Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
36 views

Pulse Width Modulation

This document discusses pulse width modulation techniques. It begins by defining pulse width modulation as a switching technique that generates pulses of varying widths from an analog signal. It then describes the key components of duty cycle and frequency. The document goes on to explain different types of pulse width modulation including single pulse, multiple pulse, sinusoidal, trapezoidal and staircase. It also discusses the effects of harmonics and total harmonic distortion. The key applications of pulse width modulation are in controlling power to devices like motors.

Uploaded by

Noman M Hasan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
36 views

Pulse Width Modulation

This document discusses pulse width modulation techniques. It begins by defining pulse width modulation as a switching technique that generates pulses of varying widths from an analog signal. It then describes the key components of duty cycle and frequency. The document goes on to explain different types of pulse width modulation including single pulse, multiple pulse, sinusoidal, trapezoidal and staircase. It also discusses the effects of harmonics and total harmonic distortion. The key applications of pulse width modulation are in controlling power to devices like motors.

Uploaded by

Noman M Hasan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Lesson Four: Pulse Width Modulation

Learning Outcomes:
After the ending of the lesson, students will be able to know

 About different types of pulse width modulation techniques.


 Pulse generation process
 Effect of total harmonics distortion.
 Applications of pulse width modulation
 Advantages and disadvantages of different types of pulse width modulation.

Pulse Width Modulation


Pulse width modulation is one kinds of switching techniques where different width of pulses is
generated from an analog signal. It has two components. One is duty cycle and another is
frequency.
The duty cycle describes the amount of time the signal is in a high (on) state as a percentage of
the total time of it takes to complete one cycle.
The frequency determines how fast the PWM completes a cycle (i.e. 1000 Hz would be 1000
cycles per second), and therefore how fast it switches between high and low states.
Although this modulation technique can be used to encode information for transmission.
Its main use is to allow the control of the power supplied to electrical devices, especially to
inertial loads such as motors.
Different Types of Pulse Width Modulation
SINGLE-PULSE WIDTH MODULATION
MULTIPLE-PULSE WIDTH MODULATION
SINUSOIDAL PULSE WIDTH MODULATION
TRAPEZOIDAL PULSE WIDTH MODULATION
SIXTY DEGREE SINUSOIDAL PULSE WIDTH MODULATION
STAIRCASE PULSE WIDTH MODULATION etc.

Harmonics
Harmonics are integer multiples of a fundamental frequency. If the fundamental frequency is 5-
kHz:

1st harmonic 1 x 5kHz


2nd harmonic 2 x 5kHz
3rd harmonic 3 x 5kHz
4th harmonic 4 x 5kHz etc.

Note that the 1st and 3rd harmonics are called odd harmonics and the2nd and 4th are called
even harmonics.

Effect of Total Harmonic Distortion


As total harmonic distortion (THD) has an adverse effect on equipment and conductor. Higher THD offers increased
heating loss, arising false triggering, and a reduced lifetime of devices. In addition, it also increases the cost and
size of the filtering devices. Then again, inferior THD offers an advanced power factor, lesser pick currents, and
higher efficiency. That is why it is very essential to diminish the THD of the multilevel inverter.

M. T. Islam, M. R. Islam, M. S. B. Islam and M. S. Rahman, "Improvement in Performance of Asymmetric Multilevel Inverter Used for Grid
Integrated Solar Photovoltaic Systems," 2019 5th International Conference on Advances in Electrical Engineering (ICAEE), Dhaka, Bangladesh,
2019, pp. 91-96.

SINGLE-PULSE WIDTH MODULATION


Single pulse for half cycle generates from this techniques.
It consists of a pulse located symmetrical about π/2 and another pulse located
symmetrical about 3π/2.
The shape of the output voltage is Quasi-Square wave.
Great deal of harmonic content is introduced in the output voltage.
The amplitude of harmonic content is 0.33 units.
Very poor performance at lower voltages.
Fig.1. Single Pulse Width Modulation

MULTIPLE-PULSE WIDTH MODULATION


It is an extension to single pulse width modulation.
More pulses will exist in a half cycle.
The width of every single pulse is same. Comparator Trigger pulse generator
Triangular wave Square wave Trigger pulses to SCR.
The lower order harmonics are eliminated.
The magnitude of higher harmonics would go up.
This has more applications than single-pulse width modulation in olden days.

Fig.2. Multiple Pulse Width Modulation


SINUSOIDAL PULSE WIDTH MODULATION
Pulses will have different widths.
The width of the individual pulse will be decided according to the angular
position of sine wave.
Height of the pulse is kept as constant
Odd multiple of 3 and even harmonics are suppressed
Popularly accepted pulse width modulation technique.

Fig.3. Sinusoidal Pulse Width Modulation Process.


Trapezoidal Pulse Width Modulation

Fig.4. Trapezoidal Pulse Width Modulation

You might also like