SLOPE- SLOPE-

2:1 2:1

EMBANKMENT TOP
R.L +55.90

5000

5000
WEIR AXIS

EMBANKMENT TOP
R.L +55.90
300
11200 11500 20000

6000 11000 10500

2500 1250 7750
3500 3500 3500 SLOPE-
2500 2500 2500 2500 SLOPE- SLOPE-
2750 2750 2:1 SLOPE-
2:1 2:1
2:1
SLOPE-
2:1
600x600x300 CC BLOCK(M15) OVER
5000

500

5000
FILTER UP TO LENGTH 50 M D/S
5000

550 500

5000

5000
LENGTH AS PER SITE CONDITION 600x600x300 CC BLOCK(M15) OVER
1000

FILTER UP TO LENGTH 50 M U/S

600

600
1200
2000
15000 20000 500
10000 4500 2000 2000 9000 7325 13700 1500 7500

2000
1200 MM CRATED BOULDER PITCHING 12225
R.L +50.00 R.L +47.50

3650

3650
600
1000

R.L +48.50 25000

1500
7150
P1
FLOW 1200 MM CRATED BOULDER PITCHING

7150
X X
500

5000
EXPANSION JOINT
500

3000
WITH SEAL 1
JOINT WITH SEAL
SLOPE-
2:1 0
00
R3 P2
R.L +50.00 FRICTION BLOCK
B U/S SLOPE 2 : 1 B
2
A 500

3000
3650 6000 4000 2000 6600 12000 7325 500
8000 15000

1200X1200X600 C.C BLOCK OVER

FLOW

1200X1200X600 C.C BLOCK OVER

300 MM THICK GRADED FILTER

5750

300 MM THICK GRADED FILTER

9500 12000
1200 MM CRATED BOULDER PITCHING

16500
1200 MM CRATED BOULDER PITCHING
P3 TO BE NEGOTIATED
AXIS OF H/R CISTERN WITH RIVER BED
R.L +50.00
TO BE NEGOTIATED 3 R.L +49.80
LEVEL

3000
WITH RIVER BED D/S GLACIS SLOPE 3:1
LEVEL

P4 R.L +50.80

500
30
EXPANSION JOINT

00
WITH SEAL 3000 CHUTE BLOCK
4

3000
A A
1200 MM CRATED BOULDER PITCHING

7150
7150
1200 MM CRATED BOULDER PITCHING

1500
P5
R.L +50.00

3650
R.L +50.00 R.L +48.50

2000
R.L +47.50

600

1200
600x600x300 CC BLOCK(M15) OVER
FILTER UP TO LENGTH 50 M U/S SLOPE-
550 2:1

5000
500

5000
600x600x300 CC BLOCK(M15) OVER
FILTER UP TO LENGTH 50 M D/S

SLOPE- SLOPE-
2:1 SLOPE- 3550 3550 3550 3250 3625 3625 3250 3250 3250 3250 3250 3250
2:1
2:1
SLOPE- VERTICAL JOINT VERTICAL JOINT VERTICAL JOINT
2:1 WITH SEAL WITH SEAL WITH SEAL
11200 2500 9000 20000

5000

5000
SLOPE-
2:1
EMBANKMENT TOP
R.L +55.90

EMBANKMENT TOP
R.L +55.90
SLOPE-
2:1

NOTES: HYDRAULIC PARTICULARS OF WEIR

1. All dimensions are in millimeter unless otherwise mentioned & levels in meter . Only
EMBANKMENT TOP
R.L +55.90 written dimensions are to be followed.
600x600x300 CC BLOCK(M15) OVER FILTER 2. 25 mm premoulded bituminous expansion pad shall be provided at expansion joint.
UP TO LENGTH 75 M U/S AND 50 M D/S 5000
3. Position of Returnwalls, Railings, Guard post, shall be decided by Engineer in charge.
R.L +55.90
4. Water spouts of 100mm dia G.I pipe are provided @ 3 m c/c.
RIVER SIDE
2H 2.5 H
COUNTRY SIDE 5. Concrete shall have minimum 28 days characteristic strength on 150 mm cubes for
BOULDER IN BED
1V 1V SLOPE-
2:1
elements of superstructure shall be 20Mpa.
6. High strength O.P.C should be used of 43 Grade conforming to IS: 12269.
500
7. All reinforcement bars shall be HYSD Fe-500 conforming to IS:1786-2008.
N.S.L
8. Cover in deck slab is 40 mm.
3000 9. Available suitable steel sheet pile conforming to I.S2314-1986.
500

10. R.C.C Work shall be conform to IS 456-2000.

1500 SECTION OF U/S & D/S RIVER AFFLUX & GUIDE BUND
11. The section of various component may be adjusted as per site
12. Any discrepancy noticed in the drawing should be brought to the notice of the chief
engineer.
13. The minimum cover in bottom raft is 60 mm and in other component 40 mm.
SPECIFICATION OF MATERIAL TO BE USED 14. Earthen embankment of bund must be negotiated.
15. Angle of internal friction of back fill material of wing wall and abutment should not be
less then 30 deg.
16. Joint with water seal shall be provided at all junction of structure. GOVT. OF BIHAR
17. The actual dimension of block outs , embedded parts & gate shall be obtained from gate WATER RESOURCES DEPARTMENT

design. CHIEF ENGINEER , IRRIGATION CREATION W.R.D DARBHANGA

CONSTRUCTION OF GATED WEIR & ALLIED STRUCTURES IN THE
RIVER SUGERWAY AT MADANPATTI , PHULPARAS BLOCK MADHUBANI

GENERAL LAYOUT PLAN FOR MADANPATTI WEIR ON RIVER SUGARWAY Western Kosi Canal division
Jhanjharpur
Design and Mont. Division
Darbhanga
Approved by
Western Kosi Canal Circle
Jhanjharpur

Design and Mont. Circle IRRIGATION CREATION W.R.D DARBHANGA

Darbhanga