Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    DATASHEET A234 WPB FITTING

    Uploaded by

    akashda1989
    STD DATASHEET FOR A234 WPB FITTINGS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DATASHEET A234 WPB FITTING

    Uploaded by

    akashda1989
    35 views2 pages
    STD DATASHEET FOR A234 WPB FITTINGS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    STD DATASHEET FOR A234 WPB FITTINGS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views2 pages

    DATASHEET A234 WPB FITTING

    Uploaded by

    akashda1989
    STD DATASHEET FOR A234 WPB FITTINGS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Material Data Sheets for Piping and Valve Components

    Material Data Sheet MDS No. IC003 / IC003S a / IC003SH b Rev. 01


    TYPE OF MATERIAL: Non-impact tested carbon steel

    PRODUCT FORM STANDARD GRADE ACCEPTANCE CLASS SUPPLEMENTARY


    REQUIREMENT

    Wrought fittings ASTM A234 WPB - ASTM A234 S3

    ASTM A234 WPBW - ASTM A234 S3

    Page 1 of 2
    Scope This MDS defines applicable options and/or requirements that supplement or amend the referenced standard
    specification. Impact Test shall be Done IN Transverse Direction @ -29 Deg C With Min 27J

    Chemical Supplementary requirement ASTM A234 S3 applies with the following restrictions:
    Composition C ≤ 0.23 %, S ≤ 0.020 %, P ≤ 0.025 %, CE ≤ 0.43 %
    Microalloying elements (Nb, V, Ti, B) shall not be deliberately added.
    Heat Treatment Normalized or normalized and tempered or quenched and tempered. For products delivered in the tempered
    condition, the minimum tempering temperature shall be 620 °C (1 148 °F).
    All hot formed or forged fittings, including those manufactured by locally heating a portion of the fitting stock,
    shall be heat treated after manufacture.
    Tensile Testing Tensile testing shall be carried out on specimens cut from a fitting where dimensions permit. When removal of
    specimens is not possible due to the size of the fitting, a prolongation or a length of starting material that has
    been heat treated in the same heat treatment load as the fittings it represents shall be used.
    Non-Destructive UT is not acceptable in-lieu of RT.
    Testing 100 % MPT Shall be done on all the fittings , MPT Proceduere shall be approved by NDE -Level-3 Min.
    Repair of Defects Weld repair of the base material is not permitted.

    Repairs to weld metal are acceptable in accordance with the standard specification and shall meet the
    chemistry requirements of the original manufacturing weld.

    Sour Service When sour service requirements are specified by the purchaser, the material shall conform to the
    (additional requirements of ISO 15156 /NACE MR0175 or ISO 17945 /NACE MR0103, and the following additional
    metallurgical, requirements to the MDS:
    manufacturing,
    testing and Chemical composition
    from Seamless
    certification − S ≤ 0.010 % for WPB and WPBW fittings made from products other than flat-rolled or forged
    requirements) a, b
    − S ≤ 0.003 % for WPBW fitting made from flat-rolled products
    − S ≤ 0.020 % for WPB fitting made from forging

    Hardness testing
    WPB fittings production hardness testing shall be performed in accordance with the requirements in ASTM
    A234.
    Hardness testing for WPBW fittings:
    − Welding procedure qualification testing for manufacturing and any repair welding shall meet the
    requirements of NACE MR0175-2 /ISO 15156-2 section 7.3.3, using Vickers method, with a maximum
    hardness of 250HV.
    − Production testing shall be performed in accordance with the requirements in ASTM A234 and shall include
    parent material, weld and HAZ.

    HIC testing and UT examination


    When suffix SH applies, one finished WPBW fitting made from flat-rolled products per lot shall be tested as
    follows:
    − HIC testing:
    • HIC testing in accordance with NACE TM0284, using Test Solution A.
    • Acceptance criteria per specimen shall be CLR ≤ 15 %, CTR ≤ 5 %, CSR ≤ 2 %.
    • Maximum individual crack length shall be reported for each section.
    − UT testing of flat-rolled product before manufacture:
    • ASTM A578, S1, S2.1 shall apply.
    The material shall be traceable in accordance with ISO 15156-2 /NACE MR0175-2 section 9 and this MDS.

    Page 26 of 186 S-563 December 2018


    Material Data Sheets for Piping and Valve Components

    Material Data Sheet MDS No. IC003 / IC003S a / IC003SH b Rev. 01


    TYPE OF MATERIAL: Non-impact tested carbon steel

    PRODUCT FORM STANDARD GRADE ACCEPTANCE CLASS SUPPLEMENTARY


    REQUIREMENT

    Wrought fittings ASTM A234 WPB - ASTM A234 S3

    ASTM A234 WPBW - ASTM A234 S3

    Page 2 of 2
    Marking The fittings shall be marked to ensure full traceability to melt and heat treatment lot.

    Certification The material manufacturer shall have a quality system certified in accordance with ISO 9001 or another quality
    requirements standard accepted by the purchaser.

    The inspection documents shall be issued in accordance with ISO 10474 /EN 10204 Type 3.1 and shall
    confirm compliance with this specification.
    The inspection documents shall include the following information:
    − Heat treatment condition. For tempered condition, tempering temperature shall be stated.
    a
    The supplementary suffix “S” shall be used to designate a material delivered in accordance with the MDS plus the additional
    supplementary requirements for sour service, but excluding HIC testing and UT examination.
    b
    The supplementary suffix “SH” shall be used to designate a material delivered in accordance with the MDS including the additional
    supplementary requirements for sour service plus HIC testing and UT examination.

    Page 27 of 186 S-563 December 2018

    You might also like