Uni Mixer
Uni Mixer
EN
6 1
7 2
4 ! WARNING
Disconnect air supply from the agitator before
5
attempting any service or maintenance.
9
8
! WARNING
ENTANGLEMENT HAZARD!
9 Keep clear of paddles during operation.
Paddles are rotating and have sharp edges.
11 PARTS LIST
When ordering, please specify Part No.
10
12
ITEM PART QTY. QTY.
NO. NO. DESCRIPTION 202-55-2 202-55-4
18
! WARNING
Read the following warnings before using this equipment.
READ THE MANUAL PROJECTILE HAZARD
Before operating finishing equipment, read and understand all You may be injured by venting liquids or gases that are released
safety, operation and maintenance information provided in the under pressure, or flying debris.
operation manual.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE OPERATOR OF THE EQUIPMENT.
FOR FURTHER SAFETY INFORMATION REGARDING THIS EQUIPMENT, SEE THE GENERAL EQUIPMENT SAFETY BOOKLET (77-5300).
Binks reserves the right to modify equipment specification without prior notice.
Binks products are covered by Carlisle Fluid Technologies one year materials and workmanship
limited warranty. The use of any parts or accessories, from a source other than
Carlisle Fluid Technologies, will void all warranties. For specific warranty information please contact
the closest Carlisle Fluid Technologies location listed below.
Carlisle Fluid Technologies reserves the right to modify equipment specifications without prior notice.
DeVilbiss®, Ransburg®, ms®, BGK®, and Binks® are registered trademarks of Carlisle Fluid Technologies, Inc.
Binks is part of Carlisle Fluid Technologies, a global leader in innovative finishing technologies.
For technical assistance or to locate an authorized distributor, contact one of our international sales
and customer support locations.
Japan
overseas-sales@carlisleft.co.jp
Tel: +81 45 785 6421
Fax: +81 45 785 6517