RO+DM+MB PLANT 1000 LPH

KELVIN WATER TECHNOLOGIES PVT. LTD.

PLOT NO 81, SECTOR 5, IMT MANESAR,
HSIIDC, GURUGRAM, HARYANA-122051
MOBILE: +91-9812241001, 9812646262
Email: kelvinwatercare@gmail.com, info@kelvinindia.in
Website: www.kelvinindia.in, www.stpetp.com

Ref No- KWTPL/TSIPL/22-23/220720-03

Date- 22/08/2022

To the kind Attention of-: MR. LALIT SAPARIA

Organization Name-: TECHNIQUE SURFACES INDIA PVT. LTD.
Address-: SEC. 08, IMT MANESAR, GURGAON
Contact No.-: +91-8975427500
Email id-: saparia@hefgroupindia.in

SUB: OFFER FOR RO+DM+MB PLANT 1000 LPH

Water is the most essential element for the life as life without water is impossible. But it
is a fact that water available is not always fit for use. Water for each application must be
tested & treated as per the application requirement before use. The neglect of water
quality can affect the health of your people & machinery. Bad processed water can
considerably reduce the life of your costly equipment like Boilers, Economizers,
Condensers, radiators etc. Similarly, the bad quality drinking water can cause deadly
diseases like jaundice, Cholera & gastroenteritis.

ABOUT THE COMPANY

Our organization Kelvin Water Technologies Pvt. Ltd. is committed to provide
complete solution to water and wastewater related problems of our customers. We have
sufficient experienced staff to give individual attention to each customer. We are
manufacturers & Suppliers of commercial & industrial water and wastewater treatment
equipment & plants. We are one of the leading service providers in the field of water and
wastewater treatment/Purification.

Kelvin Company works closely with industries to treat the input water to the desired
quality for different processes. Improved quality of processed water helps industries in
improving their product as well as lowering operation costs.
 RO+DM+MB PLANT 1000 LPH
Kelvin Company supplies water and wastewater treatment systems to treat raw water
having various kinds of impurities. These have been installed in different process
industries including companies, hostels, hotels, hospitals, schools and colleges etc.
This refers to your requirement of water treatment plant; we take pleasure in submitting
our offer to meet your requirement based on assumed water analysis with output of 1000

We hope you will find our proposal in line with your requirement. In case you desire any
clarification, please contact the undersigned.

Thanking you and assuring you our best services always.

Yours Sincerely,
Aryan Dinesh
+91-9812241001
For Kelvin Water Technologies Pvt. Ltd.

Prepared by
Ajeet Kumar
Proposal Engineer
+91-9466752200

ANNEXURES

ANNEXURE-I TECHNICAL SUMMERY OF RO+DM+MB

ANNEXURE-II SALIENT FEATURES OF REVERSE OSMOSIS SYSTEM
ANNEXURE-III BASIS OF DESIGN AND TREATMENT SCHEME
ANNEXURE-IV LIST OF PARTS OF THE SYSTEM
ANNEXURE-V TECHNICAL SPECIFICATION OF SYSTEM
ANNEXURE-VI SCOPE OF SUPPLY
ANNEXURE-VII SCHEDULE OF EXCLUSION & CLIENT TO PROVIDE
ANNEXURE-VIII PRICE, COMMERCIAL TERMS & CONDITIONS
 RO+DM+MB PLANT 1000 LPH
ANNEXURE-I: TECHNO-COMMERCIAL SUMMERY FOR RO+DM+MB
PLANT 1000 LPH

• SEMI-AUTOMATIC RO+DM unit having water at the flow rate of 1000 LPH having
Output of less than 20µ followed by MB PLANT of TDS: 0-5 ppm, Conductivity > 1
μS/cm at a pH value 6.0-7.5

PRICE: Price for the above system is as follows:

• RO+DM+MB PLANT 1000 LPH: Rs. 3,65,000/-

INSTALLATION AND COMMISSIONING CHARGES: RS. 15,000/-

PRICE BASE: Transportation for site shall be charged extra.

TAXES: GST @ 18% shall be extra.

DELIVERY: Plant will be installed within 5 to 6 weeks from date of receipt of

your order along with advance payment.

INSTALLATION: Plant will be installed by our engineer at your site. However, you
will get all connection ready as stated above prior to calling us
engineer for Installation.

PAYMENT: 50% Advance along with order and balance 50% before dispatching
of material. Installation charges shall be paid within 1 week of
installation.

WARRANTY: One year against manufacturing defects. Plant is designed for

successful running for a long run. No warranty on membrane and
consumable items (filters, chemicals and all other consumables parts).
We are responsible for any manufacturing defects and technical
defects in plant. But if defect is due to customer behalf, then standard
charges will apply.

Note: - For complete details of the plant & scope of supply. Pl. refer annexures attached
here with this offer.
 RO+DM+MB PLANT 1000 LPH
ANNEXURE-II: SALIENT FEATURES OF RO+DM+MB SYSTEM

1. The Proposed water treatment based on R.O. technology is designed to produce

product water at the flow rate of 1000 LPH. as per below mentioned.

2. The proposed water treatment system is SEMI-AUTOMATIC system not the

conventional Manual system, which will be operated through control panel. The
control panel will give the continuous display of the flow for wastage water and
treated water. The proposed Water treatment system gets turned off when the raw
water tank goes empty, also it will automatically turn off when the treated water tank
gets filled.

3. MOC of pressure vessel for Dual Media Filter will be FRP.

4. Multi-port valve mechanism is provided for filter system instead of conventional

Three-valve mechanism to facilitate the smooth operation and less maintenance
requirement.

5. All interconnecting as well as frontal pipework for the entire system will be made
UPVC.

ANNEXURE-III: BASIS OF DESIGN AND TREATMENT SCHEME

1. PLANT INTRODUCTION:
The proposed water treatment plant based on Reverse Osmosis Technology is
designed to produce product water at the flow rate of 1000 LPH as per below
mentioned parameters.
2. RAW WATER ANALYSIS:
We have designed the proposed water treatment system based on assumed raw water
analysis:
Colors : True colors
Odor : Agreeable
pH value : 5.5
Total Dissolved Solids : 550
3. END WATER QUALITY: (AFTER RO+DM+MB SYSTEM)
TDS: 0-5 ppm, Conductivity > 1 µS/cm
4. R.O. PLANT OPERATING DATA:
Feed flow rate : 2000 LPH
Average recovery : 50% (Based on TDS)
 RO+DM+MB PLANT 1000 LPH
5. TREATMENT SCHEME:
• RAW WATER PUMP
It is Starting pump to feed raw water into plant.
• ANTI-SCALING DOSING
It is essential to dose anti-scaling chemical to remove scaling on the RO membrane
surface.
• MICRON CARTRIDGE FILTER
The water from the above unit shall be passed through a cartridge filter assembly with
cartridges of 5/10 microns nominal rating. This has been incorporated to carry on fine
filtration before subjecting the water to RO Membranes. This will avoid choking of
the membranes.

• HIGH PRESSURE PUMP

Since the RO plant works on higher pressures because of the osmotic pressures,
therefore, pumping it through a high-pressure pump first pressurizes the feed water to
RO.
• RO MODULES
The pressurized water from the high-pressure pump shall be fed to the RO Membranes
held in RO pressure tubes, wherein there will be a rejection of the dissolved solids and
permeate you will get will be with reduced dissolved solids.
• DM & MB Plants
DM (demineralized) water plants are systems used to carry out industrial water
treatment. To be more precise, the DM plant remove dissolved solids or minerals
from process streams and feed water. These plants remove minerals using any one of
the following procedures: Deionization. Distillation.
Mixed bed having consists of strong acid cation exchange and strong base anion
exchange resin.
The end water quality shall be achieved subject to:

1. Feed quality is same as specified in your inquiry. In case of any change in the quality
of raw water, the same many heavy implications on the Operating parameters and end
water quality of the system.
2. Feed limiting condition mentioned in our offer is strictly maintained.
3. Operation of water treatment plant is strictly followed in totality as per our
instruction.
 RO+DM+MB PLANT 1000 LPH
ANNEXURE-IV: LIST OF ALL PARTS OF RO+DM+MB PLANT

S.N. DESCRIPTION QUANTITY

1. High Pressure Pump 1 No.
2. RO Plant Feed Water Pump 1 No.
3. Dual Media Filter 1 No.
4. Carbon and Media 1 Lot.
5. Dosing Pump 1 No.
6. Chemical Dosing Tank 5 Nos.
7. Cartridge Housing 2 Nos.
8. Cartridge Filter 2 Nos.
9. Membrane Housing 8040 1 No.
10. RO Membrane 8040 1 No.
11. DM Water Feed Pump 1 No.
12. Vessel for Cation Filter 1 No.
13. Vessel for Anion Filter 1 No.
14. Cation Resin 1 Lot
15. Anion Resin 1 Lot
16. MB Feed Pump 1 No.
17. Vessel For MB Filter 1 No.
18. MB Resin 1 Lot
19. Rota Meter 5 Nos.
20. Multi-port Valve 4 Nos.
21. Pressure Gauge 3 Nos.
22. SS Skid 1 No.
23. Automatic Float 3 Nos.
24. Air Releaser Valve 2 Nos.
25. HPS & LPS Pressure Switch 2 Nos.
26. Control Panel 1 No.
27. Wire and Cable 1 Lot
28. Online Conductivity & TDS Meter 2 Nos.
29. Complete Pipes and Fittings 1 Lot
30. RO Raw Water Tank (Client’ Scope) 1 No.
31. RO Treated Water Tank (Client’s Scope) 1 No.
32.3
32. DM Treated Water Tank (Client’s Scope) 1 No.
2
33. MB Treated Water Tank (Client’s Scope) 1 No.
 RO+DM+MB PLANT 1000 LPH
ANNEXURE-VI: TECHNICAL SPECIFICATION OF SYSTEM

1. HIGH PRESSURE PUMP-1 No.

Location After Cartridge filter
Application To feed raw water into membranes with pressure
Type Vertical
Working flow 3 m³/ hour
Working Pressure 8-12 kg/ cm²
Phase Three phase
MOC SS
Make CRI/Shakti/Equivalent
Scope Kelvin

02. RAW WATER PUMP-1 No.

Location Starting pump of plant
Application To feed raw water into plant
Type Mono-block
Working flow 3 m³/ hour
Working Pressure 2-3 kg/ cm²
Phase Three phase
MOC CI
Make Crompton/Kirloskar/Equivalent
Scope Kelvin

03. DUAL MEDIA FILTER-1 No.

Location After raw water pump
Application To remove fine suspended solids
Type Vertical
Size Diameter 400 mm x Height 1625 mm
Working flow 3 m³/hour
Backwash duration 15-20 minutes daily
Filter Media Quartz sand with pebbles, gravels and activated carbon
MOC Fiber glass reinforced plastic (FRP)
Make Pentair/Starlite/Kai/Equivalent
Scope Kelvin

04. CARBON AND MEDIA-1 Lot

Location In DMF vessels
Application For removing and retaining dust, heavy particles, odor and color
Contents Quartz sand, Pebbles, gravels and Activated Carbon
Scope Kelvin
 RO+DM+MB PLANT 1000 LPH
05. ANTI-SCALANT DOSING PUMP-1 No.
Location Near control panel
Application To dose chemical for anti-scaling
Type Dosing
Pump discharge 0-10 LPH
Phase Single phase
MOC PP
Make UKL/Minidose/E-dose/KAI/Equivalent
Scope Kelvin

06. CHEMICAL DOSING TANK-5 No.

Location Nearby RO, DM & MB Plant
Application For chemical solution for anti-scaling and regeneration of resins
Type Vertical Cylindrical Drum
One is 50 liters for Anti-Scaling Dosing, Two 100 Liter for
Capacity Regeneration of MB, 2 For DM plant
MOC HDPE
Scope Kelvin

07. CARTRIDGE HOUSING-2 Nos.

Location 1 No. After DMF vessel and 1 no. before MB plant
Application For retaining filters
Capacity 2000 & 1000 LPH
Dimension in inch Suitable to flow
In and Out 1” and 1”
MOC UPVC
Make Shine/Equivalent
Scope Kelvin

08. CARTRIDGE FILTER-2 Nos.

Location Inside cartridge housing
Application For retaining particles up to 5 microns
Capacity 2000 & 1000 LPH per cartridge
Dimension in inch Suitable to flow
MOC Polypropylene
Make Shine/Equivalent
Scope Kelvin

09. MEMBRANE HOUSING-1 No.

Location After high pressure Pump
Application To hold and inserting membrane to pass the water
 RO+DM+MB PLANT 1000 LPH
Type Horizontal
Model 8040
MOC FRP
Port End port
Make UKL/Matrix/Kaitube/Equivalent
Scope Kelvin

10. RO MEMBRANE-1 No.

Location Inside membrane housing
Application For treating water with reverse osmosis technique
Type Spiral wounded
Model 8040
Max Flow 1000 LPH
MOC Thin film composite polyamide spiral
Make Hydronautics/LG/Burton/Equivalent
Scope Kelvin

11. DM PLANT FEED PUMP-1 No.

Location After RO plant
Application To feed raw water into plant
Type Mono-block
Working flow 1 m3/hour
Working Pressure 1-3 kg/ cm²
Phase Single phase/Three phase
MOC CI
Make Crompton/Kirloskar/Equivalent
Scope Kelvin

12. VESSEL FOR CATION RESIN-1 No.

Location After RO Membrane
Application To store anion resin
Type Vertical
Size Diameter 325 mm x Height 1350 mm
Working flow 1 m³/hour
Resin Cation
MOC Fiber glass reinforced plastic (FRP)
Make Pentair/KAI/Alfa/Starlite/Equivalent
Scope Kelvin
 RO+DM+MB PLANT 1000 LPH
13. VESSEL FOR ANION RESIN-1 No.
Location After Cation vessel
Application To remove fine organic matter, color and odor
Type Vertical
Size Diameter 325 mm x Height 1350 mm
Working flow 1 m³/hour
Resin Anion
MOC Fiber glass reinforced plastic (FRP)
Make Pentair/KAI/Alfa/Starlite/Equivalent
Scope Kelvin

14. CATION RESIN: 1 Lot

Location Inside cation vessel
Application To exchange positive ions
Contents Ion exchange cation resin
Scope Kelvin

15. ANION RESIN: 1 Lot

Location Inside anion vessel
Application To exchange negative ions
Contents Ion exchange anion resin
Scope Kelvin

16. MB FEED PUMP-1 No.

Location After RO plant
Application To feed raw water into plant
Type Mono-block
Working flow 1 m3/hour
Working Pressure 1-3 kg/ cm²
Phase Three phase
Make Crompton/Kirloskar/Equivalent
Scope Kelvin

17. VESSEL FOR MIXED BED-1 No.

Location After MB Feed Pump
Application To remove fine suspended solids
Type Vertical
Size Diameter 325 mm x Height 1350 mm
Working flow 1 m³/hour
Backwash duration 15-20 minutes daily
 RO+DM+MB PLANT 1000 LPH
Filter Media Quartz sand with pebbles, gravels and activated carbon
MOC Fiber glass reinforced plastic (FRP)
Make Pentair/Starlite/Kai/Equivalent
Scope Kelvin

18. MB RESIN: 1 Lot

Location Inside MB vessel
Application To exchange negative & positive ions
Contents Ion exchange anion resin
Scope Kelvin

19. MULTI-PORT VALVE–4 Nos.

Location On the DMF, MB Vessel
Application Backwash of DMF and regeneration of MB Vessel
Type Top mount
Capacity 2 & 5 m3/hour
Make UKL/Initiative/Equivalent
Scope Kelvin

20. ROTA METER-3 Nos.

Location In control panel
Application For metering filter water and wastewater
Type Panel mounted
Capacity 2400/1200/600 LPH
Size As per required
Make Fluid/Eq.
Scope Kelvin

21. PRESSURE GAUGE-1 Lot

Location On pressure gauge and control panel
Application For metering pressure of pump
Type Diaphragm
Capacity 7 kg
Size 1”
Scope Kelvin

22. SS PLANT SKID-1 No.

Location Base of plant
Application To provide Platform for plant
Size According to space availability
MOC SS
 RO+DM+MB PLANT 1000 LPH
Make Kelvin
Scope Kelvin

23. AUTOMATIC FLOATS-3 Nos.

Location Inside the tanks
Application For automatic on off while tank gets empty and filled
Type Floating
Cable 3m
Used in Raw water tank and treated water tank
Make Aster/Equivalent
Scope Kelvin

24. AIR RELEASER VALVE-4 Nos.

Location On vessels
Application To remove air from plant
Type Top mounted
Make Kelvin/Equivalent
Scope Kelvin

25. LOW PRESSURE SWITCH-2 Nos.

Location Near high pressure pump
Application To protect HPP from dry run
Max. pressure 17-21 bar
Make Danfoss/Equivalent
Scope Kelvin

26. CONTROL PANEL-1 No.

Location Near vessel
Application To provide electrical connection to electrical part
Type Cubical type
Make of instruments L&T/Siemen/Equivalent
Accessories Box, MCB’s, contractors, connectors, switches and indicators
Make Kelvin
Scope Kelvin

27. WIRE AND CABLES-1 Lot

Location All over plant
Application To provide electricity to electrical part
Type Single core/Double core
MOC Copper
 RO+DM+MB PLANT 1000 LPH
Size 1-1.5 mm
Make Finolex/Polycab/Equivalent
Scope Kelvin

28. ONLINE CONDUCTIVITY & TDS METER-2 Nos.

Location In RO output line
Application For Measuring the TDS & conductivity of Treated Water
Type Digital
Size 1"
Make Aster
Scope Kelvin

29. COMPLETE PIPE AND FITTINGS-1 Lot

Location All over plant and tanks
Application To connect tanks and inter-connecting piping and fittings
Type UPVC/PVC/MS/SS
Pressure 10 kg
Size 25 to 50 NB
Make Tata/Jindal/Ashirwad/Astral/Equivalent
Scope Kelvin

30. RO FEED WATER TANK-1 No.

Location Before RO
Application To store raw water for feeding RO plant
Capacity 5000 LTR
MOC HDPE/Civil
Scope Client

31. RO PERMEATE WATER TANK-1 No.

Location Nearby RO+DM+MB plant
Application To store raw water for feeding DM plant
Capacity As per required capacity
MOC HDPE/Civil
Scope Client

32. DM TREATED WATER TANK-1 No.

Location Nearby RO+DM+MB plant
Application To store raw water for feeding MB
Capacity As per required Capacity
MOC HDPE/Civil
 RO+DM+MB PLANT 1000 LPH
Scope Client

33. TREATED WATER STORAGE TANK-1 No.

Location After DM plant
Application To store treated water
Capacity As per required capacity
MOC HDPE/Civil
Scope Client

ANNEXURE–VII: SCOPE OF SUPPLY

S.N. Description of Item

I. Supply of working mechanical equipment
II. Supply of electrical items
III. Supply of instrumentation items
IV. Supply of piping, valves and other accessories
V. Structural fabrication works
VI. Operator’s training
VII. Visit to site at key stages of work
VIII. Providing instruction for proper functioning of plant
IX. Erection, testing & commissioning
X. Design, drawings & consultancy services.

ANNEXURE–VIII: SCHEDULE OF EXCLUSION

01. All civil work such as plant foundation of the equipment, mass connecting (any
major connection out of our line like RO rejected line, inlet line to RO) etc.
02. Supply of power of motors and regeneration chemical.
03. Laboratory testing facility, instruments and regents.
04. Lubricants, oil & grease as and when required.
05. Raw water tank, transfer pump, product water storage tank and transfer pump.
06. Storage & site security.
07. Labor as and when required at your site. Loading, unloading and for other work.
 RO+DM+MB PLANT 1000 LPH
ANNEXURE–IV: PRICE, COMMERCIAL TERMS & CONDITIONS

PRICE: Price for the above system is as follows:

• RO+DM+MB PLANT 1000 LPH: ₨. 3,65,000/-
INSTALLATION AND COMMISSIONING CHARGES: RS. 15,000/-

PRICE BASE : Transportation for site shall be charged extra.

TAXES : GST @ 18% shall be extra.
DELIVERY : Plant will be installed within 5 to 6 weeks from date of receipt of
your order along with advance payment.
INSTALLATION : Plant will be installed by our engineer at your site. However, you
will get all connection ready as stated above prior to calling our
engineer for Installation.
PAYMENT : 50% Advance along with order and balance 50% before dispatching
of material. Installation charges shall be paid within 1 week of
installation.
WARRANTY : One year against manufacturing defects. Plant is designed for
successful running for a long run. No warranty on membrane and
consumable items (filters, chemicals and all other consumables parts).
We are responsible for any manufacturing defects and technical
defects in plant. But if defect is due to customer behalf then standard
charges will apply.

Your operator will be trained to rectify minor problems if any.