Register

No.:

EXCEL ENGINEERING COLLEGE (AUTONOMOUS)

End Semester EXAMINATION : NOV/DEC-2022

B.E. AERONAUTICAL ENGINEERING

Time : 3:00 HOURS

PART-A
CO BL
Answer ALL questions (10 x 2 = 20 Marks)
1 Classify different stages in material selection. CO1 L1
2 Write Short notes on Development of testing methods. CO1 L1
3 What is the purpose of bend test? CO2 L1
4 What is meant by fatigue test? CO2 L1
5 What are factors involved in health safety issues in Radiography? CO3 L1
6 State the basic principle involved in Thermography testing CO3 L1
7 What is the information which can be revealed by Magnetic
CO4 L1
Techniques of a component?
8 Define Spectroscopic techniques. CO4 L1
9 Define thermal testing in material characterization CO5 L1
10 Write down the importance of chemical testing CO5 L1
PART-B
CO BL
Answer All the questions (5 x 16 = 80 Marks)
11 (a) Explain different Testing standards used in industries CO1 L1
OR
(b) Explain about Various testing Organization and Committees. CO1 L1
12 (a) Explain in detail about different types of hardness test with neat
CO2 L1
sketch.
OR
(b) Illustrate the basic principle of tensile test carried out in mild steel CO2 L1
 specimen with step by step procedure.
13 (a) Discuss about the physical principles of liquid penetrant testing
with neat sketch. Also bring out the advantages and limitations of CO3 L1
the liquid penetrant testing.
OR
(b) How fatigue crack is detected using eddy current inspection?
CO3 L1
Explain the procedure involved.
14 (a) Explain electron microscopy with application, limitation and
CO4 L1
application
OR
(b) Explain TEM working principle, limitation, advantages and its
CO4 L1
application
15 (a) What is Thermal analysis? Describe the working principle of DTA
CO5 L1
equipment with neat sketch.
OR
(b) Describe the working principle of DTA with neat sketch CO5 L1

Set 2
 EXCEL ENGINEERING COLLEGE (AUTONOMOUS)
Affiliated to Anna University, Chennai. Approved by AICTE, New Delhi
Pallakapalayam, Komarapalayam, Namakkal Dt.

End Semester EXAMINATION : NOV/DEC-2022

B.E. AERONAUTICAL ENGINEERING

Time : 3:00 HOURS

PART-A
CO BL
Answer ALL questions (10 x 2 = 20 Marks)
1 Define material testing CO1 L1
2 What is standardization in testing? CO1 L1
3 List the few application of fatigue testing. CO2 L1
4 Mention the importance of creep test. CO2 L1
5 List the disadvantage of thermography test. CO3 L1
6 List the disadvantage of eddy current inspection CO3 L1
7 Define Spectroscopic techniques. CO4 L1
8 What is the information which can be revealed by Magnetic
CO4 L1
Techniques of a component?
 9 State Mass Spectrometry. CO5 L1
10 What is the purpose of thermal analysis? CO5 L1
PART-B
CO BL
Answer All the questions (5 x 16 = 80 Marks)
11 (a) Discuss various engineering materials used in the field of
CO1 L1
engineering.
OR
(b) Briefly describe about the development in material testing. CO1 L1
12 (a) Describe the basic principle of Creep and Fatigue test with a
suitable diagram. And also list down advantages and limitations of CO2 L1
destructive testing
OR
(b) Explain in detail about different types of hardness test with neat
CO2 L1
sketch.
13 (a) Discuss about the physical principles of liquid penetrant testing
with neat sketch. Also bring out the advantages and limitations of CO3 L1
the liquid penetrant testing.
OR
(b) Illustrate with neat sketch about the arrangement of Acoustic
CO3 L1
emission testing setup with its principal and advantages
14 (a) Briefly write about magnetic characterization techniques with its
CO4 L1
advantages and application.
OR
(b) Explain TEM working principle, limitation, advantages and its
CO4 L1
application
15 (a) Discuss briefly about plasma and Mass Spectrometry. CO5 L1
OR
(b) Discuss any two chemical testing methods with the help of neat
CO5 L1
sketch