Safety Data Sheet

Hempaguard X7 89909 Base

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by UK REACH Regulation SI 2019/758 - United Kingdom
(UK)
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
Product name : Hempaguard X7 89909 Base
Product identity : 8990919740, 00138822
Product type : Fouling defence coating

1.2 Relevant identified uses of the substance or mixture and uses advised against
Field of application : ships and shipyards
Ready-for-use mixture : 89900 = 89909 17.8 Ltr. / 98980 2.2 Ltr.
Identified uses : Industrial applications, Professional applications, Used by spraying.

1.3 Details of the supplier of the safety data sheet 1.4 Emergency telephone number
Company details : Hempel UK Ltd Emergency telephone number (with hours of operation)
Berwyn House, The Pavilions
Llantarnam Park UK: 01633 833600 (08.00 - 17.00)
Cwmbran Ireland: 01 809 2166 (National Poisons Information Centre,
South Wales NP44 3FD Monday-Sunday; 08:00-22:00)
Telephone: 01633 833600
hempel@hempel.com See Section 4 of the safety data sheet (first aid measures).

Date of issue : 17 January 2024

Date of previous issue : 9 May 2023.

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Product definition : Mixture
Classification according to UK CLP/GHS
Flam. Liq. 3, H226 FLAMMABLE LIQUIDS
Acute Tox. 3, H331 ACUTE TOXICITY (inhalation)
Skin Irrit. 2, H315 SKIN CORROSION/IRRITATION
Eye Dam. 1, H318 SERIOUS EYE DAMAGE/EYE IRRITATION
Aquatic Acute 1, H400 SHORT-TERM (ACUTE) AQUATIC HAZARD
Aquatic Chronic 1, H410 LONG-TERM (CHRONIC) AQUATIC HAZARD
See Section 11 for more detailed information on health effects and symptoms.

2.2 Label elements

Hazard pictograms :

Signal word : Danger

Hazard statements : H226 - Flammable liquid and vapour.
H315 - Causes skin irritation.
H318 - Causes serious eye damage.
H331 - Toxic if inhaled.
H410 - Very toxic to aquatic life with long lasting effects.
Precautionary statements :
Prevention : Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking. Avoid release to the environment.
Response : Collect spillage. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Hazardous ingredients : copper pyrithione
Special packaging requirements
Containers to be fitted with child- Not applicable.
resistant fastenings :

Version: 0.04 Page: 1/11

Safety Data Sheet
Hempaguard X7 89909 Base

SECTION 2: Hazards identification

Tactile warning of danger : Not applicable.

2.3 Other hazards

This mixture contains substances that are assessed to be a PBT or a vPvB, refer to Section 3.2.
Other hazards which do not result None known.
in classification :

SECTION 3: Composition/information on ingredients

3.2 Mixtures
Product/ingredient name Identifiers % GB CLP Classification Type

xylene REACH #: 01-2119488216-32 ≥10 - ≤21 Flam. Liq. 3, H226 [1] [2]
EC: 215-535-7 Acute Tox. 4, H312
CAS: 1330-20-7 Acute Tox. 4, H332
Index: 601-022-00-9 Skin Irrit. 2, H315
copper pyrithione EC: 238-984-0 ≤10 Acute Tox. 4, H302 [1] [2]
CAS: 14915-37-8 Acute Tox. 2, H330
Eye Dam. 1, H318
Aquatic Acute 1, H400 (M=100)
Aquatic Chronic 1, H410 (M=100)
ethylbenzene REACH #: 01-2119489370-35 ≤4.3 Flam. Liq. 2, H225 [1] [2]
EC: 202-849-4 Acute Tox. 4, H332
CAS: 100-41-4 STOT RE 2, H373 (hearing organs)
Index: 601-023-00-4 Asp. Tox. 1, H304
toluene REACH #: 01-2119471310-51 ≤0.3 Flam. Liq. 2, H225 [1] [2]
EC: 203-625-9 Skin Irrit. 2, H315
CAS: 108-88-3 Repr. 2, H361d
Index: 601-021-00-3 STOT SE 3, H336
STOT RE 2, H373
Asp. Tox. 1, H304
octamethylcyclotetrasiloxane REACH #: 01-2119529238-36 ≤0.1 Repr. 2, H361f [1] [3]
EC: 209-136-7 Aquatic Chronic 1, H410 (M=10) [4]
CAS: 556-67-2
Index: 014-018-00-1

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are
classified as hazardous to health or the environment and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit, see section 8.
[3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII
[4] Substance meets the criteria for vPvB according to Regulation (EC) No. 1907/2006, Annex XIII
Active substances
Product/ingredient name (% by weight)
copper pyrithione (8.2 % by weight)

SECTION 4: First aid measures

4.1 Description of first aid measures

General : In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth
to an unconscious person.
If breathing is irregular, drowsiness, loss of consciousness or cramps: Call 112 and give immediate
treatment (first aid).
Eye contact : Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 15
minutes, occasionally lifting the upper and lower eyelids. Seek immediate medical attention/advice.
Inhalation : Remove to fresh air and keep at rest in a position comfortable for breathing. Give nothing by mouth. If
not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or
oxygen by trained personnel. If unconscious, place in recovery position and get medical attention
immediately.
Skin contact : Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use
recognised skin cleanser. Do NOT use solvents or thinners.
Ingestion : If swallowed, seek medical advice immediately and show this container or label. Keep person warm
and at rest. Do not induce vomiting unless directed to do so by medical personnel. Lower the head so
that vomit will not re-enter the mouth and throat.

Version: 0.04 Page: 2/11

Safety Data Sheet
Hempaguard X7 89909 Base

SECTION 4: First aid measures

Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is suspected that
fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing
apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Wash contaminated clothing thoroughly with water before removing it, or wear gloves.

4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact : Causes serious eye damage.
Inhalation : Toxic if inhaled.
Skin contact : Causes skin irritation.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
pain or irritation
redness
blistering may occur
Ingestion : Adverse symptoms may include the following:
stomach pains

4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : If gasses have been inhaled, from the decomposition of the product, symptoms may be delayed. Treat
symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested
or inhaled.
Specific treatments : No specific treatment.

SECTION 5: Firefighting measures

5.1 Extinguishing media

Extinguishing media : Recommended: alcohol resistant foam, CO2, powders, water spray.
Not to be used : waterjet.

5.2 Special hazards arising from the substance or mixture

Hazards from the substance or Flammable liquid and vapour. Runoff to sewer may create fire or explosion hazard. In a fire or if
mixture : heated, a pressure increase will occur and the container may burst, with the risk of a subsequent
explosion. This material is very toxic to aquatic life with long lasting effects. Fire water contaminated
with this material must be contained and prevented from being discharged to any waterway, sewer or
drain.
Hazardous combustion products : Decomposition products may include the following materials: carbon oxides nitrogen oxides sulfur
oxides halogenated compounds metal oxide/oxides

5.3 Advice for firefighters

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any
personal risk or without suitable training. Fire will produce dense black smoke. Exposure to decomposition products may cause a health
hazard. Cool closed containers exposed to fire with water. Do not release runoff from fire to drains or watercourses. Fire-fighters should
wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode. Clothing for fire-fighters (including helmets, protective boots and gloves) conforming to European standard EN 469 will provide a
basic level of protection for chemical incidents.

Version: 0.04 Page: 3/11

Safety Data Sheet
Hempaguard X7 89909 Base

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Avoid all direct contact with the spilled material. Exclude sources of ignition and be aware of explosion hazard. Ventilate the area. Avoid
breathing vapour or mist. Refer to protective measures listed in sections 7 and 8. No action shall be taken involving any personal risk or
without suitable training. If the product contaminates lakes, rivers, or sewers, inform the appropriate authorities in accordance with local
regulations.

6.2 Environmental precautions

Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product
has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the environment if released
in large quantities.

6.3 Methods and material for containment and cleaning up

Stop leak if without risk. Move containers from spill area. Approach the release from upwind. Prevent entry into sewers, water courses,
basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local
regulations (see Section 13). Use spark-proof tools and explosion-proof equipment. Contaminated absorbent material may pose the same
hazard as the spilt product.

6.4 Reference to other sections

See Section 1 for emergency contact information.
See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.

SECTION 7: Handling and storage

7.1 Precautions for safe handling

Vapors are heavier than air and may spread along floors. Vapors may form explosive mixtures with air. Prevent the creation of flammable or
explosive concentrations of vapors in air and avoid vapor concentrations higher than the occupational exposure limits. In addition, the
product should be used only in areas from which all naked lights and other sources of ignition have been excluded. Electrical equipment
should be protected to the appropriate standard. To dissipate static electricity during transfer, ground drum and connect to receiving
container with bonding strap. No sparking tools should be used.
Avoid inhalation of vapour, dust and spray mist. Avoid contact with skin and eyes. Eating, drinking and smoking should be prohibited in area
where this material is handled, stored and processed. Appropriate personal protective equipment: see Section 8. Always keep in containers
made from the same material as the original one.

7.2 Conditions for safe storage, including any incompatibilities

Store in accordance with local regulations. Store in a cool, well-ventilated area away from incompatible materials and ignition sources.
Keep out of the reach of children. Keep away from: Oxidizing agents, strong alkalis, strong acids. No smoking. Prevent unauthorized
access. Containers that are opened must be carefully resealed and kept upright to prevent leakage.
Storage : Do not store above the following temperature: 25 °C

7.3 Specific end use(s)

See separate Product Data Sheet for recommendations or industrial sector specific solutions.
Specific end use(s) : Antifouling products.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Product/ingredient name Exposure limit values

xylene EH40/2005 WELs (United Kingdom (UK), 1/2020). [xylene, o-,m-,p- or mixed
isomers] Absorbed through skin.
STEL: 441 mg/m³ 15 minutes.
TWA: 50 ppm 8 hours.
TWA: 220 mg/m³ 8 hours.
STEL: 100 ppm 15 minutes.
copper pyrithione EH40/2005 WELs (United Kingdom (UK), 1/2020). [Copper and compounds]
STEL: 2 mg/m³, (as Cu) 15 minutes. Form: Dusts and Mists
TWA: 1 mg/m³, (as Cu) 8 hours. Form: Dusts and Mists
ethylbenzene EH40/2005 WELs (United Kingdom (UK), 1/2020). Absorbed through skin.
STEL: 552 mg/m³ 15 minutes.
STEL: 125 ppm 15 minutes.
TWA: 441 mg/m³ 8 hours.
TWA: 100 ppm 8 hours.

Version: 0.04 Page: 4/11

Safety Data Sheet
Hempaguard X7 89909 Base

SECTION 8: Exposure controls/personal protection

toluene EH40/2005 WELs (United Kingdom (UK), 1/2020). Absorbed through skin.
STEL: 384 mg/m³ 15 minutes.
TWA: 191 mg/m³ 8 hours.
TWA: 50 ppm 8 hours.
STEL: 100 ppm 15 minutes.

Recommended monitoring procedures

If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to
determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment.
Reference should be made to monitoring standards, such as the following: European Standard EN 689 (Workplace atmospheres -
Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy)
European Standard EN 14042 (Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure
to chemical and biological agents) European Standard EN 482 (Workplace atmospheres - General requirements for the performance of
procedures for the measurement of chemical agents) Reference to national guidance documents for methods for the determination of
hazardous substances will also be required.
Derived effect levels
Not applicable.
Predicted effect concentrations
Not applicable.

8.2 Exposure controls

Appropriate engineering controls
Arrange sufficient ventilation by local exhaust ventilation and good general ventilation to keep the airborne concentrations of vapors or dust
lowest possible and below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-
station location.
Individual protection measures
General : Gloves must be worn for all work that may result in soiling. Apron/coveralls/protective clothing must be
worn when soiling is so great that regular work clothes do not adequately protect skin against contact
with the product. Safety eyewear should be used when there is a likelihood of exposure.

Hygiene measures : Wash hands, forearms, and face thoroughly after handling compounds and before eating, smoking,
using lavatory, and at the end of day.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk assessment
indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is
possible, the following protection should be worn, unless the assessment indicates a higher degree of
protection: chemical splash goggles and/or face shield. If inhalation hazards exist, a full-face
respirator may be required instead.
Hand protection : Wear chemical-resistant gloves (tested to EN374) in combination with 'basic' employee training. The
quality of the chemical-resistant protective gloves must be chosen as a function of the specific
workplace concentrations and quantity of hazardous substances.
Since the actual work situation is unknown. Supplier of gloves should be contacted in order to find the
appropriate type. Below listed glove(s) should be regarded as generic advice:

Recommended: Silver Shield / Barrier / 4H gloves, polyvinyl alcohol (PVA), Viton®

May be used: nitrile rubber
Short term exposure: neoprene rubber, butyl rubber, natural rubber (latex), polyvinyl chloride (PVC)

Body protection : Personal protective equipment for the body should be selected based on the task being performed and
the risks involved handling this product.
Wear suitable protective clothing. Always wear protective clothing when spraying.
Respiratory protection : When the product is applied by spraying and for continuous or prolonged work always wear an air-fed
respirator e.g. hood with supply of fresh or compressed air or a full face, powered air purifying filter.
Respirator selection must be based on known or anticipated exposure levels, the hazards of the
product and the safe working limits of the selected respirator. If working areas have insufficient
ventilation: When the product is applied by means that will not generate an aerosol such as, brush or
roller wear half or totally covering mask equipped with gas filter of type A, when grinding use particle
filter of type P. Be sure to use an approved/certified respirator or equivalent.
Environmental exposure controls

Version: 0.04 Page: 5/11

Safety Data Sheet
Hempaguard X7 89909 Base

SECTION 8: Exposure controls/personal protection

Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental
protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to
reduce emissions to acceptable levels.

SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties

Physical state : Liquid.
Colour : Green.
Odour : Solvent-like
pH : Testing not relevant or not possible due to nature of the product.
Melting point/freezing point : Testing not relevant or not possible due to nature of the product.
Boiling point/boiling range : Testing not relevant or not possible due to nature of the product.
Flash point : Closed cup: 23°C (73.4°F)
Evaporation rate : Testing not relevant or not possible due to nature of the product.
Flammability : Highly flammable in the presence of the following materials or conditions: open flames, sparks and
static discharge and heat.
Lower and upper explosive 0.8 - 6.7 vol %
(flammable) limits :
Vapour pressure : Testing not relevant or not possible due to nature of the product.
Vapour density : Testing not relevant or not possible due to nature of the product.
Specific gravity : 1.03 g/cm³
Partition coefficient (LogKow) : Testing not relevant or not possible due to nature of the product.
Auto-ignition temperature : Lowest known value: 430°C (806°F) (polydimethylsiloxane silicone).
Decomposition temperature : Testing not relevant or not possible due to nature of the product.
Viscosity : Aspiration hazard (H304) Not classified. Testing not relevant due to nature of the product.
Explosive properties : Testing not relevant or not possible due to nature of the product.
Oxidising properties : Testing not relevant or not possible due to nature of the product.

9.2 Other information

Solvent(s) % by weight : Weighted average: 24 %
Water % by weight : Weighted average: 0 %
VOC content : 248.5 g/l
VOC content, Ready-for-use 282 g/l
mixture :
TOC Content : Weighted average: 223 g/l
Solvent Gas : Weighted average: 0.056 m³/l

SECTION 10: Stability and reactivity

10.1 Reactivity
No specific test data related to reactivity available for this product or its ingredients.

10.2 Chemical stability

The product is stable.

10.3 Possibility of hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

10.4 Conditions to avoid

Avoid all possible sources of ignition (spark or flame). Do not pressurise, cut, weld, braze, solder, drill, grind or expose containers to heat
or sources of ignition.

10.5 Incompatible materials

Version: 0.04 Page: 6/11

Safety Data Sheet
Hempaguard X7 89909 Base

SECTION 10: Stability and reactivity

Highly reactive or incompatible with the following materials: oxidising materials.
Reactive or incompatible with the following materials: reducing materials.

10.6 Hazardous decomposition products

When exposed to high temperatures (i.e. in case of fire) harmful decomposition products may be formed:
Decomposition products may include the following materials: carbon oxides nitrogen oxides sulfur oxides halogenated compounds metal
oxide/oxides

SECTION 11: Toxicological information

11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008

Exposure to component solvent vapor concentrations may result in adverse health effects such as mucous membrane and respiratory
system irritation and adverse effects on the kidneys, liver and central nervous system. Solvents may cause some of the above effects by
absorption through the skin. Symptoms and signs include headaches, dizziness, fatigue, muscular weakness, drowsiness and, in extreme
cases, loss of consciousness. Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin, resulting
in non-allergic contact dermatitis and absorption through the skin. If splashed in the eyes, the liquid may cause irritation and reversible
damage. Accidental swallowing may cause stomach pain. Chemical lung inflammation may occur if the product is taken into the lungs via
vomiting.
Acute toxicity
Product/ingredient name Result Species Dose Exposure
xylene LC50 Inhalation Gas. Rat 5000 ppm 4 hours
LC50 Inhalation Vapour Rat 6350 ppm 4 hours
LD50 Dermal Rabbit >4200 mg/kg -
LD50 Oral Rat 3523 mg/kg -
copper pyrithione LC50 Inhalation Dusts and mists Rat 0.07 mg/l 4 hours
LD50 Dermal Rabbit >2000 mg/kg -
LD50 Oral Rat 1075 mg/kg -
ethylbenzene LD50 Dermal Rabbit >5000 mg/kg -
LD50 Oral Rat 3500 mg/kg -
toluene LC50 Inhalation Vapour Rat >20 mg/l 4 hours
LD50 Oral Rat 636 mg/kg -
octamethylcyclotetrasiloxane LC50 Inhalation Dusts and mists Rat 36 mg/l 4 hours
LD50 Dermal Rat >2400 mg/kg -
LD50 Oral Rat >4800 mg/kg -
Acute toxicity estimates
Product/ingredient name Oral Dermal Inhalation Inhalation Inhalation
mg/kg mg/kg (gases) (vapours) (dusts and
ppm mg/l mists)
mg/l
Hempaguard X7 89909 Base 13712.8 5827.7 21550.1 282.5 0.89
xylene 3523 1100 5000
copper pyrithione 1075 0.07
ethylbenzene 3500 4500 11
octamethylcyclotetrasiloxane 36
Irritation/Corrosion
Product/ingredient name Result Species Score Exposure
xylene Eyes - Severe irritant Rabbit - 24 hours 5 milligrams
Skin - Irritant Rabbit - -
Skin - Moderate irritant Rabbit - 24 hours 500 milligrams
copper pyrithione Eyes - Severe irritant Rabbit - -
ethylbenzene Eyes - Mild irritant Rabbit - -
Respiratory - Mild irritant Rabbit - -
Skin - Mild irritant Rabbit - 24 hours 15 milligrams
toluene Eyes - Mild irritant Rabbit - 0.5 minutes 100 milligrams
Skin - Moderate irritant Rabbit - 24 hours 20 milligrams
octamethylcyclotetrasiloxane Eyes - Mild irritant Rabbit - 24 hours 500 milligrams
Skin - Mild irritant Rabbit - 24 hours 500 milligrams
Mutagenic effects
No known significant effects or critical hazards.

Carcinogenicity
No known significant effects or critical hazards.

Reproductive toxicity
No known significant effects or critical hazards.

Version: 0.04 Page: 7/11

Safety Data Sheet
Hempaguard X7 89909 Base

SECTION 11: Toxicological information

Teratogenic effects
No known significant effects or critical hazards.

Specific target organ toxicity (single exposure)

Product/ingredient name Category Route of exposure Target organs
toluene Category 3 Narcotic effects

Specific target organ toxicity (repeated exposure)

Product/ingredient name Category Route of exposure Target organs
ethylbenzene Category 2 - hearing organs
toluene Category 2 - -
Aspiration hazard
Product/ingredient name Result
ethylbenzene ASPIRATION HAZARD - Category 1
toluene ASPIRATION HAZARD - Category 1
Information on likely routes of exposure
Routes of entry anticipated: Oral, Dermal, Inhalation.
Potential chronic health effects
No known significant effects or critical hazards.

11.2 Information on other hazards

Other information : No additional known significant effects or critical hazards.

SECTION 12: Ecological information

12.1 Toxicity
Do not allow to enter drains or watercourses. Very toxic to aquatic life with long lasting effects.
Product/ingredient name Result Species Exposure
copper pyrithione Acute EC50 0.022 mg/l Daphnia 48 hours
Acute LC50 0.0043 mg/l Fish 96 hours
ethylbenzene Chronic NOEC <1000 μg/l Fresh water Algae - Pseudokirchneriella subcapitata 96 hours
toluene Chronic NOEC <500000 μg/l Fresh water Algae - Pseudokirchneriella subcapitata 96 hours
Chronic NOEC 1000 μg/l Fresh water Daphnia - Daphnia magna 21 days
octamethylcyclotetrasiloxane Acute EC50 >0.022 mg/l Algae 96 hours
Acute EC50 0.015 mg/l Daphnia 48 hours
Acute LC50 >0.022 mg/l Fish 96 hours
Chronic NOEC 1.7 - 15 μg/l Fresh water Daphnia - Daphnia magna 21 days
Chronic NOEC 4.4 μg/l Fresh water Fish - Oncorhynchus mykiss - Egg 93 days

12.2 Persistence and degradability

Product/ingredient name Test Result Dose Inoculum
xylene OECD 301F Ready 90 - 98 % - Readily - 28 days - -
Biodegradability - Manometric
Respirometry Test
- >60 % - Readily - 28 days - -
ethylbenzene - >70 % - Readily - 28 days - -
toluene - 100 % - Readily - 14 days - -
octamethylcyclotetrasiloxane OECD 310 Ready Biodegradability - 3.7 % - Not readily - 28 days - -
CO2 in Sealed Vessels
(Headspace Test)

Product/ingredient name Aquatic half-life Photolysis Biodegradability

xylene - - Readily
ethylbenzene - - Readily
toluene - - Readily
octamethylcyclotetrasiloxane - - Not readily

12.3 Bioaccumulative potential

Version: 0.04 Page: 8/11

Safety Data Sheet
Hempaguard X7 89909 Base

SECTION 12: Ecological information

Product/ingredient name LogPow BCF Potential

xylene 3.12 8.1 - 25.9 low
copper pyrithione - 50 low
ethylbenzene 3.6 - low
toluene 2.73 90 low
octamethylcyclotetrasiloxane 6.488 13400 high

12.4 Mobility in soil

Soil/water partition coefficient No known data avaliable in our database.
(KOC) :
Mobility : No known data avaliable in our database.

12.5 Results of PBT and vPvB assessment

Product/ingredient name PBT P B T vPvB vP vB
xylene No N/A No No No N/A No
copper pyrithione No N/A No No No N/A No
toluene No N/A No Yes No N/A No
octamethylcyclotetrasiloxane SVHC Specified Specified Specified SVHC Specified Specified
(Recommended) (Recommended)

12.6 Other adverse effects

No known significant effects or critical hazards.

SECTION 13: Disposal considerations

13.1 Waste treatment methods

The generation of waste should be avoided or minimised wherever possible. Residues of the product is listed as hazardous waste. Dispose
of according to all state and local applicable regulations. Waste should not be disposed of untreated to the sewer unless fully compliant with
the requirements of all authorities with jurisdiction. Spillage, remains, discarded clothes and similar should be discarded in a fireproof
container.
European waste catalogue no. (EWC) is given below.
European waste catalogue (EWC) : 08 01 11*
Packaging
The generation of waste should be avoided or minimised wherever possible. Waste packaging should be recycled. Incineration or landfill
should only be considered when recycling is not feasible.

SECTION 14: Transport information

Transport may take place according to national regulation or ADR for transport by road, RID for transport by train, IMDG for transport by
sea, IATA for transport by air.
14.1 14.2 14.3 14.4 14.5
UN / ID no. Proper shipping name Transport hazard class(es) PG* Env* Additional information

ADR/RID UN2929 TOXIC LIQUID FLAMMABLE, 6.1 II Yes. The environmentally

Class ORGANIC, N.O.S. (copper pyrithione, 3 hazardous substance mark
xylene) is not required when
transported in sizes of ≤5 L
or ≤5 kg.
Tunnel code (D/E)

IMDG UN2929 TOXIC LIQUID FLAMMABLE, 6.1 II Yes. The marine pollutant
Class ORGANIC, N.O.S. (xylene). (copper 3 mark is not required
pyrithione) when transported in
sizes of ≤5 L or ≤5 kg.
Emergency schedules
F-E, S-D

IATA UN2929 TOXIC LIQUID FLAMMABLE, 6.1 II Yes. The environmentally

Class ORGANIC, N.O.S. (copper pyrithione, 3 hazardous substance mark
xylene) may appear if required by
other transportation
regulations.
PG* : Packing group
Env.* : Environmental hazards

Version: 0.04 Page: 9/11

Safety Data Sheet
Hempaguard X7 89909 Base

SECTION 14: Transport information

14.6 Special precautions for user

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the
product know what to do in the event of an accident or spillage.
14.7 Maritime transport in bulk according to IMO instruments
Not applicable.

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH) Annex XIV - List of substances subject to authorisation - Substances of very high concern
Annex XIV
None of the components are listed.
Substances of very high concern
Ingredient name Intrinsic property Status Reference number Date of revision
octamethylcyclotetrasiloxane PBT Recommended ED/71/2019 4/14/2021
octamethylcyclotetrasiloxane vPvB Recommended ED/71/2019 4/14/2021
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Not applicable.
Other EU regulations
Seveso category This product is controlled under the Seveso III Directive.
Seveso category
H2: Acute toxicity 2 any route of entry or Acute toxicity 3 Inhalation route of entry or Note 7
P5c: Flammable liquids 2 and 3 not falling under P5a or P5b
E1: Hazardous to the aquatic environment - Acute 1 or Chronic 1
Biocidal Products Regulations
Restrictions on use : Product is not intended for consumer use.
Directions for use and dose rate : Spray or Roller application or brushing
Dose: See separate Product Data Sheet, Application instructions or label.
Additional information : (Product Type: 21 - Antifouling products) Liquid. Wear suitable protective clothing, gloves and eye/face
protection. In case of contact with eyes, rinse immediately with plenty of water. If swallowed, seek
medical advice immediately and show the container or label. This material and its container must be
disposed of as hazardous waste. Avoid release to the environment. Refer to special instructions/safety
data sheet.
International regulations
IMO Anti-fouling System Convention Compliant (AFS/CONF/26)
This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of
Harmful Anti-fouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26)
Product type : Fouling defence coating
Manufacturer : Hempel A/S
Product name and/or code : Hempaguard X7 89909 Base

8990919740
Colour : Green.
Note: This name is shown on the product container. All products in HEMPEL's containers carrying this name comply with the IMO
Convention (AFS/CONF/26).
Active ingredient(s) : copper pyrithione 14915-37-8

15.2 Chemical safety assessment

Not applicable.

Version: 0.04 Page: 10/11

Safety Data Sheet
Hempaguard X7 89909 Base

SECTION 16: Other information

Abbreviations and acronyms : ATE = Acute Toxicity Estimate
CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No. 1272/2008]
EUH statement = CLP-specific Hazard statement
RRN = REACH Registration Number
DNEL = Derived No Effect Level
PNEC = Predicted No Effect Concentration
Full text of abbreviated H statements : H225 Highly flammable liquid and vapour.
H226 Flammable liquid and vapour.
H302 Harmful if swallowed.
H304 May be fatal if swallowed and enters airways.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H330 Fatal if inhaled.
H331 Toxic if inhaled.
H332 Harmful if inhaled.
H336 May cause drowsiness or dizziness.
H361d Suspected of damaging the unborn child.
H361f Suspected of damaging fertility.
H373 May cause damage to organs through prolonged or repeated exposure.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
Full text of classifications [CLP/GHS] : Acute Tox. 2 ACUTE TOXICITY - Category 2
Acute Tox. 3 ACUTE TOXICITY - Category 3
Acute Tox. 4 ACUTE TOXICITY - Category 4
Aquatic Acute 1 SHORT-TERM (ACUTE) AQUATIC HAZARD - Category 1
Aquatic Chronic 1 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 1
Asp. Tox. 1 ASPIRATION HAZARD - Category 1
Eye Dam. 1 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1
Flam. Liq. 2 FLAMMABLE LIQUIDS - Category 2
Flam. Liq. 3 FLAMMABLE LIQUIDS - Category 3
Repr. 2 REPRODUCTIVE TOXICITY - Category 2
Skin Irrit. 2 SKIN CORROSION/IRRITATION - Category 2
STOT RE 2 SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE - Category 2
STOT SE 3 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE - Category 3
Classification Justification
FLAMMABLE LIQUIDS On basis of test data
ACUTE TOXICITY (inhalation) Calculation method
SKIN CORROSION/IRRITATION Calculation method
SERIOUS EYE DAMAGE/EYE IRRITATION Calculation method
SHORT-TERM (ACUTE) AQUATIC HAZARD Calculation method
LONG-TERM (CHRONIC) AQUATIC HAZARD Calculation method

Notice to reader
Indicates information that has changed from previously issued version.
The information contained in this safety data sheet is based on the present state of knowledge and EU and national legislation. It provides
guidance on health, safety and environmental aspects for handling the product in a safe way and should not be construed as any guarantee
of the technical preformance or suitability for particular applications.
It is always the duty of the user/employer to ascertain that the work is planned and carried out in accordance with the national regulations.

Version: 0.04 Page: 11/11