Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    Iogp S-563 Mds Id145

    Uploaded by

    FIKRI BADRUL
    This material data sheet provides information on ferritic-austenitic stainless steel type 22Cr duplex plates, sheets, and strips. It specifies standards, grades, chemical composition limits, required heat treatment and testing methods. Additional requirements are specified for sour service applications, including hardness testing and full traceability of the material. The material must be manufactured and qualified according to referenced quality standards, and inspection documents must include specified information to confirm compliance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Iogp S-563 Mds Id145

    Uploaded by

    FIKRI BADRUL
    66 views2 pages
    This material data sheet provides information on ferritic-austenitic stainless steel type 22Cr duplex plates, sheets, and strips. It specifies standards, grades, chemical composition limits, required heat treatment and testing methods. Additional requirements are specified for sour service applications, including hardness testing and full traceability of the material. The material must be manufactured and qualified according to referenced quality standards, and inspection documents must include specified information to confirm compliance.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This material data sheet provides information on ferritic-austenitic stainless steel type 22Cr duplex plates, sheets, and strips. It specifies standards, grades, chemical composition limits, required heat treatment and testing methods. Additional requirements are specified for sour service applications, including hardness testing and full traceability of the material. The material must be manufactured and qualified according to referenced quality standards, and inspection documents must include specified information to confirm compliance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    66 views2 pages

    Iogp S-563 Mds Id145

    Uploaded by

    FIKRI BADRUL
    This material data sheet provides information on ferritic-austenitic stainless steel type 22Cr duplex plates, sheets, and strips. It specifies standards, grades, chemical composition limits, required heat treatment and testing methods. Additional requirements are specified for sour service applications, including hardness testing and full traceability of the material. The material must be manufactured and qualified according to referenced quality standards, and inspection documents must include specified information to confirm compliance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Material Data Sheets for Piping and Valve Components

    Table A.20 — MDS ID145 / ID145S

    Material Data Sheet MDS No. ID145 / ID145S a Rev. 01


    TYPE OF MATERIAL: Ferritic-Austenitic stainless steel type 22Cr duplex

    PRODUCT FORM STANDARD GRADE ACCEPTANCE CLASS SUPPLEMENTARY


    REQUIREMENT

    Plates, sheets, strips ASTM A240 UNS S31803 - ASTM A240 S1


    ASTM A240 UNS S32205 - ASTM A240 S1
    Page 1 of 2
    Scope This MDS defines applicable options and/or requirements that supplement or amend the referenced standard
    specification.

    Qualification Manufacturers and the manufacturing process shall be qualified in accordance with ISO 17782 or
    NORSOK M-650. The qualification testing shall meet the requirements of this MDS.

    Metal making The melt shall be refined by AOD or equivalent method.

    Chemical UNS S31803: N = 0.14 % - 0.20 %


    composition

    Heat treatment The plates shall be solution annealed followed by water/liquid quenching.
    Plates shall be placed in such a way as to ensure free circulation of heating and cooling media around each
    plate during the heat treatment process including quenching.

    Tensile testing Tensile test specimens shall be sampled in the transverse orientation to the direction of final rolling.

    Impact testing / The sampling of test specimens, testing methodology and acceptance criteria shall comply with
    toughness testing ISO 17781 QL II.

    Corrosion testing The sampling of test specimens, testing methodology and acceptance criteria shall be in accordance with
    ISO 17781.

    Micrographic The sampling of test specimens, testing methodology and acceptance criteria for microstructural examination
    examination including ferrite measurements shall be in accordance with ISO 17781.

    Extent of testing One tensile, one set of impact tests, one corrosion test and one micrographic examination including ferrite
    measurement shall be carried out for each heat of steel and heat treatment lot.

    Non-destructive Visual inspection


    testing VT shall be carried out on each plate in accordance with the product standard. The testing shall be performed
    after machining, if applicable, and non-machined surfaces shall be cleaned prior to the testing.

    Valve plate NDT


    Inspection of plate for valve parts shall be according to the applicable valve specification. If a QSL is not
    specified by the purchaser, the requirements in this MDS shall apply.

    Repair of defects Weld repair is not permitted.

    Sour service When sour service requirements are specified by the purchaser, the material shall conform to the
    (additional requirements of ISO 15156/NACE MR0175 or ISO 17945/NACE MR0103, and the following additional
    metallurgical, requirements to the MDS.
    manufacturing,
    testing and Hardness testing
    certification Production testing shall be performed in accordance with the requirements in ASTM A370/A1058 on one plate
    requirements) a per lot. For coil, tests shall be carried out at both ends of the coil. The maximum hardness shall be 28HRC
    from three readings taken in close proximity at each location.

    The material shall be traceable in accordance with ISO 15156-3/NACE MR0175-3, section 7.2 and this MDS.

    Surface treatment Finished plates, sheets or strips shall be pickled.


    and finish

    Marking The plates, sheets or strips shall be marked to ensure full traceability to heat and heat treatment lot.

    Page 63 of 259 S-563 December 2021


    Material Data Sheets for Piping and Valve Components

    Material Data Sheet MDS No. ID145 / ID145S a Rev. 01


    TYPE OF MATERIAL: Ferritic-Austenitic stainless steel type 22Cr duplex

    PRODUCT FORM STANDARD GRADE ACCEPTANCE CLASS SUPPLEMENTARY


    REQUIREMENT

    Plates, sheets, strips ASTM A240 UNS S31803 - ASTM A240 S1


    ASTM A240 UNS S32205 - ASTM A240 S1
    Page 2 of 2
    Certification The material manufacturer shall have a quality system certified in accordance with ISO 9001 or another
    quality requirements standard accepted by the purchaser.
    The inspection documents shall be in accordance with ISO 10474 /EN 10204 Type 3.1 and shall confirm
    compliance with this specification.
    The inspection documents shall include the following information:
    – MPS identification or MCPR/QTR number used.
    – Steel manufacturer.
    – Solution annealing temperature, holding time and quench medium shall be stated.
    a
    The supplementary suffix “S” shall be used to designate a material delivered in accordance with the MDS plus the additional supplementary
    requirements for sour service.

    Page 64 of 259 S-563 December 2021

    You might also like