Conforms to Regulation (EC) No.

1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI

2019/758

SAFETY DATA SHEET

Marathon IQ2 Comp A

SECTION 1: Identification of the substance/mixture and of the company/
undertaking
1.1 Product identifier
Product name : Marathon IQ2 Comp A
UFI : PH14-A3EU-V00S-QE29
Product code : 35042
Product description : Paint.
Product type : Liquid.
Other means of : Not available.
identification
1.2 Relevant identified uses of the substance or mixture and uses advised against
Use in coatings - Industrial use
Use in coatings - Professional use
1.3 Details of the supplier of the safety data sheet
Jotun A/S Jotun Paints (Europe) Ltd.
P.O.Box 2021 Stather Road
3202 Sandefjord Flixborough, Scunthorpe
Norway North Lincolnshire
Tel: + 47 33 45 70 00 DN15 8RR
Fax: +47 33 45 72 42 England
E-mail: SDSJotun@jotun.no
Tel: +44 17 24 40 00 00
Fax: +44 17 24 40 01 00
1.4 Emergency telephone number
National advisory body/Poison Centre
Telephone number : Contact NHS Direct; phone 0845 4647 or 111. Open 24/7.
Supplier
Telephone number : +47 33 45 70 00 Jotun Norway (head office)
35042;33404 1,2 35042 Industrial applications, Professional applications, Used by spraying.

^(ValidationDate)
Yes
1

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Product definition : Mixture
Classification according to UK CLP/GHS
Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
The product is classified as hazardous according to UK CLP Regulation SI 2019/720 as amended.
See Section 16 for the full text of the H statements declared above.
See Section 11 for more detailed information on health effects and symptoms.

2.2 Label elements

Hazard pictograms :

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 1/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 2: Hazards identification

Signal word : Warning.
Hazard statements : H315 - Causes skin irritation.
H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.
H411 - Toxic to aquatic life with long lasting effects.
Precautionary statements
General : Not applicable.
Prevention : P280 - Wear protective gloves. Wear eye or face protection.
P273 - Avoid release to the environment.
P261 - Avoid breathing vapour.
Response : P391 - Collect spillage.
P362 + P364 - Take off contaminated clothing and wash it before reuse.
P302 + P352 - IF ON SKIN: Wash with plenty of water.
P333 + P313 - If skin irritation or rash occurs: Get medical advice or attention.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 - If eye irritation persists: Get medical advice or attention.
Storage : Not applicable.
Disposal : P501 - Dispose of contents and container in accordance with all local, regional,
national and international regulations.
Supplemental label : EUH205 - Contains epoxy constituents. May produce an allergic reaction.
elements EUH211 - Warning! Hazardous respirable droplets may be formed when sprayed.
Do not breathe spray or mist.
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market and
use of certain dangerous
substances, mixtures and
articles
Special packaging requirements
Containers to be fitted : Not applicable.
with child-resistant
fastenings
Tactile warning of danger : Not applicable.

2.3 Other hazards

Product meets the criteria : This mixture does not contain any substances that are assessed to be a PBT or a
for PBT or vPvB according vPvB.
to Regulation (EC) No.
1907/2006, Annex XIII
Other hazards which do : None known.
not result in classification

SECTION 3: Composition/information on ingredients

3.2 Mixtures : Mixture
Product/ingredient name Identifiers % Classification Type
epoxy resin (MW ≤ 700) REACH #: ≥25 - ≤50 Skin Irrit. 2, H315 [1]
01-2119456619-26 Eye Irrit. 2, H319
EC: 216-823-5 Skin Sens. 1B, H317
CAS: 1675-54-3 Aquatic Chronic 2,
Index: 603-073-00-2 H411
barium sulfate EC: 231-784-4 ≥10 - ≤25 Not classified. [2]
CAS: 7727-43-7
titanium dioxide REACH #: ≤10 Carc. 2, H351 [1] [2]
01-2119489379-17 (inhalation) [*]
EC: 236-675-5
CAS: 13463-67-7

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 2/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 3: Composition/information on ingredients

Index: 022-006-00-2
alumina REACH #: ≤10 Not classified. [2]
01-2119529248-35
EC: 215-691-6
CAS: 1344-28-1
oxirane, 2,2'-[1,6-hexanediylbis EC: 240-260-4 ≤5 Skin Irrit. 2, H315 [1]
(oxymethylene)]bis- CAS: 16096-31-4 Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Chronic 3,
H412
talc (non-asbestos form) EC: 238-877-9 ≤5 Not classified. [2]
CAS: 14807-96-6
silane, trimethyoxy[3-(oxiranyl- REACH #: <3 Eye Dam. 1, H318 [1]
methoxy)propyl]- 01-2119513212-58 Aquatic Chronic 3,
EC: 219-784-2 H412
CAS: 2530-83-8
benzyl alcohol REACH #: ≤3 Acute Tox. 4, H302 [1]
01-2119492630-38 Acute Tox. 4, H332
EC: 202-859-9 Eye Irrit. 2, H319
CAS: 100-51-6
Index: 603-057-00-5
See Section 16 for
the full text of the H
statements declared
above.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment, are PBTs, vPvBs or Substances of
equivalent concern, or have been assigned a workplace exposure limit and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit
[*] The classification as a carcinogen by inhalation applies only to mixtures placed on the market in powder form
containing 1% or more of titanium dioxide particles with aerodynamic diameter ≤ 10 μm not bound within a matrix.
Occupational exposure limits, if available, are listed in Section 8.

SECTION 4: First aid measures

4.1 Description of first aid measures
Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention.
Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If not breathing, if breathing is irregular or if respiratory arrest occurs, provide
artificial respiration or oxygen by trained personnel. It may be dangerous to the
person providing aid to give mouth-to-mouth resuscitation. Get medical attention if
adverse health effects persist or are severe. If unconscious, place in recovery
position and get medical attention immediately. Maintain an open airway. Loosen
tight clothing such as a collar, tie, belt or waistband. In case of inhalation of
decomposition products in a fire, symptoms may be delayed. The exposed person
may need to be kept under medical surveillance for 48 hours.
Skin contact : Wash with plenty of soap and water. Remove contaminated clothing and shoes.
Wash contaminated clothing thoroughly with water before removing it, or wear
gloves. Continue to rinse for at least 10 minutes. Get medical attention. In the
event of any complaints or symptoms, avoid further exposure. Wash clothing before
reuse. Clean shoes thoroughly before reuse.

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 3/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 4: First aid measures

Ingestion : Wash out mouth with water. Remove dentures if any. If material has been
swallowed and the exposed person is conscious, give small quantities of water to
drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not
induce vomiting unless directed to do so by medical personnel. If vomiting occurs,
the head should be kept low so that vomit does not enter the lungs. Get medical
attention if adverse health effects persist or are severe. Never give anything by
mouth to an unconscious person. If unconscious, place in recovery position and get
medical attention immediately. Maintain an open airway. Loosen tight clothing such
as a collar, tie, belt or waistband.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Wash contaminated clothing thoroughly with water before removing it, or wear
gloves.

4.2 Most important symptoms and effects, both acute and delayed
There are no data available on the mixture itself. The mixture has been assessed following the conventional method
of the CLP Regulation (EC) No 1272/2008 and is classified for toxicological properties accordingly. See Sections 2
and 3 for details.

Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result
in adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the
kidneys, liver and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular
weakness, drowsiness and, in extreme cases, loss of consciousness.
Solvents may cause some of the above effects by absorption through the skin. Repeated or prolonged contact with
the mixture may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption
through the skin.
If splashed in the eyes, the liquid may cause irritation and reversible damage.
This takes into account, where known, delayed and immediate effects and also chronic effects of components from
short-term and long-term exposure by oral, inhalation and dermal routes of exposure and eye contact.

Based on the properties of the epoxy constituent(s) and considering toxicological data on similar mixtures, this
mixture may be a skin sensitiser and an irritant. It contains low molecular weight epoxy constituents which are
irritating to eyes, mucous membrane and skin. Repeated skin contact may lead to irritation and to sensitisation,
possibly with cross-sensitisation to other epoxies. Skin contact with the mixture and exposure to spray mist and
vapour should be avoided.

Contains epoxy resin (MW ≤ 700), oxirane, 2,2'-[1,6-hexanediylbis(oxymethylene)]bis-. May produce an allergic
reaction.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
redness
Ingestion : No specific data.

4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : In case of inhalation of decomposition products in a fire, symptoms may be delayed.
The exposed person may need to be kept under medical surveillance for 48 hours.
Specific treatments : No specific treatment.

See toxicological information (Section 11)

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 4/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 5: Firefighting measures

5.1 Extinguishing media
Suitable extinguishing : Recommended: alcohol-resistant foam, CO₂, powders, water spray.
media
Unsuitable extinguishing : Do not use water jet.
media

5.2 Special hazards arising from the substance or mixture

Hazards from the : In a fire or if heated, a pressure increase will occur and the container may burst.
substance or mixture This material is toxic to aquatic life with long lasting effects. Fire water
contaminated with this material must be contained and prevented from being
discharged to any waterway, sewer or drain.
Hazardous combustion : Decomposition products may include the following materials:
products carbon dioxide
carbon monoxide
sulfur oxides
halogenated compounds
carbonyl halides
metal oxide/oxides

5.3 Advice for firefighters

Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without
suitable training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained
equipment for fire-fighters breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Avoid breathing vapour or
mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".

6.2 Environmental : Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
precautions and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air). Water polluting material. May be harmful
to the environment if released in large quantities. Collect spillage.

6.3 Methods and material for containment and cleaning up

Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop
up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry
material and place in an appropriate waste disposal container. Dispose of via a
licensed waste disposal contractor.
Large spill : Stop leak if without risk. Move containers from spill area. Approach the release
from upwind. Prevent entry into sewers, water courses, basements or confined
areas. Wash spillages into an effluent treatment plant or proceed as follows.
Contain and collect spillage with non-combustible, absorbent material e.g. sand,
earth, vermiculite or diatomaceous earth and place in container for disposal
according to local regulations (see Section 13). Dispose of via a licensed waste
disposal contractor. Contaminated absorbent material may pose the same hazard
as the spilt product. Note: see Section 1 for emergency contact information and
Section 13 for waste disposal.

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 5/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 6: Accidental release measures

6.4 Reference to other : See Section 1 for emergency contact information.

sections See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.

SECTION 7: Handling and storage

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
7.1 Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8). Persons with a
history of skin sensitization problems should not be employed in any process in
which this product is used. Do not get in eyes or on skin or clothing. Do not ingest.
Avoid breathing vapour or mist. Avoid release to the environment. Keep in the
original container or an approved alternative made from a compatible material, kept
tightly closed when not in use. Empty containers retain product residue and can be
hazardous. Do not reuse container.
Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is
occupational hygiene handled, stored and processed. Workers should wash hands and face before
eating, drinking and smoking. Remove contaminated clothing and protective
equipment before entering eating areas. See also Section 8 for additional
information on hygiene measures.

7.2 Conditions for safe storage, including any incompatibilities

Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and
well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly
closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright
to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental
contamination. See Section 10 for incompatible materials before handling or use.
Seveso Directive - Reporting thresholds
Danger criteria
Category Notification and MAPP Safety report threshold
threshold
E2 200 tonne 500 tonne
See Technical Data Sheet / packaging for further information.

7.3 Specific end use(s)

Recommendations : Not available.
Industrial sector specific : Not available.
solutions

SECTION 8: Exposure controls/personal protection

8.1 Control parameters
Occupational exposure limits
Product/ingredient name Exposure limit values
barium sulfate EH40/2005 WELs (United Kingdom (UK), 1/2020).
TWA: 4 mg/m³ 8 hours. Form: respirable dust
TWA: 10 mg/m³ 8 hours. Form: inhalable dust
titanium dioxide EH40/2005 WELs (United Kingdom (UK), 1/2020).
TWA: 4 mg/m³ 8 hours. Form: respirable
TWA: 10 mg/m³ 8 hours. Form: total inhalable
alumina EH40/2005 WELs (United Kingdom (UK), 1/2020).
TWA: 4 mg/m³ 8 hours. Form: respirable dust
TWA: 10 mg/m³ 8 hours. Form: inhalable dust
talc (non-asbestos form) EH40/2005 WELs (United Kingdom (UK), 1/2020).
TWA: 1 mg/m³ 8 hours. Form: respirable dust

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 6/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 8: Exposure controls/personal protection

Biological exposure indices
No exposure indices known.
Recommended monitoring : Reference should be made to appropriate monitoring standards. Reference to
procedures national guidance documents for methods for the determination of hazardous
substances will also be required.
DNELs/DMELs
Product/ingredient name Type Exposure Value Population Effects
epoxy resin (MW ≤ 700) DNEL Long term Dermal 89.3 µg/kg General Systemic
bw/day population
DNEL Long term Oral 0.5 mg/kg General Systemic
bw/day population
DNEL Long term Dermal 0.75 mg/ Workers Systemic
kg bw/day
DNEL Long term 0.87 mg/m³ General Systemic
Inhalation population
DNEL Long term 4.93 mg/m³ Workers Systemic
Inhalation
barium sulfate DNEL Long term 10 mg/m³ Workers Local
Inhalation
DNEL Long term 10 mg/m³ General Systemic
Inhalation population
DNEL Long term 10 mg/m³ Workers Systemic
Inhalation
DNEL Long term Oral 13000 mg/ General Systemic
kg bw/day population
alumina DNEL Long term 15.63 mg/ Workers Local
Inhalation m³
DNEL Long term Oral 3.29 mg/ General Systemic
kg bw/day population
[Consumers]
DNEL Long term 0.75 mg/m³ General Local
Inhalation population
DNEL Long term 0.75 mg/m³ General Systemic
Inhalation population
DNEL Long term Oral 1.32 mg/ General Systemic
kg bw/day population
DNEL Long term 3 mg/m³ Workers Local
Inhalation
DNEL Long term 3 mg/m³ Workers Systemic
Inhalation
talc (non-asbestos form) DNEL Short term 1.08 mg/m³ General Systemic
Inhalation population
DNEL Long term 1.08 mg/m³ General Systemic
Inhalation population
DNEL Short term 1.8 mg/m³ General Local
Inhalation population
DNEL Long term 1.8 mg/m³ General Local
Inhalation population
DNEL Short term 2.16 mg/m³ Workers Systemic
Inhalation
DNEL Long term 2.16 mg/m³ Workers Systemic
Inhalation
DNEL Long term Dermal 2.27 mg/ General Local
cm² population
DNEL Short term 3.6 mg/m³ Workers Local
Inhalation
DNEL Long term 3.6 mg/m³ Workers Local
Inhalation
DNEL Long term Dermal 4.54 mg/ Workers Local
cm²
DNEL Long term Dermal 21.6 mg/ General Systemic

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 7/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 8: Exposure controls/personal protection

kg bw/day population
DNEL Long term Dermal 43.2 mg/ Workers Systemic
kg bw/day
DNEL Short term Oral 160 mg/kg General Systemic
bw/day population
DNEL Long term Oral 160 mg/kg General Systemic
bw/day population
silane, trimethyoxy[3-(oxiranyl- DNEL Long term Oral 5 mg/kg General Systemic
methoxy)propyl]- bw/day population
DNEL Long term Dermal 5 mg/kg General Systemic
bw/day population
DNEL Long term Dermal 10 mg/kg Workers Systemic
bw/day
DNEL Long term 17 mg/m³ General Systemic
Inhalation population
DNEL Long term 70.5 mg/m³ Workers Systemic
Inhalation
DNEL Short term 26400 mg/ General Systemic
Inhalation m³ population
benzyl alcohol DNEL Long term Oral 4 mg/kg General Systemic
bw/day population
DNEL Long term Dermal 4 mg/kg General Systemic
bw/day population
DNEL Long term 5.4 mg/m³ General Systemic
Inhalation population
DNEL Long term Dermal 8 mg/kg Workers Systemic
bw/day
DNEL Short term Oral 20 mg/kg General Systemic
bw/day population
DNEL Short term Dermal 20 mg/kg General Systemic
bw/day population
DNEL Long term 22 mg/m³ Workers Systemic
Inhalation
DNEL Short term 27 mg/m³ General Systemic
Inhalation population
DNEL Short term Dermal 40 mg/kg Workers Systemic
bw/day
DNEL Short term 110 mg/m³ Workers Systemic
Inhalation
PNECs
Product/ingredient name Compartment Detail Value Method Detail
epoxy resin (MW ≤ 700) Fresh water 0.006 mg/l -
Marine 0.0006 mg/l -
Sewage Treatment 10 mg/l -
Plant
Fresh water sediment 0.996 mg/l -
Marine water sediment 0.0996 mg/l -
Soil 0.196 mg/l -
alumina Fresh water 74.9 μg/l -
Sewage Treatment 20 mg/l -
Plant
benzyl alcohol Fresh water 1 mg/l -
Marine 0.1 mg/l -
Sewage Treatment 39 mg/l -
Plant
Fresh water sediment 5.27 mg/kg dwt -
Marine water sediment 0.527 mg/kg dwt -
Soil 0.456 mg/kg dwt -

8.2 Exposure controls

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 8/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 8: Exposure controls/personal protection

Appropriate engineering : Good general ventilation should be sufficient to control worker exposure to airborne
controls contaminants.
Individual protection measures
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products,
before eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Contaminated work clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection : Safety eyewear complying to ISO 16321-1:2022 should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn,
unless the assessment indicates a higher degree of protection: chemical splash
goggles.
Skin protection
Hand protection
There is no one glove material or combination of materials that will give unlimited resistance to any individual or
combination of chemicals.
The breakthrough time must be greater than the end use time of the product.
The instructions and information provided by the glove manufacturer on use, storage, maintenance and
replacement must be followed.
Gloves should be replaced regularly and if there is any sign of damage to the glove material.
Always ensure that gloves are free from defects and that they are stored and used correctly.
The performance or effectiveness of the glove may be reduced by physical/chemical damage and poor
maintenance.
Barrier creams may help to protect the exposed areas of the skin but should not be applied once exposure has
occurred.
Gloves
Wear suitable gloves tested to ISO 374-1:2016.
Recommended, gloves(breakthrough time) > 8 hours: neoprene (> 0.35 mm), Viton® (> 0.7 mm), 4H/Silver
Shield® (> 0.07 mm), butyl rubber (> 0.4 mm)
May be used, gloves(breakthrough time) 4 - 8 hours: polyvinyl alcohol (PVA) (> 0.3 mm), nitrile rubber (> 0.4 mm),
PVC (> 0.5 mm)

For right choice of glove materials, with focus on chemical resistance and time of penetration, seek advice by the
supplier of chemical resistant gloves.
The user must check that the final choice of type of glove selected for handling this product is the most
appropriate and takes into account the particular conditions of use, as included in the user's risk assessment.
Body protection : Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Respiratory protection : If workers are exposed to concentrations above the exposure limit, they must use a
respirator according to EN 140. Use respiratory mask with charcoal and dust filter
when spraying this product, according to EN 14387 (as filter combination A2-P2). In
confined spaces, use compressed-air or fresh-air respiratory equipment. When use
of roller or brush, consider use of charcoalfilter.
Environmental exposure : Do not allow to enter drains or watercourses.
controls

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 9/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 9: Physical and chemical properties

The conditions of measurement of all properties are at standard temperature and pressure unless otherwise indicated.

9.1 Information on basic physical and chemical properties

Appearance
Physical state : Liquid.
Colour : Black, Blue., Green., Grey, Off-white., Red, Yellow.
Odour : Characteristic.
Odour threshold : Not applicable.
Melting point/freezing point : Not applicable.
Initial boiling point and : Lowest known value: 205.3°C (401.5°F) (benzyl alcohol). Weighted average:
boiling range 283.04°C (541.5°F)
Flammability : Not applicable.
Upper/lower flammability or : 0.43 - 13%
explosive limits
Flash point : Closed cup: 100°C (212°F)
Auto-ignition temperature : Not applicable.
Decomposition temperature : Not available.
pH : Not applicable.
Viscosity : Kinematic (40°C): >20.5 mm2/s
Solubility(ies) :
Media Result
cold water Not soluble
hot water Not soluble
Partition coefficient: n-octanol/ : Not available.
water
Vapour pressure : Highest known value: 0.007 kPa (0.05 mm Hg) (at 20°C) (benzyl alcohol).
Weighted average: 0.0003 kPa (0.002 mm Hg) (at 20°C)
Evaporation rate : 0.007 (benzyl alcohol) compared with butyl acetate
Density : 1.632 to 1.664 g/cm³
Vapour density : Highest known value: 11.7 (Air = 1) (epoxy resin (MW ≤ 700)). Weighted
average: 11.41 (Air = 1)
Explosive properties : Not available.
Oxidising properties : Not available.
Particle characteristics
Median particle size : Not applicable.

9.2 Other information

No additional information.

SECTION 10: Stability and reactivity

10.1 Reactivity : No specific test data related to reactivity available for this product or its ingredients.
10.2 Chemical stability : Stable under recommended storage and handling conditions (see Section 7).
10.3 Possibility of : Under normal conditions of storage and use, hazardous reactions will not occur.
hazardous reactions
10.4 Conditions to avoid : When exposed to high temperatures may produce hazardous decomposition
products.
10.5 Incompatible materials : Keep away from the following materials to prevent strong exothermic reactions:
oxidising agents, strong alkalis, strong acids.
10.6 Hazardous : Decomposition products may include the following materials: carbon monoxide,
decomposition products carbon dioxide, smoke, oxides of nitrogen.

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 10/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 11: Toxicological information

11.1 Information on toxicological effects
There are no data available on the mixture itself. The mixture has been assessed following the conventional method
of the CLP Regulation (EC) No 1272/2008 and is classified for toxicological properties accordingly. See Sections 2
and 3 for details.

Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result
in adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the
kidneys, liver and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular
weakness, drowsiness and, in extreme cases, loss of consciousness.
Solvents may cause some of the above effects by absorption through the skin. Repeated or prolonged contact with
the mixture may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption
through the skin.
If splashed in the eyes, the liquid may cause irritation and reversible damage.
This takes into account, where known, delayed and immediate effects and also chronic effects of components from
short-term and long-term exposure by oral, inhalation and dermal routes of exposure and eye contact.

Based on the properties of the epoxy constituent(s) and considering toxicological data on similar mixtures, this
mixture may be a skin sensitiser and an irritant. It contains low molecular weight epoxy constituents which are
irritating to eyes, mucous membrane and skin. Repeated skin contact may lead to irritation and to sensitisation,
possibly with cross-sensitisation to other epoxies. Skin contact with the mixture and exposure to spray mist and
vapour should be avoided.

Contains epoxy resin (MW ≤ 700), oxirane, 2,2'-[1,6-hexanediylbis(oxymethylene)]bis-. May produce an allergic
reaction.
Acute toxicity
Product/ingredient name Result Species Dose Exposure
epoxy resin (MW ≤ 700) LD50 Dermal Rabbit 20 g/kg -
LD50 Oral Mouse 15600 mg/kg -
benzyl alcohol LD50 Oral Rat 1230 mg/kg -
Acute toxicity estimates
Product/ingredient name Oral (mg/ Dermal Inhalation Inhalation Inhalation
kg) (mg/kg) (gases) (vapours) (dusts
(ppm) (mg/l) and mists)
(mg/l)
Marathon IQ2 Comp A 100819.7 N/A N/A 901.6 N/A
benzyl alcohol 1230 N/A N/A 11 N/A
Irritation/Corrosion
Product/ingredient name Result Species Score Exposure Observation
epoxy resin (MW ≤ 700) Eyes - Severe irritant Rabbit - 24 hours 2 -
milligrams
Skin - Mild irritant Rabbit - 500 -
milligrams
titanium dioxide Skin - Mild irritant Human - 72 hours -
oxirane, 2,2'- Eyes - Mild irritant Mammal - - - -
[1,6-hexanediylbis species
(oxymethylene)]bis- unspecified
Skin - Mild irritant Mammal - - - -
species
unspecified
silane, trimethyoxy[3- Eyes - Irritant Mammal - - - -
(oxiranyl-methoxy)propyl]- species
unspecified
benzyl alcohol Eyes - Mild irritant Mammal - - - -
species
unspecified
Sensitisation

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 11/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 11: Toxicological information

Product/ingredient name Route of Species Result
exposure
epoxy resin (MW ≤ 700) skin Mammal - species Sensitising
unspecified
oxirane, 2,2'- skin Mammal - species Sensitising
[1,6-hexanediylbis unspecified
(oxymethylene)]bis-
Mutagenicity
No known significant effects or critical hazards.
Carcinogenicity
It has been observed that the carcinogenic hazard of this product arises when respirable dust is inhaled in quantities
leading to significant impairment of particle clearance mechanisms in the lung.
No known significant effects or critical hazards.
Reproductive toxicity
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.
Teratogenicity
No known significant effects or critical hazards.
Specific target organ toxicity (single exposure)
Not available.
Specific target organ toxicity (repeated exposure)
Not available.
Aspiration hazard
Not available.

Potential acute health effects

Eye contact : Causes serious eye irritation.
Inhalation : No known significant effects or critical hazards.
Skin contact : Causes skin irritation. May cause an allergic skin reaction.
Ingestion : No known significant effects or critical hazards.
Symptoms related to the physical, chemical and toxicological characteristics
Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
redness
Ingestion : No specific data.
General : Once sensitized, a severe allergic reaction may occur when subsequently exposed
to very low levels.
Other information : None identified.

SECTION 12: Ecological information

12.1 Toxicity
There are no data available on the mixture itself.
Do not allow to enter drains or watercourses.

The mixture has been assessed following the summation method of the CLP Regulation (EC) No 1272/2008 and is
classified for eco-toxicological properties accordingly. See Sections 2 and 3 for details.

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 12/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 12: Ecological information

Product/ingredient name Result Species Exposure
epoxy resin (MW ≤ 700) Acute EC50 1.4 mg/l Daphnia 48 hours
Acute LC50 3.1 mg/l Fish - pimephales promelas 96 hours
Chronic NOEC 0.3 mg/l Fish 21 days
titanium dioxide Acute LC50 3 mg/l Fresh water Crustaceans - Water flea - 48 hours
Ceriodaphnia dubia - Neonate
Acute LC50 6.5 mg/l Fresh water Daphnia - Water flea - Daphnia 48 hours
pulex - Neonate
Acute LC50 >1000000 μg/l Marine Fish - Mummichog - Fundulus 96 hours
water heteroclitus
oxirane, 2,2'- Acute EC50 47 mg/l Daphnia 48 hours
[1,6-hexanediylbis
(oxymethylene)]bis-
Acute LC50 30 mg/l Fish - Cyprinidae (Leuciscus 96 hours
idus)
Conclusion/Summary : This material is toxic to aquatic life with long lasting effects.
12.2 Persistence and degradability
Conclusion/Summary : Not available.
Product/ingredient name Aquatic half-life Photolysis Biodegradability
epoxy resin (MW ≤ 700) - - Not readily
silane, trimethyoxy[3- - - Not readily
(oxiranyl-methoxy)propyl]-
benzyl alcohol - - Readily

12.3 Bioaccumulative potential

Product/ingredient name LogPow BCF Potential
epoxy resin (MW ≤ 700) 2.64 to 3.78 31 low
oxirane, 2,2'- 0.822 - low
[1,6-hexanediylbis
(oxymethylene)]bis-
benzyl alcohol 0.87 <100 low

12.4 Mobility in soil

Soil/water partition : Not available.
coefficient (KOC)
Mobility : Not available.

12.5 Results of PBT and vPvB assessment

This mixture does not contain any substances that are assessed to be a PBT or a vPvB.

12.6 Other adverse effects : No known significant effects or critical hazards.

SECTION 13: Disposal considerations

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
13.1 Waste treatment methods
Product
Methods of disposal : The generation of waste should be avoided or minimised wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation and
any regional local authority requirements. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Waste should not be disposed of
untreated to the sewer unless fully compliant with the requirements of all authorities
with jurisdiction.

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 13/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 13: Disposal considerations

Hazardous waste : Yes.
Waste catalogue
Waste code Waste designation
08 01 11* Waste paint and varnish containing organic solvents or other dangerous substances

Packaging
Methods of disposal : The generation of waste should be avoided or minimised wherever possible. Waste
packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible.
Type of packaging Waste catalogue
CEPE Guidelines 15 01 10* packaging containing residues of or contaminated by
hazardous substances
Special precautions : This material and its container must be disposed of in a safe way. Care should be
taken when handling emptied containers that have not been cleaned or rinsed out.
Empty containers or liners may retain some product residues. Avoid dispersal of
spilt material and runoff and contact with soil, waterways, drains and sewers.

SECTION 14: Transport information

ADR/RID ADN IMDG IATA
14.1 UN number UN3082 UN3082 UN3082 UN3082

14.2 UN proper Environmentally Environmentally Environmentally Environmentally

shipping name hazardous substance, hazardous substance, hazardous substance, hazardous substance,
liquid, n.o.s. (epoxy liquid, n.o.s. (epoxy liquid, n.o.s. (epoxy liquid, n.o.s. (epoxy
resin (MW ≤ 700)) resin (MW ≤ 700)) resin (MW ≤ 700)). resin (MW ≤ 700))
Marine pollutant
(epoxy resin (MW ≤
700))
14.3 Transport 9 9 9 9
hazard class(es)

14.4 Packing III III III III

group
14.5 Yes. Yes. Yes. Yes.
Environmental
hazards
Additional information
ADR/RID : This product is not regulated as a dangerous good when transported in sizes of ≤5 L
or ≤5 kg, provided the packagings meet the general provisions of 4.1.1.1, 4.1.1.2
and 4.1.1.4 to 4.1.1.8.
Hazard identification number 90
Tunnel code (-)
ADN : This product is not regulated as a dangerous good when transported in sizes of ≤5 L
or ≤5 kg, provided the packagings meet the general provisions of 4.1.1.1, 4.1.1.2
and 4.1.1.4 to 4.1.1.8.
IMDG : This product is not regulated as a dangerous good when transported in sizes of ≤5 L
or ≤5 kg, provided the packagings meet the general provisions of 4.1.1.1, 4.1.1.2
and 4.1.1.4 to 4.1.1.8.
Emergency schedules F-A, S-F
IATA : This product is not regulated as a dangerous good when transported in sizes of ≤5 L
or ≤5 kg, provided the packagings meet the general provisions of 5.0.2.4.1,
5.0.2.6.1.1 and 5.0.2.8.

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 14/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 14: Transport information

14.6 Special precautions for : Transport within user’s premises: always transport in closed containers that are
user upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.

14.7 Transport in bulk : Not available.

according to IMO
instruments

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
UK (GB)/REACH
Annex XIV - List of substances subject to authorisation
Annex XIV
None of the components are listed.
Substances of very high concern
None of the components are listed.

Ozone depleting substances

Not listed.

Prior Informed Consent (PIC)

Not listed.

Persistent Organic Pollutants

Not listed.
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market
and use of certain
dangerous substances,
mixtures and articles
Seveso Directive
This product is controlled under the Seveso Directive.
Danger criteria
Category
E2
EU regulations
Industrial emissions : Not listed
(integrated pollution
prevention and control) -
Air
Industrial emissions : Not listed
(integrated pollution
prevention and control) -
Water
International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Not listed.
Montreal Protocol
Not listed.
Stockholm Convention on Persistent Organic Pollutants
Not listed.

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 15/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 15: Regulatory information

Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.
UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.
15.2 Chemical safety : This product contains substances for which Chemical Safety Assessments are still
assessment required.

SECTION 16: Other information

Indicates information that has changed from previously issued version.
Abbreviations and : ATE = Acute Toxicity Estimate
acronyms GB CLP = UK CLP (EC No 1272/2008) on the Classification, Labelling and
Packaging of Substances and Mixtures as amended by (EU Exit) Regulations 2019
No. 720 and amendments
DMEL = Derived Minimal Effect Level
DNEL = Derived No Effect Level
EUH statement = GB CLP-specific Hazard statement
N/A = Not available
PBT = Persistent, Bioaccumulative and Toxic
PNEC = Predicted No Effect Concentration
RRN = REACH Registration Number
SGG = Segregation Group
vPvB = Very Persistent and Very Bioaccumulative
Procedure used to derive the classification
Classification Justification
Skin Irrit. 2, H315 Calculation method
Eye Irrit. 2, H319 Calculation method
Skin Sens. 1, H317 Calculation method
Aquatic Chronic 2, H411 Calculation method
Full text of abbreviated H statements
H302 Harmful if swallowed.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H351 Suspected of causing cancer.
H411 Toxic to aquatic life with long lasting effects.
H412 Harmful to aquatic life with long lasting effects.
Full text of classifications
Acute Tox. 4 ACUTE TOXICITY - Category 4
Aquatic Chronic 2 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 2
Aquatic Chronic 3 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 3
Carc. 2 CARCINOGENICITY - Category 2
Eye Dam. 1 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1
Eye Irrit. 2 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 2
Skin Irrit. 2 SKIN CORROSION/IRRITATION - Category 2
Skin Sens. 1 SKIN SENSITISATION - Category 1
Skin Sens. 1B SKIN SENSITISATION - Category 1B
Date of printing : 21.04.2023
Date of issue/ Date of : 21.04.2023
revision
Date of previous issue : 30.03.2023
Version : 1.02
Notice to reader

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 16/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758
Marathon IQ2 Comp A

SECTION 16: Other information

The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun
reserves the right to change the given data without further notice.

Date of issue/Date of revision : 21.04.2023 Date of previous issue : 30.03.2023 Version : 1.02 17/17