Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer

COMMUNICATIONS
Data communications are the exchange of data between two devices via some form of
transmission medium such as a wire or cable. For data communications to occur, the
communicating devices must be part of a communication system made up of a combination of
hardware (physical equipment) and software (programs).

The effectiveness of a data communications system depends on four fundamental characteristics:

1. Delivery
2. Accuracy
3. Timeliness and
4. Jitter.

1. Delivery: The system must deliver data to the correct destination.

2. Accuracy: The system must deliver the data accurately.
3. Timeliness: The system must deliver data in a timely manner. This kind of delivery is called
real-time transmission.
4. Jitter: Jitter refers to the variation in the packet arrival time.

Components

A data communications system has five components

Five Components of Data Communication System

1. Message: The message is the information (data) to be communicated.

Popular forms of information include text, numbers, pictures, audio, and video.

2. Sender: The sender is the device that sends the data message.
It can be a computer, workstation, telephone handset, video camera, and so on.

3. Receiver: The receiver is the device that receives the message.

It can be a computer, workstation, telephone handset, television, and so on.

4. Transmission medium: The transmission medium is the physical path by which a

message travels from sender toreceiver.
Examples of transmission media: Twisted-pair wire, coaxial cable, fiber-optic cable,
and radio waves etc.

5. Protocol: A protocol is a set of rules that govern data communications. It represents an

agreement between the communicating devices.
Example: Without a protocol, twodevicesmaybeconnected but not communicating,
just as a person speaking French cannot be understood by a person who speaks only
Japanese.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 1

 Module - 1 - Introduction to Network Model & Data Link Layer

Data Representation
Information today comes in different forms such as TEXT, NUMBERS, IMAGES, AUDIO, and
VIDEO.

1. Text
In data communications, Text is represented as a bit pattern, a sequence of bits (0s or 1s).
Different sets of bit patterns have been designed to represent text symbols. Each set is
called a code, and the process of representing symbols is called coding.

2. Numbers
Numbers are also represented by bit patterns. However, a code such as ASCII is not used to
represent numbers; the number is directly converted to a binary number to simplify
mathematical operations.

3. Images
Images are also represented by bit patterns. In its simplest form, an image is composed of a
matrix of pixels (picture elements), where each pixel is a small dot. The size of the pixel
depends on the resolution.

4. Audio
Audio refers to the recording or broadcasting of sound or music. Audio is by nature
different from text, numbers, or images. It is continuous, not discrete.

5. Video
Video refers to the recording or broadcasting of a picture or movie. Video can either be
produced as a continuous entity (e.g., by a TV camera), or it can be a combination of images,
each a discrete entity, arranged to convey the idea of motion.

Data Flow
Communication between two devices can be simplex, half-duplex, or full-duplex

Simplex
In simplex mode, the communication is unidirectional (one-way). Only one of the two deviceson
a link can transmit; the other can only receive. The simplex mode can use the entire capacity of the
channel to send data in one direction

Example: The keyboard can only introduce input; the monitor can only accept output.
Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 2
 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer
Half-Duplex
In half-duplex mode, each station can both transmit andreceive, but not at the same time. When
one device is sending, the other can only receive, and vice versa. The entire capacity of the channel
can be utilized for each transmission direction.

Example: Walkie-talkies and CB (citizens band) radios.

Full-Duplex
In full-duplex mode, both stations can transmit and receive simultaneously. The capacity of the
channel, however, must be divided between the two directions

Example: Telephone network.

NETWORKS
A network is the interconnection of a set of devices capable of communication. These devices in a
network are connected using wired or wireless transmission media such as cable or air.

Example: Device can be a host (Computer, desktop, laptop, work station, cellular phone, or
security system) or (Connecting device such as a router, a switch, a modem and so on).

Network Criteria
A network must be able to meet a certain number of criteria. The most important of these are
Performance, Reliability and Security.

1. Performance
The performance of a network depends on a number of factors, including the number of
users, the type of transmission medium, the capabilities of the connected hardware, and
the efficiency of the software. Performance is often evaluated by two networking metrics:
throughput and delay.

2. Reliability
Network reliability is measured by the frequency of failure, the time it takes a link to
recover from a failure, and the network’s robustness in a catastrophe.

3. Security
Network security issues include protecting data from unauthorized access, protecting data
from damage and development, and implementing policies and procedures for recovery
from breaches and data losses.

Transit time and response time:

Transit time is the amount of time required for a message to travel from one device to another.
Response time is the elapsed time between an inquiry and a response.

Physical Structures
Type of Connection
A network is two or more devices connected through links. A link is a communications pathway
that transfers data from one device to another. There are two possible types of connections: point-
to-point and multipoint.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 3

 Module - 1 - Introduction to Network Model & Data Link Layer

Point-to-Point
A point-to-point connection provides adedicatedlink between twodevices. Theentirecapacity
of the link is reserved for transmission between those two devices.

Most point-to-point connections use an actual length of wire or cable to connect the two ends, but
other options, such as microwave or satellite links, are also possible.

Example: When we change television channels by infrared remote control, we are establishing a
point-to-point connection between the remote control and the television’s control system.

Multipoint
A multipoint (also called multidrop) connection is one in which morethan two specific devices
share a single link. In a multipoint environment, the capacity of the channel is shared, it is a
timeshared connection.

Physical Topology
The topology of a network is the geometric representation of the relationship of all the links and
linking devices is connected physically (usually called nodes). There are four basic topologies
possible: MESH, STAR, BUS, and RING.

Mesh Topology
In a mesh topology, every device has a dedicated point-to-point link to every other device.

A mesh offers several advantages over other network topologies.

1. First, the use of dedicated links guarantees that each connection can carry its own data
load, thus eliminating the traffic problems that can occur when links must be shared by
multiple devices.
2. Second, a mesh topology is robust. If one link becomes unusable, it does not incapacitate
the entire system.
3. Third, there is the advantage of privacy or security. When every message travels along a
dedicated line, only the intended recipient sees it.
Physical boundaries prevent other users from
gaining access to messages.

4. Finally, point-to-point links make fault

identification and fault isolation easy. Traffic can
be routed to avoid links with suspected problems.
This facility enables the network manager to
discover the precise location of the fault and aids in
finding its cause and solution.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 4

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer
Star Topology
In a star topology, each device has a dedicated point-to-point link only to a central controller,
usually called a hub. The devices are not directly linked to one another.

Star topology does not allow direct traffic between

devices. The controller acts as an exchange: If one device
wants to send data to another, it sends the data to the
controller, which then relays the data to the other
connected device.

A star topology is less expensive than a mesh topology;

each device needs only one link and one I/O port to
connect it to any number of others. This factor also makes it easy to install and reconfigure. Far
less cabling needs to be housed, and additions, moves, and deletions involve only one connection:
between that device and the hub.

Other advantages include robustness. If one link fails, only that link is affected. All other links
remain active. This factor also lends itself to easy fault identification and fault isolation. As long as
the hub is working, it can be used to monitor link problems and bypass defective links.

One big disadvantage of a star topology is the dependency of the whole topology on one single, the
hub. If the hub goes down, the whole system is dead.

The star topology is used in local-area networks (LANs), High-speed LANs often use a star
topology with a central hub.

Bus Topology
A bus topology is multipoint. One long cable acts as a backbone to link all the devices in a
network. Nodes are connected to the bus cable by drop lines and taps.

A drop line is a connection running between the device and the main cable. A tap is a connector to
create a contact with themetallic core.

Advantages of a bus topology include ease of installation. Backbone cable can be laid along the
most efficient path, and then connected to the nodes by drop lines of various lengths. In this way, a
bus uses less cabling than mesh or star topologies.

Disadvantages include difficult reconnection and fault isolation. There is a limit on the number of
taps a bus can support and on the distance between those taps.

Ring Topology
In a ring topology, each device has a dedicated point-to-point connection with only the two
devices on either side of it. A signal is passed along the ring in one direction, from device to device,
until it reaches its destination. Each device in the ring incorporates a repeater. When a device
receives a signal intended for another device, its repeater regenerates the bits and passes them
along.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 5

 Module - 1 - Introduction to Network Model & Data Link Layer

Advantages
A ring is relatively easy to install and reconfigure. Fault isolation is simplified.

Disadvantage
In a simple ring, a break in the ring (such as a disabled station) can disable the entire network.

This weakness can be solved by using a dual ring or a switch capable of closing off the break. Ring
topology was prevalent when IBM introduced its local-area network, Token Ring. Today, the need
for higher-speed LANs has made this topology less popular.

Hybrid: The combination of the above topologies

NETWORK TYPES
Two types of networks, LANs and WANs, we define switching, which is used to connect networks
to form an internetwork (a network of networks).

Local Area Network

 A local area network (LAN) is usually privately owned and connects some hosts in a single
office, building, or campus.
 Depending on the needs of an organization, a LAN can be as simple as two PCs and a printer
in someone’s home office, or it can extend throughout a company and include audio and
video devices.
 Each host in a LAN has an identifier, an address that uniquely defines the host in the LAN.
 A packet sent by a host to another host carries both the source host’s and the destination
host’s addresses.
 A LAN is normally limited in size, spanning an office, a building, or a campus.
 A LAN interconnects hosts

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 6

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer
In the past, all hosts in a network were connected through a common cable, which meant that a
packet sent from one host to another was received by all hosts. The intended recipient kept the
packet; the others dropped the packet.

Today, most LANs use a smart connecting switch, which is able to recognize the destination
address of the packet and guide the packet to its destination without sending it to all other hosts.
The switch alleviates the traffic in the LAN and allows more than one pair to communicate with
each other at the same time if there is no common source and destination among them.

Wide Area Network

A wide area network (WAN) is also an interconnection of devices capable of communication.
 WAN has a wider geographical span, spanning a town, a state, a country, or even the world.
 WAN interconnects connecting devices such as switches, routers, or modems.
 WAN is normally created and run by communication companies and leased by an
organization that uses it.

Two distinct examples of WANs today:

 Point-to-point WANs and
 Switched WANs.

Switched WAN
 A switched WAN is a network with more than two ends.
 A switched WAN is used in the backbone of global communication today.
 A switched WAN is a combination of several point-to-point WANs that are connected by
switches.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 7

 Module - 1 - Introduction to Network Model & Data Link Layer

Point-to-Point WAN
A point-to-point WAN is a network that connects two communicating devices through a
transmission media (cable or air).

Difference between LANs and WANs

LANs WANs
limited in size wider geographical span
A LAN interconnects hosts WAN interconnects connecting devices
privately owned by the organization Created and run by communication companies

A heterogeneous network made of four WANs and three LANs

MAN: Metropolitan Area Network

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 8

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer

Switching
An internet is a switched network in which a switch connects at least two linkstogether. A switch
needs to forward data from a network to another network when required.

Types of switched networks

 Circuit-switched and
 Packet-switched networks.

Circuit-Switched Network
 In a circuit-switched network, a dedicated connection, called a circuit, is always available
between the two end systems; the switch can only make it active or inactive.

 Figure shows a very simple switched network that connects four telephones to each end,
because circuit switching was very common in telephone networks in the past.
 The four telephones at each side are connected to a switch.
 The switch connects a telephone set at one side to a telephone set at the other side.
 The thick line connecting two switches is a high-capacity communication line that can
handle four voice communications at the same time; the capacity can be shared between all
pairs of telephone sets.
 The switches used in this example have forwarding tasks but no storing capability.
 Circuit-switched network is efficient only when it is working at its full capacity.
Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 9
 Module - 1 - Introduction to Network Model & Data Link Layer

Packet-Switched Network
 In a computer network, the communication between the two ends is done in blocks of data
called packets.
 This allows us to make the switches function for both storing and forwarding because a
packet is an independent entity that can be stored and sent later.

 Figure shows a small packet-switched network that connects four computers at one site to
four computers at the other site.
 A router in a packet-switched network has a queue that can store and forward the packet.
 Packet-switched network is more efficient than a circuit-switched network, but the packets
may encounter some delays.

The Internet
 An internet is two or more networks that can communicate with each other. Internet is
composed of thousands of interconnectednetworks.

 Figure shows a conceptual (not geographical) view of the Internet. The figure shows the
Internet as several backbones, provider networks, and customer networks.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 10

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer
 At the top level, the backbones are large networks owned by some communication
companies such as Sprint, Verizon (MCI), AT&T, and NTT.
 The backbone networks are connected through some complex switching systems, called
peering points.
 At the second level, there are smaller networks, called provider networks.
 The provider networks are connected to backbones and sometimes to other provider
networks. The customer networks are networks at the edge of the Internet that actually use
the services provided by theInternet.
 Backbones and provider networks are also called Internet Service Providers (ISPs). The
backbones are often referred to as international ISPs; the provider networks are often
referred to as national or regional ISPs.

Accessing the Internet

The Internet today is an internetwork that allows any user to become part of it. The user, however,
needs to be physically connected to an ISP. The physical connection is normally done through a
point-to-point WAN.

1. Using Telephone Networks

Today option for residences and small businesses to connect to the Internet is to change the voice
line between the residence or business and the telephone center to a point-to-point WAN. This can
be done in two ways.

❑ Dial-up service. The first solution is to add to the telephone line a modem that converts
data to voice. The software installed on the computer dials the ISP and imitates making a
telephone connection. Unfortunately, the dial-up service is very slow, and when the line is
used for Internet connection, it cannot be used for telephone (voice) connection. It is only
useful for small residences.

❑ DSL Service. Since the advent of the Internet, some telephone companies have upgraded
their telephone lines to provide higher speed Internet services to residences or small
businesses. The DSL service also allows the line to be used simultaneously for voice and
data communication.

2. Using Cable Networks

More and more residents over the last two decades have begun using cable TV services instead of
antennas to receive TV broadcasting. The cable companies have been upgrading their cable
networks and connecting to the Internet. It provides a higher speed connection, but the speed
varies depending on the number of neighbors that use the same cable.

3. Using Wireless Networks

Wireless connectivity has recently become increasingly popular. A household or a small business
can use a combination of wireless and wired connections to access the Internet. With the growing
wireless WAN access, a household or a small business can be connected to the Internet through a
wireless WAN.

4. Direct Connection to the Internet

A large organization or a large corporation can itself become a local ISP and be connected to the
Internet. This can be done if the organization or the corporation leases a high-speed WAN from a
carrier provider and connects itself to a regional ISP.
Example, a large university with several campuses can create an internetwork and then connect
the internetwork to the Internet.
Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 11
 Module - 1 - Introduction to Network Model & Data Link Layer

Important Questions:
1. Identify the five components of a data communications system.
2. What are the three criteria necessary for an effective and efficient network?
3. What are the advantages of a multipoint connection over a point-to-point one?
4. What are the two types of line configuration?
5. Categorize the four basic topologies in terms of line configuration.
6. What is the difference between half-duplex and full-duplex transmission modes?
7. Name the four basic network topologies, and cite an advantage of each type.
8. For n devices in a network, what is the number of cable links required for a mesh, ring, bus,
and star topology?
9. What are some of the factors that determine whether a communication system is a LAN or
WAN?
10. What is an internet? What is the Intranet?
11. Why are protocols needed?

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 12

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer
PROTOCOL LAYERING
We defined the term protocol in Chapter 1. In data communication and networking, a protocol
defines the rules that both the sender and receiver and all intermediate devices need to follow to
be able to communicate effectively. When communication is simple, we may need only one simple
protocol; when the communication is complex, we may need to divide the task between different
layers, in which case we need a protocol at each layer, or protocol layering.

Scenarios
Let us develop two simple scenarios to better understand the need for protocol layering.

First Scenario
In the first scenario, communication is so simple that it can occur in only one layer. Assume Maria
and Ann are neighbors with a lot of common ideas. Communication between Maria and Ann takes
place in one layer, face to face, in the same language, as shown in Figure below.

A single-layer protocol
Second Scenario
 In the second scenario, the communication is happens from a far place, continue their
communication and exchange ideas using regular mail through the post office.
 However, they do not want their ideas to be revealed by other people if the letters are
intercepted. They agree on an encryption/decryption technique.
 The sender of the letter encrypts it to make it unreadable by an intruder; the receiver of the
letter decrypts it to get the original letter.
 Now the communication takes place in three layers, as shown in Figure.
 Protocol layering enables us to divide a complex task into several smaller and simpler
tasks.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 13

 Module - 1 - Introduction to Network Model & Data Link Layer

Principles of Protocol Layering

Two principles of protocol layering.

First Principle
The first principle dictates that if we want bidirectional communication, need to make each layer
so that it is able to perform two opposite tasks, one in each direction.

Example
 The third layer task is to listen (in one direction) and talk (in the other direction).
 The second layer needs to be able to encrypt and decrypt.
 The first layer needs to send and receive mail.

Second Principle
The second principle is need to follow in protocol layering is that the two objects under each layer
at both sites should be identical.

Example
 The object under layer 3 at both sites should be a plain text letter.
 The object under layer 2 at both sites should be a cipher text letter.
 The object under layer 1 at both sites should be a piece of mail.

Logical Connections
 Logical connection between each layer as shown in Figure. This means that, layer-to-layer
communication.
 Logical (imaginary) connection at each layer through which they can send the object
created from that layer.

TCP/IP PROTOCOL SUITE: (Transmission Control Protocol/Internet Protocol).

 TCP/IP is a protocol suite (a set of protocols organized in different layers) used in the
Internet today.
 It is a hierarchical protocol made up of interactive modules, each of which provides a
specific functionality.
 The term hierarchical means that each upper level protocol is supported by the services
provided by one or more lower level protocols.
 The original TCP/IP protocol suite was defined as four software layers built upon the
hardware. However, TCP/IP is a five-layer model. Figure shows both configurations.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 14

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer

Layered Architecture
To show how the layers in the TCP/IP protocol suite are involved in communication between two
hosts, we assume that we want to use the suite in a small internet made up of three LANs (links),
each with a link-layer switch. We also assume that the links are connected by one router, as shown
in Figure.

Example, if computer A communicates with computer B.

 The five communicating devices in this communication: source host (computer A), the link-
layer switch in link 1, the router, the link-layer switch in link 2, and the destination host
(computer B).
 Each device is involved with a set of layers depending on the role of the device in the
internet.
 The two hosts are involved in all five layers; the source host needs to create a message in
the application layer and send it down the layers so that it is physically sent to the
destination host.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 15

 Module - 1 - Introduction to Network Model & Data Link Layer

 The destination host needs to receive the communication at the physical layer and then
deliver it through the other layers to the application layer.
 The router is involved in only three layers; network, Data link and Physical layer.
 A link-layer switch in a link, however, is involved only in two layers, data-link and physical.

Layers in the TCP/IP Protocol Suite

Figure shows logical connections in our simple internet. Using logical connections makes it easier
for us to think about the duty of each layer.

The duty of the application, transport, and network layers is end-to-end. However, the duty of the
data-link and physical layers is hop-to-hop, in which a hop is a host or router.

In other words, the domain of duty of the top three layers is the internet, and the domain of duty
of the two lower layers is the link.

Figure shows the second principle for protocol layering, shows the identical objects below each
layer related to each device. Note that the link between two hops does not change the object.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 16

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer
Description of Each Layer
i) Physical Layer:
 The physical layer is responsible for movements of individual bits from one hop (node) to
the next
 Mechanical and electrical specification, the procedures and functions

Physical Layer: Duties

 Physical characteristics of interfaces and media
 Representation of bits, encoding
 Transmission of Data rate and bit duration
 Synchronization of bits b/n sender & receiver
 Line configuration: Point-to-Point / Multi-Point
 Physical topology of n/w connection
 Transmission mode: simplex, half-duplex / full-duplex, analog/digital, FDM/TDM etc..

ii) Data Link Layer:

 The data link layer is responsible for moving frames from one hop (node) to the next
 Transform the physical layer to a reliable (error-free) link
 Bit patterns at the beginning (Header) and the end (Trailer) of the frame are attached to
the data block

Data Link Layer: Duties

 Framing (manageable data units) and link management
 Physical addressing to identify sender/receiver

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 17

 Module - 1 - Introduction to Network Model & Data Link Layer

 Flow control mechanism to avoid flooding of the receiver

 Error control mechanism to detect and retransmit the lost frames
 Access control to determine which device has the control over the link

Hop-to-Hop Delivery

iii) Network Layer:

 The network layer is responsible for the delivery of packets from the source host to the
destination host

Network Layer: Duties

 Routing of packets from source to final destination
 Congestion control during traffic is high
 Logical address to be attached to specify the sender/receiver

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 18

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer

Source-to-destination delivery

iv) Transport Layer:

 Transport layer is responsible for the delivery of a message from one process to another.

Transport Layer: Duties

 Service-point (port) addressing: to ensure process-to-process delivery
 Segmentation and reassembly
 Connection control: connectionless / connection oriented service
 Flow control: control on transaction
 Error control: error free delivery

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 19

 Module - 1 - Introduction to Network Model & Data Link Layer

Reliable Process-to-Process Delivery of a Message

v) Application Layer:
The Application layer is responsible for providing services to the user.

Application Layer: Duties

 Network virtual terminal (Remote access)
 File transfer, access and management
 Mail services
 Directory services

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 20

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer
Encapsulation and Decapsulation
One of the important concepts in protocol layering in the Internet is encapsulation/decapsulation.
Figure shows this concept for the small internet.

We have not shown the layers for the link-layer switches because no encapsulation/decapsulation
occurs in this device. In Figure 2.8, we show the encapsulation in the source host, decapsulation in
the destination host, and encapsulation and Decapsulation in the router.

Encapsulation at the Source Host

At the source, we have only encapsulation.
1. At the application layer, the data to be exchanged is referred to as a message. A message
normally does not contain any header or trailer, but if it does, we refer to the whole as the
message. The message is passed to the transport layer.
2. The transport layer takes the message as the payload, the load that the transport layer should
take care of. It adds the transport layer header to the payload, which contains the identifiers of the
source and destination application programs that want to communicate plus some more
information that is needed for the end-toend delivery of the message, such as information needed
for flow, error control, or congestion control. The result is the transport-layer packet, which is
called the segment (in TCP) and the user datagram (in UDP). The transport layer then passes the
packet to the network layer.
3. The network layer takes the transport-layer packet as data or payload and adds its own header
to the payload. The header contains the addresses of the source and destination hosts and some
more information used for error checking of the header, fragmentation information, and so on.
The result is the network-layer packet, called a datagram. The network layer then passes the
packet to the data-link layer.
4. The data-link layer takes the network-layer packet as data or payload and adds its own header,
which contains the link-layer addresses of the host or the next hop (the router). The result is the
link-layer packet, which is called a frame. The frame is passed to the physical layer for
transmission.

Decapsulation and Encapsulation at the Router

At the router, we have both decapsulation and encapsulation because the router is connected to
two or more links.
1. After the set of bits are delivered to the data-link layer, this layer decapsulates the datagram
from the frame and passes it to the network layer.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 21

 Module - 1 - Introduction to Network Model & Data Link Layer

2. The network layer only inspects the source and destination addresses in the datagram header
and consults its forwarding table to find the next hop to which the datagram is to be delivered. The
contents of the datagram should not be changed by the network layer in the router unless there is
a need to fragment the datagram if it is too big to be passed through the next link. The datagram is
then passed to the data-link layer of the next link.
3. The data-link layer of the next link encapsulates the datagram in a frame and passes it to the
physical layer for transmission.

Decapsulation at the Destination Host

At the destination host, each layer only decapsulates the packet received, removes the payload,
and delivers the payload to the next-higher layer protocol until the message reaches the
application layer. It is necessary to say that decapsulation in the host involves error checking.

Addressing:
Four levels of addresses are used in an internet employing the TCP/IP Protocols:
a) Physical addresses
b) Logical addresses
c) Port addresses
d) Specific addresses

Each address is related to a specific layer in the TCP/IP architecture, as shown in the above fig.

a) Physical Address:
A node with physical address 10 sends a frame to a node with physical address 87. The two
nodes are connected by a link (bus topology LAN). As the figure shows, the computer with
physical address 10 is the sender, and the computer with physical address 87 is the receiver.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 22

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer

b) Logical (IP) Address

The physical addresses will change from hop to hop, but the logical addresses usually remain
the same

c) Port Address
The physical addresses change from hop to hop, but the logical and port addresses usually
remain the same

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 23

 Module - 1 - Introduction to Network Model & Data Link Layer

d) Specific Address

 Some application have user-friendly addresses that are designed for that specific address
 Example 1: e-mail address: kchung@kw.ac.kr
 Defines the recipient of ane-mail
 Example 2: URL (Universal Resource Locator) : www.google.com
 Used to find a document on the WWW

Difference between port address, a logical address and physical address

 Physical Address: Specifies the name of the Address of Source & Destination
 Logical Address: Specifies the Identification of the Device or Machine
 Port Address: Specifies the name of the File or Data

Multiplexing and Demultiplexing

Since the TCP/IP protocol suite uses several protocols at some layers, it has multiplexing at the
source and demultiplexing at the destination.
Multiplexing in this case means that a protocol at a layer can encapsulate a packet from
several next-higher layer protocols (one at a time); demultiplexing means that a protocol
can decapsulate and deliver a packet to several next-higher layer protocols (one at a time).
Figure shows the concept of multiplexing and demultiplexing at the three upper layers.
To be able to multiplex and demultiplex, a protocol needs to have a field in its header to
identify to which protocol the encapsulated packets belong.
At the transport layer, either UDP or TCP can accept a message from several application-
layer protocols.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 24

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer



 At the network layer, IP can accept a segment from TCP or a user datagram from UDP. IP
can also accept a packet from other protocols such as ICMP, IGMP, and so on.
 At the data-link layer, a frame may carry the payload coming from IP or other protocols
such as ARP.

THE OSI MODEL

The OSI model shown in fig is based on the proposal developed by the International Standards
Organization (ISO) as a first step towards international standardization of the protocols used in
the various layers. The model is called the OSI (Open System Interconnection) reference model
because it deals with connecting open systems, i.e., systems that are open for communication with
other systems. The purpose of the OSI model is to show how to facilitate communication between
different systems without requiring changes to the logic of the underlying hardware and software.

The OSI model is not a protocol; it is a model for understanding and designing a network
architecture that is flexible, robust and interoperable. The OSI model is a layered framework for
the design of network systems that allows communication between all types of computer systems.
It consists of seven separate but related layers, each of which defines a part of the process of
moving information across anetwork.

The principles that were applied to arrive at the seven layers are as follows:
 A layer should be created where a different level of abstraction is needed.
 Each layer should perform a well-defined function.
 The function of each layer should be chosen with an eye toward defining internationally
standardized protocols.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 25

 Module - 1 - Introduction to Network Model & Data Link Layer

 The layer boundaries should be chosen to minimize the information flow across the
interfaces.
 The number of layers should be large enough that distinct functions need not be thrown
together in the same layer out of necessity and small enough that the architecture does not
become unwieldy.

Layered Architecture:

The OSI model is composed of seven layers: Physical, Data link, Network, Transport, Session,
Presentation, Application layers. Below figure shows the layers involved when a message travels
from A to B, it may pass through many intermediate nodes. These intermediate nodes involve only
the first 3 layers of the OSI model.

Within a single machine, each layer calls upon the services of the layer just below it, layer 3 for ex.
Uses the services provided by layer 2 & provides services for layer 4. Between machines, layer X
on one machine communicates with layer X on another machine. This communication is governed
by an agreed upon series of rules & Conventions called protocols. The processes on each machine
that communicate at a given layer are called peer – to – peer processes. Communication between
machines is therefore a peer – to –peer process using the protocols appropriate to a given layer.

Fig: Interaction between layers in the OSI model

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 26

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer

OSI versus TCP/IP

When we compare the two models, we find that two layers, session and presentation, are missing
from the TCP/IP protocol suite. The application layer in the suite is usually considered to be the
combination of three layers in the OSI model, as shown in Figure.

Two reasons were mentioned for this decision.

 First, TCP/IP has more than one transport-layer protocol. Some of the functionalities of the
session layer are available in some of the transport-layer protocols.
 Second, the application layer is not only one piece of software. Many applications can be
developed at this layer. If some of the functionalities mentioned in the session and
presentation layers are needed for a particular application, they can be included in the
development of that piece of software.

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 27

 Module - 1 - Introduction to Network Model & Data Link Layer

Lack of OSI Model’s Success

The OSI model appeared after the TCP/IP protocol suite. Most experts were at first excited and
thought that the TCP/IP protocol would be fully replaced by the OSI model.
First, OSI was completed when TCP/IP was fully in place and a lot of time and money had
been spent on the suite; changing it would cost a lot. (Economic Loss)
Second, some layers in the OSI model were never fully defined. (Protocols not defined for
Presentation and Session Layers)
Third, when OSI was implemented by an organization in a different application, high
enough level of performance was not achieved to entice the Internet authority to switch
from the TCP/IP protocol suite to the OSI model. (Expected Efficiency is low)

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 28

 Computer Communication Networks-18EC61 Module - 1 - Introduction to Network Model & Data Link Layer

Mrs.Chaitra S N., Dept of ECE., GMIT., Davangere 29