Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Conrod

    Uploaded by

    Irwanto Manaf
    9 views4 pages
    This document provides specifications for connecting rods used in 3500 generator set engines, including part numbers, dimensions, and installation instructions. It lists 12 part numbers for connecting rods, with serial number ranges for each. It also includes two illustrations showing dimensions for installing the connecting rod bushing and piston pin. Tightening instructions are provided for installing the connecting rod bolts.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides specifications for connecting rods used in 3500 generator set engines, including part numbers, dimensions, and installation instructions. It lists 12 part numbers for connecting rods, with serial number ranges for each. It also includes two illustrations showing dimensions for installing the connecting rod bushing and piston pin. Tightening instructions are provided for installing the connecting rod bolts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    9 views4 pages

    Conrod

    Uploaded by

    Irwanto Manaf
    This document provides specifications for connecting rods used in 3500 generator set engines, including part numbers, dimensions, and installation instructions. It lists 12 part numbers for connecting rods, with serial number ranges for each. It also includes two illustrations showing dimensions for installing the connecting rod bushing and piston pin. Tightening instructions are provided for installing the connecting rod bolts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 4

    Previous Screen

    Welcome: j210hp9
    Product: GENERATOR SET
    Model: 3516 GENERATOR SET YAS00350
    Configuration: 3516 Generator Set YAS00001-UP

    Specifications
    3500 Generator Set Engines
    Media Number -RENR5052-05 Publication Date -01/04/2013 Date Updated -18/04/2013

    i07729675

    Connecting Rod
    SMCS - 1218

    Part Number - 144-0275


    S/N - ZAF1-UP

    Part Number - 144-0275


    S/N - YAK1-UP

    Part Number - 144-0275


    S/N - YBS1-UP

    Part Number - 144-0725


    S/N - JM21-UP

    Part Number - 144-0275


    S/N - YAL1-UP

    Part Number - 144-0275


    S/N - ZAL1-UP

    Part Number - 144-0275


    S/N - YAS1-UP

    Part Number - 144-0275


    S/N - YAX1-UP

    Part Number - 144-0275


    S/N - YBA1-UP

    Part Number - 144-0275


    S/N - JCW1-UP

    Part Number - 144-0725


    S/N - ZAB1-UP

    Part Number - 144-0725


    S/N - JCG1-UP
    Part Number - 144-0275
    S/N - ZBL1-UP

    Illustration 1 g06413299
    Illustration 2 g06412885
    Section A-A
    Tightening sequence

    Table 1
    Item Qty Part Specification Description
    Angle above the centerline on either side of the bearing joint for the sleeve bearing
    D1 - -
    for the piston pin is 10 degrees.

    The connecting rod may be heated from 175 to 260 °C (347 to 500 °F) for the
    D2 - - installation of the bushing for the piston pin. Minimum length for heating the
    connecting rod is 105 mm (4.1 inch). Do not use a torch to heat the connecting rod.
    Thoroughly lubricate the piston pin with clean engine oil prior to assembly of the
    piston and the connecting rod.
    118-
    Bore in the bushing for the piston pin after installation of the bushing is
    D3 1 1655
    70.000 ± 0.008 mm (2.7559 ± 0.0003 inch).
    Bushing
    Bore in the connecting rod for the bushing is 75.760 ± 0.015 mm
    (2.9827 ± 0.0006 inch).
    D4 - - Distance between the center of the bearings is 380 mm (14.961 inch).

    7N-2043 Protrusion of the dowel from the connecting rod cap is 4.0 ± 0.5 mm
    D5 1
    Dowel (0.16 ± 0.02 inch).

    Bore in the connecting rod for the bearing for the crankshaft connecting rod journal
    D6 - - after applying final torque to the connecting rod bolts is 143.028 ± 0.015 mm
    (5.6310 ± 0.0006 inch).

    Etch the cylinder number on the connecting rod and the cap in this location. Mark
    1 - - the connecting rod and the cap with numbers. Mark the numbers on the same side
    of the connecting rod as the bearing retainer notch.

    2 - - Location pin for correct installation of connecting rod caps.


    The chamfer side must be next to the crank pin thrust surface when the connecting
    3 - -
    rod and piston group is assembled in the engine.
    4 4 7N-2405 Use the following procedure for tightening the connecting rod bolts:
    Bolt Bolt 1 and bolt 2 must be on the same end of the connecting rod cap that has
    bearing tabs and location pin (2).
    1. Before assembly, apply Bel-Ray Molylube 67700 on the bolt threads, the bolt
    shank, and the bolt seat.
    2. Sequentially tighten the bolt 1 and bolt 2 to 90 ± 5 N·m (66 ± 4 lb ft).
    3. Sequentially tighten the bolt 3 and bolt 4 to 90 ± 5 N·m (66 ± 4 lb ft).
    4. Again, sequentially tighten the bolt 3 and bolt 4 to 90 ± 5 N·m (66 ± 4 lb ft).
    5. Tighten each bolt for an additional 90 ± 5 degrees.
    Side clearance between two connecting rods on the same new crankshaft pin is 0.850 ± 0.332 mm
    (0.0335 ± 0.0131 inch).

    Copyright 1993 - 2019 Caterpillar Inc. Mon Dec 09 2019 14:47:18 GMT+0800 (Central Indonesia Time)
    All Rights Reserved.
    j210hp9
    Private Network For SIS Licensees.

    You might also like