This document provides information about the steel grade S235JR including its general information, chemical composition, mechanical properties, transformation temperatures, other properties, and contact details. S235JR is a soft structural steel that is easy to weld and bend and has various applications.
This document provides information about the steel grade S235JR including its general information, chemical composition, mechanical properties, transformation temperatures, other properties, and contact details. S235JR is a soft structural steel that is easy to weld and bend and has various applications.
This document provides information about the steel grade S235JR including its general information, chemical composition, mechanical properties, transformation temperatures, other properties, and contact details. S235JR is a soft structural steel that is easy to weld and bend and has various applications.
This document provides information about the steel grade S235JR including its general information, chemical composition, mechanical properties, transformation temperatures, other properties, and contact details. S235JR is a soft structural steel that is easy to weld and bend and has various applications.
Variants suitability for hot dip zinc coating according the classification in Table 1 EN 10025-2:2004: Class 1: Si max 0,030% and Si + 2,5 P max 0,090%. Class 2: Si max 0,035%. Class 3 Si 0,14...0,25% and P max 0,035%.
Similar designations SS 1312, S235JR, 1.0038, Fe 360 BFN, RSt37-2, 40 B, SB1312, IM2191
Chemical composition Variant Cast Weldability C% Mn % P% S% Cu % N% CEV max Min - - - - - - SB1312 Std Pcm max Max 0.17 1.40 0.040 0.040 - 0.0120 CEV 0.35max Min - - - - - - S235JR EN10025-2 (ref) Std Pcm 0.25max Max 0.17 1.40 0.035 0.035 0.55 0.0120
S235JR: C max 0,20 % for sizes over 40 mm. Only CEV required in standard Mechanical Properties Dimension Yield strength min Tensile strength Elongation A5 Impact (ISO-V) Variant Format Condition [mm] [MPa] [MPa] [%] strengthmin
All < 16 235* 360-510 26 20 °C 27 J (long) formats All 16.1 < 40 225* 360-510 26 20 °C 27 J (long) formats All 40.1 < 63 215* 360-510 25 20 °C 27 J (long) S235JR EN10025-2 formats +AR (ref) All 63.1 < 100 215* 360-510 24 20 °C 27 J (long) formats All 100.1 < 150 195* 350-500 22 20 °C 27 J (long) formats All 150.1 < 200 185* 340-490 21 20 °C 27 J (long) formats Rp0.2 * Reh, ** Re l
Transformation temperatures Temperature °C MS 485 AC1 725 AC3 863 Other properties (typical values) Youngs module (GPa) Poisson´s ratio (-) Shear module (GPa) Density (kg/m3) 210 0.3 80 7800 Average CTE 20-300°C Specific heat Thermal conductivity Ambient Electrical resistivityAmbient (µm/m°K) capacity 50/100°C (J/kg°K) temperature (W/m°K) temperature (µΩm) 12 460 - 480 40 - 45 0.20 - 0.25
Contact us Would you like to know more about our offers? Don´t hesitate to contact us:
Via e-mail: info@ovako.com
Via telephone: +46 8 622 1300
For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/
Disclaimer The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a warranty or a guarantee. The suitability of a product for a specific application can be confirmed only by Ovako once given the actual conditions.The purchaser of an Ovako product has the responsibility to ascertain and control the applicability of the products before using them. Continuous development may necessitate changes in technical data without notice. This document is only valid for Ovako material. Other material, covering the same international specifications, does not necessarily comply with the properties presented in this document.
