NOTES:

1. ALL DIMENSIONS ARE IN MILLIMETRES UNLESS OTHERWISE

STATED.
2. STRAINER POSTS TO BE PROVIDED AT CHANGES OF
DIRECTION AND AT ACUTE VARIATIONS OF LEVEL.
3. ALL GALVANISED POSTS, EXTENSION ARMS, FRAMING AND
BRACING MEMBERS SHALL BE POWDER COATED
PHOSPHATE COAT).
C GATE POST C GATE POST 4. GATE FRAMES AND DIAGONAL BRACING TO BE DRILLED
114 DIA CHS 114 DIA CHS THROUGH AT N.M.T. 450 CENTRES FOR ATTACHING MESH WITH
2000 MAX. TO INTERMEDIATE POST ROAD WIDTH + 900 = VEHICLE GATE POST CENTRES 2000 MAX. TO INTERMEDIATE POST 2.3/3.2 DIA STIRRUP WIRE
VEHICLE GATE POST CENTRES - 254 = GATE LEAVES
LEGEND:
GATE LEAF GATE LEAF
REINFORCED CEMENT CONCRETE
20 GAP
SOIL
EGL - EXISTING GROUND LEVEL
FGL - FINISHED GROUND LEVEL
FRL - FINISHED ROAD LEVEL
3 DIA PVC COATED CHAINLINK CHS - CIRCULAR HOLLOW SECTION
FENCING 50 x 50 MESH FIXED
TO FRAME AND DIAGONALS RHS - RECTANGULAR HOLLOW SECTION

150
WITH STIRRUP WIRE THROUGH DIAGONAL BRACINGS PVC - POLYVINYL CHLORIDE
HOLES (TYP.) 60 DIA CHS (TYP.)
BRACING 63 DIA - DIAMETER
20 DIA HINGE PIN (TYP.) WITH 5 DIA HOLES

2000 (TYP.)
DIA CHS (TYP.) TYP - TYPICAL
25 DIA HEAT PROTECTED FOR STIRRUP WIRE

op V1
3 No HINGES / LEAF STAINLESS STEEL
U HANDLES TO BOTH SIDE
HINGE PLATE
16 THK (TYP.) OF EACH GATE LEAF (TYP.) SECURITY BOLT (TYP.)
TURNBUCKLE (TYP.)
DROP BOLT STOP (TYP.) DROP BOLT (TYP.)
GATE FRAMES 80 DIA CHS (TYP.)
WITH 5 DIA HOLES FOR STIRRUP WIRE

EGL

C -
FRL ( FGL )

y
C
250
(THIS DIMENSION MAY VARY SLAM PLATE (SHOWN UP)
100

TO SUIT ROAD LONGITUDINAL FLUSH KERBS TO BE

GRADIENT OR OTHER SITE CONCRETE BASE USED AT GATES (TYP.)
CONDITIONS) FOR SLAM PLATE

C
6.0m MAINTENANCE ACCESS GATE

Q
nternation
tak I al
O ! 01213! "#$%
P.O.Box: 39192
&'()*+,
Abu Dhabi
C GATE POST C GATE POST $-$.$/
114 DIA CHS 114 DIA CHS U.A.E.
2000 MAX. TO INTERMEDIATE POST ROAD WIDTH + 900 = VEHICLE GATE POST CENTRES 2000 MAX. TO INTERMEDIATE POST

VEHICLE GATE POST CENTRES - 254 = GATE LEAVES

GATE LEAF
25 DIA HEAT
PROTECTED
STAINLESS STEEL
5cm x 3cm
REFERENCE DRAWINGS AND DOCUMENTS
U HANDLES TO BOTH
SIDE OF EACH GATE
LEAF (TYP.) 3 DIA PVC COATED CHAINLINK
FENCING 50x50 MESH FIXED TO
3 DIA PVC COATED CHAINLINK FRAME AND DIAGONALS WITH
FENCING 50 x 50 MESH FIXED STIRRUP WIRE THROUGH HOLES
TO FRAME AND DIAGONALS (TYP.)
150

WITH STIRRUP WIRE THROUGH

HOLES (TYP.) 25 DIA HEAT PROTECTED STAINLESS
BRACING 63 STEEL U HANDLES TO BOTH SIDE OF
DIA CHS (TYP.) 20 DIA HINGE PIN (TYP.) 2000 (TYP.) EACH GATE LEAF (TYP.)
3 No HINGES / LEAF REFER TO DETAIL IN
SECURITY BOLT (TYP.)
SHEET No. 111
HINGE PLATE DROP BOLT STOP (TYP.)
16 THK (TYP.) SECURITY BOLT (TYP.)
TURNBUCKLE (TYP.)
DROP BOLT (TYP.)
GATE FRAMES 80 DIA CHS (TYP.) (THIS DIMENSION MAY VARY TO
WITH 5 DIA HOLES FOR STIRRUP WIRE SUIT ROAD LONGITUDINAL No. REVISIONS APP'D DATE
GRADIENT OR OTHER SITE
EGL CONDITIONS)
CLIENT
FRL ( FGL ) FRL
250

(THIS DIMENSION MAY SLAM PLATE

100

100
VARY TO SUIT ROAD (SHOWN UP)
LONGITUDINAL GRADIENT TITLE

900
OR OTHER SITE CONDITIONS) STANDARD DRAWINGS
FLUSH KERBS TO BE CONCRETE BASE IRRIGATION WORKS
USED AT GATES (TYP.) FOR SLAM PLATE
DRAWING TITLE
STANDARD DRAWING
500 SQ. 500 SQ.
3.0m MAINTENANCE ACCESS GATE
( TYP. ) ( TYP. ) FENCING AND SECURITY WORKS
PEDESTRIAN GATE GATE FOR SITE FENCING DETAIL
(SHEET 1 OF 2)
DRAWN - SCALE 1 : 20 @ A1
CHECKED - DATE -
APPROVED - SIZE A1
PROJECT DWG.
No. - No. 117

117 IRR-STD-117-00.dwg Layout1 Plot : Jan 30, 2017 - 8:24am p0090252