Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
26 views1 page

Table 500-18. Composition of Bituminous Concrete Pavement Layers

Uploaded by

shashidharnalumachu

The document provides tables of composition requirements for two types of bituminous concrete pavement layers. Table 500-18 specifies nominal aggregate size, layer thickness, sieve sizes and percentages, and bitumen content. Table 500-19 gives requirements for stability, flow, compaction level, voids, and loss of stability.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

Table 500-18. Composition of Bituminous Concrete Pavement Layers

Uploaded by

shashidharnalumachu
26 views1 page
The document provides tables of composition requirements for two types of bituminous concrete pavement layers. Table 500-18 specifies nominal aggregate size, layer thickness, sieve sizes and percentages, and bitumen content. Table 500-19 gives requirements for stability, flow, compaction level, voids, and loss of stability.

Original Description:

Section 500 Table of MoRTH for BC

Original Title

BC.

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

The document provides tables of composition requirements for two types of bituminous concrete pavement layers. Table 500-18 specifies nominal aggregate size, layer thickness, sieve sizes and percentages, and bitumen content. Table 500-19 gives requirements for stability, flow, compaction level, voids, and loss of stability.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
26 views1 page

Table 500-18. Composition of Bituminous Concrete Pavement Layers

Uploaded by

shashidharnalumachu
The document provides tables of composition requirements for two types of bituminous concrete pavement layers. Table 500-18 specifies nominal aggregate size, layer thickness, sieve sizes and percentages, and bitumen content. Table 500-19 gives requirements for stability, flow, compaction level, voids, and loss of stability.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 1

Base and Surface Courses (Bituminous) Section 500

TABLE 500-18. COMPOSITION OF BITUMINOUS CONCRETE


PAVEMENT LAYERS

Grading 1 2
Nominal aggregate size 19 mm 13 mm
Layer Thickness 50 – 65 mm 30 – 45 mm
1
IS Sieve (mm) Cumulative % by weight of total aggregate passing
45 - -
37.5 - -
26.5 100 -
19 79 – 100 100
13.2 59 – 79 79 – 100
9.5 52 – 72 70 – 88
4.75 35 – 55 53 – 71
2.36 28 – 44 42 – 58
1.18 20 – 34 34 – 48
0.6 15 – 27 26 – 38
0.3 10 – 20 18 – 28
0.15 5 – 13 12 – 20
0.075 2–8 4 – 10
Bitumen content % by
5.0 – 6.0 5.0 – 7.0
mass of total mix2
Bitumen grade (pen) 65 65
Notes: 1. The combined aggregate grading shall not vary from the low limit on
one sieve to the high limit on the adjacent sieve.

2. Determined by the Marshall method.

TABLE 500-19. REQUIREMENTS FOR BITUMINOUS PAVEMENT LAYERS


Minimum stability (kN at 600C) 9.0
Minimum flow (mm) 2
Maximum flow (mm) 4
75 blows on each of the two
Compaction level (Number of blows)
faces of the specimen
Per cent air voids 3–6
Per cent voids in mineral aggregate (VMA) See Table 500-12
Per cent voids filled with bitumen (VFB) 65 – 75
Loss of stability on immersion in water at 600C Min. 75 per cent retained
(ASTM D 1075) strength

40

You might also like