Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 50 views

    12 in CL300 Alba Mill Certf

    Uploaded by

    Irsyad Rosyidi
    This document certifies that Alba Gaskets Ltd. produced and tested 7 R57 (12-inch) rapid integrity gaskets. The gaskets and materials meet specifications for pressure class 300LB service and conform to drawings and PO 121023. Material certificates show the gaskets met chemical and mechanical property requirements. Hydraulic testing of the gaskets at ambient temperature up to 10,000 PSI for 15 minutes found no leaks or pressure drops, passing the tests. The gaskets are certified to have been produced under a quality management system meeting ISO 9001:2015 standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    12 in CL300 Alba Mill Certf

    Uploaded by

    Irsyad Rosyidi
    50 views4 pages
    This document certifies that Alba Gaskets Ltd. produced and tested 7 R57 (12-inch) rapid integrity gaskets. The gaskets and materials meet specifications for pressure class 300LB service and conform to drawings and PO 121023. Material certificates show the gaskets met chemical and mechanical property requirements. Hydraulic testing of the gaskets at ambient temperature up to 10,000 PSI for 15 minutes found no leaks or pressure drops, passing the tests. The gaskets are certified to have been produced under a quality management system meeting ISO 9001:2015 standards.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document certifies that Alba Gaskets Ltd. produced and tested 7 R57 (12-inch) rapid integrity gaskets. The gaskets and materials meet specifications for pressure class 300LB service and conform to drawings and PO 121023. Material certificates show the gaskets met chemical and mechanical property requirements. Hydraulic testing of the gaskets at ambient temperature up to 10,000 PSI for 15 minutes found no leaks or pressure drops, passing the tests. The gaskets are certified to have been produced under a quality management system meeting ISO 9001:2015 standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    50 views4 pages

    12 in CL300 Alba Mill Certf

    Uploaded by

    Irsyad Rosyidi
    This document certifies that Alba Gaskets Ltd. produced and tested 7 R57 (12-inch) rapid integrity gaskets. The gaskets and materials meet specifications for pressure class 300LB service and conform to drawings and PO 121023. Material certificates show the gaskets met chemical and mechanical property requirements. Hydraulic testing of the gaskets at ambient temperature up to 10,000 PSI for 15 minutes found no leaks or pressure drops, passing the tests. The gaskets are certified to have been produced under a quality management system meeting ISO 9001:2015 standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    CERTIFICATE OF CONFORMANCE

    Block 1, Units 10 and 11


    Souterhead Industrial Estate, Altens
    Aberdeen, United Kingdom AB12 3LF
    T: 01224 249414 E: sales@albagaskets.co.uk
    www.albagaskets.com

    Part: RIGROC12021 Description: R57 (12”) Alba Rapid Integrity Gasket


    Type: RTJ PO Number : 121023 Item Number: 1
    Rating: Pressure class: 300LB SO Number : 91030 Item Quantity : 7
    Country of Origin: SCOTLAND, UK Customer: PT.Maju Teknik Sejahtera

    Material Traceability and conformity


    Components Material Certificate Heat No. Hardness
    Gasket 316 91030-1B 23A-10A078 65-68 HRBW
    Hydraulic Test Report ASTM E1003-13 (2018)
    Test Date: 16/10/2023 Tested by: Lewis Dickson
    Temperature: Ambient 8 C
    Pressure: 5,000 PSI, hold 30 sec ramp to 10,000 psi and hold
    Test time: Hold full pressure for 15 minutes
    Leak Test result: Pass - No leaks observed
    Pressure Test result: Pass – No pressure drop
    Visual Inspection: Pass – No defects

    Certificate of Conformity Din 50.049 / BSEN 10204 / 3.1


    We hereby certify that all the components detailed above have been inspected and conform in
    all respects to drawings and specifications as ordered.

    Alba Rapid Integrity Gaskets must be fitted by trained personnel. Refer to Installation and
    Assembly Procedure
    Alba Rapid Integrity Gaskets are designed for gas or hydraulic pressure testing
    Over pressure protection (Regulator or Pressure Relief Valve) must be used while conducting
    testing
    Alba Gaskets recommends periodic visual inspection on each Rapid Integrity Gasket to
    ensure the test port and gasket have no damage, no leak or concern regarding joint integrity

    Further tests, including leak detection or retesting of Rapid Integrity Gasket can be done
    as/when required.

    Authorised Signatory

    For & On Behalf of Alba Gaskets Ltd.

    Registered in Scotland no. SC324543


    Registered office: Suite 6, Braehead Shopping Centre, Aberdeen AB22 8RR
    Directors: A. Smith, B. Smith, G. Sim
    VAT no. 911 5036 63 OHS621780 EMS621779 FS 544395 FPAL No: 10050983
    Block 1, Units 10 and 11
    Souterhead Industrial Estate, Altens
    Aberdeen, United Kingdom AB12 3LF
    T: 01224 249414 E: sales@albagaskets.co.uk
    www.albagaskets.com

    Material Certificate Din 50.049 / BS.EN.10204 / 3.1


    Date : 16/10/2023 Incoming Cert : 19878
    Material Grade : S316 Certificate No : 91030-1B
    Cast No : 23A-10A078 Customer : PT.Maju Teknik Sejahtera

    PO Number : 121023 SO Number : 91030


    Item Number : 1 Item Quantity : 7
    Item Description : R57 Octagonal RTJ RING GASKET

    Heat Analysis

    Chemical %C %Mn %Si %P %Cr %Ni %Mo %Ti %Cu


    0.054 1.07 0.42 0.022 16.58 10.47 2.20
    Chemical %Al %Fe %N %Cb %V %Sn %Co %B %Mg
    0.056
    Chemical %Nb %Ca %W %CC %S
    0.015

    Mechanical Test Results

    Probe No : 0.2% Proof / Tensile Elongation Hardness


    Yield Stress Strength % Value
    335 MPA 547 MPA 46 65-68 HRBW

    The Chemical & Mechanical Properties of the Materials Supplied / Manufactured are in full Compliance with the
    Nace Specification MR-01-75 (Latest Edition)

    We Hereby Certify that the Item(s) have been Inspected & Complies with the Terms & Conditions of the Order
    Contract.
    Above item(s) have been produced using a Quality Management System certified by BSI Management Systems
    as meeting the requirements of the international standard ISO 9001: 2015 Certificate number FS 544395

    Authorised Signatory

    For & On Behalf Of Alba Gaskets Ltd.

    Registered in Scotland no. SC324543


    Registered office: Suite 6, Braehead Shopping Centre, Aberdeen AB22 8RR
    Directors: A. Smith, B. Smith, G. Sim
    VAT no. 911 5036 63 OHS621780 EMS621779 FS 544395 FPAL No: 10050983
    CERTIFICATE OF CONFORMANCE
    Block 1, Units 10 and 11
    Souterhead Industrial Estate, Altens
    Aberdeen, United Kingdom AB12 3LF
    T: 01224 249414 E: sales@albagaskets.co.uk
    www.albagaskets.com

    Part: RIGROC12021 Description: R57 (12”) Alba Rapid Integrity Gasket


    Type: RTJ PO Number : 121023 Item Number: 1
    Rating: Pressure class: 300LB SO Number : 91030 Item Quantity : 3
    Country of Origin: SCOTLAND, UK Customer: PT.Maju Teknik Sejahtera

    Material Traceability and conformity


    Components Material Certificate Heat No. Hardness
    Gasket 316 91030-1A 1878-701 74-75 HRB
    Hydraulic Test Report ASTM E1003-13 (2018)
    Test Date: 16/10/2023 Tested by: Lewis Dickson
    Temperature: Ambient 8 C
    Pressure: 5,000 PSI, hold 30 sec ramp to 10,000 psi and hold
    Test time: Hold full pressure for 15 minutes
    Leak Test result: Pass - No leaks observed
    Pressure Test result: Pass – No pressure drop
    Visual Inspection: Pass – No defects

    Certificate of Conformity Din 50.049 / BSEN 10204 / 3.1


    We hereby certify that all the components detailed above have been inspected and conform in
    all respects to drawings and specifications as ordered.

    Alba Rapid Integrity Gaskets must be fitted by trained personnel. Refer to Installation and
    Assembly Procedure
    Alba Rapid Integrity Gaskets are designed for gas or hydraulic pressure testing
    Over pressure protection (Regulator or Pressure Relief Valve) must be used while conducting
    testing
    Alba Gaskets recommends periodic visual inspection on each Rapid Integrity Gasket to
    ensure the test port and gasket have no damage, no leak or concern regarding joint integrity

    Further tests, including leak detection or retesting of Rapid Integrity Gasket can be done
    as/when required.

    Authorised Signatory

    For & On Behalf of Alba Gaskets Ltd.

    Registered in Scotland no. SC324543


    Registered office: Suite 6, Braehead Shopping Centre, Aberdeen AB22 8RR
    Directors: A. Smith, B. Smith, G. Sim
    VAT no. 911 5036 63 OHS621780 EMS621779 FS 544395 FPAL No: 10050983
    Block 1, Units 10 and 11
    Souterhead Industrial Estate, Altens
    Aberdeen, United Kingdom AB12 3LF
    T: 01224 249414 E: sales@albagaskets.co.uk
    www.albagaskets.com

    Material Certificate Din 50.049 / BS.EN.10204 / 3.1


    Date : 16/10/2023 Incoming Cert : 20091
    Material Grade : S316 Certificate No : 91030-1A
    Cast No : 1878-701 Customer : PT.Maju Teknik Sejahtera

    PO Number : 121023 SO Number : 91030


    Item Number : 1 Item Quantity : 3
    Item Description : R57 Octagonal RTJ RING GASKET

    Heat Analysis

    Chemical %C %Mn %Si %P %Cr %Ni %Mo %Ti %Cu


    0.0410 1.0050 0.5640 0.0350 16.6820 10.6780 2.2030
    Chemical %Al %Fe %N %Cb %V %Sn %Co %B %Mg

    Chemical %Nb %Ca %W %CC %S


    0.0015

    Mechanical Test Results

    Probe No : 0.2% Proof / Tensile Elongation Hardness


    Yield Stress Strength % Value
    214 MPA 525 MPA 45 74-75 HRB

    The Chemical & Mechanical Properties of the Materials Supplied / Manufactured are in full Compliance with the
    Nace Specification MR-01-75 (Latest Edition)

    We Hereby Certify that the Item(s) have been Inspected & Complies with the Terms & Conditions of the Order
    Contract.
    Above item(s) have been produced using a Quality Management System certified by BSI Management Systems
    as meeting the requirements of the international standard ISO 9001: 2015 Certificate number FS 544395

    Authorised Signatory

    For & On Behalf Of Alba Gaskets Ltd.

    Registered in Scotland no. SC324543


    Registered office: Suite 6, Braehead Shopping Centre, Aberdeen AB22 8RR
    Directors: A. Smith, B. Smith, G. Sim
    VAT no. 911 5036 63 OHS621780 EMS621779 FS 544395 FPAL No: 10050983

    You might also like