Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 231 views

    Fpso Piping Material Datasheet SO17033 PESDMCPF999001 A2 10 of 23

    Uploaded by

    alouis
    This document provides material data sheet information for carbon steel type 415LT seamless pipes. It specifies the standard, grade, heat treatment, chemical composition, hardness, impact testing requirements, extent of testing, non-destructive examination, surface finish, repair of defects, additional requirements including post-weld heat treatment simulation and certification. The pipes are intended for use in FPSO piping systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fpso Piping Material Datasheet SO17033 PESDMCPF999001 A2 10 of 23

    Uploaded by

    alouis
    231 views1 page
    This document provides material data sheet information for carbon steel type 415LT seamless pipes. It specifies the standard, grade, heat treatment, chemical composition, hardness, impact testing requirements, extent of testing, non-destructive examination, surface finish, repair of defects, additional requirements including post-weld heat treatment simulation and certification. The pipes are intended for use in FPSO piping systems.

    Original Description:

    X65 material

    Original Title

    X65

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides material data sheet information for carbon steel type 415LT seamless pipes. It specifies the standard, grade, heat treatment, chemical composition, hardness, impact testing requirements, extent of testing, non-destructive examination, surface finish, repair of defects, additional requirements including post-weld heat treatment simulation and certification. The pipes are intended for use in FPSO piping systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    231 views1 page

    Fpso Piping Material Datasheet SO17033 PESDMCPF999001 A2 10 of 23

    Uploaded by

    alouis
    This document provides material data sheet information for carbon steel type 415LT seamless pipes. It specifies the standard, grade, heat treatment, chemical composition, hardness, impact testing requirements, extent of testing, non-destructive examination, surface finish, repair of defects, additional requirements including post-weld heat treatment simulation and certification. The pipes are intended for use in FPSO piping systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    FPSO

    PIPING MATERIAL
    DATASHEET

    SO17033 PESDMCPF999001 A2 PAGE 10 of 23

    APPENDIX B.3 MDS – C24N – CARBON STEEL TYPE 415 LT – SEAMLESS PIPE
    Material Data Sheet
    Data Sheet No. C24N Sheet 1 of 1
    Material Type Carbon Steel, Type 450LT

    Product Standard Grade Acceptable Class Suppl Requirements


    Seamless Pipes API 5L X65 -
    This MDS covers the selected options in the referenced standard and additional
    Scope requirements which shall be added to or supersede the corresponding requirements in the
    referred standard.
    Manufacturing Process The steel shall be fully killed to fine grain practice.
    Seamless pipe may be supplied in the six following heat-treated conditions:
    1) Normalized, 2) Hot-rolled, 3) Annealed, 4) Normalized and tempered, 5) Normalized,
    Heat Treatment austenitized, quenched and tempered, 6) Austenitized, quenched and tempered.
    Seamless and welded pipe may alternatively be finished in the cold-drawn and normalized
    condition.

    Mn Cr Mo V Ni Cu
    Chemical Composition CE C
    6 5 15 < 0.43% (by product analysis).
    Seamless pipe (and where used as base-metal for fittings) : Sulphur 0.010% (= 100 ppm)
    Hardness The hardness shall be maximum 22 HRC.
    Charpy V-Notch testing according to ASME B31.3 para 323.3 for a design minimum
    Impact Testing temperature of minus 46 °C. The minimum absorbed en ergy shall be 40J average / 30J
    single.
    Charpy V-Notch impact testing and hardness testing shall be carried out for each lot as
    Extent of Testing defined in the referred standard. For batch furnace charges the specified test shall be
    carried out for each heat in each heat treatment charge.
    Samples for production testing shall realistically reflect the properties in the actual
    Test Sampling
    component.
    Non Destructive Section 9.8.5 of API 5L 43rd edition or Annex E.5 of API 5L / ISO 3183 shall apply.
    Examination
    The pipes shall be free from surface imperfections such as handling marks, straightening
    Surface Finish marks, light mandrel and die marks, shallow pits and scale pattern.

    Repair of Defects Weld repair is not acceptable.


    Jointers are not allowed. The yield to tensile strength ratio (actual values) shall not exceed
    Additional Requirements 0.9.
    Simulated Post-Weld Heat treatment of Mechanical Test Coupons: Test specimens
    representing the material shall be thermally treated to simulate two post-weld heat
    Additional Requirements treatments using the heat treatment parameters (temperature range and double the holding
    for pipes w/ wall time specified in ASME B31.3 paragraph 331). The test results for such heat treated test
    thickness >19mm specimens shall meet the applicable product specification requirements and shall be
    included on the material test report.
    EN 10204 Type 3.1. Compliance with NACE MR0175 / ISO 15156 shall be stated in the
    certificate.
    Certification Heat treatment temperature, soaking time and cooling medium shall be stated in the
    Certificate.

    You might also like