Download as XLSX, PDF, TXT or read online from Scribd
Download as xlsx, pdf, or txt
You are on page 1/ 4
Daily Site Safety Activity Plan
Project Name- NXT BROOKFEILD
Sl.No Name of Activity Average Manpower location Hazard
involved
1. Fall of materials 2. Property/material damage 3. Excessive load loading and unloading 4. Physical injury(shoulder, 1 of materials manually 4 2c back, knee) 5. Dust hazard 6. Improper stacking of materials
1.Fall Hazards 2.Manual Handling Injuries 3 installation of AC Ducts 5 2C 3.Sharp Edges and Metalworking Hazards 4.Electrical Hazards 5.Confined Space Risks
Debris Removal
1. Injuries while manual handling
2.Ergonomic hazard while dumping debris manually into dumper 3.Slip-trip-fall while dumping 2 5 2c debris manually into dumper 4. Dust generation 5.Poor communication between dumper driver and worker 6. Improper PPEs 1. Injury due to fall of materials 2. Eyes injury due to grout or cement Civil Works (Brick 3. Skin disease due to cement 3 masonary, 6 2c etc. plastering,Curing ect.) 4. Slip/trip hazard due to slippery surface 5. Cut injury 6.fall from height
2. Well trained person to be assigned for the task 3. All required & proper PPE's to be provided. 4. Frequent break to be provided for rest 5. Materials to be stacked safely on designated area with barrications 6. Load to be divided for easy handling
1. Injuries/ sprains 2. Partial or permanent disabilities 3. Respiratory diseases 4. Financial loss
1.Fall Protection Systems
1.Working at heights during duct 2.Ergonomic Practices installation can leads to falls 3.Personal Protective Equipment 2.Lifting and maneuvering heavy 4.Tool Safety and Training duct components without proper 5.Electrical safety procedures ergonomics and lifting techniques 6.Confined Space Entry Protocols can result in musculoskeletal injuries among workers 3.Metal ducts often have sharp edges, and workers engaged in cutting, shaping, or assembling these components may be at risk of cuts, abrasions, or injuries from metalworking tools. 4.Electricians and technicians working on the electrical components of the system face the risk of electrical shocks
1.Personal Protective Equipment (PPE)
Property damage 2.Training and Education Personal injury 3.Safe Handling Procedures 4.Emergency Response Procedures 1. Efficient & continuous housekeeping to be provided 2. Training to be provided about safe work 3. Adequate PPE’s to be provided 4. Ensure all person should be vaccinated
1.Drilling and chipping processes can 1. Efficient & continuous housekeeping to be provided generate high levels of noise, leading 2. Training to be provided about safe work to potential hearing damage for workers 3. Adequate PPE’s to be provided 2.Prolonged use of drilling and 4.Engineering Controls chipping tools may expose workers to hand-arm issues 3.Drilling and chipping materials can produce airborne dust particles 4.Cable laying involves working with electrical components, posing a risk of electric shock
