D I S COV E R O U R

FLANGE TABLES
FLANGE TABLES

03 Flange Diagram and

Information
04 1/2" NB (DN15)
Flange table
05 3/4" NB (DN20)
Flange table
06 1" NB (DN25)
Flange table

07 1 1/4" NB (DN32)
Flange table
08 1 1/2" NB (DN40)
Flange table
09 2" NB (DN50)
Flange table
10 2 1/2" NB (DN65)
Flange table

11 3" NB (DN80)
Flange table
12 4" NB (DN100)
Flange table
13 5" NB (DN125)
Flange table
14 6" NB (DN150)
Flange table

15 8" NB (DN200)
Flange table
16 10" NB (DN250)
Flange table
17 12" NB (DN300)
Flange table
18 Pressure Rating
Imperial

19 Pressure Rating
Metric
20 Gasket materials
21 PVC Flanges & Tables
PN6/PN10
22 PVC Flanges & Tables
PN16/BS10/ASA150

WWW.VALVESONLINE.CO.UK
GENERAL
INFORMATION
Flanges are usually used to connect a There are many common flange standards and Nominal Diameter (DN):
valve into a pipework. flanges. The British standards relate to: metric DN stands for "Diameter Nominale".
sizing in the case of BS4504 and Imperial sizing It is a translation between imperial and
There are many different standards for BS10. The American standard, ANSI, is also metric sizing, though not exact.
throughout the world relating to the used in Britain.
1/2" DN15 5" DN125
sizing and specification of flange & bolt
sets. Within the same standards, these flanges can be 3/4" DN20 6" DN150
either flat faced (commonly cast iron, ductile 1" DN25 8" DN200
The most commonly used are: iron) or raised face (for cast steel and stainless
11/4" DN32 10" DN250
ASA / ANSI / ASME (USA), PN / DIN (EU), steel).
11/2" DN40 12" DN300
BS10 / BS4504 (British), and
JIS / KS (Japanese/Korean). 2" DN50 14" DN350

2/2" DN65 16" DN400

3" DN80 18" DN450

4" DN100 20" DN500

Flange
Holy
Diameter PCD
Diameter

PCD Pitch
Circle
Bore Diameter

Raised Face
Diameter

Flange PCD
Pitch Circle Diameter (PCD).
Flange Thickness Is the distance between the centre of the NOTE:
bolt holes.
Care must be taken in bolt fastening
sequences and in bolting torque.
FLANGE DIMENSIONS

1/2" NB (DN15) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

1/2" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 80mm 55mm 4 M10 11mm 40mm 2mm

PN10 95mm 65mm 4 M12 14mm 45mm 2mm

PN16 95mm 65mm 4 M12 14mm 45mm 2mm

PN25 95mm 65mm 4 M12 14mm 45mm 2mm

PN40 95mm 65mm 4 M12 14mm 45mm 2mm

PN64 105mm 75mm 4 M12 14mm 45mm 2mm

TABLE D 3 3/4" (95mm) 2 5/8" (67mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE E 3 3/4" (95mm) 2 5/8" (67mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE F 3 3/4" (95mm) 2 5/8" (67mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE H 4 1/2" (114mm) 3 1/4" (83mm) 4 5/8" (16mm) 11/16" (17mm) 2 1/4" (57mm) 1/16" (2mm)

ANSI 125/150 3 1/2" (89mm) 2 3/8" (60mm) 4 1/2" (13mm) 5/8" (16mm) 1 3/8" (35mm) 1/16" (2mm)

ANSI 300 3 3/4" (95mm) 2 5/8" (67mm) 4 1/2" (13mm) 5/8" (16mm) 1 3/8" (35mm) 1/16" (2mm)
FLANGE DIMENSIONS

3/4" NB (DN20) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

3/4" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 90mm 65mm 4 M10 11mm 50mm 2mm

PN10 105mm 75mm 4 M12 14mm 58mm 2mm

PN16 105mm 75mm 4 M12 14mm 58mm 2mm

PN25 105mm 75mm 4 M12 14mm 58mm 2mm

PN40 105mm 75mm 4 M12 14mm 58mm 2mm

PN64 130mm 90mm 4 M16 18mm 58mm 2mm

TABLE D 4" (102mm) 2 7/8" (73mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE E 4" (102mm) 2 7/8" (73mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE F 4" (102mm) 2 7/8" (73mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE H 4 1/2" (114mm) 3 1/4" (83mm) 4 5/8" (16mm) 11/16" (14mm) 2 1/4" (57mm) 1/16" (2mm)

ANSI 125/150 3 7/8" (98mm) 2 3/4" (70mm) 4 1/2" (13mm) 5/8" (16mm) 1 11/16" (43mm) 1/16" (2mm)

ANSI 300 4 5/8" (117mm) 3 1/4" (83mm) 4 5/8" (16mm) 3/4" (19mm) 1 11/16" (43mm) 1/16" (2mm)
FLANGE DIMENSIONS

1" NB (DN25) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

1" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 100mm 75mm 4 M10 11mm 60mm 2mm

PN10 115mm 85mm 4 M12 14mm 68mm 2mm

PN16 115mm 85mm 4 M12 14mm 68mm 2mm

PN25 115mm 85mm 4 M12 14mm 68mm 2mm

PN40 115mm 85mm 4 M12 14mm 68mm 2mm

PN64 140mm 100mm 4 M16 18mm 68mm 2mm

TABLE D 4 1/2" (114mm) 3 1/4" (83mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE E 4 1/2" (114mm) 3 1/4" (83mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE F 4 3/4" (121mm) 3 7/16" (87mm) 4 5/8" (16mm) 11/16" (17mm) 2 1/2" (64mm) 1/16" (2mm)

TABLE H 4 3/4" (121mm) 3 7/16" (87mm) 4 5/8" (16mm) 11/16" (17mm) 2 1/2" (64mm) 1/16" (2mm)

ANSI 125/150 4 1/4" (108mm) 3 1/8" (79mm) 4 1/2" (13mm) 5/8" (16mm) 2" (51mm) 1/16" (2mm)

ANSI 300 4 7/8" (124mm) 3 1/2" (89mm) 4 5/8" (16mm) 3/4" (19mm) 2" (51mm) 1/16" (2mm)
FLANGE DIMENSIONS

1 1/4" NB (DN32) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

1 1/4" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 120mm 90mm 4 M12 14mm 70mm 2mm

PN10 140mm 100mm 4 M16 18mm 78mm 2mm

PN16 140mm 100mm 4 M16 18mm 78mm 2mm

PN25 140mm 100mm 4 M16 18mm 78mm 2mm

PN40 140mm 100mm 4 M16 18mm 78mm 2mm

PN64 155mm 110mm 4 M20 22mm 78mm 2mm

TABLE D 4 3/4" (121mm) 3 7/16" (87mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE E 4 3/4" (121mm) 3 7/16" (87mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE F 5 1/4" (133mm) 3 7/8" (98mm) 4 5/8" (16mm) 11/16" (17mm)

TABLE H 5 1/4" (133mm) 3 7/8" (98mm) 4 5/8" (16mm) 11/16" (17mm) 3" (76mm) 1/16" (2mm)

ANSI 125/150 4 5/8" (117mm) 3 1/2" (89mm) 4 1/2" (13mm) 5/8" (16mm) 2 1/2" (64mm) 1/16" (2mm)

ANSI 300 5 1/4" (133mm) 3 7/8" (98mm) 4 5/8" (16mm) 3/4" (19mm) 2 1/2" (64mm) 1/16" (2mm)
FLANGE DIMENSIONS

1 1/2" NB (DN40) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

1 1/2" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 130mm 100mm 4 M12 14mm 80mm 3mm

PN10 150mm 110mm 4 M16 18mm 88mm 3mm

PN16 150mm 110mm 4 M16 18mm 88mm 3mm

PN25 150mm 110mm 4 M16 18mm 88mm 3mm

PN40 150mm 110mm 4 M16 18mm 88mm 3mm

PN64 170mm 125mm 4 M20 22mm 88mm 3mm

TABLE D 5 1/4" (133mm) 3 7/8" (98mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE E 5 1/4" (133mm) 3 7/8" (98mm) 4 1/2" (13mm) 9/16" (14mm)

TABLE F 5 1/2" (140mm) 4 1/8" (105mm) 4 5/8" (16mm) 11/16" (17mm)

TABLE H 5 1/2" (140mm) 4 1/8" (105mm) 4 5/8" (16mm) 11/16" (17mm) 3 1/4" (83mm) 1/16" (2mm)

ANSI 125/150 5" (127mm) 3 7/8" (98mm) 4 1/2" (13mm) 5/8" (16mm) 2 7/8" (73mm) 1/16" (2mm)

ANSI 300 6 1/8" (156mm) 4 1/4" (114mm) 4 3/4" (19mm) 7/8" (22mm) 2 7/8" (73mm) 1/16" (2mm)
FLANGE DIMENSIONS

2" NB (DN50) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

2" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 140mm 110mm 4 M12 14mm 90mm 3mm

PN10 165mm 125mm 4 M16 18mm 102mm 3mm

PN16 165mm 125mm 4 M16 18mm 102mm 3mm

PN25 165mm 125mm 4 M16 18mm 102mm 3mm

PN40 165mm 125mm 4 M16 18mm 102mm 3mm

PN64 180mm 135mm 4 M20 22mm 102mm 3mm

TABLE D 6" (152mm) 4 1/2" (114mm) 4 5/8" (16mm) 11/16" (17mm)

TABLE E 6" (152mm) 4 1/2" (114mm) 4 5/8" (16mm) 11/16" (17mm)

TABLE F 6 1/2" (165mm) 5" (127mm) 4 5/8" (16mm) 11/16" (17mm)

TABLE H 6 1/2" (165mm) 5" (127mm) 4 5/8" (16mm) 11/16" (17mm) 4" (102mm) 1/16" (2mm)

ANSI 125/150 6" (152mm) 4 3/4" (121mm) 4 5/8" (16mm) 3/4" (19mm) 3 5/8" (92mm) 1/16" (2mm)

ANSI 300 6 1/2" (165mm) 5" (127mm) 4 5/8" (16mm) 3/4" (19mm) 3 5/8" (92mm) 1/16" (2mm)
FLANGE DIMENSIONS

2 1/2" NB (DN65) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

2 1/2" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 160mm 130mm 4 M14 14mm 110mm 3mm

PN10 185mm 145mm 4 M18 18mm 122mm 3mm

PN16 185mm 145mm 4 M18 18mm 122mm 3mm

PN25 185mm 145mm 8 M18 18mm 122mm 3mm

PN40 185mm 145mm 8 M18 18mm 122mm 3mm

PN64 205mm 160mm 8 M22 22mm 122mm 3mm

TABLE D 6 1/2" (165mm) 5" (127mm) 4 5/8" (16mm) 11/16" (17mm)

TABLE E 6 1/2" (165mm) 5" (127mm) 4 5/8" (16mm) 11/16" (17mm)

TABLE F 7 1/4" (184mm) 5 3/4" (146mm) 8 5/8" (16mm) 11/16" (17mm)

TABLE H 7 1/4" (184mm) 5 3/4" (146mm) 8 5/8" (16mm) 11/16" (17mm) 4 1/2" (114mm) 1/16" (2mm)

ANSI 125/150 7" (178mm) 5 1/2" (140mm) 4 5/8" (16mm) 3/4" (19mm) 4 1/8" (105mm) 1/16" (2mm)

ANSI 300 7 1/2" (191mm) 5 7/8" (149mm) 8 3/4" (19mm) 7/8" (22mm) 4 1/8" (105mm) 1/16" (2mm)
FLANGE DIMENSIONS

3" NB (DN80) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

3" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 190mm 150mm 4 M16 18mm 128mm 3mm

PN10 200mm 160mm 8 M16 18mm 138mm 3mm

PN16 200mm 160mm 8 M16 18mm 138mm 3mm

PN25 200mm 160mm 8 M16 18mm 138mm 3mm

PN40 200mm 160mm 8 M16 18mm 138mm 3mm

PN64 215mm 170mm 8 M20 22mm 138mm 3mm

TABLE D 7 1/4" (184mm) 5 3/4" (146mm) 4 5/8" (16mm) 11/16" (17mm)

TABLE E 7 1/4" (184mm) 5 3/4" (146mm) 4 5/8" (16mm) 11/16" (17mm)

TABLE F 8" (203mm) 6 1/2" (165mm) 8 5/8" (16mm) 11/16" (17mm)

TABLE H 8" (203mm) 6 1/2" (165mm) 8 5/8" (16mm) 11/16" (17mm) 5" (127mm) 1/16" (2mm)

ANSI 125/150 7 1/2" (191mm) 6" (152mm) 4 5/8" (16mm) 3/4" (19mm) 5" (127mm) 1/16" (2mm)

ANSI 300 8 1/4" (210mm) 6 5/6" (168mm) 8 3/4" (19mm) 7/8" (22mm) 5" (127mm) 1/16" (2mm)
FLANGE DIMENSIONS

4" NB (DN100) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

4" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 210mm 170mm 4 M16 18mm 148mm 3mm

PN10 220mm 180mm 8 M16 18mm 158mm 3mm

PN16 220mm 180mm 8 M16 18mm 158mm 3mm

PN25 235mm 190mm 8 M20 22mm 162mm 3mm

PN40 235mm 190mm 8 M20 22mm 162mm 3mm

PN64 250mm 200mm 8 M24 26mm 162mm 3mm

TABLE D 8 1/2" (216mm) 7" (178mm) 4 5/8" (16mm) 11/16" (17mm)

TABLE E 8 1/2" (216mm) 7" (178mm) 8 5/8" (16mm) 11/16" (17mm)

TABLE F 9" (229mm) 7 1/2" (191mm) 8 5/8" (16mm) 11/16" (17mm)

TABLE H 9" (229mm) 7 1/2" (191mm) 8 5/8" (16mm) 11/16" (17mm) 6" (152mm) 1/16" (2mm)

ANSI 125/150 9" (229mm) 7 1/2" (191mm) 8 5/8" (16mm) 3/4" (19mm) 6 3/16" (157mm) 1/16" (2mm)

ANSI 300 10" (254mm) 7 7/8" (200mm) 8 3/4" (19mm) 7/8" (22mm) 6 3/16" (157mm) 1/16" (2mm)
FLANGE DIMENSIONS

5" NB (DN125) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

5" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 240mm 200mm 4 M16 18mm 178mm 3mm

PN10 250mm 210mm 8 M16 18mm 188mm 3mm

PN16 250mm 210mm 8 M16 18mm 188mm 3mm

PN25 270mm 220mm 8 M24 26mm 188mm 3mm

PN40 270mm 220mm 8 M24 26mm 188mm 3mm

PN64 295mm 240mm 8 M27 30mm 188mm 3mm

TABLE D 10" (254mm) 8 1/4" (210mm) 8 5/8" (16mm) 11/16" (17mm)

TABLE E 10" (254mm) 8 1/4" (210mm) 8 5/8" (16mm) 11/16" (17mm)

TABLE F 11" (279mm) 9 1/4" (235mm) 8 3/4" (19mm) 7/8" (22mm)

TABLE H 11" (279mm) 9 1/4" (235mm) 8 3/4" (19mm) 7/8" (22mm) 7" (178mm) 1/16" (2mm)

ANSI 125/150 10" (254mm) 8 1/2" (216mm) 8 3/4" (19mm) 7/8" (22mm) 7 5/16" (186mm) 1/16" (2mm)

ANSI 300 11" (279mm) 9 1/4" (235mm) 8 3/4" (19mm) 7/8" (22mm) 7 5/16" (186mm) 1/16" (2mm)
FLANGE DIMENSIONS

6" NB (DN150) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

6" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 265mm 225mm 8 M16 18mm 202mm 3mm

PN10 285mm 240mm 8 M20 22mm 212mm 3mm

PN16 285mm 240mm 8 M20 22mm 212mm 3mm

PN25 300mm 250mm 8 M24 26mm 218mm 3mm

PN40 300mm 250mm 8 M24 26mm 218mm 3mm

PN64 345mm 280mm 8 M30 33mm 218mm 3mm

TABLE D 11" (279mm) 9 1/4" (235mm) 8 5/8" (16mm) 11/16" (17mm)

TABLE E 11" (279mm) 9 1/4" (235mm) 8 3/4" (19mm) 7/8" (22mm)

TABLE F 12" (305mm) 10 1/4" (260mm) 12 3/4" (19mm) 7/8" (22mm)

TABLE H 12" (305mm) 10 1/4" (260mm) 12 3/4" (19mm) 7/8" (22mm) 2 1/4" (57mm) 1/16" (2mm)

ANSI 125/150 11" (279mm) 9 1/2" (241mm) 8 3/4" (19mm) 7/8" (22mm) 8 1/2" (216mm) 1/16" (2mm)

ANSI 300 12 1/2" (318mm) 10 5/8" (270mm) 12 3/4" (19mm) 7/8" (22mm) 8 1/2" (216mm) 1/16" (2mm)
FLANGE DIMENSIONS

8" NB (DN200) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

8" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 320mm 280mm 8 M16 18mm 258mm 3mm

PN10 340mm 295mm 8 M20 22mm 268mm 3mm

PN16 340mm 295mm 12 M20 22mm 268mm 3mm

PN25 360mm 310mm 12 M24 26mm 278mm 3mm

PN40 375mm 320mm 12 M27 30mm 285mm 3mm

PN64 415mm 345mm 12 M33 36mm 285mm 3mm

TABLE D 13 1/4" (337mm) 11 1/2" (292mm) 8 5/8" (16mm) 11/16" (17mm)

TABLE E 13 1/4" (337mm) 11 1/2" (292mm) 8 3/4" (19mm) 7/8" (22mm)

TABLE F 14 1/2" (368mm) 12 3/4" (324mm) 12 3/4" (19mm) 7/8" (22mm)

TABLE H 14 1/2" (368mm) 12 3/4" (324mm) 12 3/4" (19mm) 7/8" (22mm) 10 1/4" (260mm) 1/16" (2mm)

ANSI 125/150 13 1/2" (343mm) 11 3/4" (298mm) 8 3/4" (19mm) 7/8" (22mm) 10 5/8" (270mm) 1/16" (2mm)

ANSI 300 15" (381mm) 13" (330mm) 12 7/8" (22mm) 1" (15mm) 10 5/8" (270mm) 1/16" (2mm)
FLANGE DIMENSIONS

10" NB (DN250) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

10" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 375mm 335mm 12 M16 18mm 312mm 3mm

PN10 395mm 350mm 12 M20 22mm 320mm 3mm

PN16 405mm 355mm 12 M24 26mm 320mm 3mm

PN25 425mm 370mm 12 M27 30mm 335mm 3mm

PN40 450mm 385mm 12 M30 33mm 345mm 3mm

PN64 470mm 400mm 12 M33 36mm 345mm 3mm

TABLE D 16" (406mm) 14" (356mm) 8 3/4" (19mm) 7/8" (22mm)

TABLE E 16" (406mm) 14" (356mm) 12 3/4" (19mm) 7/8" (22mm)

TABLE F 17" (432mm) 15" (381mm) 12 7/8" (22mm) 1" (25mm)

TABLE H 17" (432mm) 15" (381mm) 12 7/8" (22mm) 1" (25mm) 12 1/4" (311mm) 1/16" (2mm)

ANSI 125/150 16" (406mm) 14 1/4" (362mm) 12 7/8" (22mm) 1" (25mm) 12 3/4" (324mm) 1/16" (2mm)

ANSI 300 17 1/2" (445mm) 15 1/4" (387mm) 16 1" (25mm) 1 1/8" (29mm) 12 3/4" (324mm) 1/16" (2mm)
FLANGE DIMENSIONS

12" NB (DN300) FLANGE TABLE

FLANGE NO. OF DIAMETER OF DIAMETER OF DIAMETER OF HEIGHT OF

12" PCD
DIAMETER BOLT HOLES BOLTS HOLES RAISED FACE RAISED FACE

PN6 440mm 395mm 12 M20 22mm 365mm 4mm

PN10 445mm 400mm 12 M20 22mm 370mm 4mm

PN16 460mm 410mm 12 M24 26mm 378mm 4mm

PN25 485mm 430mm 16 M27 30mm 395mm 4mm

PN40 515mm 450mm 16 M30 33mm 410mm 4mm

PN64 530mm 460mm 16 M33 36mm 410mm 4mm

TABLE D 18" (457mm) 16" (406mm) 12 3/4" (19mm) 7/8" (22mm)

TABLE E 18" (457mm) 16" (406mm) 12 7/8" (22mm) 1" (25mm)

TABLE F 19 1/4" (489mm) 17 1/4" (438mm) 16 7/8" (22mm) 1" (25mm)

TABLE H 19 1/4" (489mm) 17 1/4" (438mm) 16 7/8" (22mm) 1" (25mm) 14 1/4" (362mm) 1/16" (2mm)

ANSI 125/150 19" (483mm) 17" (432mm) 12 7/8" (22mm) 1" (25mm) 15" (381mm) 1/16" (2mm)

ANSI 300 20 1/2" (521mm) 17 3/4" (451mm) 16 1 1/8" (29mm) 1 1/4" (32mm) 15" (381mm) 1/16" (2mm)
PRESSURE RATINGS IN PSI

BS10 IMPERIAL FLANGES

FLANGE 0°F TO 450°F 500°F 600°F 700°F 800°F 850°F 900°F MAX HYDRAULIC
TABLE -18°C TO 230°C 260°C 3 1 5° C 370°C 3 7 0° C 4 5 0° C 4 8 0° C TEST PRESSURE

TABLE D 100 95 80 65 50 150

TABLE E 200 185 155 130 100 300

TABLE F 300 280 235 195 150 450

TABLE H 500 465 395 320 250 180 115 750

TABLE J 700 650 550 450 350 255 160 1050

TABLE K 900 835 705 580 450 325 205 1350

TABLE R 1200 1115 945 770 600 435 275 1800

TABLE S 1800 1670 1415 1155 900 655 415 2700

TABLE T 2800 2600 2200 1800 1400 1025 645 4200

PRESSURE RATING (PN):

Where PN stands for Pressure Nominale and prefixes the pressure rating.
For example a PN16 flange is designed to operate up to 16 bar and typical ratings include PN6, PN10, PN16, PN25, PN40, PN64, PN100.
The American ANSI standard refers instead to a pressure/temperature rating termed "Class" I.e. ANSI 150.

* Please note that the following flange tables are provided as a guide only, we cannot accept responsibility for any errors that may have been included.
PRESSURE RATINGS IN BAR

BS4504 METRIC FLANGES

FLANGE
-10°C TO 200°C 200°C 3 0 0° C 3 50 ° C 4 0 0° C 4 2 5° C 4 5 0° C 475°C
TABLE

TABLE 6 6 5.5 5

TABLE 10 10 9 8 7 6

TABLE 16 16 15 13 11 9

TABLE 25 25 24 21 17 14 12 9 6

TABLE 40 40 38 33 28 23 20 15 10

TABLE 64 64 61 53 44 36 32 24 16

TABLE 100 100 95 83 70 57 50 37 25

TABLE 160 160 152 132 112 92 80 60 40

* Please note that the following flange tables are provided as a guide only, we cannot accept responsibility for any errors that may have been included.
GASKET MATERIALS

EDPM NEOPRENE BUTYL

Suitable for: Suitable for: Suitable for:
Hydraulic fluids, ketones, hot and cold Weathering resistance, ozone, low gas Ozone, weathering, general chemical
water, and alkalis, heat, ozone and permeability, seawater applications. resistance, low gas & moisture
weather resistance. permeability.
Not suitable for:
Not suitable for: Low temperature operations. Not suitable for:
Oils, gasoline, kerosene, aromatic and Oils, fuels and fats.
aliphatic hydrocarbons, halogenated Temperature range: -20°C to +100°C.
solvents and concentrated acids. Temperature range: -40°C to +100°C.

Temperature range: -40°C to +120°C. VITON

Suitable for:
NATURAL RUBBER NBR NITRILE High temperature solvents, oils.
Suitable for: Suitable for:
Acids & bases, abrasion resistance. Oils, hot oils, animal fats, acids & bases, Not suitable for:
heat and resistance to abrasion, gas. Acetone, esters, ketones, low
Not suitable for: temperature applications or steam.
Oils, oxidising agents, aromatics, Not suitable for:
hydrocarbons, sunlight, ozone and Ozone, sunlight or weather resistance. Temperature range: -10°C to +250°C.
oxygen.
Temperature range: -20°C to +110°C. SILICONE
Temperature range: -40°C to +80°C. Suitable for:
High and low temperatures, electrically
insulating.

Temperature range: -60°C to +220°C.

PVC FLANGES

In Europe, the drilling will be generally either PN6, PN10 or PN16. If it is an old piece of equipment, you are connecting the plastic pipe to a pump or filter,
therefore, the flange may be a BS10 drilling. However, if it is an imported piece of equipment from another country like America, the drilling could well be
ASA150 (or ANSI). A good idea is to measure the PCD and look it up on the flange drilling tables below.

PIPE SIZE PN6 DRILLING PIPE SIZE PN10 DRILLING PIPE SIZE PN16 DRILLING

PCD BOLT NO. OF PCD BOLT NO. OF PCD BOLT NO. OF

INCH METRIC INCH METRIC INCH METRIC
MM DIAMETER BOLTS MM DIAMETER BOLTS MM DIAMETER BOLTS

1/2" 20 55 M10 4 1/2" 20 65 M12 4 1/2" 20 65 M12 4

3/4" 25 65 M10 4 3/4" 25 75 M12 4 3/4" 25 75 M12 4

1" 32 75 M10 4 1" 32 85 M12 4 1" 32 85 M16 4

1 1/4" 40 90 M12 4 1 1/4" 40 100 M16 4 1 1/4" 40 100 M16 4

1 1/2" 50 100 M12 4 1 1/2" 50 110 M16 4 1 1/2" 50 110 M16 4

2" 63 110 M12 4 2" 63 125 M16 4 2" 63 125 M16 4

2 1/2" 75 130 M12 4 2 1/2" 75 145 M16 4 2 1/2" 75 145 M16 4

3" 90 150 M16 4 3" 90 160 M16 8 3" 90 160 M16 8

4" 110 170 M16 4 4" 110 180 M16 8 4" 110 180 M16 8

5" 140 200 M16 8 5" 140 210 M16 8 5" 140 210 M16 8

6" 160 225 M16 8 6" 160 240 M20 8 6" 160 240 M20 8

8" 200 280 M16 8 8" 200 295 M20 8 8" 200 295 M20 12

10" 280 335 M16 12 10" 280 350 M20 12 10" 280 350 M20 12

NOTE:
PVC FLANGES

PIPE SIZE ASA 150 DRILLING PIPE SIZE BS10 TABLE D/E DRILLING

PCD BOLT NO. OF PCD BOLT NO. OF

INCH Please note that the drilling must be the same on INCH
MM DIAMETER BOLTS MM DIAMETER BOLTS
both flanges, if not, the bolt holes won't line up and
1/2" 60 M12 4 you won't be able to connect them. 1/2" 67 M12 4

3/4" 70 M12 4 3/4" 73 M12 4

Once you have your PCD measurement, check it up
1" 80 M12 4 in the tables to determine the drilling standard. 1" 83 M12 4

1 1/4" 90 M12 4 1 1/4" 87 M12 4

Please note: PN10/16 - some flanges have both
1 1/2" 98 M16 4 PN10/16 written on them. These refer to the fact 1 1/2" 98 M16 4
that either PN10 or PN16 flanges will fit, because the
2" 121 M16 4 2" 114 M16 4
drillings for many sizes are the same.
2 1/2" 138 M16 4 2 1/2" 127 M16 4

3" 152 M16 4 3" 146 M16 4

4" 190 M16 8 4" (D) 178 M16 4

5" 216 M20 8 4" (E) 178 M16 8

6" 241 M20 8 5" 210 M16 8

8" 298 M20 8 6" 235 M16 8

10" 364 M24 12 8" 292 M16 8

10" 406 M20 8

NOTE:
 CONTACT
Innovation Centre Unit L3
Yelverton Business Park
Yelverton
Devon
PL20 7PY
United Kingdom

valvesonlineuk

valves-online-limited

@valvesonlineuk

Valves Online

@valvesonlineuk

sales@valvesonline.co.uk +44 (0) 1822 855 600 www.valvesonline.co.uk