connecting a leakage current tester
between the earth ground and all exposed metal parts of the
appliance (input/output terminals, screwheads, metal
overlays, control shaft, etc.). Plug the AC line cord of the
appliance directly into a 120V AC 60Hz outlet and turn the
AC power switch on. Any current measured must not exceed
o.5mA.

Reading should
not be above
Leakage
0.5mA
Device current
under tester
test

Test all
exposed metal
surfaces
Also test with plug
reversed (Using
AC adapter plug Earth
as required) ground

AC Leakage Test

ANY MEASUREMENTS NOT WITHIN THE LIMITS

OUTLINE D ABOV E AR E INDICATIV E OF A
POTENTIA L SHOC K HAZAR D AN D MUS T BE
CORRECTED BEFORE RETURNING THE APPLIANCE
TO THE CUSTOMER.
BOTTON FUCTION MAPPING

Button Pattern Action Indicator

Volume + & Bluetooth Long press > 10s Enter HID DFU mode in On Mode.
Volume + & Phone Long press > 2s Reset to factory default in On Mode.
Volume - & Bluetooth Long press >10s Enter by-pass mode in On Mode.
Volume - & Phone Long press >10s Enter Regular DFU mode in On Mode.
Volume - & Link Long press > 2s Show SW version in On Mode.
Volume + & Link Long press >10s Enter Demo mode in On Mode.
Remark: all combination function shall triggered by long pressing.
Table 4 Combination button for debug and factory test
 Disassembly Instructions
1: Take out the graphic carton 2: Take out the inner box 3:Open the inner box

4: Take out the product 5: Remove the grille 6: Remove wrapping housing
 7: Remove screw as shown and take out
the metal ring and recess 8: Take off PR for both side

9: Remove 4 screws as shown 10: Take out the driver

1 4

1 2
3 2

4
3
 ·
11：Pull out the driver cable 12：Unplug 3 connectors

1
3

13: Tear off antenna 14: Unplug Mic connector 15: Pull out main PCBA and battery

1 1
 17: a. Take out Type-C socket
16: Unscrew below 6 screws
b. Teal off volume silicone button

c. Teal off power silicone button

c
5
3
1

6 a
4
2

18: Unscrew below 2 screws and take out LED PCBA 19: Unscrew below 2 screws and take out Key PCBA
HMM JBL Flip5 Block Diagram

5V/3A
Battery DC-DC
I2C CHARGER
MP2695 3.8V SY7069

+3.5V_SYS
LDO DC-DC AMP_5.2V-14V
LP3984H MP3431 LDO LDO
LP3984H LP3984H

+3.3V_SLG4V4 DCDC_BIAS
VCC_+3.3V_BT&IO VCC_+3.3V_OP

+3.3V_SLG4V4 VCC_+3.3V_OP

PowerButton
Logic OP
SLG46140 TP2412 AMP_5.2V-14V

ANT BAT_3.8V
DCDC_BIAS

I2C
128MHz Analogsignal

Upgrade
BTMODULE AMP
TPA3128D2
3ohm/20W
TypeCUSBport JX265-Q1 Mute

Analog
I2C
VCC_+3.3V_BT&IO

MIC I/OExpander
LEDs
AW9110
ButtonS
Flip5 Wiring Diagram

Speaker
Red
3 ohm
Black

Main Board

Battery
Led&key board

Key Board
USB Board

MIC

ANT
Main Board_BT & IO

R217 0R

2
R216 NC

RF1 R158 0R

POWER_W_LED
1 R81 SWCLK
RFCON 0

R164
TP19
SYS_3V3
C14 C15
NC
NC NC TP33
Mic Circuit(Close To BT Modle Circuit)

3
POWER_LED_CONTROL R80
MIC_BIAS
1K
SWDIO C81 C13
106P 103P
AMP_MUTE TP16 R82

TP18
2.2K

77

76

75

74

73

72

71

70

69

68

67

66

65

64
GPIO_L_16/SD_LOCK

GPIO_L_3/VBS_DRV
GPIO3/UART0_RX

RFOUTANT

GPIO5/SWCLK
SD_CMD

GPIO6/SWDIO
SD_DATA1

SD_DATA0

SD_DATA3

SD_DATA2
SD_SLK
GND6

GND5
POWER_LED_CONTROL
R45 10K Q12
MIC_IN
C84
L5 1
U10 2N3904 104P 15nH/300mA
MODULE-JX265-01-V1.3
C31
2
R50
4.7 104P C86
DC_DET_BT C85 39P ESD2
15P 150TA
J3
TP21 TP20
R96 1K
GPIO_20
AMP_SDZ
1 63
GPIO4/UART0_CTS GND4
TP23
TP22 2 62 TP28
GPIO1/UAR0_TX GPIO20/I2S1_LR
KEY_LINK
3 61 POWER_ON_OFF
GPIO2/UART0_RTS GPIO21/I2S1_DI

4 60 BOOST_EN
GND0 GPIO22/I2S1_DO
ESD10

150TA 5 59
VDD_FEM VDD_FEM GPIO19/I2S1_SCLK TP32 R162 R39 NTC2
130K 10K
VDD33
BOOT_SEL 6 58 IO_INT
BOOT_SEL GPIO_L_2/SD_DETECT
C92 C90
R160 104P
57 5pF C89
FEM_LDO_EN 7 GPIO7/PROM_SCL USB_VBUS USB_5V 475P
NC
TP24
TP25 8 56 USB_DM
GPIO8/PROM_SDA USB_DN

9 55 USB_DP
GND1 USB_DP

KEY_PLAY 10 54 USBVCCA33
GPIO16/I2S0_LR USB_ID
C93

KEY_BT 11 53 C91 5pF

GPIO17/I2S0_DI USBVCCA33 105P

VCHG KEY_VOL+ 12 52
GPIO15/I2S0_SCLK GND3

51 R161 0R
KEY_VOL- 13 GPIO18/I2S0_DO
R94
MICRN
SYS_3V5 0R TP3 SYS_3V3
BAT_DET 14 50 NTC2
VBAT MICRP
R156
R97 49 C94
USB_5V 15 VCHG 0R
MICLN TP51 GPIO13
NC 225P
VDD_FEM
C96 16 48 MIC_IN Q1
PWR GND2 MICLP
106P NC FB2 TP54 BOOT_SEL
47 SYS_3V3
VDD33 17 VDD33 MBIAS MIC_BIAS 1K@100M
R98 0R C87
VREG_EN C88 C155
106P
18 46 R152 104P 33P
PWR AGND
NC
R99 NC 45 TP57 VCHG
REST 19 RST HPOUTRN BT_R-
R78
TP56
44 NC
C95 INT 20 GPIO_L_13/LCD_D5 HPOUTRP BT_R+
105P

/SHDN 21 43 R142 Q9
GPIO_L_4/LCD_CSB HPOUTLN
TP29 NC NC
R102 42
SYS_3V3 AIO 22 AIO HPOUTLP
FEM_LDO_EN
R155 TP49
NC TP34
NC
POWER_OFF_READY 23 GPIO11/SPI_DO 41 GPIO11
GPIO_L_14/LCD_D6

GPIO_L11 24 GPIO_L_11/LCD_D3 GPIO12/SPI_CLK 40

TP31 TP46 GPIO_L10

Q5
GPIO_L_7/LCD_CLK[D0]

BOOT_SEL
GPIO_L_5/LCD_DO[D1]

GPIO_L_0/SPI_HOLDB

2N3906
GPIO_L_8/LCD_WRN

3
GPIO_L_9/LCD_RDN

2 PWR TP50
GPIO_L_1/SPI_WPB
GPIO_L_12/LCD_D4

GPIO_L_10/LCD_D2

GPIO13_UART1_TX

GPIO14/UART1_RX
25 GPIO_L_15/LCD_D7

GPIO_L_6/LCD_A0

GPIO9/SPI_CSB

SYS_3V3 USBVCCA33
GPIO10/SPI_DI

SYS_3V3 C138
ESD9 ESD7
C139
100K

1
FLASH_CS

104P
150TA 104P 150TA
R112 R115 R106
10K 4.7K R116
4.7K R109
INT
26

27

28

29

30

31

32

33

34

35

36

37

38

39

10K

USB_5V R113
I2C_SDA I2C_SCL Q6
R107 BAT_DET
C98 C97 2N3904
5p 5pF 0R 47K
TP43

R157
TP42

R163
NC 10K C119 C120
R114 104P 106P
100K
CONTROL_14V

TP27

I2C_SDA
GPIO13

GPIO14

GPIO9

FLASH_CS
SYS_3V3

GPIO_L10
I2C_SCL
TP35

DETECT5V_2.3A
Main Board_Charge

TP4

C39
106P

4 13
SMID NC
3 12
FMID NC
TP5
R192 0R
21 C160
TP6
BST 474P
FB1 30/3A
USB_5V 7
VIN
RS1
8 2 L2 10MR
BAT
VIN SW
1uH
C18 C42 C44
106P
104P 104P
9
CSP C48
6 104P
NC 10
5 BATT
NC
INT 14
INT
RT1 8.66K RT3 20R RT2 130K RT5 11k
I2C_SCL 15 20
SCL VRNTC
I2C_SDA 16 18 NTC1
SDA NTC
R36
17 19
IB VCC

AGND

PGND
C21
100K 1
104p
BAT
C45 2
105P
NTC1
U3

11

1
C46 3
MP2695A 475P NTC2
4

BAT
CON4P

SYS_3V3 R188 R186 DETECT5V_2.3A

47K 1K

C158 C157
105P 104P
5

4
OUT
V+

U13
LMV331TP
+IN

-IN
V-
1

R185 51K
USB_5V
R183
USB_DM
R184 NC
39.2K

R194
10K
USB_DP
Main Board _ Power

+13V

R25
470K
C33 C34 C35
C25 106P 103P
104P 104P
BAT R26
L1 C166 15K
R91
1.5uH 4R7 220uF/25V

C23 C24

C22 106P 104P C38

2.2nF

13
220uF/16V

1
SW

BST
12
VIN
8
11 VOUT
EN

5 R30
DC_BIAS
10 FB 47K
MODE
R20
2 4 C30

NC
VDD COMP 103P

BOOST_EN R19 3 9 R22

47K改120K
R28
SS ILIM 120K

AGND

PGND
1K 1K

R23 R24
18K 15K
C26 R21 C27
改12K

7
NC C28
R18 104P 475P R29
224P U2 C29
0R
100K 472P
MP3431

TP2

S 8
+13V 1 D +PVCC

S
C36 2 D 7
104P R31

100K
S
3 D 6

4 5
G D

C37
104P
R32 U44
1K ME4435

Q2 R34
BOOST_EN
2N3904 10K

R33

100K
Main Board _ Ampilifier

+PVCC

R1

GPIO_20
10R
C57
C56 106P
C2 104P
330P

GVDD L6
R5
10uH
NC
SD
R101 R43
AMP_SDZ R8 GVDD
NC 56R
1K
C9
R100 C7
C6 102P
104P
R86 684P
BT_R+ C163 225P NC NC
R2
0R U6 C8
332P

GVD R89 1 MODSEL PVCC 32

R51 C41 C3
1K
NC 150P 2 SD PVCC 31 NC
1% 3 30 C62 224P
FAULT BSPR
R6 4 RINP OUTPR 29
NC R87
1%
BT_R- C12 225
5 RINN GND 28
0R 6 PLIMIT OUTNR 27 TP

7 GVDD BSNR 26 C67 224P

8 GAIN/SLV GND 25

THERMAL_PAD
224P
9 GND BSPL 24 C68

10 LINP OUTPL 23
11 LINN GND 22 C4 1
C11 C10
/MUTE 12 MUTE OUTNL 21 NC
105P R16 104P C71 224P
5.6K 13 AM2 BSNL 20 2
1% 14 AM1 PVCC 19
15 AM0 PVCC 18
16 SYNC AVCC 17 R108 +PVCC R3

10R NC SPK

33
TPA3128D2
C77 C78
TP
104P 106P
C1
330P C65
C79 C165 332P
C82
C80
220uF/25V 684P
C5
104P
102P

R4
56R

L10
10uH

TP

GVDD TP

TP
TP
R9
47K
TP

R10
/MUTE
NC

R12 Q7
AMP_MUTE
2N3904
10K

R11
100K
Main Board _ IO

SYS_3V3
FB3
1k@100m

C99
C153
I/O Expander
104P
NC

2
VCC
13 BT_W_LED C101
OUT6 ESD17
104P
I2C_SCL 20 14 150TA
SCL OUT7
ESD16 ESD15
I2C_SDA 1 U1 16 RING_W_LED
SDA OUT8 150TA 150TA
5 17

LED1
AW9110

LED2

LED3
R118 1K R124
/SHDN

16
SHDN OUT9
NC

C100
100p
KEY_BT 15

14

BT_W_LED 13
7 LED1_Red(5%-10%)
OUT0 TP36
SYS_3V3 R121 10K 6 12
AD1 8 LED2_WHITE(10%-20%) TP37
POWER_W_LED
OUT1
9 LED3_WHITE(20-40%) RING_W_LED 11
OUT2 TP38
R122 10K 19
AD0 POWER_KEY 10
10 LED4_WHITE(40-60%)
OUT3 TP39
9
R120 10K 4 11 LED5_WHITE(60-80%)
SYS_3V3 INTN OUT4 TP40

12 8
LED6_WHITE(80-100%) TP41
OUT5
IO_INT SYS_3V3 7
PAD-GND

3
GND0
LED6 6
GND

NC

LED5 5

LED5

LED6
LED4
15

18
21

LED4 4

LED3 3

LED2 2

LED1 1
CN1

CN-15PN+2PAD
1 1

17
SYS_3V3 2 2 SYS_3V3

KEY_PLAY1 3 3 KEY_PLAY1
R125 10K KEY_PLAY

KEY_VOL+1 4 4 KEY_VOL+1
R126 10K KEY_VOL+

KEY_VOL-1 5 5 KEY_VOL-1R130 10K KEY_VOL-

KEY_LINK1 6 6 KEY_LINK1 R133 10K KEY_LINK

SYS_3V3
CN5 CN6
CON6P CON6P
SW1
KEY_PLAY1
PHONE
2

ESD5 ESD6 ESD12 ESD11

105P
C32 150TA 150TA 150TA 150TA
1

SW2
KEY_VOL+1
VOL+

SW3
KEY_VOL-1
VOL-

SW4
KEY_LINK1
LINK
LED Board _ IO & KEY

R27 200R KEY_BACK_LIGHT6 LED18 A K

WHITE

R15 200R KEY_BACK_LIGHT6 LED17 A K

WHITE
SW5
R150
SYS_3V3
10K KEY_BT1
R177 200R KEY_BACK_LIGHT1 LED14 A K BT
WHITE

SW6
R176 200R KEY_BACK_LIGHT2 LED13 POWER
A K POWER_KEY1
WHITE
ESD13
ESD14

150TA 150TA
R175 200R KEY_BACK_LIGHT3 LED11 A K
WHITE

R174 200R KEY_BACK_LIGHT4 LED10 A K

WHITE

Q4
PNP_3CG3906M
R173 200R KEY_BACK_LIGHT5 LED9 A K
WHITE

R35 47K

R172 200R KEY_BACK_LIGHT6 LED7 A K

WHITE

16
R83

TP1
RING_W_LED1
1k
KEY_BT1 15

(5-10%) 14
R13 0R R170 200R LED6
SYS_3V3_1 A K LED1_1
RED BT_W_LED1 13

POWER_W_LED1 12
(10-20%)
C121
R169 200R LED5 A K LED2_1 RING_W_LED1 11
104P
WHITE
POWER_KEY1 10

9
TP44
(20-40%) R168 200R LED4 A K LED3_1
8
WHITE
SYS_3V3_1 7
(40-60%) LED3
R167 200R A K LED4_1 LED6_1 6
WHITE 5
LED5_1

(60-800%) LED4_1 4
R165 200R LED2 A K LED5_1
LED3_1 3
WHITE
LED2_1 2

(80-100%) R166 200R LED1 A K LED6_1 LED1_1 1

WHITE

CN7

17
R153 200R LED8 A K CN-15PN+2PAD
BT_W_LED1
WHITE

R110 200R LED16 A K

WHITE

LED12
R88 200R A K POWER_W_LED1
WHITE

R103 200R LED15

A K
WHITE
USB Board _ IO

XP1
TYPE_C-UT1117

2 14
XP1 XP1
3 15
XN1 XN1

4 16
VBUS VBUS

5 17
C1 SBU2
TYPE_C_USB_DP 6 18 TYPE_C_USB_DM
DP1 DN2
TYPE_C_USB_DM 7 19 TYPE_C_USB_DP
DN1 DP2
8 20
SBU1 CC2
CC1
9 21
TYPE_C_5V VBUS VBUS TYPE_C_5V

C83 10 22
102P
R17 XN2 XN2 R84
5.1K C20
11 23 5.1K

GND

GND

GND

GND
1% XP2 XP2 102P

12

13

24
1

BAT_DET
USB_5V
USB_5V
USB_DP1

USB_DP
FB4
22R
1
1

2
R7
22K
R190
22K
R37
NC !
2
USB_DM 5V_DET_SL DC_DET_BT AIO
FB6 USB_5V
22R CN4 C159 C19
C164
CN3 USB_5V R79
102P
R191
102P
R38
NC
33K 33K NC

USB_DM1

R93 R95 ESD1

ESD3 ESD4
470K nc
150TA 150TA 150TA
1% 1%
 Main Board _ Dynamic

C52
NC
BIAS1

2
C53 VCC_OP_3V3
68P

R67 D1
R59 10K R61 10K 10K
AUDIO_OUT_R C51
IN4148
475P

1
AUDIO_OUT_R C60
R60 10K 475P
BIAS1
R63
100K
R74 22K
VCC_OP_3V3

1
R73 22K

OUT_A

OUT_A
+IN_A

+IN_A
-IN_A

-IN_A
V-

V-
R65
510K
C113 106P U7
U5 C58 C54
C61 C63 C116
C55 C115
475P R66 TP2412 475P 104P 102P
TP2412 475P 104P 102P
0R
R75 15K

OUT_B

OUT_B
+IN_B

+IN_B
A
-IN_B
C114

-IN_B
104P

V+

V+
C59 C117 47P
106P R64
1M
5

8
C74 NC

VCC_OP_3V3
VCC_OP_3V3
R70 30K
BT_R-
R14 C72
IN4148 NC/3K 475P

2 1
R71 30K R72 15K
BT_R+ C73 C118 AUDIO_OUT_R
475P 475P
R76
D2 C76 0R

C75 NC 47P

R62 10K
BIAS1 C17 R77
102P NC

VCC_SLG4V4826
5V_DET_SL TP14

A R52
10K

R187
10k C50
R42 C49
104P
10R 106P

CONTROL_14V R49 Q8

14

13
10K
2N3904
R44 TP12

GPIO

GPIO
10K
C161 R189
100K
104P POWER_KEY 1 12 REST
VDD GPIO

2 11 VREG_EN
TP11
GPI GPIO

DC_BIAS
R46 2K
3 10 TP13
GPIO GPIO

R149 4R7
VCC_OP_3V3 POWER_ON_OFF
R47 1K
4 9
VCC_AUDIO_3V3 GPIO GPIO POWER_ON

R48 1K 5 8
POWER_OFF_READY GPIO GND
R68

GPIO

GPIO
1K U4
TP15
SLG4V4826
BIAS1

7
R58 R57
R54 0R R53 10K
NC NC
R69
C70
1K C69
104P
475P

R55
3.9K
A

R56
13K

VCC_OP_3V3
Main Board _ DC DC LDO

R144 10K

R92 R146 R40 R41

0.1R
10K 18K 1.1K

C40
102P

VCC_SWITCH
+3.5V
1 6
FB EN
C126 C127
106P 104P
R90 R85
2 5 L3
0R 2.2R
IN LX
1.5uH
3 4 SYS_3V5
D5 1 2 GND OUT
FB5
NC 1K@100M
C131
105P
D7 1 2 U14 C128 C129 C142 C143

NC C130 106P 104P 106P 104P

220uF/10V

+3.5V

! IN5819
BAT_DET 2 1

U12 D3
LP3984H-33B5F

+3.5V 1 5 SYS_3V3
VIN VOUT BAT
S D D S
2 C141
Q11
R148
GND C140
103P Q10
C136 10K 104P

104P
C137
ME2345A ME2345A

G
103P
3 4 C146
R178
CE NC 104P
100k C16
D4
105P IN5819
R182 10R
USB_5V VCC_SWITCH

R181
4.7k

U11 C154
C156
105P
104P
LP3984H-33B5F

+3.5V 1 5 VCC_AUDIO_3V3
VIN VOUT
2N3904
2 C134 C135 POWER_ON
R179 47k Q3
GND 104P 103P
C132 C133

104P 103P

BOOST_EN R147 3 4 R180

10K CE NC
C148 100k
104P

U8
LP3984H-33B5F

BAT 1 5 VCC_SLG4V4826
VIN VOUT
2 C125
R143
GND C124
103P
C122 C123 10K 104P
104P 103P

3 4
CE NC
Main PCB_TOP LAYOUT
Main PCB_BOTTOM LAYOUT

．
KEY PCB _ TOP LAYOUT

KEY PCB _ BOTTOM LAYOUT

⑨m
GN D
LED PCB _ TOP LAYOUT

LED PCB _ BOTTOM LAYOUT

。
USB PCB _ TOP LAYOUT USB PCB _ BOTTOM LAYOUT

TP3
 Pos. No. Part Number Description
1+2 1003047565B0020 PASSIVE RADIATOR R YEL FLIP5 CS
MECHANICAL EXPLODED VIEW 1+2 1003047565B0019 PASSIVE RADIATOR R PINK FLIP5 CS
1+2 1003047565B0018 PASSIVE RADIATOR R TEAL FLIP5 CS
1+2 1003047565B0017 PASSIVE RADIATOR R SAND FLIP5 CS
1+2 1003047565B0016 PASSIVE RADIATOR R WHT FLIP5 CS
1+2 1003047565B0015 PASSIVE RADIATOR R GREN FLIP5 CS
1+2 1003047565B0014 PASSIVE RADIATOR R GRY FLIP5 CS
1+2 1003047565B0013 PASSIVE RADIATOR R BLU FLIP5 CS
1+2 1003047565B0012 PASSIVE RADIATOR R RED FLIP5 CS
1+2 1003047565B0011 PASSIVE RADIATOR R BLK FLIP5 CS
3 300799000173 PR BRACKET SEALING RING CS
4 200606230003C00 MAIN PCBA FLIP5 CS
5 311400756502D00 MAIN HOUSING FLIP5 CS
6 300799000175 DRIVER SEALING RING CS
7 33072448003001C SPEAKER DRIVER FLIP5 CS
8+9+10+11 1003047565B0001 FABRIC GRILLE ASSY BLK FLIP5 CS
8+9+10+11 1003047565B0002 FABRIC GRILLE ASSY RED FLIP5 CS
8+9+10+11 1003047565B0003 FABRIC GRILLE ASSY BLU FLIP5 CS
8+9+10+11 1003047565B0004 FABRIC GRILLE ASSY GRAY FLIP5 CS
8+9+10+11 1003047565B0005 FABRIC GRILLE ASSY GREN FLIP5 CS
8+9+10+11 1003047565B0006 FABRIC GRILLE ASSY WHT FLIP5 CS
8+9+10+11 1003047565B0007 FABRIC GRILLE ASSY SAND FLIP5 CS
8+9+10+11 1003047565B0008 FABRIC GRILLE ASSY TEAL FLIP5 CS
8+9+10+11 1003047565B0009 FABRIC GRILLE ASSY PINK FLIP5 CS
8+9+10+11 1003047565B0010 FABRIC GRILLE ASSY YEL FLIP5 CS
12 200607220012C00 KEY PCBA FLIP5 CS
13 300799000176E00 VOLUME BUTTON FLIP5 CS
14+2 1003047565B0021 PASSIVE RADIATOR L BLK FLIP5 CS
14+2 1003047565B0022 PASSIVE RADIATOR L RED FLIP5 CS
14+2 1003047565B0023 PASSIVE RADIATOR L BLU FLIP5 CS
14+2 1003047565B0024 PASSIVE RADIATOR L GRY FLIP5 CS
14+2 1003047565B0025 PASSIVE RADIATOR L GREN FLIP5 CS
14+2 1003047565B0026 PASSIVE RADIATOR L WHT FLIP5 CS
14+2 1003047565B0027 PASSIVE RADIATOR L SAND FLIP5 CS
14+2 1003047565B0028 PASSIVE RADIATOR L TEAL FLIP5 CS
14+2 1003047565B0029 PASSIVE RADIATOR L PINK FLIP5 CS
14+2 1003047565B0030 PASSIVE RADIATOR L YEL FLIP5 CS
15 200609220007C00 LED AND KEY PCBA FLIP5 CS
16 200608220013C00 USB PCBA FLIP5 CS
17 300799000174E01 RUBBER BUTTON FLIP5 CS
18 309999000022C00 ASTIGMATIC PAPAER FLIP5 CS
19 311600756502D00 USB BRACKET FLIP5 CS
20 311700756501D00 PIPE LINE FLIP5 CS
21 319905756501D00 WRAPPING HOUSING BLK FLIP5 CS
21 319905756502D00 WRAPPING HOUSING RED FLIP5 CS
21 319905756503D00 WRAPPING HOUSING BLU FLIP5 CS
21 319905756504D00 WRAPPING HOUSING GRY FLIP5 CS
21 319905756505D00 WRAPPING HOUSING GREN FLIP5 CS
21 319905756506D00 WRAPPING HOUSING WHT FLIP5 CS
21 319905756507D00 WRAPPING HOUSING SAND FLIP5 CS
21 319905756508D00 WRAPPING HOUSING TEAL FLIP5 CS
21 319905756509D00 WRAPPING HOUSING PINK FLIP5 CS
21 319905756510D00 WRAPPING HOUSING YEL FLIP5 CS
22 300399020079D00 STRAP HOOK BLK FLIP5 CS
22 300399020080D00 STRAP HOOK RED FLIP5 CS
22 300399020081D00 STRAP HOOK BLU FLIP5 CS
22 300399020083D00 STRAP HOOK GREN FLIP5 CS
22 300399020085D00 STRAP HOOK WHT FLIP5 CS
22 300399020086D00 STRAP HOOK SAND FLIP5 CS
22 300399020087D00 STRAP HOOK TEAL FLIP5 CS
22 300399020088D00 STRAP HOOK PINK FLIP5 CS
22 300399020089D00 STRAP HOOK YEL FLIP5 CS
23 311500756510D00 DECORATIVE COVER YEL FLIP5 CS
23 311500756509D00 DECORATIVE COVER PINK FLIP5 CS
23 311500756508D00 DECORATIVE COVER TEAL FLIP5 CS
23 311500756507D00 DECORATIVE COVER SAND FLIP5 CS
23 311500756506D00 DECORATIVE COVER WHT FLIP5 CS
23 311500756505D00 DECORATIVE COVER GREN FLIP5 CS
23 311500756504D00 DECORATIVE COVER GRY FLIP5 CS
23 311500756503D00 DECORATIVE COVER BLU FLIP5 CS
23 311500756502D00 DECORATIVE COVER RED FLIP5 CS
23 311500756501D00 DECORATIVE COVER BLK FLIP5 CS
24 300112024010C00 LI-ION BATTERY 4800MAH FLIP5 CS
JBL FLIP 5 CS SPARE PARTS LIST V1.0

Pos. No. Part Number Description

1+2 1003047565B0020 PASSIVE RADIATOR R YEL FLIP5 CS
1+2 1003047565B0019 PASSIVE RADIATOR R PINK FLIP5 CS
1+2 1003047565B0018 PASSIVE RADIATOR R TEAL FLIP5 CS
1+2 1003047565B0017 PASSIVE RADIATOR R SAND FLIP5 CS
1+2 1003047565B0016 PASSIVE RADIATOR R WHT FLIP5 CS
1+2 1003047565B0015 PASSIVE RADIATOR R GREN FLIP5 CS
1+2 1003047565B0014 PASSIVE RADIATOR R GRY FLIP5 CS
1+2 1003047565B0013 PASSIVE RADIATOR R BLU FLIP5 CS
1+2 1003047565B0012 PASSIVE RADIATOR R RED FLIP5 CS
1+2 1003047565B0011 PASSIVE RADIATOR R BLK FLIP5 CS
3 300799000173 PR BRACKET SEALING RING CS
4 200606230003C00 MAIN PCBA FLIP5 CS
5 311400756502D00 MAIN HOUSING FLIP5 CS
6 300799000175 DRIVER SEALING RING CS
7 33072448003001C SPEAKER DRIVER FLIP5 CS
8+9+10+11 1003047565B0001 FABRIC GRILLE ASSY BLK FLIP5 CS
8+9+10+11 1003047565B0002 FABRIC GRILLE ASSY RED FLIP5 CS
8+9+10+11 1003047565B0003 FABRIC GRILLE ASSY BLU FLIP5 CS
8+9+10+11 1003047565B0004 FABRIC GRILLE ASSY GRAY FLIP5 CS
8+9+10+11 1003047565B0005 FABRIC GRILLE ASSY GREN FLIP5 CS
8+9+10+11 1003047565B0006 FABRIC GRILLE ASSY WHT FLIP5 CS
8+9+10+11 1003047565B0007 FABRIC GRILLE ASSY SAND FLIP5 CS
8+9+10+11 1003047565B0008 FABRIC GRILLE ASSY TEAL FLIP5 CS
8+9+10+11 1003047565B0009 FABRIC GRILLE ASSY PINK FLIP5 CS
8+9+10+11 1003047565B0010 FABRIC GRILLE ASSY YEL FLIP5 CS
12 200607220012C00 KEY PCBA FLIP5 CS
13 300799000176E00 VOLUME BUTTON FLIP5 CS
14+2 1003047565B0021 PASSIVE RADIATOR L BLK FLIP5 CS
14+2 1003047565B0022 PASSIVE RADIATOR L RED FLIP5 CS
14+2 1003047565B0023 PASSIVE RADIATOR L BLU FLIP5 CS
14+2 1003047565B0024 PASSIVE RADIATOR L GRY FLIP5 CS
14+2 1003047565B0025 PASSIVE RADIATOR L GREN FLIP5 CS
14+2 1003047565B0026 PASSIVE RADIATOR L WHT FLIP5 CS
14+2 1003047565B0027 PASSIVE RADIATOR L SAND FLIP5 CS
14+2 1003047565B0028 PASSIVE RADIATOR L TEAL FLIP5 CS
14+2 1003047565B0029 PASSIVE RADIATOR L PINK FLIP5 CS
14+2 1003047565B0030 PASSIVE RADIATOR L YEL FLIP5 CS
15 200609220007C00 LED AND KEY PCBA FLIP5 CS
16 200608220013C00 USB PCBA FLIP5 CS
17 300799000174E01 RUBBER BUTTON FLIP5 CS
18 309999000022C00 ASTIGMATIC PAPAER FLIP5 CS
19 311600756502D00 USB BRACKET FLIP5 CS
20 311700756501D00 PIPE LINE FLIP5 CS
21 319905756501D00 WRAPPING HOUSING BLK FLIP5 CS
21 319905756502D00 WRAPPING HOUSING RED FLIP5 CS
21 319905756503D00 WRAPPING HOUSING BLU FLIP5 CS
21 319905756504D00 WRAPPING HOUSING GRY FLIP5 CS
21 319905756505D00 WRAPPING HOUSING GREN FLIP5 CS
21 319905756506D00 WRAPPING HOUSING WHT FLIP5 CS
21 319905756507D00 WRAPPING HOUSING SAND FLIP5 CS
21 319905756508D00 WRAPPING HOUSING TEAL FLIP5 CS
21 319905756509D00 WRAPPING HOUSING PINK FLIP5 CS
21 319905756510D00 WRAPPING HOUSING YEL FLIP5 CS
22 300399020079D00 STRAP HOOK BLK FLIP5 CS
22 300399020080D00 STRAP HOOK RED FLIP5 CS
22 300399020081D00 STRAP HOOK BLU FLIP5 CS
22 300399020083D00 STRAP HOOK GREN FLIP5 CS
22 300399020085D00 STRAP HOOK WHT FLIP5 CS
22 300399020086D00 STRAP HOOK SAND FLIP5 CS
22 300399020087D00 STRAP HOOK TEAL FLIP5 CS
22 300399020088D00 STRAP HOOK PINK FLIP5 CS
22 300399020089D00 STRAP HOOK YEL FLIP5 CS
23 311500756510D00 DECORATIVE COVER YEL FLIP5 CS
23 311500756509D00 DECORATIVE COVER PINK FLIP5 CS
23 311500756508D00 DECORATIVE COVER TEAL FLIP5 CS
23 311500756507D00 DECORATIVE COVER SAND FLIP5 CS
23 311500756506D00 DECORATIVE COVER WHT FLIP5 CS
23 311500756505D00 DECORATIVE COVER GREN FLIP5 CS
23 311500756504D00 DECORATIVE COVER GRY FLIP5 CS
23 311500756503D00 DECORATIVE COVER BLU FLIP5 CS
23 311500756502D00 DECORATIVE COVER RED FLIP5 CS
23 311500756501D00 DECORATIVE COVER BLK FLIP5 CS
24 300112024010C00 LI-ION BATTERY 4800MAH FLIP5 CS
30080535004002D00 USB TYPE-C CABLE FLIP5 CS
309908000076D00 STRAP YEL FLIP5 CS
309908000075D00 STRAP PINK FLIP5 CS
309908000074D00 STRAP TEAL FLIP5 CS
309908000073D00 STRAP SAND FLIP5 CS
309908000072D00 STRAP WHT FLIP5 CS
309908000071D00 STRAP GREN FLIP5 CS
309908000070D00 STRAP GRY FLIP5 CS
309908000069D00 STRAP BLU FLIP5 CS
309908000068D00 STRAP RED FLIP5 CS
309908000067D00 STRAP BLK FLIP5 CS
300401990043D00 EPP CASE FLIP5 CS
300403110282D00 GIFT BOX US BLK FLIP5 CS
300403110283D00 GIFT BOX US RED FLIP5 CS
300403110284D00 GIFT BOX US BLU FLIP5 CS
300403110285D00 GIFT BOX US GRY FLIP5 CS
300403110286D00 GIFT BOX US GREN FLIP5 CS
300403110287D00 GIFT BOX US WHT FLIP5 CS
300403110288D00 GIFT BOX US SAND FLIP5 CS
300403110289D00 GIFT BOX US TEAL FLIP5 CS
300403110290D00 GIFT BOX US PINK FLIP5 CS
300403110291D00 GIFT BOX US YEL FLIP5 CS
300403110263D00 GIFT BOX GLOBAL BLK FLIP5 CS
300403110264D00 GIFT BOX GLOBAL RED FLIP5 CS
300403110265D00 GIFT BOX GLOBAL BLU FLIP5 CS
300403110266D00 GIFT BOX GLOBAL GRY FLIP5 CS
300403110267D00 GIFT BOX GLOBAL GREN FLIP5 CS
300403110268D00 GIFT BOX GLOBAL WHT FLIP5 CS
300403110269D00 GIFT BOX GLOBAL SAND FLIP5 CS
300403110270D00 GIFT BOX GLOBAL TEAL FLIP5 CS
300403110271D00 GIFT BOX GLOBAL PINK FLIP5 CS
300403110272D00 GIFT BOX GLOBAL YEL FLIP5 CS
Revision List

Version 1.0

* Initial release for JBL Flip 5. 2019-4