Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    TLL140 Datasheet

    Uploaded by

    ayda atalan
    The T/LL140 series fuel level sensor is a SAE 5 hole mounted sensor that continuously measures the contents of a fuel tank. It provides a variable resistive or voltage output and can be cut to length and recalibrated by the end user. The sensor also includes a low level alarm that switches when fuel drops below a predetermined level. It is made of materials suitable for diesel, biodiesel, kerosene and petrol with dimensions from 200-1100mm and mounts in a SAE 5 hole.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TLL140 Datasheet

    Uploaded by

    ayda atalan
    10 views1 page
    The T/LL140 series fuel level sensor is a SAE 5 hole mounted sensor that continuously measures the contents of a fuel tank. It provides a variable resistive or voltage output and can be cut to length and recalibrated by the end user. The sensor also includes a low level alarm that switches when fuel drops below a predetermined level. It is made of materials suitable for diesel, biodiesel, kerosene and petrol with dimensions from 200-1100mm and mounts in a SAE 5 hole.

    Original Title

    TLL140-Datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The T/LL140 series fuel level sensor is a SAE 5 hole mounted sensor that continuously measures the contents of a fuel tank. It provides a variable resistive or voltage output and can be cut to length and recalibrated by the end user. The sensor also includes a low level alarm that switches when fuel drops below a predetermined level. It is made of materials suitable for diesel, biodiesel, kerosene and petrol with dimensions from 200-1100mm and mounts in a SAE 5 hole.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    10 views1 page

    TLL140 Datasheet

    Uploaded by

    ayda atalan
    The T/LL140 series fuel level sensor is a SAE 5 hole mounted sensor that continuously measures the contents of a fuel tank. It provides a variable resistive or voltage output and can be cut to length and recalibrated by the end user. The sensor also includes a low level alarm that switches when fuel drops below a predetermined level. It is made of materials suitable for diesel, biodiesel, kerosene and petrol with dimensions from 200-1100mm and mounts in a SAE 5 hole.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    T/LL140 Series Fuel Level Sensor

    The T/LL140 series is a range of SAE 5 Hole mounted sensors for continuously measuring the
    contents of a fuel tank providing a factory set variable resistive or voltage output.

    The T/LL140 can be cut to length* and be recalibrated by the end user.

    A low level alarm switches when the fuel drops below a predetermined level.

    *Contact Rochester Sensors for shortening kit availability.

    SPECIFICATION

    Liquid Types
    Liquids compatible with construction materials, typically diesel, biodiesel, kerosene, petrol.
    Not suitable for fuels with a high dielectric constant.
    Dimensions
    Probe length: Min. 200 mm, max. 1100 mm.
    Ensure probe end is above any contaminants.
    Mounting: SAE 5 Hole.

    Electrical
    Supply voltage: 10-32 VDC.
    Supply current: 28 mA@12 VDC + output load.
    Supply protection: Over-voltage 80 VDC for 2 minutes. Reverse polarity.
    Signal output: Resistance range: 0-250 Ω or 250-0 Ω.
    Voltage Range: 0-5 VDC or 5-0 VDC, 20 mV steps, Max 10 mA source.
    Alarm: Switch to ground. Max 100 mA.
    Default setting 12.5% of full level.
    Minimum 30 mm from sensor end.
    Maximum 20 mm from full level.
    Connections: 500 mm long, 24 AWG flying leads. Optionally fitted with any suitable
    connector.
    Performance
    Accuracy: ±3.0% of depth @ 20 ºC (+68 ºF).

    Materials
    Enclosure: 30% glass filled nylon.
    Enclosure bush: Polypropylene.
    Internal electrode: Aluminium.
    Sensor tube: 316 stainless steel.
    Internal spacers: Polypropylene. Model Output
    End plug: PTFE.
    T/LL140 Resistive
    Wetted seals: Viton (FKM) & nitrile.
    T/LL141 Voltage
    Gasket: Nitrile.
    Cable: Polyurethane.
    Wire Colours
    Environmental Ratings
    Sealing: IP67 (Assuming suitably sealed cable breakout). Red: V+ (Supply)
    Operating temp: -20 ºC to +85 ºC. Green: V- (Ground)
    Shock: 50 g, 6.3 ms. Yellow: Alarm
    Vibration: 9.7 Grms BS EN 60068-2-64:1993. Blue: Signal out (V)
    Weight: 300 g (1 m long sensor). Black: Signal out (Ω)
    White: Calibration

    8.6/34 Rev 3

    E. & O. E. © Rochester Sensors UK Limited.


    Since the suitability of these products depends upon a wide range of factors not in our control, Rochester Sensors UK Limited expects and understands that you will
    conduct the testing and evaluation necessary to determine that these products are suitable for your application. Whilst every effort is made to ensure the above details
    are correct at the time of printing, Rochester Sensors UK Limited reserves the right to make material changes, and or technical changes without notification.

    You might also like